Dear all,
Now I am planning to flow data from SQL Server 2005 in Singapore to SQL Server 2000 in Hong Kong.
I am planning to write DTS or VB.Net Program or SQL Stored Procedures. Which is better? Is there any problems or important notes to take care from SQL2005 to SQL2000???
I am afraid when doing in next week, I will face some fatal errors or data transmission problems or conversion problems!!!
Appreciate your help,
Hi There,
I need to pull data using input from one table in sql server 2005. I have to query against the sql server 2000 database and pull data into sql server 2005. I have a list of ids that I have to pass to a query to get the desired data. What is the best practice for this. Can I use SSIS or do I need to build an app in C#? Can somebody please reply back?
Thanks a lot!!
Hello:
I have an old database created in SQL Server 2000,
now I can open, access it in SQL Server 2005 Management Studio, but I can't create Data Diagrams.
Please advise on how to make it work....
Thank you
Hi, I am trying to edit some data from a SQL2000-datasource in ASP.NET 2.0 and have a problem with a column that has bit-data and is used for selection. SQL2005 works fine when declaring <SelectParameters> <asp:Parameter DefaultValue="TRUE" Name="APL" Type="boolean" /> </SelectParameters>When running this code with SQL2000, there are no error-msgs, but after editing a record the "APL"-column looses its value of 1 and is set to 0. Looks like an issue with type-conversion, we've hit incompatibilities between SQL200 and 2005 with bit/boolean several times before. So, how is this done correctly with SQL2000? (I've tried setting the Type to "int16" -> err. Also setting Defval="1" gave an err) ThanksMichael
View 2 Replies View RelatedMy web project (ASP.NET 2.0 / C#) runs against sql server 2000 and uses the System.Data.SqlClient.using System.Data.SqlClient;
I use System.Data.SqlClient.SqlConnection and System.Data.SqlClient.SqlCommand to make the connections to the database and do selects and updates. Is it correct to continue to use these against SQL Server 2005? I ask because I made a connection string (outside of .Net) for SqlServer 2005 using the SQL native provider and it had the following - Provider=SQLNCLI.1 and any connection strings I had made (also outside of ASP.NET) fro SQL Server all used Provider=SQLOLEDB.1. This is why I wondered if there is a different SqlClient in .Net 2.0 for SQL Server 2005?
Cheers
Al
Hello:Does Sql Server 2005 Express support data migration from Sql Server 2000.
View 2 Replies View Relatedhi, does anyone know how I can make a connection to a 2000 db thru ssis?
View 8 Replies View RelatedAn SSIS package to transfer data from a DB instance on SQL Server 2005 to SQL Server 2000 is extremely slow. The package uses an OLEDB Source to OLEDB Destination for data transfer which is basically one table from sql server 2005 to sql server 2000. The job takes 5 minutes to transfer about 400 rows at night when there is very little activity on the server. During the day the job almost always times out.
On SQL Server 200 instances the job ran in minutes in the old 2000 package.
Is there an alternative to this. Tranfer Objects task does not work as there is apparently a defect according to Microsoft. Please let me know if there is any other option other than using a Execute 2000 package task or using an ActiveX Script to read records from one source and to insert them into the destination source, which I am not certain how long it might take and how viable will that be?
Any inputs will be much appreciated.
Thanks,
MShah
Hello,
I have SQL Server 2000 and 2005 running on the same server. My current system is in SQL Server 2000 and the new system is in SQL Server 2005. My users will be using SQL Server 2000 for the most part, But for the part the processes that have been migrated to 2005, they will be using SQL Server 2005 as well. The database schema is different on both servers eventhough the data will be similar in most respects.
Is there is a way through which any data that is inserted/updated in SQL Server 2000 via content Management System/ manually/ via a batch job, the data is automatically populated in SQL Server 2005 tables or vice versa?
Please advice at the earliest.
Thanks.
Hello everybody,
Can anyone give the best way to transform data from a DB on sql server 2000 to a DB on sql server 2005?
