Data Type Conversion - Numeric To Char
Jul 12, 2000I would like to know how to translate a numeric value = 3 to a text or char value = 03.
Any input would be appreciated.
Thanks,
Joel
ADVERTISEMENT
Index Creation Causes Error The Conversion Of A Char Data Type To A Datetime Data Type Resulted...
Jul 23, 2005Hi all,I have a table called PTRANS with few columns (see create script below).I have created a view on top that this table VwTransaction (See below)I can now run this query without a problem:select * from dbo.VwTransactionwhereAssetNumber = '101001' andTransactionDate <= '7/1/2003'But when I create an index on the PTRANS table using the command below:CREATE INDEX IDX_PTRANS_CHL# ON PTRANS(CHL#)The same query that ran fine before, fails with the error:Server: Msg 242, Level 16, State 3, Line 1The conversion of a char data type to a datetime data type resulted inan out-of-range datetime value.I can run the same query by commeting out the AssetNumber clause and itworks fine. I can also run the query commenting out the TransactionDatecolumn and it works fine. But when I have both the conditions in theWHERE clause, it gives me this error. Dropping the index solves theproblem.Can anyone tell me why an index would cause a query to fail?Thanks a lot in advance,AmirCREATE TABLE [PTRANS] ([CHL#] [varchar] (100) COLLATE SQL_Latin1_General_CP1_CI_AS NULL ,[CHCENT] [numeric](2, 0) NOT NULL ,[CHYYMM] [numeric](4, 0) NOT NULL ,[CHDAY] [numeric](2, 0) NOT NULL ,[CHTC] [char] (2) COLLATE SQL_Latin1_General_CP1_CI_AS NOT NULL) ON [PRIMARY]GOCREATE VIEW dbo.vwTransactionsASSELECT CONVERT(datetime, dbo.udf_AddDashes(REPLICATE('0', 2 -LEN(CHCENT)) + CONVERT(varchar, CHCENT) + REPLICATE('0', 4 -LEN(CHYYMM))+ CONVERT(varchar, CHYYMM) + REPLICATE('0', 2 -LEN(CHDAY)) + CONVERT(varchar, CHDAY)), 20) AS TransactionDate,CHL# AS AssetNumber,CHTC AS TransactionCodeFROM dbo.PTRANSWHERE (CHCENT <> 0) AND (CHTC <> 'RA')*** Sent via Developersdex http://www.developersdex.com ***Don't just participate in USENET...get rewarded for it!
View 1 Replies View RelatedChar Data Type Conversion
Sep 11, 2006im trying to convert char (18) data type to decimal (18,6) but it wont let me do it. It gives an arithematic error. what would be other way to solve this problem. Can i do it with float if yes how so? or any other suggested way. Thanks
View 6 Replies View RelatedSystem.Data.SqlClient.SqlException: The Conversion Of A Char Data Type To A Datetime Data Type Resulted In An Out-of-range Datetime Value.
Dec 14, 2005After testing out the application i write on the local pc. I deploy it to the webserver to test it out. I get this error.
System.Data.SqlClient.SqlException: The conversion of a char data type to a
datetime data type resulted in an out-of-range datetime value.
Notes: all pages that have this error either has a repeater or datagrid which load data when page loading.
At first I thought the problem is with the date, but then I can see
that some other pages that has datagrid ( that has a date field) work
just fine.
anyone having this problem before?? hopefully you guys can help.
Thanks,
The Conversion Of A Char Data Type To A Datetime Data Type!!
May 13, 2008hello all .. I have a form that includes two textboxes (Date and Version) .. When I try to insert the record I get the following error message .. seems that something wrong with my coversion (Data type)"The conversion of a char data type to a datetime data type resulted in an out-of-range datetime value.The statement has been terminated."
