Data Extraction From A Source Using SOLID ODBC Driver
May 12, 2008
Hi all,
We are using a package to extract data from a source build on some image using SOLID ODBC 5.2 driver.
When we tried to extract data through MS SSIS(SQL Server Integration Services) package using SOLID 5.2 ODBC driver connection, it throws an error as mentioned below:
ERROR DESCRIPTION:
Error: 0xC02090F5 at Data Flow Task, DataReader Source [1]: The component "DataReader Source" (1) was unable to process the data.
Error: 0xC0047038 at Data Flow Task, DTS.Pipeline: SSIS Error Code DTS_E_PRIMEOUTPUTFAILED.
The PrimeOutput method on component "DataReader Source" (1) returned error code 0xC02090F5. The component returned a failure code when the pipeline engine called PrimeOutput(). The meaning of the failure code is defined by the component, but the error is fatal and the pipeline stopped executing. There may be error messages posted before this with more information about the failure.
Error: 0xC0047021 at Data Flow Task, DTS.Pipeline: SSIS Error Code DTS_E_THREADFAILED. Thread "SourceThread0" has exited with error code 0xC0047038. There may be error messages posted before this with more information on why the thread has exited.
Also, we tried the same in a Excel sheet using the SOLID 5.2 ODBC driver it is working fine.
Does the SOLID ODBC driver support .Net framework or do we need to install any other components??
trying to install sql server2005 on a windows 2003 server box.
getting msg below at the sql server . i looked at other posts on trying to uninstall SQL Native Access Client and norton antivirus. i could never find the snac on the add - remove programs and this server does not have a virus protection program yet.
here's the history of the installs on the server:
wanted to test a 2005 upgrade so:
1) installed sql server 2000 then sp4 then restored some databases to it - all OK
2) tried to upgrade to sql 2005 but ran into problems and left it at that.
had a disk drive crash on the d drive so lost the installs but not the operating system
when the drive was replaced, left alone for a while
then wanted to test a straight 2005 install
1) removed the broken 2005 attempt
2) removed the 2000
3) installed 2005 and got the error on the subject line:
TITLE: Microsoft SQL Server 2005 Setup ------------------------------
SQL Server Setup could not connect to the database service for server configuration. The error was: [Microsoft][ODBC Driver Manager] Data source name not found and no default driver specified Refer to server error logs and setup logs for more information. For details on how to view setup logs, see "How to View Setup Log Files" in SQL Server Books Online.
i've gone through as many of the forums that i can and have tried several things - like uninstalling 2005 and installing pieces and parts but but nothing seems to work.
i am attempting to run phpbb using ms sql 2005 on the same box but get the following error during the setup
Could not connect to the database, see error message below. [Microsoft][ODBC Driver Manager] Data source name not found and no default driver specified
i am not sure yet if this is an issue with sql, php or phpbb
php is installed in iis and has all the modules installed which the php msi installer supported. i can run php code but in this case when i'm running the install.php file for the phphbb setup, i fill in the values for the database and got that error
phpbb detects all the required server settings and sees that i have ms sql installed
any suggestions on what that error means or how to go about configuring odbc driver?
probably a simple issue. but i'm still new with sql stuff
In order to add a data source by using ODBC Administrator, programmatically i am using SQLConfigDataSource. Thus calling SQLConfigDataSource with the fOption set to either ODBC_ADD_DSN for creating a new DSN.
Following is the stattement specified in the source code. where type_of_driver = "Microsoft Access Driver (*.mdb)"; and parameters contains the data source source credentials information such as DSN, UID, PSW, FIL, Description, DataDirectory,DEFAULTDIR and DBQ all separated by " ".
after execution of below mentioned command an error is encountered i.e -1 is returned if the DataDirectory path exceeds certain nested directories link. for eg. the file path specified below.
C:My DocumentsClients CurrentAHW Netcare BenefitsDeliverables1-5 Results Chain - system LevelAlberta NetcareBenefits Logic System Level V01.rcm
Creating a datasource with the file name i.e Benefits Logic System Level V01 every time. rc = :: SQLConnect(hDbc, (unsigned char *)szSource, SQL_NTS, (unsigned char *)szUserName, SQL_NTS, (unsigned char *)szPassword, SQL_NTS);
Also following error message was encountered during execution of SQLConnect command.
/*szErrorMsg = 0x0012e834 "[Microsoft][ODBC Microsoft Access Driver]General error Not enough information to connect to this DSN with SQLConnect. Use SQLDriverConnect."*/
Thus followed the instruction smentioned in the error message an dtried using SQL DriverConnect() in the following manner. rc = :: SQLDriverConnect(hDbc, NULL,(SQLCHAR *)"DSN=RCM",SQL_NTS,outstr, sizeof(outstr), &outstrlen,SQL_DRIVER_NOPROMPT);
Still an error is encountered but this time it returns a RETCODE of 100 whrease earlier it had returned -1.
