ETL Packages are getting failed sometimes(Package Execution Error). Eventhough executing ETL Package again from start, getting the same Error. But after Restarting Sql Service in BI Server, it is working fine. Whether it is the issue from Developer Code side or from server side.
View 7 RepliesHi All,
I'm facing a strange problem..
I've developed few reports. they are working fine in develop environment. after successfull testing they were published on web.
in web version, all reports are executing for first time.. if I change any of parameters values or without chaning also..
if I press "View Report" following error occurs..
An error has occurred during report processing. (rsProcessingAborted)
Query execution failed for data set 'dsMLGDB2Odbc'. (rsErrorExecutingCommand)
For more information about this error navigate to the report server on the local server machine, or enable remote errors
please suggest any alternative ways to overcome this issue
thanks in adv.
My package is connecting to an external data provider using an OLEDB driver . The package runs fine in debug mode.When i tried to run the same from SQL server agent it failed to aquire the connection. The OLEDB provider does not contain too much of information , ( connection string, initial catalog, blank user name and password).The same package executes successfully if i run using dtexec in BAT file.But if i use the dtexec in sql server job step as operating system command and try to run, the job will fail reporting " can not aquire the connection".
View 2 Replies View Related
I've got an SSRS report that is set up using a data-driven subscription to supply input parameters to the stored procedure that is called to generate the report results.
I was wondering if there is any way to specify the execution processing method (running the reports in parallel or serially). The subscription that we have set up appears to be running all of the reports in parallel which is causing massive load on our servers.
Thanks.
Hello!
I'm trying to execute DTS package using dtsrun utility from MSDOS Prompt
and getting error message "Cannot Open user default database '<ID>'.Using master database instead".
here's the syntax
dtsrun -Stestserver -Utestuser -Ptestuser -Ncustomers
How can I resolve this?
Thank you
Lena
We have a package that loads the data from several excel files into database in a forloop.
Everything works files until the package hits the bad file.
My goal is to continue the loop to process the rest of the files by skipping the bad file and error. In each task OnError I am creating custom error message to send an error/ sucess summary email out at end of the process.
How can force the for loop to continue when there is an error?
Is there any way to reset the errors?
Thanks
R
While executing the SSIS package from visial studio it is running. If we execute from Integration services - - -> stored packages - - - -> msdb - - - -package name, the package gets executed.
But when scheduled through jobs it gives the following error in history
"Execution as user. <user name > The command line parameters are invalid. the step failed"
command line looks like this "
/DTS "MSDBMaintenance PlansPackage1-HYUNDAI" /SERVER tvmwindev02 /CONNECTION "10.10.1.52.upsframis";"Data Source=10.10.1.52;Initial Catalog=upsframis;Provider=SQLOLEDB.1;Integrated Security=SSPI;Auto Translate=False;" /CONNECTION DestinationConnectionOLEDB;"Data Source=mscoe.db.ustri.com;Initial Catalog=HISNA_POC;Provider=SQLOLEDB;Integrated Security=SSPI;Auto Translate=false;" /CONNECTION "sample.db2test";"Data Source=sample;User ID=db2test;Provider=IBMDADB2.1;Location=10.10.1.55;" /CONNECTION SourceConnectionOLEDB;"Data Source=SAMPLE;User ID=db2test;Provider=IBMDADB2.1;Persist Security Info=True;Location=10.10.1.55;Extended Properties="""";" /MAXCONCURRENT " -1 " /CHECKPOINTING OFF
"
What could be the reason ?
Deleep.P
Hello,
I have two packages which is having parent child relationship.
Package1 is calling Package2, Package2 will download the input files from remote server using COZYROC SFTP Task. then Package1 will execute.
It is working fine in BIDS and SQL Agent job in "DEV" Server. But it is not wroking when i deployed the packages and it's config files and then created a SQL Agent JOB to "QA" Server.
The Error is:
Description:
The connection type "SSH" specified for connection manager "LG-AUS" is not recognized as a valid connectionmanager type.
This error is returned when an attempt is made to create a connection manager for an unknown connect
ion type. Check the spelling in the connection type name.
End Error
Error: 2008-04-23 05:33:57.26
Code: 0xC0010018
Source:
Description:
Error loading value "<DTS:ConnectionManager xmlnsTS="www.micro
soft.com/SqlServer/Dts"><DTSroperty DTS:Name="DelayValidation">0</DTSroperty
><DTSroperty DTS:Name="ObjectName">SFTP-CMS</DTSroperty><DTSroperty DTS:Na
me="DTSID">{49D115FA-B208-4BFC-928D-7CC0964E743A}</DT" from node "DTS:Connection
Manager".