Note: - the source DB and the destination DB are different in their structure
- We need the conversion way to be scripted to can be done on different site.
thanks
How can i migrate data from Sql Server 2000 to Sql Server 2000
View 1 Replies View RelatedI have a large (huge) database that I want to copy onto my new slq 2005 test server. I'm leaning toward detaching the data on my 2000 box, duplicating it, copying it to my new 2005 machine, and attaching it. Is it possible that it could be that simple? If not, how is it done? Thanks a bunch for any help or pointers to the articles I was totally unable to find on the subject.
View 3 Replies View RelatedHi,
I need to develop a Report using SSRS 2005, wher SQL Server 2000 as Database. Can we do that ?
If yes how to Create Data Source for it ?
our Network has both SQL 2000 and SQL 2005 Database Servers.
Hi there,
I got a shared web hosting server with sql server db which is 2k, and now ive got dedicated with godaddy where i installed sql 2005 express edition, now my shared hosting ppl gave me db bkup which i cant restore , so i copied all data from asp.net web based enterprise manager into an excel sheet and am trying to copy that data into sql2005 management studio express, however it doesnt let me do that.
I am trying to use openrowset, but my knowledge in sql is minimal so cant run that either.
can you please please please tell me how to do this asap, its very urgent as my contract runs out with shared hosting on 31 and ive to switch this site live by tomorrow.
please let me know asap wat to do, i can pay also for this job?
amit
amitsharma1977@gmail.com
Dear Sir/Madam,
I have some data which is stores in Foxpro dbf files & Access 200 MDB file. Can i extract import these files into SQL Server 2005
Hi,
I'm a newbie on SSIS and am trying to grasp my way through this.
I am trying to copy data from a Sql Server 2000 database to a simplified table in Sql Server 2005 database.
What I want is to move the data to a staging table, then drop the main
table and rename the staging table to the main table, to minimize the
down-time of the data. I can't get the workflow to work, because the
staging table has to exist when I run the package. I thought I could
use an "Execute SQL" task to generate the table before I would run the
task, but that doesn't work. Am I going about this the wrong way? Is
there an optimal solution to this problem so my data can be accessible
as much as possible.
Regards,
Atli
Hi,
We are in the process of upgrading a SQL Server 2000 database to 2005. For the mean time, we're trying it out on SQL Server Express 2005. My question is, can reports in SSRS 2005 pull data from SQL Server 2000 in case both are installed side by side in the same machine and the 2000 version is the default instance while the 2005 express edition is the named instance?
Thanks a lot!
All,
I apologize for not doing the legwork to see if i can answer my own question, but I am close to a loosely planned SQL 2005 migration and don't have time and resources to test my own theories.
Is there a way for a Reporting Services 2000 server to connect to SQL server 2005 databases? I've tried creating a new data source and changing a report to this data source, but it seems like the report is still using the old data source. I'm guessing i might need to register new data providers on the 2000 RS server and then change the existsing data sources.
Ideas?
Thx in advance,
-Peter
My server is a dual AMD x64 2.19 GHz with 8 GB RAM running under Windows Server 2003 Enterprise Edition with service pack 1 installed. We have SQL 2000 32-bit Enterprise installed in the default instance. AWE is enabled using Dynamically configured SQL Server memory with 6215 MB minimum memory and 6656 maximum memory settings.
I have now installed, side-by-side, SQL Server 2005 Enterprise Edition in a separate named instance. Everything is running fine but I believe SQL Server2005 could run faster and need to ensure I am giving it plenty of resources. I realize AWE is not needed with SQL Server 2005 and I have seen suggestions to grant the SQL Server account the 'lock pages in memory' rights. This box only runs the SQL 2000 and SQL 2005 server databases and I would like to ensure, if possible, that each is splitting the available memory equally, at least until we can retire SQL Server 2000 next year. Any suggestions?
When I proposed start to use SQL Server 2005 for new VS 2005 web sites, one of my co-workers responded that
we will update the old SQL Server 2000 databases to SQL Server 2005 when we are ready to use 2005 SQL Server.
