I'm just testing an SSIS package and am having issues with dealing with locked records.
my situation is as follows:
my source table is oracle, my destination table is in SQL server. my data flow is a very simple update with a lookup transformation and then two OLEDB commands for update and insert.
On each of the OLEDB commands I have set the "command timeout" to 5 seconds (just for testing purposes). also each OLE DB command has a failure path that outputs to a flat file. I'm expecting that if the destination table/records is/are locked then after 5 seconds the record will be output to the flat file.
so to test this I begin a transaction on the destination table and don't commit it. then I start the SSIS job. it doesn't appear to even get to the OLE DB commands. it appears to stop at the beginning of the data flow task. the output window shows this:
"Information: 0x40043007 at Import from Phoenix, DTS.Pipeline: Pre-Execute phase is beginning."
but it just hangs there indefinately. the progress tab tells me that it get's from the validating stage and past the prepare for execute stage but hangs on pre-execute - 0 percent.
I've put the command timeout = 5 on everything that I can find. I've mucked arround with all the possible "validateExternalMetadata" properties even though I only guessed that it may be the cause. is there anything that I'm missing? where should I look next?
(yes it does work perfectly when there is no transaction locking the target table)
I have a situation where we periodically maintain an updated version of some data. I select the fresh data and match it on an alternate key to the existing data, determine if its a new record or changed record, perform some transformations, and then end with either adding (OLEDB Dest) or updating (OLEDB Command) the table. It's basically like using a SlowlyChangingDimension but much faster. Anyway, on one of the more complicated tables the data flow is getting locked up between the initial source select and the destination (because the table is referenced in both). I've fiddled with the isolation levels and transactions and destination table lock but nothing will prevent the lockup.
Is there 1) a better way to structure a data flow when you are pulling data from a table you will ultimately be using as a destination to prevent this lockup (without using the SCD) or 2) something that can be done to prevent the data flow lockup??
I am trying to use a CTE in an OLE DB Command data flow transformation object. However, when I enter the cte and corresponding query in the SqlCommand field of the OLE DB command editor dialog, I get a syntax error. Can CTE's be used data flow objects? I have been able to use them in an Execute SQL Control Flow Item, but not in any data flow item.
I'm probably not looking in the right place, but all I could find when creating a data flow task was OLE DB Commands. I was trying to utilize a dataaccesslayer piece of code that we use every where in our projects, but because it uses ADO and not OLE DB, it caused an issue between the column data types.
Is there an ADO command object available? Or are we forced to use the OLE DB command object? All I was looking to do was to Execute a SQL command. There's an object on the Control Flow level to do that, but not on the Data Flow level---not sure why that is.
I developed a custom data flow task in .net 2.0 using Visual Studio 2005. I installed it into GAC using GACUTIL and also copied it into the pipeline directory. This task runs absolutely fine when I run it on my local machine both in BIDS and using the script in windows 2000 environment. However, when I deployed this package into a windows 2003 server, the package fails at the custom task level. I checked the GAC in windowsassembly directory and it is present. Also I copied the file into the PipeLine directory and verified that I copied it into the correct pipeline directory by checking the registry. The version of the assembly is still Debug. I looked up documentation in MSDN but there is very little information about the errors I am seeing.
The error I get is pasted below, Can somebody please help me as I am currently stuck and running out of ideas to fix this problem.
Code: 0xC0047067
Source: DFT Raw File DFT Raw File (DTS.Pipeline)
Description: The "component "_" (2546)" failed to cache the component metadata object and returned error code 0x80131600.
Code: 0xC004706C
Source: DFT Raw File DFT Raw File (DTS.Pipeline)
Description: Component "component "_" (2546)" could not be created and returned error code 0xC0047067. Make sure that the component is registered correctly.
In my SSIS Data Flow Task, I have a query that retrieves data based on a couple of date parameters. Is there a way we can pass/use the Variables defined in the SSIS package in the query ?
(I am assigning values to those variables from C# code)
The query should look like this:
select ordernumber, customerid from salesorder
where statecode=3 and datefulfilled between @variable1 and @variable2
Multi user ASP.Net website, SQL Server backend.When using transactions to insert multiple rows into a table and then commiting them once you're happy that everything looks good, the table(s) gets locked before commiting.Basically, I want to perform updates and inserts under a transaction but still allow other users to carry on using the site and potentially the tables that are being used with the transaction.