in my SQL database I have the date feild as datetime and the version as nvarchar(max)
this is the code in the vb page .. Can you please tell me how to solve this problem?Imports System.Data.SqlClient
Imports system.web.configuration
Partial Class Admin_emag_insert
Inherits System.Web.UI.Page
Protected Sub Page_Load(ByVal sender As Object, ByVal e As System.EventArgs) Handles Me.Load
Record_DateTextBox.Text = DateTime.Now
End Sub
Protected Sub clearButton_Click(ByVal sender As Object, ByVal e As System.EventArgs) Handles clearButton.Click
Me.VersionTextBox.Text = ""
End Sub
Protected Sub addButton_Click(ByVal sender As Object, ByVal e As System.EventArgs) Handles addButton.Click
Dim objConnection As SqlConnection
Dim objDataCommand As SqlCommand
Dim ConnectionString As String
Dim record_date As Date
Dim version As String
Dim emagSQL As String
'save form values in variables
record_date = Record_DateTextBox.Text
version = VersionTextBox.Text
ConnectionString = WebConfigurationManager.ConnectionStrings("HRDBConnectionString").ConnectionString
'Create and open the connection
objConnection = New SqlConnection(ConnectionString)
objConnection.Open()
emagSQL = "Insert into E_Magazine (Record_Date, Version ) " & _
"values('" & record_date & "','" & version & "')"
'Create and execute the command
objDataCommand = New SqlCommand(emagSQL, objConnection)
objDataCommand.ExecuteNonQuery()
objConnection.Close()
AddMessage.Text = "A new emagazine was added successfully"
Me.VersionTextBox.Text = ""
End Sub
End Class
Getting Error : : The Conversion Of A Char Data Type To A Datetime Data Type Resulted In An Out-of-range Datetime Value
Jan 28, 2008update tblPact_2008_0307 set student_dob = '30/01/1996' where student_rcnumber = 1830when entering update date in format such as ddmmyyyyi know the sql query date format entered should be in mmddyyyy formatis there any way to change the date format entered to ddmmyyyy in sql query?
View 5 Replies View RelatedThe Conversion Of A Char Data Type To A Datetime Data Type Resulted In An Out-of-range Datetime Value.
Apr 19, 2008Advance thanks ....... My table is TimeSheet:----------------------------------- CREATE TABLE [dbo].[TimeSheet]( [autoid] [int] IDENTITY(1,1) NOT NULL, [UserId] [int] NOT NULL, [starttime] [datetime] NOT NULL, [endtime] [datetime] NOT NULL, [summary] [nvarchar](50) NOT NULL, [description] [nvarchar](50) NULL, [dtOfEntry] [datetime] NOT NULL, [Cancelled] [bit] NULL) ON [PRIMARY] My Query is------------------ insert into timesheet (UserId, StartTime,EndTime, Summary, Description,DtOfEntry) values (2, '19/04/2008 2:05:06 PM', '19/04/2008 2:05:06 PM', '66', '6666','19/04/2008 2:05:06 PM')i m not able to insert value Error Message is-------------------------Msg 242, Level 16, State 3, Line 1The conversion of a char data type to a datetime data type resulted in an out-of-range datetime value.The statement has been terminated. can any body give any solution
View 5 Replies View RelatedThe Conversion Of A Char Data Type To A Datetime Data Type Resulted In An Out-of-range Datetime Value.
Aug 3, 2005Hey, I have a big problem that i wanna search data from SQL by DateTime like thatselect * from test where recorddate='MyVariableWhichHoldDate'i use variable that holds Date info.i searched a lot infomation on net but there is no perfect solution. i know why this occur but there is no function to solve this problem. i used a lot of ways. it accept yyyy-mm-dd format but my variable format is dd-mm-yyyyy . is there any function for this problem? and any other solution.thanks for ur attentionregards
View 6 Replies View RelatedThe Conversion Of Char Data Type To Smalldatetime Data Type Resulted In An Out-of-range Smalldatetime Value
Mar 30, 2007 I am using Visual Studio 2005 and SQL Express 2005. The database was converted from MS Access 2003 to SQL Express by using the upsize wizard.
I would like to store the current date & time in a column in a table. This column is a smalldatetime column called 'lastlogin'.
The code I'm using is:
Dim sqlcommand As New SqlCommand _
("UPDATE tableXYZ SET Loggedin = 'True', LastLogin = GetDate() WHERE employeeID = '" & intEmployeeID.ToString & "'", conn)
Try
conn.Open()
sqlcommand.ExecuteNonQuery()
conn.Close()
Catch ex As Exception
MessageBox.Show(ex.Message)
End Try
This code works fine on my local machine and local SQL server. However at the client side this code results in the error as mentioned in the subject of this thread. I first used 'datetime.now' instead of 'getdate()', but that caused the same error. Then I changed the code to 'getdate()', but the error still remains.
The server at the client is running Windows Server 2000 UK . My local machiine is running WIndows XP Dutch.
Maybe the conversion from Dutch to UK has something to do with it. But this should be solved by using the 'Getdate()' function..... ?
Character To Numeric Conversion Error- Select Statment On Char Column
Sep 18, 2007Hi guys/ladies I'm still having some trouble formatting a select statement correctly.
I am using a sqldatasource control on an aspx page. It is connecting via odbc string to an Informix database.
Here is my select statement cut down to the most basic elements.
