When attempting to update or delete data using Microsoft Access, this error often occurs. The data can be updated or deleted directly through SQL Server and the problem is not resolved by closing and restarting access. The tables accessed have primary keys.
Any ideas?
It occurrs with both Access 2 and Access 95.
I'm using SQL Server 2012 Analysis services in Tabular mode and connected to Oracle Database and while importing, I'm getting below error after importing some rows.
OLE DB or ODBC error: Accessor is not a parameter accessor.. The current operation was cancelled because another operation in the transaction failed.
Hello Guys,
I am currently experiencing a Sql error: operation cancelled by user.
I don't know where this error come from. Is it from ADO.NET or SQL Server 2000.
This error doesn't always occur. It only occurs when many users access the web site. I want to know who issue the error. Why issue the error.
Let me know if you have any ideas
Thanks in advanced
When I highlight a few
partitions and start processing, the process occasionally stops with a
message that operation has been canceled, like this:
Response 3
Server: the operation has been cancelled.
Response 4
Server: the operation has been cancelled.
Response 5
Server: the operation has been cancelled.
..etc...
(no further error message details are provided)
SQL profiler shows that batch was completed (but rowcount shown in process progress log is too small).
Analysis
Services profiler shows no messages at that time at all. It just shows
messages when it started, and when I restarted the processing.
The Analysis trace appears to be stopped when processing stops with "Server: the operation has been cancelled."This
is an occasional error and sometime occurs within 15-20 minutes from
starting to process. It could fail on 1st partition in the process list
, or on some partition in the middle. Some partitions might run for a
few hours and not error out, but sometimes it fails quickly.I was not sure if this is an issue with the underlying fact data, so I broke up the last partition where it failed into 5 smaller partitions, they processed OK separately.I think restarting SQL Server and SSAS helps to process a few more partitions. Some that failed with this problem process OK after restart, but some fail again.
(apologies for re-posting, wanted to put under more specific thread title)
Microsoft SQL Server 2000 - 8.00.2039
Got this error:
Could not complete cursor operation because the table schema changed after the cursor was declared. SQLCode: 16943 SQLState: HY000
Is this a known issue? I suspect the application logic may cause this error. Please advise.
Thanks a lot!
I'm trying to implement a sp_MSforeachsp howvever when I call sp_MSforeach_worker
I get the following error can you please explain this problem to me so I can over come the issue.
Msg 16958, Level 16, State 3, Procedure sp_MSforeach_worker, Line 31
Could not complete cursor operation because the set options have changed since the cursor was declared.
Msg 16958, Level 16, State 3, Procedure sp_MSforeach_worker, Line 32
Could not complete cursor operation because the set options have changed since the cursor was declared.
Msg 16917, Level 16, State 1, Procedure sp_MSforeach_worker, Line 153
Cursor is not open.
here is the stored procedure:
Alter PROCEDURE [dbo].[sp_MSforeachsp]
@command1 nvarchar(2000)
, @replacechar nchar(1) = N'?'
, @command2 nvarchar(2000) = null
, @command3 nvarchar(2000) = null
, @whereand nvarchar(2000) = null
, @precommand nvarchar(2000) = null
, @postcommand nvarchar(2000) = null
AS
/* This procedure belongs in the "master" database so it is acessible to all databases */
/* This proc returns one or more rows for each stored procedure */
/* @precommand and @postcommand may be used to force a single result set via a temp table. */
declare @retval int
if (@precommand is not null) EXECUTE(@precommand)
/* Create the select */
EXECUTE(N'declare hCForEachTable cursor global for
SELECT QUOTENAME(SPECIFIC_SCHEMA)+''.''+QUOTENAME(ROUTINE_NAME)
FROM INFORMATION_SCHEMA.ROUTINES
WHERE ROUTINE_TYPE = ''PROCEDURE''
AND OBJECTPROPERTY(OBJECT_ID(QUOTENAME(SPECIFIC_SCHEMA)+''.''+QUOTENAME(ROUTINE_NAME)), ''IsMSShipped'') = 0 '
+ @whereand)
select @retval = @@error
if (@retval = 0)
EXECUTE @retval = [dbo].sp_MSforeach_worker @command1, @replacechar, @command2, @command3, 0
if (@retval = 0 and @postcommand is not null)
EXECUTE(@postcommand)
RETURN @retval
GO
example useage:
EXEC sp_MSforeachsp @command1="PRINT '?' GRANT EXECUTE ON ? TO [superuser]"
GO
I want to import via DTS to big table only the records that changed last day. can i do it without a time field? because this is a key table for DWH and not a fact table.