Question:Â Is there a way to stop the table lock occurring and for SQL to just do a record lock?, thus avoiding blocking other users?I know that a possibility is to use Snapshot replication, but am a little worried about turning it on due to the small team we have for testing.
Hi, all experts here, Do we always have to use SCD component for the loading of data into data warehouse to handle changes of rows? I am looking forward to hearing from you and thank you very much in advance for your help. With best regards,
declare @error int, @rowcount int select @rowcount = COUNT(1) FROM STG_BCDR; while @rowcount > 0 begin  BEGIN TRAN Deletion
[code]....
Above code i try to delete records batch by batch to avoid table locking at BCDR table.total records in this BCDRÂ table is 40,000 records. Â However I run the code at execution plan, the BCDR table still clustered index scan which means that the locking still happend.
If i change the delete top (5000)...... to delete top (5).... then thre is clustered index seek, which is good..The problem here is  each time  only delete top 5 records which is means it will realy take very long time to remove those data.
how to cater the situation inorder for me to delete those huge data without table locking happend. If table locking happend , then other user will not be able to access this table at the same time.
I have a series of data flow tasks that I want to output to a temp table. I've set the data source for RetainSameConnection and the Data Flows are DelayValidation. The OLE DB data source inside the Data Flow works fine, but the data destinations don't offer a # or ## as a target. I've tried every destination that sounds logical, without success.
I could use some help on how to save the result of my data-flow in an existing table.
I have created a data flow. I have no trouble storing the result of the flow in a new table. But I'm trying to store the result of my data flow in an existing table. (The flow involves fuzzy grouping, and i would like to store the result in the original table on which the fuzzy grouping was performed). But I cannot get it to work.
I can select the existing table as OLE DB destination. I can write an SQL to manipulate this table, but how do i address the result of the flow in the SQL?
I have a dataset that was created via a source + lookups + derived columns.
I wish to take this dataset and treat is as a table within a sql statement so that I can update a permanent table with the a specific value within the temp dataset.
In sql this is what I am trying to do:
SELECT COUNT(*) AS Count_of_Employees, DEPT FROM Employees GROUP BY DEPT
UPDATE Departments SET Number_of_Employees = Count_of_Employees WHERE Dept = dept.
I guess this should be rather simple to answer but i just don't get how to do this. I just want to import some data from an Access mdb file into a SQL Server 2005 Database.
As I dont want to create all tables in Sql Server 2005 beforehand i'd like to create them out of my SSIS Package. Therefore i use the 'Execute SQL Task' in the control flow before stepping into the dataflow where only a oledb-source and an oledb-destination exist...
VERY simple... My problem is, that i can't select the table from the selectionlist in the oledb-destination because it does not exist before executing the package...
If i create the table by hand just to be able to select it, that does not help. because if everything is set up and then i delete the table (because it will be created by the package anyway) an error occurs before executing the package - in the validation phase:
Package Validation Error: "Invalid object name 'myToBeCreatedTable'".
Can't i create tables on the fly which i use then in my dataflow tasks?
Kind regards,
Wolfgang
Hello dear Forum,
I guess this should be rather simple to answer but i just don't get how to do this. I just want to import some data from an Access mdb file into a SQL Server 2005 Database.
As I dont want to create all tables in Sql Server 2005 beforehand i'd like to create them out of my SSIS Package. Therefore i use the 'Execute SQL Task' in the control flow before stepping into the dataflow where only a oledb-source and an oledb-destination exist...
VERY simple... My problem is, that i can't select the table from the selectionlist in the oledb-destination because it does not exist before executing the package...
If i create the table by hand just to be able to select it, that does not help. because if everything is set up and then i delete the table (because it will be created by the package anyway) an error occurs before executing the package - in the validation phase:
Package Validation Error: "Invalid object name 'myToBeCreatedTable'".
Can't i create tables on the fly which i use then in my dataflow tasks?
I guess this should be rather simple to answer but i just don't get how to do this. I just want to import some data from an Access mdb file into a SQL Server 2005 Database.
As I dont want to create all tables in Sql Server 2005 beforehand i'd like to create them out of my SSIS Package. Therefore i use the 'Execute SQL Task' in the control flow before stepping into the dataflow where only a oledb-source and an oledb-destination exist...
VERY simple... My problem is, that i can't select the table from the selectionlist in the oledb-destination because it does not exist before executing the package...