Inform the procedure to be followed using SQLConnect when DataDirectory path is too long.
Could you please help me to find easiest way to schedule daily auto data extraction time in SQL Server Express 2005 Edition (I need to put time to load data every day).
I am trying to use a DTS package to extract data from an old Pervasive SQL 2000 (Btrieve) data source, and copy into an MS SQL Server table.
I have installed the Pervasive ODBC driver and got linked tables in Access working. I can see the data.
When I create the DTS package, it shows a list of the tables in the drop-down, but when I hit the Preview button I get an unspecified error. I can finish setting up the DTS package, the new MS SQL Sever table gets created, and the field transformations all look correct. However, when I execute the package it fails. In the logs, I get an unspecified error, the only error code I get in log is: 80074005.
Please help share with me if you know the version compatibility matrix of Ms SQL Server, ODBC driver (sqlsrv32.dll), Driver Manager (odbc32.dll) and ODBC API spec. For instance, how can I know Ms SQL Server 2000 can work with which version of sqlsrv32.dll, a particular version of sqlsrv32.dll can work with which version of odbc32.dll and a certain version of sqlsrv32.dll/odbc32.dll conforms to which version of ODBC API spec (e.g. 3.5).
I have set up a new connection as a connection from data source, but I cannot see how to use this connection to create my Data Flow Source. I have tried using an OLE DB connection, but this is painfully slow! The process of loading 10,000 rows takes 14 - 15 minutes. The same process in Access using SQL on a linked table via DSN takes 45 seconds.
Have I missed something in my set up of the OLE DB source / connection? Will a DSN source be faster?
hi all,I am trying to create a dts package to transfer data from tables in mysql server 2000 database to a db2 UDB v8.1.4 database. When I use ibmdb2 oledb driver for the destination this works fine except that rowsare committed on a row by row basis thus performance is slow. I wantto use the odbc driver but when I define it as the destination, i geterrors saying that the maximum number of rows failed has exceeded theminimum.Does anybody know what to do in order to get the transfer workingusing ibm db2 odbc as the datasource?ThanksLyn
Hi, in SSIS I read data from a DB2 database on AS400 using the Client Access ODBC Driver for DB2 from IBM and write it to a SQL Server database. Since it does not work using the odbc driver as data source directly, I use a data reader component with .net providersodbc. Some special characters were not translated correctly when read from DB2. They show up as ? in the SQL Server target table.
I tried to change the client locale in the ODBC connection properties but it did not help me. I tried changing all other settings in odbc but it still does not work.
In dts I could source all the data without this problems and good speed using the same nodbc driver.
The OLEDB Providers delivered with SSIS do not work in SSIS or I am too stupid to configure them correctly. They are even too slow as I explained above.
I cannot use the MS OLEDB Provider for DB2, because it works only in Enterprize Edition and we only have the Standard Edition.
Thus, only using Client Access ODBC Driver for DB2 with net providersodbc (as bridge) is performant enough and works on Itanium. But how to work around the problem with the special characters?
On localhost this application works fine but when I put on remote server. I am getting following errors. For both localhost and server, I am using same remote sql 2000. I will appreciate any help.
Thanks,
Arif
Server Error in '/' Application. --------------------------------------------------------------------------------
ERROR [42000] [Microsoft][ODBC SQL Server Driver][SQL Server]Line 1: Incorrect syntax near ')'. Description: An unhandled exception occurred during the execution of the current web request. Please review the stack trace for more information about the error and where it originated in the code.
Exception Details: Microsoft.Data.Odbc.OdbcException: ERROR [42000] [Microsoft][ODBC SQL Server Driver][SQL Server]Line 1: Incorrect syntax near ')'.
Source Error:
An unhandled exception was generated during the execution of the current web request. Information regarding the origin and location of the exception can be identified using the exception stack trace below.
I am getting the error message as "DIAG [00000] [ODBC Access Driver 52.1.150.0] -26 Driver not capable (-26)" at the time of retrieving the catalog infromation by SqlTables methode. it is shown "?" as catalogname but this not supported by odbc access driver. can you please help out how can i resolve using C++ code in SqlTables methode.
I am using SSIS 2014 with the below .net framework version and installed in Windows server 2012 R2 . I have installed my client's odbc drivers (both 32 bit and 64 bit) in my production server and created ODBC system DSNs for 32 bit and 64 bit.