End Error
Error: 2008-04-23 05:33:57.29
Code: 0xC00220DE
Source: EPT Calling LG_Inbound
Description:
Error 0xC0010014 while loading package file "C:QATestLG-SFTPInbound.dtsx". One or more error
occurred. There should be more specific errors preceding this one that explains
the details of the errors. This message is used as a return value from functions
that encounter errors.
.
End Error
DTExec: The package execution returned DTSER_FAILURE (1).
Started: 5:33:55 AM
Finished: 5:33:57 AM
Elapsed: 1.359 seconds
Please give the solution ASAP.
Thanks
Thiru
I have a package that opens an XML file and stores the XML to a variable. Then the package executes a stored procedure passing the variable containing the XML data. This package had been working perfectly until I applied service pack 2 to SQL Server. Now when I execute the package I get an error when the stored procedure attempts to exeucte. The error is: "XML parsing: line 615, character 11, illegal xml character". The strange thing is that I can run profiler and copy out the command that is being executed and paste it into a query window and it exeuctes successfully in the query window. So does anyone know what changed with service pack two that is causing this problem and/or how to resolve it?
The position that the error message is referring to is the last character in the xml variable that the package is passing to the stored procedure. What I find strange is that it throws an error when called from the package but not when executed in the query window. Any help would be greatly appreciated. Below is a copy of the command from profiler that is throwing the error:
exec sp_executesql N'EXEC dbo.ABF_UpdateBillerList @P1, @P2',N'@P1 nvarchar(max),@P2 datetime',N'<billers>
<biller Key="8958">
<billerFieldUpdates effDate="2007-06-06">
<acdind>D</acdind>
</billerFieldUpdates>
<addresses>
<address Key="26741">
<addressFieldUpdates effDate="2007-06-06">
<acdind>D</acdind>
</addressFieldUpdates>
</address>
<address Key="26742">
<addressFieldUpdates effDate="2007-06-06">
<acdind>D</acdind>
</addressFieldUpdates>
</address>
<address Key="33073">
<addressFieldUpdates effDate="2007-06-06">
<acdind>D</acdind>
</addressFieldUpdates>
</address>
<address Key="33074">
<addressFieldUpdates effDate="2007-06-06">
<acdind>D</acdind>
</addressFieldUpdates>
</address>
</addresses>
<masks>
<mask Key="218293">
<maskFieldUpdates effDate="2007-06-06">
<acdind>D</acdind>
</maskFieldUpdates>
</mask>
<mask Key="218888">
<maskFieldUpdates effDate="2007-06-06">
<acdind>D</acdind>
</maskFieldUpdates>
</mask>
</masks>
<akas>
<aka Key="13159">
<akaFieldUpdates effDate="2007-06-06">
<acdind>D</acdind>
</akaFieldUpdates>
</aka>
<aka Key="13160">
<akaFieldUpdates effDate="2007-06-06">
<acdind>D</acdind>
</akaFieldUpdates>
</aka>
<aka Key="13161">
<akaFieldUpdates effDate="2007-06-06">
<acdind>D</acdind>
</akaFieldUpdates>
</aka>
<aka Key="16948">
<akaFieldUpdates effDate="2007-06-06">
<acdind>D</acdind>
</akaFieldUpdates>
</aka>
</akas>
<contacts>
<contact Key="26740">
<contactFieldUpdates effDate="2007-06-06">
<acdind>D</acdind>
</contactFieldUpdates>
<phones>
<phone Key="16411">
<phoneFieldUpdates effDate="2007-06-06">
<acdind>D</acdind>
</phoneFieldUpdates>
</phone>
<phone Key="16412">
<phoneFieldUpdates effDate="2007-06-06">
<acdind>D</acdind>
</phoneFieldUpdates>
</phone>
</phones>
</contact>
</contacts>
</biller>
<biller Key="5136">
<billerFieldUpdates effDate="2007-06-07">
<acdind>C</acdind>
<billerNoteCurrent>State Farm Insurance is accepting payments electronically for auto, life, fire and health premium payments. Verify the premium account number matches one of the masks AND one of the addresses listed. Send all Paper Payments to: P. O. Box 588002, North Metro, GA 30029-8002, they may be addressed to State Farm Insurance or State Farm Insurance Support Center or Insurance Support Center</billerNoteCurrent>