If i create the table by hand just to be able to select it, that does not help. because if everything is set up and then i delete the table (because it will be created by the package anyway) an error occurs before executing the package - in the validation phase:
Package Validation Error: "Invalid object name 'myToBeCreatedTable'".
Can't i create tables on the fly which i use then in my dataflow tasks?
I need to pass a parameter from control flow to data flow. The data flow will use this parameter to get data from a Oracle source.
I have an Execute SQL task in control flow to assign value to the Parameter, next step is a data flow which will need take a parameter in the SQL statement to query the Oracle source,
The SQL Looks like this:
select * from ccst_acctsys_account
where to_char(LAST_MODIFIED_DATE, 'YYYYMMDD') >?
THe problem is the OLE DB source Edit doesn€™t have anything for mapping parameter.
-------   -----         ----         ---- Name    Add          No        RowID -------    -----                ----        -------
aa    #a-1,India                             10 bb    #a-1,India                     11                aa    #a-1,India                             12
 table 1 inserting to Table 2 (Using 1st Data flow)
Table 2:
-------   -----         ---- Name    Add         ID(Note:Here Identity1,1) -------    -----                ---- aa    #a-1,India                1 bb    #a-1,India                2 aa    #a-1,India                3
My Requirement is Update Table 1 set Column::No=Table 2.ID                                                                        based on Exact Match of                                                                         Table1.Name=Table2.Name and                                                                         Table1.Add=Table2.Add
It means Get back the Id for Source Table 1
 2nd Data flow        Source(Table1:Name, Add,No)                    |
  --LOOKUP(Table2:Name, Add::Matched Look Columns Name, Add and Tick Mark on ID)                         |(Match)
  -->OLEDB Command: update Table1 set N0=? where RowID=?(Here Param_0= NO ,Param_1=RowID)
Here My Issue is if Table 1 had Duplicates(same Name, Add, but Row Id is different it is Updating Same ID for Table 1.No It means Get Back ID correctly not updating Result::
Table 1:
-------   -----         ----         ---- Name    Add          No        RowID -------    -----                ----        ------- aa    #a-1,India               1             10 bb    #a-1,India              2       11                aa    #a-1,India              1 12
I have SSIS which will have OLF DB Source, and then have Derived Column component to managering all data from OLF DB Source. I used to have default columns such as Create Date, Update Date set as fixed date. Now we decided to put this default column values into a table to manage. I then have problem to choose which component I should use in order to have this columns selected from default table.
For example: if Create Date is null, I have to select default value from the default table; otherwise, use Create Date value and so on.
I have a data transform from a flat-file to a SQL server database. Some of the flat-file fields have NULL values. The SQL table I'm importing into does not allow NULL values in any field, but each field has a Default value specified.
I need to have it so that if a null value comes across in a field using the data transform, it takes the table default on import. I could of sworn I had this working a few days ago, but I get errors now that state I'm violating table constraints. Has anyone done this before?
I have an Execute SQL Task that returns a Full Rowset from a SQL Server table and assigns it to a variable objRecs. I connect that to a foreach container with an ADO enumerator using objRecs variable and Rows in first table mode. I defined variables and mapped them to the columns.
I tested this by placing a Script task inside the foreach container and displaying the variables in a messagebox.
Now, for each row, I want to write a record to an MS Access table and then update a column back in the original SQL Server table where I retreived data in the Execute SQL task (i have the primary key). If I drop a Data Flow Task inside my foreach container, how do I pass the variables as input to an OLE DB Destination on the Data Flow?
Also, how would I update the original source table where source.id = objRects.id?
Thank you for your assistance. I have spent the day trying to figure this out (and thought it would be simple), but I am just not getting SSIS. Sorry if this has been covered.
Dear All! My package has a Data Flow Task. In Data Flow Task, I use a Script Component and a OLE BD Destination to transform data from txt file to database. Within Data Flow Task, I want to call File System Task to move file to a folder or any Task of "Control Flow" Tab. So, Does SSIS support this task? Please show me if any Thanks
I'm currently setting variables at the package level with an ExecuteSQL task. This works fine. However, I'm now starting to think about restartability midway through a package. It would be nice to have the variable(s) needed in a data flow set within the data flow so that I only have to restart that task.
Is there a way to do that using an SQL statement as the source of the value in a data flow?
OR, when using checkpoints will it save variable settings so that they are available when the package is restarted? This would make my issue a moot point.