When i open SSIS 2014 and tried to create the odbc connection but i can able to see only the 32 bit system DSN connection ,i can't able to see my 64 bit odbc system dsn connection.
Microsoft Visual Studio 2012 Shell (Integrated) Version 11.0.50727.1 RTMREL Microsoft .NET Framework Version 4.5.51650
SQL Server Integration Services   Microsoft SQL Server Integration Services Designer Version 12.0.1524.0
And i installed my client odbc drivers(32,64 bit) and created ODBC system DSNs in my local system and when i open ssis 2014 and i can able to see both the ODBC system DSNS(32,64) connections from SSIS ODBC connection.
I am using below version of .net framework in my local system which was installed in windows 7 and i have SSIS 2012 also installed in my system and i can able to see both ODBC connections using 2012 as well in my local system.
Microsoft Visual Studio 2012 Shell (Integrated) Version 11.0.50727.1 RTMREL Microsoft .NET Framework Version 4.5.50938
SQL Server Integration Services   Microsoft SQL Server Integration Services Designer Version 12.0.1524.0
why i can not see the ODBC 64 bit system DSN connection from SSIS in my production server ?
I am using VB.NET 2005 and set up an ODBC connection via ODBC.ODBCConnection to a MDB database. Therefor, I use the "Microsoft Access ODBC Driver (*.mdb)".
When I set up a ODBCCommand like "ALTER DATABASE..." or "CREATE TABLE..." and issue it with the com.ExecuteNonQuery() command, I get an error from ODBC driver, that a SQL statement has to begin with SELECT, INSERT, UPDATE or DELETE.
How can I use DDL statements via ODBC?
I would appreciate if you could help me to use ODBC for that - no OLE, no ADO.
I am new to SQL Server. I have some basic questions.
I have installed SQL Server Developer Edition on a Windows XP Media center edition. The installation is successful. Now I am trying to create an ODBC, but I there are some options which I am not quite sure about.
e.g.
1. How SQL Server verify the authenticity of the login ID? A. Windows NT.... B. SQL Server....
Client Configuration: Server alias: ??? Named Pipes: What should be the values of [pipe name]?
or should i choose other options?....
And I when I use Query Analyzer to connect to Server, the authentication fails..
Can some one point me to the right direction, or if there's some documentation on this subject, that would be very much appreciated.
I'm trying to import tables from COBOL thru Relativity client. With SQL Server 2000, I used Other (ODBC Data Source) to do this. I cannot find a comparible data source in SQL Server 2005. What do I do?
I am new to SSIS packages and want to use an ODBC data source connected to an old Btrieve set of data files. I set up the ODBC DSN, and my SQL Server Data Connection, and can browse the tables in the Server Explorer. However with regards to my SSIS package, I'm not sure whether to use an OLE DB Source or Data Reader Source. I have futzed with both of them but haven't had any luck at seeing the tables. Can someone please give me some tips.
A data reader is using a connection manager to connect to an ODBC System DSN . A query in the SqlCommand property is provided. Data is being truncated in the only string column . The data type in data reader output-->external columns shows as Unicode string [DT_WSTR] Length 7.
The truncated output in a text file is the first 3 characters from left to right . Changing the column order has no effect.
A linked server was created in SQL Server Management Studio to test the ODBC System DSN using the following:
Data returned using "OPENQUERY" does not truncate the string column indicating that the ODBC Driver returns data as expected with sql 2005, but not with the Data Reader.
I'm trying to create an ODBC Data Source on both an NT 4.0 server and 2000 Professional workstation that are remote. I can not seem to get them to connect. What do I put in the server name field when creating the network library connection? I have tried both the ip address and fully qualified domain name of the sql server and neither worked.
As other contributors, all I am trying to do is import data from an ODBC source (spelled 'non-Microsoft data source') into a SQL 2005 table. I can easily do this in SQL 2000 with DTS, but when I use the same DSN in VS 2005 it doesn't work.
I created an integration project, and made a connection in Connection Manager to the DSN and clicked Test Connection. It succeeded, or so it claimed.
Click OK and drag a DataReader Source onto the Data Flow surface Doubleclick it and select the connection manager per above. Note the error: Error at Data Flow Task [DataReader Source[50]]: Cannot acquire a managed connection from the run-time connection manager.
What does that mean? More to the point, how to fix it?
My replication of those SQL 2000 servers gave errors: Data source (11): General Network Error. Check your network documentation... and ODBC (08S01): Communication link failure. The replication was across the WAN. I don't know where to start to troubleshoot this problem. Please help!