THX
Inon
i have a databse on a server and i just created an image on the database. now i want to just copy the changed data in all tables withing the database not the whole database eveytime.
View 5 Replies View RelatedHi..
I got 10 Tables with data in it for 100 Loans. The data can be Good and Bad .....
I had a Update Proc which Updates the 10 tables with the Good data what ever i pass...for this 100 Loans
Tha Proc will update the existing data in all tables whether it is Good or Bad Data.
when the updating is completed I want to know what are the Loans that were updated where there is a Bad Data in atleast one Field of the 10tables.
I don't want to check field by field in each table.... if there is a bad data and my proc updated with a Good Data i want to know that Loan.
Can any one has an idea on this,,,,
Thanks
Bob
I have a need to insert rows into an Audit type table when valueschange in certain fields in a table. I thought I could do this via atrigger. However, on requirement is to include in the audit both theold and new value.Is there a "simple" way to do this? I know I could query the tablebefore the update and compare to what the new value is and reactaccordingly.Just wondering if there is something nifty in Sql Server that I ammissing that could help me with this.Thanks in advance for your help.Bill
View 3 Replies View Related
Is there a Tool/Utility/StoredProcedure/Query/View that can tell me the last time the data in a particular table was changed?
That change can be the result of either an ADD , INSERT, or DELETE statement.
I am using SQL Server 2005.
Hi,
I'm trying to transfer data from a DB2 database to a MS SQL Server database (approx. 150 000 rows).
When I execute the package, the process is always cancelled (In output window: SSIS package "DB2_test_TranAddl.dtsx" finished: Canceled.)
I use a view on DB2 to provide the data and I can modify it to return only a few rows. To achieve this, I use a WHERE clause: WHERE OUTLET_NO Between X And Y.
When I try OUTLET_NO Between 1 And 5 (255 rows) the package executes successfully.
When I try OUTLET_NO Between 5 And 10 (388 rows) it works.
When I try OUTLET_NO Between 1 And 10 (643 rows) it fails!!
Any idea?
On sqlserver 2000 transactional replication:
How would I best go about changing a published table's column from smallint to int? I could not find anything about it in BOL or MS.com. I do not think EM/Replication Properties allows the change. I suspect I have to run "Alter Table/Column" on the Publisher and each Subscriber the old-fashioned way. Is that true?
Thanks!
Some logic for calculating the count for changed values.
E.g. :--
ID VAL
1 10
1 20
1 20
1 20
1 10
1 10
1 10
1 20
1 10
Here in the above table my value changed from 10 to 20 and so.., so Val column value changed 4 times, so I need the result like :
id count
1 4
I am trying to edit an SSIS package due to a change in the schema of one of the source tables. When I open the package in Visual Studio, I see the exclamation mark on the object but before I can make change or go to edit anything in the package, I hear the "dumphhh" sound that indicates an error. There is no dialogue box but the program is now locked up. Then after 10 - 20 seconds the program closes.
How am i supposed to add the new column to the data source metadata if I can't edit the package?
My objective is to extract the source table data from SQL/Oracle or CSV files and load into destination table using CDC mechansim. May I know the steps required to implement in production from development.
View 3 Replies View RelatedHi,
I have scheduled a package "MyPackage" in a SQL Server Agent Job. It runs periodically with success.
Sometimes the package status is shown as "Cancelled" what led me to assume some coincidences.
So I took a look at the eventlog which contains the following message:
Event Type: Information
Event Source: SQLISPackage
Event Category: None
Event ID: 12290
Date: 30.01.2006
Time: 08:00:42
User: NT AUTHORITYSYSTEM
Computer: MYSERVER
Description: Package "MyPackage" has been cancelled.
I assume that the problem occurs when a user locally logs off from the Server where the SSIS-service is running.
Why does this happen? The Service runs under the local system account and so does the SSIS Job.
Can anybody help here?
THX
Fridtjof
I recently upsized my acess 2000 db to SQL 2000, but I am now having errors . . .
Error Type:
Microsoft OLE DB Provider for ODBC Drivers (0x80040E07)
[Microsoft][ODBC SQL Server Driver][SQL Server]The sum or average aggregate operation cannot take a nvarchar data type as an argument.