<billerNotePrior>State Farm Insurance is accepting payments electronically for auto, life, fire and health premium payments. Verify the premium account number matches one of the masks AND one of the addresses listed. Send all Paper Payments to: P. O. Box 588002, North Metro, GA 30028-8002, they may be addressed to State Farm Insurance or State Farm Insurance Support Center or Insurance Support Center</billerNotePrior>
</billerFieldUpdates>
</biller>
<biller Key="8820">
<masks>
<mask Key="229786">
<maskFieldUpdates effDate="2007-06-11">
<acdind>A</acdind>
<maskFormatCurrent>560100##########</maskFormatCurrent>
<maskLengthCurrent>16</maskLengthCurrent>
</maskFieldUpdates>
</mask>
<mask Key="229787">
<maskFieldUpdates effDate="2007-06-11">
<acdind>A</acdind>
<maskFormatCurrent>570105##########</maskFormatCurrent>
<maskLengthCurrent>16</maskLengthCurrent>
</maskFieldUpdates>
</mask>
<mask Key="229788">
<maskFieldUpdates effDate="2007-06-11">
<acdind>A</acdind>
<maskFormatCurrent>570106##########</maskFormatCurrent>
<maskLengthCurrent>16</maskLengthCurrent>
</maskFieldUpdates>
</mask>
<mask Key="229789">
<maskFieldUpdates effDate="2007-06-11">
<acdind>A</acdind>
<maskFormatCurrent>580100##########</maskFormatCurrent>
<maskLengthCurrent>16</maskLengthCurrent>
</maskFieldUpdates>
</mask>
</masks>
</biller>
<biller Key="9494">
<addresses>
<address Key="37164">
<addressFieldUpdates effDate="2007-06-11">
<acdind>A</acdind>
<address1Current>PO Box 1087</address1Current>
<cityCurrent>Norwich </cityCurrent>
<typeCurrent>Standard</typeCurrent>
<countryCurrent>USA</countryCurrent>
<stateCurrent>CT</stateCurrent>
<postalCodeCurrent>06360-1087</postalCodeCurrent>
</addressFieldUpdates>
</address>
</addresses>
<akas>
<aka Key="20439">
<akaFieldUpdates effDate="2007-06-11">
<acdind>A</acdind>
<nameCurrent>Norwich Dept of Public Utilities</nameCurrent>
</akaFieldUpdates>
</aka>
</akas>
</biller>
<biller Key="7572">
<masks>
<mask Key="229757">
<maskFieldUpdates effDate="2007-06-11">
<acdind>A</acdind>
<maskFormatCurrent>5########</maskFormatCurrent>
<maskLengthCurrent>9</maskLengthCurrent>
</maskFieldUpdates>
</mask>
</masks>
</biller>
<biller Key="8844">
<addresses>
<address Key="26200">
<addressFieldUpdates effDate="2007-06-11">
<acdind>C</acdind>
<postalCodeCurrent>07101-0197</postalCodeCurrent>
<postalCodePrior>07101</postalCodePrior>
</addressFieldUpdates>
</address>
<address Key="26201">
<addressFieldUpdates effDate="2007-06-11">
<acdind>C</acdind>
<postalCodeCurrent>90030-0179</postalCodeCurrent>
<postalCodePrior>90030</postalCodePrior>
</addressFieldUpdates>
</address>
<address Key="37112">
<addressFieldUpdates effDate="2007-06-11">
<acdind>A</acdind>
<address1Current>PO Box 7835</address1Current>
<cityCurrent>Edison</cityCurrent>
<typeCurrent>Standard</typeCurrent>
<countryCurrent>USA</countryCurrent>
<stateCurrent>NJ</stateCurrent>
<postalCodeCurrent>08818-7835</postalCodeCurrent>
</addressFieldUpdates>
</address>
<address Key="37113">
<addressFieldUpdates effDate="2007-06-11">
<acdind>A</acdind>
<address1Current>PO Box 54228</address1Current>
<cityCurrent>Los Angeles</cityCurrent>
<typeCurrent>Standard</typeCurrent>
<countryCurrent>USA</countryCurrent>
<stateCurrent>CA</stateCurrent>
<postalCodeCurrent>90054-0228</postalCodeCurrent>
</addressFieldUpdates>
</address>
<address Key="37114">
<addressFieldUpdates effDate="2007-06-11">
<acdind>A</acdind>
<address1Current>PO Box 11731</address1Current>
<cityCurrent>Newark</cityCurrent>
<typeCurrent>Standard</typeCurrent>
<countryCurrent>USA</countryCurrent>
<stateCurrent>NJ</stateCurrent>
<postalCodeCurrent>07101-4731</postalCodeCurrent>