Questions:
1. Any expected problems to upgrade old 2000 databases to new 2005 SQL Server?
2. I have installed both 2005/Management Studio Express and 2000/Enterprise Manager in my PC. Any expected
problems when running both 2000 and 2005 SQL Server at the same database server?
3. What is the best configuration for running SQL Server 2005 when we have old 2000 databases? Upgade or not upgrade?
TIA,
Jeffrey
Hi
We would like to install Sql 2005 Enterprise Edition (including database engine, reporting service, integration service and analysis service) as a sepearte instance on a server which already has Sql 2000 with reporting services and analysis services. We do not want to disturb the existing sql 2000 setup.
If we do that then what will happen to my earlier sql 2000 reporting service? Will it be upgraded to sql 2005 reporting service? I heard that reporting services are instance unaware application. Where will be the default reporting service database available?
Please help us.
Regards,
Sankar N
When I try to migrate a database on a SQL Server 2000 server to a SQL Server 2005 server with the Copy Database Wizard of the SQL Server Management Studio, I'm confronted with the following problem;
Performing operation...
- Add log for package (Success)
- Add task for transferring database objects (Success)
- Create package (Success)
- Start SQL Server Agent Job (Success)
- Execute SQL Server Agent Job (Error)
Messages
* The job failed. Check the event log on the destination server for details. (Copy Database Wizard)
When I take a look at 'Event viewer' on the SQL 2005 server, the following error is displayed;
InnerException-->An error has occurred while establishing a connection to the server.
When connecting to SQL Server 2005,
this failure may be caused by the fact
that under the default settings SQL Server does not allow remote connections.
(provider: Named Pipes Provider, error: 40 - Could not open a connection to SQL Server)
I already enabled the MSSQLSERVER network configuration protocols (TCP/IP and Named Pipes ).
How do I solve this problem?
Hi,
We have an old machine which holds SQL server 2000 database. We need to migrate a whole database to a new machine which has SQL server 2005.
When we tried to move whole database using Import and Export Wizard, only tables can be selected to import/export. However we want to import/export the whole database, including tables, stored procedure, view, etc. Which tool should we use?
Thanks.
Hi,
We have an old machine which holds SQL server 2000 database. We need to migrate a whole database to a new machine which has SQL server 2005.
When we tried to move whole database using Import and Export Wizard, only tables can be selected to import/export. However we want to import/export the whole database, including tables, stored procedure, view, etc. Which tool should we use?
Thanks.
Hi Guys,
I have had SQL Server Express and Sql Server Management Studio Express installed on my machine for some time and recently tried to install a trial of SQL Server 2005 as well. (Yes, I'm migrating from Visual Studio Express to Visual Studio Professional, just as in tended!)
Everything went fine except that nothing seemed to be installed. I searched in all the obvious places - both on the Start/Programs menu and on the hard-drive: nothing.
A check under Add/Remove Programs showed that Sql Server 2005 Express was installed, but called SQL Server 2005.
So after a number of retries in which the install program kept saying that there was nothing to install, I selected every option under Advanced in the intall process. This resulted in stuff being installed and I now have SQL Server 2005 running on my machine, but no SQL Server Manager icon.
My questions are:
Where can I find the SQL Server Manager executeable?
Has anyone installed SQL Server Express, SQL Server Mangement Studio Express, SQL Server 2005 and SQL Server Management Studio on a single machine successfully? If so, what order did you install them in? (I'm planning on uninstalling everything SXQL Server related and starting again.)
Thanks very much for your help.
Regards
Gary
Hi
I have created a linked server from SQL Server 2005 (SP 1) to SQL Service 2000 (SP 4) with a sql server login that is available on both servers but with different passwords and permissions.
I am getting the following error while accessing the linked server in management studio based on the scenario given below ;
------ Error Message Starts
OLE DB provider "SQLNCLI" for linked server "(SQL Server 2000 instance name)" returned message "Communication link failure".