I have a data flow task in which there is a OLEDB source, derived column item, and a oledb destination. My source is a SQL command, that returns some values. I have some values, that I define in the derived columns, and set default values under the expression column. My question is, I also have some destination columns which in my OLEDB destination need another SQL command. How would I do that? Can I attach two or more OLEDB sources to one destination? How would I accomplish that? Thanks
Kindly i need support in this issue, i create task flow import from flat file and store in database but i need to save all result for task into specific table
I have developed some packages to load data into "Fact" tables in the data warehouse. Some packages are OK, other ones not. What is the problem?: some packages load fact tables with lots of "Lookup - Data Flow Transformation" into the "data flow task" (lookup against dimension tables) but they are very very slow, too much slow to be choosen as a solution.
Do you have any other solutions to avoid using "Lookup - Data Flow Transformation"? Any other solution (SSIS, TSQL and so on....) is welcome to speed up the Fact table loading process.
I am looking for a way to leave a Data Flow Task destination table name as-is, and have SSIS auto-create the table if it doesn't exist already.
I searched on this in the forums but based on the question it's difficult to kow if it has been answered or not.
Details:
I am writing some SSIS packages that need to be executable on another server. Many of the Data Flow Tasks copy data (such as from a Fuzzy Grouping transformation, and lots of other stuff) into a new table. But the other server will not have these tables set up for the first run.
My current solution is to check information_schema.tables and drop IF EXISTS. But, then the Data Flow Task will not work (becase table does not exist). So, I script to new window a create table statement based on the existing table that I use in my dev environment. This is a hack and I want to find a better method.
It is quite possible (although unlikely) that the source columns could be changed in the future, or some query used to pull the data might be modified. If this happens, then I would need to change the CREATE TABLE Execute SQL task. I want my package to accommodate without having to modify it.
When I use the Import/Export Wizard, I can select a table name from the drop down list OR type in a new name. When I type in the new name, it assumes I want to create the table. NOW, is there a way to mimic this in BI Developer Studio? Yep, I saved the Wizard version of the SSIS package and all it does is run a CREATE TABLE statement first.
I am looking for a way to leave a Data Flow Task destination table name as-is, and have SSIS auto-create the table if it doesn't exist already.
Using SSIS 2012 (within Visual Studio) on Windows 7.
Before allowing my Data Flow task to fire, I'd like to check the target table (OLE DB Destination) for a specific date value in a specific field. I've seen how the Lookup Task is commonly used to check for dupes before inserting, but I'm not able to use that method because the data value I want to search the table for is contained in a Global Variable (let's say "MyVariableDate").Â
Is there any way to check for any records in a target table where Date1 = MyVariableDate (i.e. scanning the entire table for any occurrence of MyVariableDate in the Date1 field)?
Hi all! I recently started working with SSIS and one of the things that is puzzling me the most is what's the best way to go:
A small control flow, with large data flow tasks A control flow with more, but smaller, data flow tasksAny help will be greatly appreciated. Thanks, Ricardo
Hi, I use lookups to map surrogate of level 1 dimensions to my fact tables in SSIS. But how to handle a level 2 dimension with a ValidFrom and a ValidUntil date field? I do not use an IsCurrent column, because this could problem with late arriving facts.
- In dts I used an SQL statement like this:
update SA SET SA.DimProdRef = Dim.RecordID FROM SAWarenEingang SA, DimProd Dim where SA.ProduktNumber = Dim.ProduktNumber and SA.ArtikelkontoBewegungsdatum between Dim.ValidFrom and Dim.ValidUntil
Now in SSIS I want to handle the whole thing in the data flow without using a staging table: - Using Lookups: I would have to pass the date column for each inside the fact table into the lookup. That does not work. - Using Execute SQL in the data flow: would be very slow, because the statement will be executed for any line in the dataflow
I have a table that I'm loading as part of a control flow that in turn is copied to a target table by using a data flow task. I am doing this because a different set of fields may be used from the source entry to create the target entry based on a field in the source table. That same field may indicate that multiple entries need to be created in the target table from one source table entry for which I use a multi-cast transformation.
The problem I'm having is that no matter how many entries there are in the source table, the OLE DB Source during execution only shows 7,532 entries being taken from the source table. If there are less than 7,532 entries in the source table, everything processes fine. More than 7,532 and the data flow task only takes 7,532 and then seems to hang. It also seems as though only one path of the multi-cast transformation is taken when the conditional split directs a source entry down that path.
Seems like a strange problem I know, but any insight anyone could provide is appreciated. Thanks.