</addressFieldUpdates>
</address>
</addresses>
<akas>
<aka Key="20435">
<akaFieldUpdates effDate="2007-06-11">
<acdind>A</acdind>
<nameCurrent>First Investors - SMART</nameCurrent>
</akaFieldUpdates>
</aka>
<aka Key="20436">
<akaFieldUpdates effDate="2007-06-11">
<acdind>A</acdind>
<nameCurrent>First Investors Federal - Smart</nameCurrent>
</akaFieldUpdates>
</aka>
</akas>
<contacts>
<contact Key="26199">
<contactFieldUpdates effDate="2007-06-11">
<acdind>C</acdind>
<stateCurrent />
<statePrior>NJ</statePrior>
<emailCurrent>billersupport@orcc.com</emailCurrent>
<emailPrior>billersupport@princetonecom.com</emailPrior>
<organizationCurrent>Online Resources</organizationCurrent>
<organizationPrior>Princeton eCom</organizationPrior>
</contactFieldUpdates>
<phones>
<phone Key="16180">
<phoneFieldUpdates effDate="2007-06-11">
<acdind>D</acdind>
</phoneFieldUpdates>
</phone>
<phone Key="19346">
<phoneFieldUpdates effDate="2007-06-11">
<acdind>A</acdind>
<phoneNumCurrent>609-606-3370</phoneNumCurrent>
<phoneTypeCurrent>Phone</phoneTypeCurrent>
</phoneFieldUpdates>
</phone>
</phones>
</contact>
</contacts>
</biller>
<biller Key="3956">
<masks>
<mask Key="123272">
<maskFieldUpdates effDate="2007-06-06">
<acdind>A</acdind>
<maskFormatCurrent>601921##########</maskFormatCurrent>
<maskLengthCurrent>16</maskLengthCurrent>
</maskFieldUpdates>
</mask>
<mask Key="123912">
<maskFieldUpdates effDate="2007-06-06">
<acdind>A</acdind>
<maskFormatCurrent>601918##########</maskFormatCurrent>
<maskLengthCurrent>16</maskLengthCurrent>
</maskFieldUpdates>
</mask>
<mask Key="229658">
<maskFieldUpdates effDate="2007-06-06">
<acdind>A</acdind>
<maskFormatCurrent>601916##########</maskFormatCurrent>
<maskLengthCurrent>16</maskLengthCurrent>
</maskFieldUpdates>
</mask>
<mask Key="229659">
<maskFieldUpdates effDate="2007-06-06">
<acdind>A</acdind>
<maskFormatCurrent>603464##########</maskFormatCurrent>
<maskLengthCurrent>16</maskLengthCurrent>
</maskFieldUpdates>
</mask>
</masks>
</biller>
<biller Key="8215">
<addresses>
<address Key="20880">
<addressFieldUpdates effDate="2007-06-11">
<acdind>C</acdind>
<postalCodeCurrent>19355-1114</postalCodeCurrent>
<postalCodePrior>19355</postalCodePrior>
</addressFieldUpdates>
</address>
<address Key="20885">
<addressFieldUpdates effDate="2007-06-11">
<acdind>C</acdind>
<postalCodeCurrent>19493-0001</postalCodeCurrent>
<postalCodePrior>19493</postalCodePrior>
</addressFieldUpdates>
</address>
</addresses>
<akas>
<aka Key="19477">
<akaFieldUpdates effDate="2007-06-11">
<acdind>A</acdind>
<nameCurrent>Transamerica Life Insurance Company</nameCurrent>
</akaFieldUpdates>
</aka>
<aka Key="19478">
<akaFieldUpdates effDate="2007-06-11">
<acdind>A</acdind>
<nameCurrent>TLIC</nameCurrent>
</akaFieldUpdates>
</aka>
</akas>
</biller>
<biller Key="7450">
<billerFieldUpdates effDate="2007-06-05">
<acdind>D</acdind>
</billerFieldUpdates>
<addresses>
<address Key="31492">
<addressFieldUpdates effDate="2007-06-05">
<acdind>D</acdind>
</addressFieldUpdates>
</address>
</addresses>
<contacts>
<contact Key="31491">
<contactFieldUpdates effDate="2007-06-05">
<acdind>D</acdind>
</contactFieldUpdates>
<phones>
<phone Key="17309">
<phoneFieldUpdates effDate="2007-06-05">
<acdind>D</acdind>
</phoneFieldUpdates>
</phone>
</phones>
</contact>
</contacts>
</biller>
<biller Key="8169">
<akas>
<aka Key="20419">
<akaFieldUpdates effDate="2007-06-11">
<acdind>A</acdind>
<nameCurrent>GLICO CO.</nameCurrent>
</akaFieldUpdates>
</aka>
<aka Key="20420">
<akaFieldUpdates effDate="2007-06-11">
<acdind>A</acdind>
<nameCurrent>Genworth Life Insurance Co.</nameCurrent>
</akaFieldUpdates>
</aka>
<aka Key="20421">
<akaFieldUpdates effDate="2007-06-11">
<acdind>A</acdind>
<nameCurrent>GLIC LTC</nameCurrent>
</akaFieldUpdates>
</aka>