/data_count.asp, line 4
The code within the asp file:
<% dataSQL = "SELECT SUM(filesize) FROM DL where show=1"
Set datacount = my_Conn.Execute(dataSQL)
anBytes = datacount(0)
%>
Can someone point me to a solution?
Thanks!
isn't there an automatic log of some sort to check and see what exactly was changed by a given SQL command? A stored proc was ran and I need to figure out what exactly it changed in the underlying table.
View 3 Replies View RelatedStarted a publication on a few tables, and decided to cancel it. Now there are no publications set up, but the sharing hand is still there on the database, and agents all over the place. Boss is angry, can I tidy up this mess?
I can't convince him I haven't made changes to the production database...
i am trying to write a store procedure which inserts data from flat file to table but i want to align the rows for data transformation, like which column should be transferred to which column on the existing table. can anyone help me with this..i know how to do it thru DTS or SSIS but just want it in script...
cheers
Derek
I need reflecting changes of csv file in oracle DB. Suppose, I load single csv file in oracle DB which contains 10 rows. After some time, I have loaded another CSV file which has the modified row of the previously loaded csv file. So, how can I capture the CSV changes and how it is going to get reflected in oracle DB?There is no unique column in csv file to identify particular row.
View 3 Replies View RelatedHi,
I have a problem with a database on our SQL 7 system . I had set away a restore from tape, but cancelled it after users complained that a different database was performing slowly . However, this has resulted in the database being marked as inaccessible when trying to access it through SQL Enterprise Manager and trying to access it through Query Analyser produces message 927 informing me that the database is in the middle of a restore . How do I remove this error and make the database accessible again??
Many thanks in advance
Peter Burton
(IT Support)
Durham Aged Mineworkers Homes Association
Hi,
I am running two jobs background using SQL agent. There was a power shut down and the two job i was running in back groung were cancelled leaving the below message
The job was stopped prior to completion by Shutdown Sequence 0.
Can any one tell me why this happened although I am running them in back ground.
I am not sure where the servers are located and if they are located in the same bulding .. do u think it is bcoz of tis power shut down only?
We have a table in our legacy database system representing health insurance polices. The customer can, and usually does, renew the policy after 12 months. The legacy database uses the renewal string "99/99/9999" to signify "continuous until cancelled", in other words, "forever", or until cancelled
We need to convert this legacy table into a sql 2005 table, which supports the concept of "forever". But how can we do this? ("99/99/999" is not a valid sql date type and we don't want to use varchar for dates.)
TIA,
barkingdog
how to solve this problem ....
I want to select te sum of nvarchar column and this error always happen
what is the solution this is my query
"SELECT Datein AS Date,SUM(Durm) AS DurationMin, COUNT (*) AS 'Number of Hits' FROM Rayyan_Log WHERE (DNIS = '"+DropDownList1.SelectedItem.Text +"') AND (Datein between '"+TextBox2.Text+"' and '"+TextBox3.Text+"') GROUP BY Datein ORDER BY Datein"
How can I make it work when I need to pull out a field which is text type using a stored procedure? Please help!!!Thanks
I am getting the following error
Error 409: The assignment operator operation could not take a text data type as an argument
===========my sp=================================
CREATE PROCEDURE [dbo].[sp_SelectABC]
(@a varchar(50) output,
@b text output
)
AS
set nocount on
select @a=name, @b= description from ABC
GO
I have Data Flow task that contains 50 components.
My computer configuration: 1 GB RAM Microsoft Windows Server 2003
Periodicaly when i try to save package after making some changes Out of memory ... exceptions message box appears , and soon after this Not fatal error occurs ... message box shows . If i close solution and open it again all my 50 components disappears --instead I see clear list, and all my work losen.
Such "Not fatal errors" making hell out of job -- every time I need to change package i must add package to archive!!!
Hi,
My scenario:
I have a master securities table which has 7 fields. As a part of the daily process I am uploading flat files into database tables. The flat files contains the master(static) security data as well as the analytics(transaction) data. I need to
1) separate the master (static) data from the flat files,
2) check whether that data is present in the master table, if not then insert that data into the master table
3) If data present then move that existing record to an history table and then update the main master table.
All the 7 fields need to be checked to uniquely identify a single record in the master table.