SELECT commentFROM informix.ipr_stucomWHERE (comment > 70)
The column "comment" contains student grades ranging from 0-100 and the letters I, EE, P, F, etc. Therefore the column is of a char type. This is a problem because I cannot run the above statement without hitting an alpha record and getting the following error
"Character to numeric conversion error"
How can I write this statement where it will work in the datasource control and have it only look at numeric values and skip the alpha values?
I have tried case with cast and isnumeric... I don't think that I have the formating correct.
I have also used:
WHERE (NOT (comment = ' I' OR comment = ' EE' OR comment = ' NG' OR comment = ' WP' OR comment = ' WF' OR comment = ' P' OR comment = ' F'))
This works but is very clunky and could possibly break if other letters are input in the future. There has to be a better way.I am sorry for my ignorance and thanks again for your help.
Concatenation Two Numeric Type Using Conversion
Jun 3, 1999Hi,
Does anybody know how to get the next row using two numeic keys like this:
select * from cfg_trkgrp_t where (convert(varchar,column1 )+(convert(varchar,column2)) > (convert(varchar,0) + convert(varchar,1000 )))
note: colum1 and column2 are both numeric type, column 1 has value 0, column2
has value 1000
Seems like it does not work for me for different digits of values.
Thanks.
T-SQL (SS2K8) :: Arithmetic Overflow Error Converting Numeric To Data Type Numeric
Jun 10, 2014when I run below query I got Error of Arithmetic overflow error converting numeric to data type numeric
declare @a numeric(16,4)
set @a=99362600999900.0000
The 99362600999900 value before numeric is 14 and variable that i declared is of 16 length. Then why this error is coming ? When I set Length 18 then error removed.
Arithmetic Overflow Error Converting Numeric To Data Type Numeric
Mar 21, 2006Guys
I'm getting the above when trying to populate a variable. The values in question are :
@N = 21
@SumXY = -1303765191530058.2251000000
@SumXSumY = -5338556963168643.7875000000
When I run, SELECT (@N * @SumXY) - (@SumXSumY * @SumXSumY) in QA I get the result OK which is -28500190448996439680147097583285.072256 ie 32 places to left of decimal and 6 to the right
When I try the following ie to populate a variable with that value I get the error -
SELECT R2Top = (@N * @SumXY) - (@SumXSumY * @SumXSumY)@R2Top is NUMERIC (38, 10)
Any ideas ??
COnverting Numeric Data Type (Oracle) To Date Data Type Using SSIS
Mar 7, 2007We have some columns in a table where the date is stored as 19980101 (YYYYMMDD). The data type for this column is NUMBER(8) in Oracle.
I need to copy rows from Oracle to SQL Server using SSIS. I used the Data Conversion transformation editor to change it to DT_DATE, but the rows are not being inserted to the destination.
On Error, If I fail the component, then the error is :
There was an error with input column "ORDER_DATE_CONV" (1191) on input "OLE DB Destination Input" (29). The column status returned was: "Conversion failed because the data value overflowed the specified type.".
Regards
RH
Converting Numeric Data Type To Text Data Type
Jul 20, 2005Hi,I would like to convert a dollar amount ($1,500) to represent Fifteenhundred dollars and 00/100 cents only for SQL reporting purposes. Isthis possible and can I incorporate the statement into an existingleft outer join query.Thanks in advance,Gavin
View 1 Replies View RelatedData Conversion Numeric To Date
Jan 31, 2007I have some data which I am trying to put into a DM where I can use it as part of a cube (my first!!)
I have hit a small problem with dates, I get it from the ERP system as a numeric field, and I need to convert it to a date format. The intension is to use this converted data with Named Calculations to derive Year, month Day ect.
However I cannot seem to be able to convert and store (in SQL) this column can anyone advise
Thanks
SSIS Data Conversion From Numeric To Decimal
Oct 2, 2007I'm getting some data from a flat file with a SSIS Package, it comes a integer but I would like to converted to a decimal with a 3 scale.
Example:
Flat File: 2070015000950011800
In the data conversion I had it with a 3 scale, but what I got was this:20700.00015000.0009500.00011800.000But what I want is something like this:20.70015.0009.50011.800
I dont know if you guys get the idea. But I will apreciate if anyone can help me.
Thanks,
Erick
Bulk Insert Task Failing On Data Type Conversion For A Destination Column Of Type Bit
Jul 6, 2006I am trying to use the Bulk Insert Task to load from a csv file. My final column is a bit that is nullable. My file is an ID column that is int, a date column that is mm/dd/yyy, then 20 columns that are real, and a final column that is bit. I've tried various combinations of codepage and datafiletype on my task component. When I have RAW with Char, I get the error included below. If I change to RAW/Native or codepage 1252, I don't have an issue with the bit; however, errors start generating on the ID and date columns.