<aka Key="20422">
<akaFieldUpdates effDate="2007-06-11">
<acdind>A</acdind>
<nameCurrent>Genworth Long Term Care</nameCurrent>
</akaFieldUpdates>
</aka>
<aka Key="20423">
<akaFieldUpdates effDate="2007-06-11">
<acdind>A</acdind>
<nameCurrent>Genworth LTC</nameCurrent>
</akaFieldUpdates>
</aka>
<aka Key="20424">
<akaFieldUpdates effDate="2007-06-11">
<acdind>A</acdind>
<nameCurrent>GLAIC Co.</nameCurrent>
</akaFieldUpdates>
</aka>
<aka Key="20425">
<akaFieldUpdates effDate="2007-06-11">
<acdind>A</acdind>
<nameCurrent>Genworth Life and Annuity Insurance Company</nameCurrent>
</akaFieldUpdates>
</aka>
<aka Key="20426">
<akaFieldUpdates effDate="2007-06-11">
<acdind>A</acdind>
<nameCurrent>Genworth Life and Annuity Insurance Co.</nameCurrent>
</akaFieldUpdates>
</aka>
<aka Key="20427">
<akaFieldUpdates effDate="2007-06-11">
<acdind>A</acdind>
<nameCurrent>GLAIC LTC</nameCurrent>
</akaFieldUpdates>
</aka>
<aka Key="20428">
<akaFieldUpdates effDate="2007-06-11">
<acdind>A</acdind>
<nameCurrent>Metlife, CO.</nameCurrent>
</akaFieldUpdates>
</aka>
<aka Key="20429">
<akaFieldUpdates effDate="2007-06-11">
<acdind>A</acdind>
<nameCurrent>Metlife Insurance Co of Connecticut</nameCurrent>
</akaFieldUpdates>
</aka>
<aka Key="20430">
<akaFieldUpdates effDate="2007-06-11">
<acdind>A</acdind>
<nameCurrent>MIC</nameCurrent>
</akaFieldUpdates>
</aka>
<aka Key="20431">
<akaFieldUpdates effDate="2007-06-11">
<acdind>A</acdind>
<nameCurrent>Metlife Ins Co of CT</nameCurrent>
</akaFieldUpdates>
</aka>
<aka Key="20432">
<akaFieldUpdates effDate="2007-06-11">
<acdind>A</acdind>
<nameCurrent>GLICNY CO.</nameCurrent>
</akaFieldUpdates>
</aka>
<aka Key="20433">
<akaFieldUpdates effDate="2007-06-11">
<acdind>A</acdind>
<nameCurrent>Genworth Life Insurance Co of New York</nameCurrent>
</akaFieldUpdates>
</aka>
<aka Key="20434">
<akaFieldUpdates effDate="2007-06-11">
<acdind>A</acdind>
<nameCurrent>GLICNY LTC</nameCurrent>
</akaFieldUpdates>
</aka>
</akas>
</biller>
<biller Key="9983">
<addresses>
<address Key="37075">
<addressFieldUpdates effDate="2007-06-07">
<acdind>A</acdind>
<address1Current>PO Box 1335</address1Current>
<cityCurrent>Buffalo</cityCurrent>
<typeCurrent>Standard</typeCurrent>
<countryCurrent>USA</countryCurrent>
<stateCurrent>NY</stateCurrent>
<postalCodeCurrent>14240-1335</postalCodeCurrent>
</addressFieldUpdates>
</address>
</addresses>
<masks>
<mask Key="229671">
<maskFieldUpdates effDate="2007-06-07">
<acdind>A</acdind>
<maskFormatCurrent>##############</maskFormatCurrent>
<maskLengthCurrent>14</maskLengthCurrent>
</maskFieldUpdates>
</mask>
<mask Key="229672">
<maskFieldUpdates effDate="2007-06-07">
<acdind>A</acdind>
<maskFormatCurrent>###############</maskFormatCurrent>
<maskLengthCurrent>15</maskLengthCurrent>
</maskFieldUpdates>
</mask>
<mask Key="229673">
<maskFieldUpdates effDate="2007-06-07">
<acdind>A</acdind>
<maskFormatCurrent>##################</maskFormatCurrent>
<maskLengthCurrent>18</maskLengthCurrent>
</maskFieldUpdates>
</mask>
<mask Key="229674">
<maskFieldUpdates effDate="2007-06-07">
<acdind>A</acdind>
<maskFormatCurrent>####-####</maskFormatCurrent>
<maskLengthCurrent>9</maskLengthCurrent>
</maskFieldUpdates>
</mask>
<mask Key="229675">
<maskFieldUpdates effDate="2007-06-07">
<acdind>A</acdind>
<maskFormatCurrent>###-####</maskFormatCurrent>
<maskLengthCurrent>8</maskLengthCurrent>
</maskFieldUpdates>
</mask>
</masks>
<akas>
<aka Key="20380">
<akaFieldUpdates effDate="2007-06-07">
<acdind>A</acdind>
<nameCurrent>Creditor Interchange</nameCurrent>
</akaFieldUpdates>
</aka>
<aka Key="20381">
<akaFieldUpdates effDate="2007-06-07">
<acdind>A</acdind>
<nameCurrent>Creditors Exchange</nameCurrent>
</akaFieldUpdates>
</aka>
</akas>
</biller>
<biller Key="1767">
<addresses>
<address Key="5189">