How can this be done? Whether we can us a combination of data flow items or write a sql procedure to do all this.
Thanks in advance for your help.
Regards,
$wapnil
We are running Microsoft SQL 2005 Express.
All queries on our Production database are timing out. Viewing the error log file the following show up over and over again:
Autogrow of file 'tempdev' in database 'tempdb' was cancelled by user or timed out after 3937 milliseconds. Use ALTER DATABASE to set a smaller FILEGROWTH value for this file or to explicitly set a new file size.
Autogrow of file 'Prod' in database 'Production' was cancelled by user or timed out after 33156 milliseconds. Use ALTER DATABASE to set a smaller FILEGROWTH value for this file or to explicitly set a new file size.
Our production database is about 1 gig in size with 3.5 million records. I tried setting the autogrow from 30% which it was before to 100MB, but no luck, still timing out and getting the errors above. Permission should be all good, nothing has changed.
There is about 50gigs of available disk space as well, so that's not the problem. Thanks for the help.
We've been using SQL Server 2005 for a while as the db for our web app. Everything has been working fine, until yesterday when we started getting a "Arithmetic operation resulted in an overflow. (System.Data)" error message when trying to connect from SQL Server Management Studio or from our web app. This only happens when trying to connect remotely, although remote connections have worked for us perfectly in the past. The full error message is reproduced below. Thanks ahead of time for any help. ===================================Cannot connect to serverName===================================Arithmetic operation resulted in an overflow. (System.Data)------------------------------Program Location: at System.Data.SqlClient.TdsParser.ConsumePreLoginHandshake(Boolean encrypt, Boolean trustServerCert, Boolean& marsCapable) at System.Data.SqlClient.TdsParser.Connect(ServerInfo serverInfo, SqlInternalConnectionTds connHandler, Boolean ignoreSniOpenTimeout, Int64 timerExpire, Boolean encrypt, Boolean trustServerCert, Boolean integratedSecurity, SqlConnection owningObject) at System.Data.SqlClient.SqlInternalConnectionTds.AttemptOneLogin(ServerInfo serverInfo, String newPassword, Boolean ignoreSniOpenTimeout, Int64 timerExpire, SqlConnection owningObject) at System.Data.SqlClient.SqlInternalConnectionTds.LoginNoFailover(String host, String newPassword, Boolean redirectedUserInstance, SqlConnection owningObject, SqlConnectionString connectionOptions, Int64 timerStart) at System.Data.SqlClient.SqlInternalConnectionTds.OpenLoginEnlist(SqlConnection owningObject, SqlConnectionString connectionOptions, String newPassword, Boolean redirectedUserInstance) at System.Data.SqlClient.SqlInternalConnectionTds..ctor(DbConnectionPoolIdentity identity, SqlConnectionString connectionOptions, Object providerInfo, String newPassword, SqlConnection owningObject, Boolean redirectedUserInstance) at System.Data.SqlClient.SqlConnectionFactory.CreateConnection(DbConnectionOptions options, Object poolGroupProviderInfo, DbConnectionPool pool, DbConnection owningConnection) at System.Data.ProviderBase.DbConnectionFactory.CreateNonPooledConnection(DbConnection owningConnection, DbConnectionPoolGroup poolGroup) at System.Data.ProviderBase.DbConnectionFactory.GetConnection(DbConnection owningConnection) at System.Data.ProviderBase.DbConnectionClosed.OpenConnection(DbConnection outerConnection, DbConnectionFactory connectionFactory) at System.Data.SqlClient.SqlConnection.Open() at Microsoft.SqlServer.Management.UI.VSIntegration.ObjectExplorer.ObjectExplorer.ValidateConnection(UIConnectionInfo ci, IServerType server) at Microsoft.SqlServer.Management.UI.ConnectionDlg.Connector.ConnectionThreadUser()
View 1 Replies View RelatedI want Compare two Table data and insert changed field to the third table ...
View 9 Replies View RelatedAfternoon
I'm getting the below error message:
Autogrow of file 'FORMS' in database 'FORMS' cancelled or timed out after 30547 ms. Use ALTER DATABASE to set a smaller FILEGROWTH or to set a new size.
FORMS.LDF file is 7613952 KBand the growth is 512MB .
By how much should I set the filegrowth? The users are complaining that the application is freezing on them.
This is sqlserver 2000.