ERROR [IM002] [Microsoft][ODBC Driver Manager] Data source name not found and no default driver specified Description: An unhandled exception occurred during the execution of the current web request. Please review the stack trace for more information about the error and where it originated in the code. Exception Details: System.Data.Odbc.OdbcException: ERROR [IM002] [Microsoft][ODBC Driver Manager] Data source name not found and no default driver specifiedSource Error: An unhandled exception was generated during the execution of the current web request. Information regarding the origin and location of the exception can be identified using the exception stack trace below. Stack Trace: [OdbcException (0x80131937): ERROR [IM002] [Microsoft][ODBC Driver Manager] Data source name not found and no default driver specified] System.Data.Odbc.OdbcConnection.HandleError(OdbcHandle hrHandle, RetCode retcode) +35 System.Data.Odbc.OdbcConnectionHandle..ctor(OdbcConnection connection, OdbcConnectionString constr, OdbcEnvironmentHandle environmentHandle) +131 System.Data.Odbc.OdbcConnectionFactory.CreateConnection(DbConnectionOptions options, Object poolGroupProviderInfo, DbConnectionPool pool, DbConnection owningObject) +98 System.Data.ProviderBase.DbConnectionFactory.CreateNonPooledConnection(DbConnection owningConnection, DbConnectionPoolGroup poolGroup) +27 System.Data.ProviderBase.DbConnectionFactory.GetConnection(DbConnection owningConnection) +47 System.Data.ProviderBase.DbConnectionClosed.OpenConnection(DbConnection outerConnection, DbConnectionFactory connectionFactory) +105 System.Data.Odbc.OdbcConnection.Open() +37 DBConnection.open() +12 ASP.global_asax.Session_Start(Object sender, EventArgs e) +35 System.Web.SessionState.SessionStateModule.RaiseOnStart(EventArgs e) +2163182 System.Web.SessionState.SessionStateModule.CompleteAcquireState() +154 System.Web.SessionState.SessionStateModule.BeginAcquireState(Object source, EventArgs e, AsyncCallback cb, Object extraData) +542 System.Web.AsyncEventExecutionStep.System.Web.HttpApplication.IExecutionStep.Execute() +90 System.Web.HttpApplication.ExecuteStep(IExecutionStep step, Boolean& completedSynchronously) +155 Version Information: Microsoft .NET Framework Version:2.0.50727.42; ASP.NET Version:2.0.50727.42 ODBC version 3.526.1830.0strconn = "DSN=testserver;uid=tester;pwd=tester;DATABASE=Test_Database"I've Test_Database on 2 machines (same data in both machines), one is in SQL 2005 server and another one is in SQL 2000 server.When the website was published, it can't work. (with both database). But it work in debug mode in Visual Studio2005.The website can't work when use ODBC connection but it work when use SqlClient.Help me solve this problem please. T_T Thanks in advance,
I am running Microsoft SQL Server 2005 Express Edition, and I am having difficulties setting up an ODBC User Data Source to connect to the SQL server. I have tried going through "Control Panel -> Administrative Tools -> Data Sources (ODBC)" to add a user data source. For the SQL Server to connect to, I have tried specifying "localhostSQLEXPRESS", "SQLEXPRESS", "(local)", etc. -- but nothing seems to work. When the DSN configuration wizard tries to connect to the SQL Server to obtain default settings, it fails with the error "SQL Server does not exist or access denied". (Same error occurs if I try connecting to this ODBC data source later.) But I know that the SQL Server exists and I have been using it through the SQL Server data provider in another application. I am new to this, so any help or pointers would be greatly appreciated. Thanks, Kumar
I have been using ODBC data source administrator for years without any problem. However, after a unsuccesful MSSQL7.0 installation, i keep getting the following message:
"An error occurred while windows was working with the control panel file
D:WINNTSystem32Odbccp32.cpl"
Any insight into this would be greatly appreciated.
We have more than 10 databases on the same server. When I try to set up ODBC connection through my desktop to a specific database (DB1) using SQL authentication, it acts weird:
-- I give the login (testkz) access to DB1, DB1 does not show up in the default database list; I tried to type in the database name, it is not taken
-- If I give 'testkz' access to two other databases (and only these two), even though I did not give access to DB1, DB1 together with some other databases show up on the default database list. Seems to me that there are some dependency among the dbs.
I am trying to setup an ODBC data source for Access. The server I'm trying to connect to is 2008 R2. I have SQL Server Management Studio installed on the computer where I'm trying to make the ODBC Data Source from. I can connect the the remote 2008 server through Management Studio, but in the ODBC wizard I do the following:
"Machine Data Source" tab, click "New" Select "User Data Source", click "Next >" Select "SQL Server", click "Next >" Click "Finish" Name: remote Description: remote Server: type the server name ie "sql.somewhere.com"