<addressFieldUpdates effDate="2007-06-06">
<acdind>C</acdind>
<postalCodeCurrent>50704-0780</postalCodeCurrent>
<postalCodePrior>50704-0788</postalCodePrior>
</addressFieldUpdates>
</address>
</addresses>
</biller>
<biller Key="1770">
<addresses>
<address Key="37073">
<addressFieldUpdates effDate="2007-06-07">
<acdind>A</acdind>
<address1Current>1001 Fannin St. STE 4000</address1Current>
<cityCurrent>Houston</cityCurrent>
<typeCurrent>Standard</typeCurrent>
<countryCurrent>USA</countryCurrent>
<stateCurrent>TX</stateCurrent>
<postalCodeCurrent>77002-6711</postalCodeCurrent>
</addressFieldUpdates>
</address>
</addresses>
</biller>
<biller Key="10101">
<addresses>
<address Key="36672">
<addressFieldUpdates effDate="2007-06-11">
<acdind>C</acdind>
<postalCodeCurrent>15250-7877</postalCodeCurrent>
<postalCodePrior>15250-0877</postalCodePrior>
</addressFieldUpdates>
</address>
</addresses>
</biller>
<biller Key="8957">
<billerFieldUpdates effDate="2007-06-06">
<acdind>D</acdind>
</billerFieldUpdates>
<addresses>
<address Key="26738">
<addressFieldUpdates effDate="2007-06-06">
<acdind>D</acdind>
</addressFieldUpdates>
</address>
<address Key="26739">
<addressFieldUpdates effDate="2007-06-06">
<acdind>D</acdind>
</addressFieldUpdates>
</address>
<address Key="33071">
<addressFieldUpdates effDate="2007-06-06">
<acdind>D</acdind>
</addressFieldUpdates>
</address>
<address Key="33072">
<addressFieldUpdates effDate="2007-06-06">
<acdind>D</acdind>
</addressFieldUpdates>
</address>
</addresses>
<masks>
<mask Key="218292">
<maskFieldUpdates effDate="2007-06-06">
<acdind>D</acdind>
</maskFieldUpdates>
</mask>
<mask Key="218887">
<maskFieldUpdates effDate="2007-06-06">
<acdind>D</acdind>
</maskFieldUpdates>
</mask>
</masks>
<akas>
<aka Key="13157">
<akaFieldUpdates effDate="2007-06-06">
<acdind>D</acdind>
</akaFieldUpdates>
</aka>
<aka Key="13158">
<akaFieldUpdates effDate="2007-06-06">
<acdind>D</acdind>
</akaFieldUpdates>
</aka>
<aka Key="16947">
<akaFieldUpdates effDate="2007-06-06">
<acdind>D</acdind>
</akaFieldUpdates>
</aka>
</akas>
<contacts>
<contact Key="26737">
<contactFieldUpdates effDate="2007-06-06">
<acdind>D</acdind>
</contactFieldUpdates>
<phones>
<phone Key="16409">
<phoneFieldUpdates effDate="2007-06-06">
<acdind>D</acdind>
</phoneFieldUpdates>
</phone>
<phone Key="16410">
<phoneFieldUpdates effDate="2007-06-06">
<acdind>D</acdind>
</phoneFieldUpdates>
</phone>
</phones>
</contact>
</contacts>
</biller>
</billers> ','2007-06-05 00:00:00:000'
Thanks!
gn
Hi,
when i deploy my package using the DTExecUI thru the Package Execution Utility.when we execute the package . we are getting the following error.
The Product Levelis insufficient for component "Flat File Source(1)"
the package design is
FlatFileSource ----> OlEDBDestination
what could be the solution for this?
Thanks
Jegan
We plan to process our SSAS Cube nightly after our data warehouse is loaded (SSIS package) using an SQL Agent Job.
1. What is the best option to automate the processing of our cube?
2. Can this be added to our SQL Agent Job?
3. As we will only be adding new dimensions and fact records, will be use Process Add?
4. Does the initial load require Process Full?
5. How can we configure a processing option before the automated execution?
I need help about this , What i've done so far is a data processing extension that gets its data from a WS , I use it as a datasource for a report , That report will be displayed withing an ASPX page containing a reportviewer control that displays that report , The problem is catching errors that occurs withing the data processing extension .. ,
When i debugged the extension i saw that after throwing an exception the code ends up inside the "cancel()" event inside the IDBcommand implementation...