I have tried various data type settings on my flat file connection, too. I have tried DT_BOOL and the integer datatypes. Nothing seems to work.
I hope someone can help me work through this.
Thanks in advance,
SK
SSIS package "Package3.dtsx" starting.
Error: 0xC002F304 at Bulk Insert Task, Bulk Insert Task: An error occurred with the following error message: "Cannot fetch a row from OLE DB provider "BULK" for linked server "(null)".The OLE DB provider "BULK" for linked server "(null)" reported an error. The provider did not give any information about the error.The bulk load failed. The column is too long in the data file for row 1, column 24. Verify that the field terminator and row terminator are specified correctly.Bulk load data conversion error (type mismatch or invalid character for the specified codepage) for row 1, column 23 (cancelled).".
Error: 0xC002F304 at Bulk Insert Task 1, Bulk Insert Task: An error occurred with the following error message: "Cannot fetch a row from OLE DB provider "BULK" for linked server "(null)".The OLE DB provider "BULK" for linked server "(null)" reported an error. The provider did not give any information about the error.The bulk load failed. The column is too long in the data file for row 1, column 24. Verify that the field terminator and row terminator are specified correctly.Bulk load data conversion error (type mismatch or invalid character for the specified codepage) for row 1, column 23 (cancelled).".
Task failed: Bulk Insert Task 1
Task failed: Bulk Insert Task
Warning: 0x80019002 at Package3: The Execution method succeeded, but the number of errors raised (2) reached the maximum allowed (1); resulting in failure. This occurs when the number of errors reaches the number specified in MaximumErrorCount. Change the MaximumErrorCount or fix the errors.
SSIS package "Package3.dtsx" finished: Failure.
Data Conversion - Numeric To String Loosing Precision
Oct 26, 2006Hi All,
i'm using a "data conversion" object to convert a numeric field to a string just before i save the record set to the database.
the problem is when this numeric field is > 0 it looses the precision on its decimal value.
example, if numeric value is 0.32
after converting this to a string, the new value will be : .32
it's lost the 0 infront of it. i can't do this converion in the query level because it's a derived field, so i need to convert it to a string before stroing it.
when converting to string i'm using the code page 1252 (ANSI - Latin I). i also tried with unicode string both looses this 0 infront.
can any one help on this?
Numeric Data Type
Oct 19, 2000using this syntax numeric() can someone pls help me with the syntax to create a numeric column with a scale of 6 thanks
View 2 Replies View RelatedTrans Replication With Updating Subscriber On Sql2000 (single Quote In The Data As Char Data Type)
Nov 17, 2006Hi,
I am trying to setup Trans Replication with updating subscriber on sql2000. One column on few tables got data with single quote (').
How do I handle in this case? Did any one come across such case?
Can I Change default QUOTED IDENTIFIER from ' (single quote) to something else (@@@) on SQL2000?
If yes, how to do?
Thanks
mka
Data Conversion Failed From String To Numeric Returned Status Value 6 In Ssis
Sep 6, 2007Hi i am working on sending data from a dat file to table in sql server Database and i am using the Data conversion transformation in ssis to convert string of fixed length into numeric (11,5) which is the datatype for the price field in the table and its returning an error saying that status vale 6 and error text as Conersion Failed sue to overflow of specific type ... Can anyone let me know how to overcome this error.
View 6 Replies View RelatedChanging Data Type From Char To Datetime
Mar 2, 2007Thanks in adance
Platform: SQL 2000
A SQL table has a field named "pay-day" with Char(8) data type.
I tried to change its data type to datetime but only with an error message like this. I did right-click the table and tried to modify a data type.
- Unable to modify table.
The conversion of a char data type to a datetime data type resulted in an out-of-range datetime value.
The statement has been terminated.
Jay
System.Data.SqlClient.SqlException: Error Converting Data Type Numeric To Decimal.
Aug 31, 2004Hi There,
I'm using C# to get a value for a DOUBLE precision variable, called "Length", from a textBox using the following line:
Length = Convert.ToDouble( txtLength.Text )
I'm also using the following lines to prepare my stored procedure call:
arParms[9] = new SqlParameter("@Length", SqlDbType.Decimal, 5);
arParms[9].Value = record.Length;
My stored procedure has the following parameter definition:
@Length decimal(9,3)
My problem is that if someone types a value bigger than 999999 in the textbox he will get for sure the following error:
System.Data.SqlClient.SqlException: Error converting data type numeric to decimal.