Msg 10054, Level 16, State 1, Line 0
TCP Provider: An existing connection was forcibly closed by the remote host.
Msg 18456, Level 14, State 1, Line 0
Login failed for user 'abc'.
------ Error Message Ends
Consider login name is abc.
Now this login abc has sysadmin rights on sql server 2005.
The same login abc has only db_datareader rights on sql server 2000 on just one database and is not associated with any fixed server role.
I have configured the linked server using the following options;
1. I have tried impersonating login from SQL Server 2005 to SQL Server 2000 .
2. I have also tried specifying remote login / password option.
Anyone having any idea, would be of great help.
Regards,
Salman Shehbaz.
Can I connect from a SQL Server 2005 database to a SQL Server 2000 database, without establishing a linked server connection.
I need to fire a SELECT query on a SQL Server 2000 database, but don't want to add it as a linked server. Is there any way I can do this or its not possible??
We have a project already developed iusing VS 2003 Enterprise architect edition using sql server 2000(have lots of table and stored procs etc.)
Now planning to switch to Sql server 2005 are there any issues associated with the switch.
I mean front end programming wise asp.net and vb.net front end codes do they work straight away or need to make any changes to all the front end codes, we are using datasets, data readers calling stored procs and also using lot of hash tables and XML object to make bulk loads to sql server via sqlxml3.0 sp3.
Please help thank you very much for the information.
Hi all,I just asked some people to help me out and phone microsoft with thefollowing information, kindly they refused unless we setup a supportcontract with them first, for pre-sales information. (That really doesnot sound like good business sense to me - anyway here is our problem,if anyone could help thanks)."To tell and ask microsoft:We will be setting up a microsoft sql server 2000 instance running on awindows 2003 server.1) We need to check this can run alongside a microsoft 2003 sql server(either workgroup or standard edition), on the same machine. Are thereany .dll clashes if we do this? If there are can we run SQL Server2000, in a virtual machine running windows 2000 professional. (I have alicenced copy we can use for this).2) If we run one instance of 2000, and one of 2003 of the sql servers,can one use the processor licence model, and one use the CAL licencemodel."Thanks for any help, and any idea why they actually force you to usenews groups for pre-sales information?David
View 4 Replies View RelatedHi,
I have an interesting situation here. I have a SQL Server 2000 database which is attached to SQL Server 2005. The database (SQL 2000) however only has service pack 3 applied. I need to apply SP4 before I can move forward with SQL 2000->2005 upgrade. The question: can I somehow apply this support package with my current configuration or should I install full SQL 2000 front-end anew (which I don't have at the moment)? Whenever I try to run SQL 2000 SP4 it complains "SQL Server 2000 is not installed on this machine."
The server I try to install the update is Windows Server 2003 R2 Standard Edition x64. SQL Server 2000 database itself is x86 (obviously).
Thanks.
I'm trying to link SQL Server 2000 sp3 to SQL 2005 64 bit. I keep getting Error 17 sql server does not exist or access denined. I tried adding remote user mapping and chaning the linked server properties to "Be made using this security context" without any success.
Any help is appreciated.
I don't know why my application on the internet try to access the SQL Server 2005, when the host still having the 2000 edition. I put the following connection string:
Data Source=##DBSERVER##;Initial Catalog=##DBNAME##;User ID=##DBUSER##;Password=##DBPASSWORD##;
Isn’t everything fine with that? I created the table by host but dosen’t work. I’m wondering if can I conect straight with Data Base, without register in the server, like with mdb?
This is the error that I’m getting.
When connecting to SQL Server 2005, this failure may be caused by the fact that under the default settings SQL Server does not allow remote connections. (provider: Named Pipes Provider, error: 40 - Could not open a connection to SQL Server)
I have a database called 'DB1' in SQL Server 2000. I want to create the same database in SQL Server 2005 Express including the original data in tables.
How would I do that? I cannot find any option to do this upgrade in SQL Server Management Studio.