In all examples for a data processing extension i could find online they always have a comment saying the cancel is not implemented and throw a NewUnsupportedExtension()..
What happens is i get some uninformative , non-userfriendly error from the reporting services ,
something like "an error occurred during the report processing(rssomehing)"
How should i go about handling those exception that happened inside the data processing extension?
I've tried catching the error inside the event of the reportviewercontrol - reporterror but it seems that event don't fire when those errors are generated..
Any help on how to approach this would be highly welcome
I am using Custom Data Processing Extension to call a stored procedure. Iam getting following error when creating a dataset in report designer using the extension. I wrote the code in c#.
could not update a list of fields for the query. verify that you can connect to the data source and that your query syntax is correct.(Details-Object reference not set to an instance of an object.)
Here is my code
using System;
using System.Collections.Generic;
using System.Text;
using System.IO;
using System.Data;
[Code] .....
hi ,
i am trying for a drill through report (rdlc)
ihave written the following code in drill through event of reportviewer, whenever i click on the first report iam getting the error like
An error has occurred during report processing.
A data source instance has no
t been supplied for the data source "DetailDS_get_orderdetail".
the code is
using System;
using System.Data;
using System.Data.SqlClient;
using System.Configuration;
using System.Collections;
using System.Web;
using System.Web.Security;
using System.Web.UI;
using System.Web.UI.WebControls;
using System.Web.UI.WebControls.WebParts;
using System.Web.UI.HtmlControls;
//using Microsoft.ApplicationBlocks.Data;
using Microsoft.Reporting.WebForms;
using DAC;
public partial class _Default : System.Web.UI.Page
{
protected void Page_Load(object sender, EventArgs e)
{
ReportViewer1.Visible = false;
}
protected void Button1_Click(object sender, EventArgs e)
{
DAC.clsReportsWoman obj = new clsReportsWoman();
DataSet ds = new DataSet();
ds = obj.get_order();
ReportViewer1.LocalReport.DataSources.Clear();
ReportDataSource reds = new ReportDataSource("DataSet1_get_order", ds.Tables[0]);
ReportViewer1.LocalReport.DataSources.Add(reds);
ReportViewer1.LocalReport.ReportPath = "C:/Documents and Settings/km63096/My Documents/Visual Studio 2005/WebSites/drillthrurep/Report.rdlc";
ReportViewer1.LocalReport.Refresh();
ReportViewer1.Visible = true;
}
protected void ReportViewer1_Drillthrough(object sender, DrillthroughEventArgs e)
{
DAC.clsReportsWoman obj = new clsReportsWoman();
ReportParameterInfoCollection DrillThroughValues =
e.Report.GetParameters();
foreach (ReportParameterInfo d in DrillThroughValues)
{
Label1.Text = d.Values[0].ToString().Trim();
}
LocalReport localreport = (LocalReport)e.Report;
string order_id = Label1.Text;
DataSet ds = new DataSet();
ds = obj.get_orderdetail(order_id);
ReportViewer1.LocalReport.DataSources.Clear();
ReportDataSource reds = new ReportDataSource("DetailDS_get_orderdetail", ds.Tables[0]);
ReportViewer1.LocalReport.DataSources.Add(reds);
ReportViewer1.LocalReport.ReportPath = Server.MapPath(@"Reportlevel1.rdlc");
ReportViewer1.LocalReport.Refresh();
}
}
the code in method get_orderdetail(order_id) is
public DataSet get_orderdetail(string order_id)
{
SqlCommand cmd = new SqlCommand();
DataSet ds = new DataSet();
cmd.Parameters.Add("@order_id", SqlDbType.VarChar, 50);
cmd.Parameters["@order_id"].Value = order_id;
ds = SQLHelper.ExecuteAdapter(cmd, CommandType.StoredProcedure, "dbo.get_orderdetail");
return (ds);
}pls help me.
Hello Chaps,
I am using vb.net 2005 and SQL Server 2005.. I have deployed some of my packages on the server.. Now if i am trying execute packages with SSIS object model from any of developement PC they are executing perfectly. But as soon as i am trying to execute them from client pc - where no any component except (.netframwork) -- i am getting the follwoing error:
Retrieving the COM class factory for component with CLSID {E44847F1-FD8C-4251-B5DA-B04BB22E236E}
Can any one help me out..? i have gone through some of the article stating that SQL client componet must be installed on the computer from where app runs...
Is there any other solution to use SSIS object model...
Let me know if any one you have...!