I don't know how to either make sql or C# to truncate the value or catch the exception to automatically assign 0 to the parameter.
Please Help.
Moshe
Converting Data Type Varchar To Numeric
Feb 2, 2013when i execute my store procedure it give this error.
USE [CWMNEW]
GO
DECLARE@return_value int
EXEC@return_value = [dbo].[BOQ]
SELECT'Return Value' = @return_value
GO
[code]....
Check Numeric Data Type In SSIS
Sep 3, 2007Dear All,
the situation is that i have a column data comes from flat file and all i want to do is to check that the incoming column is numeric(12,3) and if the incoming data exceed that size "12,3" exception or redirect the row is happened.
the problem that i try to apply that with the data conversion or Derived column component but it in case of the scale of the incoming data exceed 3 the component trim until 3 scale.
i also try to perform it with the flat file data source component but i face a problem that if the data in the column is empty then flat file data source component read the numeric column as Zero
i hope someone help me coz i need to handle it soon.
best wishes
Maylo
Wants To Increase Digits Of Numeric Data Type.
Sep 20, 2007
Hi! Every one,
I need to increase my numeric digit in a table.previous column name was "Amount",Precision=18 and scale=6, when I increase Precision=28 it show "Airthmatec Error",
even when increase precision in a new table it work properly.
Thanks.
Booleon And Numeric Data Type In SQL Server 2000
May 11, 2005Hi all,
I wanna know about, r Sql Server 2000 support the Booleon data type, if yes plz tell how can it use...
and also tell about some common Data type.
Thanx in advance
Sajjad
Error Converting Data Type Varchar To Numeric
Dec 10, 2014I have a sql code that I am having some difficulty with. All I'm trying to do is get each department and sum the amount by month based on the date in the table. I am getting "error converting data type varchar to numeric".
Code:
select DEPARTMENT,
CASE
WHEN ((DATE >= '06/01/2014') AND (DATE <= '06/30/2014')) THEN (cast(sum(Amount) as decimal(10,2)))
ELSE '' END AS 'JUNE',
CASE
WHEN ((DATE >= '07/01/2014') AND (DATE <= '07/30/2014')) THEN (cast(sum(Amount) as decimal(10,2)))
ELSE '' END AS 'JULY'
from L27_PHAROS_DETAIL_DATA
WHERE Department = 'TECHNOLOGY SERVICES'
GROUP BY DEPARTMENT, DATE
ORDER BY DEPARTMENT
Error Converting Data Type Varchar To Numeric
Jun 13, 2008Hi Group:
I try to JOin to tables: Enterprise has a decimal(5,3) and COHIER has varchar 5. All I am getting is an error on converting data. How can I fix this problem.
SELECT a.Security_Value, b.Enterprise_Number, b.Enterprise_Description
FROM dbo.COHIER a INNER JOIN
dbo.Enterprise b ON a.Security_Value = b.Enterprise_Number
Thanks!!!!!!
Error Converting Data Type Nvarchar To Numeric
Dec 12, 2014I am using MS SQL Server 2008R2 along with VB 2010.The first question is: why is it even trying to convert anything to numeric? I have NO numeric data types. And I don't have any nvarchar data types either. I'm very confused.Doesn't nchar include any and all characters, in any combination? Should I change everything to text data type? Maybe something else? Some values are going to be blank. The Lab/Source Lots have numbers, letters and dashes.
My stored procedure:
ALTER PROCEDURE dbo.MChemsInsert
(
@LabLot nchar(10),
@Chem nchar(50),
@Source nchar(50),
@SourceLot nchar(10),
[code]....
Error Converting Data Type Varchar To Numeric.
Feb 14, 2007Select SchoolNumber + ' ' + ShortSchoolName as SchoolList from tblSchoolsSubset
This is my simple sql statement which generates the error in the subject line.
SchoolNumber is type numeric and ShortSchoolName is nvarchar
There are only numbers in SchoolNumber.
Error Converting Data Type Varchar To Numeric
Feb 26, 2007Yes again a topic like this, I couldn't get an answer for my problem so I started a new topic.
Im getting this error for these lines:
$registreer = "INSERT INTO Gebruikerstelefoon (gebruikersnaam, telefoonnummer, volgnr) VALUES ('".$_SESSION['gebruikersnaam']."', '".$_POST["telefoonnummer"]."', '')";
mssql_query($registreer) or die("Fout bij toewijzen telefoonnummer.");
'telefoonnummer' (phonenumber) is nummeric, users can insert their phonenumber in a input field (text) and register along.. ( this is a second query for the column phonennumber) though this doesn't work..