Thanks,
Tarang Pandya
I have a column in which Email data is available like
clicuanan@aspenms.com(M)
jteply@mac.com(M)
How to extract in the below format
clicuanan@aspenms.com
jteply@mac.com
tjones@jpmc.com
I am preparing for the exam anybody know of any braindump sites that have data
warehousing braindumps?
Hello,
I am new to SQL Server. I want to know about DATA WAREHOUSING AND OLAP. Please help me.
Can anyone suggest a good resource that outlines data warehouse solutions using SQL 7.0 or higher?
View 1 Replies View RelatedHi,
I need to implement/set up the Data warehouse/Data mart in one of the department in my company by using SQL server 2005. Do any body knows the steps what I need to follow?
It will be more appreciate that, if any body gives some of the links which will help me to do the implementation/development of the same.
I do have the basic idea however I may face some of the difficulties when I start such as, does the SQL server reporting service allow the end user to customize the report based on their needs etc.?, so any of them having experience in this field please reply me.
Thanks
Ajith Nair
I am working on to create a data warehouse. I have made a database which will be the data warehouse and will consist of dimension and fact tables. I know that other than dimension and fact table a data warehouse should also consist of a meta data, now my question is what should be the structure of metadata and all the information it should have?
View 2 Replies View RelatedI have a SSIS (CTP June 2005) package with several data flow tasks. One data flow has 2 OLEDB data sources which are then unioned together, followed by a conditional split, then a derived column transformation, which feeds into an OLEDB destination. When I run the package, this particular data flow seems to run fine and then just stops. There are no errors and the records counts don't move. I've used data viewers to look at the data and it seems fine. I've switched the OLEDB destination with a flat file and execution runs fine, then switched back to OLEDB and it hangs again (over and over). There's nothing unusual about the OLEDB destination, and all the other OLEDB destinations work fine. It also seems to hang on the same destination row number count, but again that row has been verified as valid. In fact, I dropped the DB table and recreated it with no constraints and all fields nullable, but the problem persists. Help?
View 6 Replies View RelatedHi,
I created a package which passes some infornmations( through parameters) to its child package.
I need to do some processing in parent package based on execution status of child package.i.e.
if child fails then some operation and if child succeeds then other operation.
To determine the status of execution of child package I am using two differnt constraint ..one constraint is having value "Success" and other having value "Failure".
My problem is that when child packge is executed successfully the constraint with value = "Success" works properly but when child fails the constraint with value "Failure" does not work.
-Prashant
Hi:
I am planning to give the microsoft 70-019 data warehousing exam. I am not able to find any good resources to prepare for the exam. Please help!
Thanks in advance
Hi
We are starting with designing a datawarehouse for my company. I have done some reading on the concepts and steps involved, but what I am seriously lacking is some examples. I'd like to read through some real examples of data warehouses that worked including the full design diagrams.
Can anyone direct me to some good sites for this?
Thanks,
TeaaZA
Hello, everone:
Anybody can offer technical information about DTS appied in data warehousing? Website, tutorial, forum and books will be great. Thanks.
ZYT
Hi,
I am running dts in Sql Server 2005 management studio from Management, Legacy and data Transformation Services.
Once the dts has run, I get this error message "Error Source : Microsoft Data Transformation Services (DTS) Package Error Description : Error accessing Windows Event Log."
Please help me
thanks in advance
Srinivas
How do you run a stored procedure on PDW via SSIS? I've tried Execute SQL Task and Execute T-SQL Task but in both cases the task will run and complete almost immediately. Task shows success, no errors, but nothing happens in PDW. PDW admin console does not even register the query. Procedures run fine manually from SQL Server Object Explorer connection.
View 3 Replies View RelatedHow to use Stored Procedures in SSIS?
View 2 Replies View RelatedHow to use temporary table in SSIS ?
View 2 Replies View RelatedIs it possible to write a SP (Automate) to generate STATISTICS on any database and then use the output to create the stats on that database.
I ran the tuning adviser and it suggested indexes with lot of STATISTICS on the dev environment. This dev environment is replicated in several other environment with data size in these environment varying. I would like to know if I can create a SP which generates STATISTICS information pertaining to specific database environment for the query in question for tuning.
I have a large fact table spread across tens of partitions (appx. 1TB each). I found that the business does not need much of the columns in the table. So, as an optimization action, I decided to get rid of these un-needed columns.What is the efficient way to achieve this? Can I simply drop these columns from the table, or use a new table with the reduced structure?
View 2 Replies View RelatedI have a Fact Table with a ID column as Primary key and clustered index is created. And also I have 4 dimensions FK's of data type INTEGER. And finally, I have one aggregation measure in the Fact Table.
Now, my situation is How can I improve the speed of querying the fact table by creating any of the below indexes?
1. XML
2. Spatial
3. Clustered
4. Non-Clustered