Hi
in input we have a set of rows, each one with a column containing a string (eg: "AAOOOOAAAOOA").
We'd like to split this string (using a vb.net data script task) into tokens (eg: "AA", then "OOOO","AAA","OO","A"), and to output one line per token.
How can we achieve that with a vb.net data script task ? (Or anything else ?)
best regards
Thibaut
Hellow Folks.
Here is the Original Data in my single SQL 2005 Table:
Department: Sells:
1 Meat
1 Rice
1 Orange
2 Orange
2 Apple
3 Pears
The Data I would like read separated by Semi-colon:
Department: Sells:
1 Meat;Rice;Orange
2 Orange;Apple
3 Pears
I would like to read my data via SP or VStudio 2005 Page . Any help will be appreciated. Thanks..
Dear all,
I have a package in which, when a Cost Center has X as a value, I must insert not X but many different Y value, which are associated with X. How can I gather and treat those Y values? Only using a Script Component?
Regards,
Pedro Martins
I am facing an issue that Data flow task failing after loading 29000 rows out of 2lakhs rows.
I am loading data from .csv file to OLE DB Destination.
This data flow task is placed inside For each loop container.
is this issue because of any performance issue in SSIS packages such as buffer size.
find the error below:
DFT Load Data from FlatFile:Error: The conditional operation failed.
DFT Load Data from FlatFile:Error: SSIS Error Code DTS_E_INDUCEDTRANSFORMFAILUREONERROR.Â
The "DER Add Calc Columns" failed because error code 0xC0049063 occurred, and the error row disposition on "DER Add Calc Columns.Outputs[Derived Column Output].Columns[M_VALUE_NUM]" specifies failure on error. An error occurred on the specified object of the specified component. There may be error messages posted before this with more information about the failure.
DFT Load Data from FlatFile:Error: SSIS Error Code DTS_E_PROCESSINPUTFAILED. The ProcessInput method on component "DER Add Calc Columns" (48) failed with error code 0xC0209029 while processing input "Derived Column Input" (49). The identified component returned an error from the ProcessInput method. The error is specific to the component, but the error is fatal and will cause the Data Flow task to stop running. There may be error messages posted before this with more information about the failure.
[code]....
I am trying to load the data from one data base to another using the Task->Generate Script->tables (data only). Â So I saved the script of the data and when tried to run the script to the destination DB, getting the below error when ran the script.
Error: Visual Studio has encountered an exception. This may be caused by an extension.You can get more information by running the application together with the /log parameter on the command line, and then examining the file'C:UsersKK67AppDataRoamingMicrosoftAppEnv10.0ActivityLog.xm'. When tried opening the folder using the above path... don't see anything for AppData folder from that path.
I have the following table:id name1 yes2 no3 what4 is5 this6 niceThe amount of rows can vary from 1 to 50. I only need the name column.What SQL statement do I have to execute to get the following:yes,no,what,is,this,nice, (trailing , is acceptable)Thanks!
View 1 Replies View RelatedHi,
I need to return multiple rows into one single string
Declare @String varchar(1000)
Create table Cus (CusId Int,CusName varchar(10))
Insert into Cus Select 1,'John'
Union All
Select 2,'Bob'
Select * from Cus returns
1John
2 Bob
I need to return the all the rows from Cus table into a single string. The return is dynamic.
I do not know the number of rows returned
My result should be
@String = 1,John,2,Bob
How can i do that ?
I have a table having Style Nos (VarChar Col), how I can return values from multiple rows in a single string.
for Example if table is having 3 records :-
1. Style 1
2. Style 2
3. Style 3
It should return single value in this way
Style 1, Style 2, Style 3
I currently have some SQL code that is used to build a string that is a concatination of string values across multiple rows. The subqueries in the script sometimes return NULL values so I use the following statement to change the default behavior of the concatination operator which prevents my query from returning NULL:
SET CONCAT_NULL_YIELDS_NULL ON
Here's the code snippet:
select DISTINCT
(SELECT CASE WHEN (t1.MaskValue & HDR.TranTypeID)=1 THEN ' ' + t1.description ELSE '' END FROM transactiontypes t1 WHERE (t1.MaskValue & HDR.TranTypeID)=1) +
(SELECT CASE WHEN (t2.MaskValue & HDR.TranTypeID)=2 THEN ' ' + t2.description ELSE '' END FROM transactiontypes t2 WHERE (t2.MaskValue & HDR.TranTypeID)=2) +
(SELECT CASE WHEN (t3.MaskValue & HDR.TranTypeID)=4 THEN ' ' + t3.description ELSE '' END FROM transactiontypes t3 WHERE (t3.MaskValue & HDR.TranTypeID)=4) +
(SELECT CASE WHEN (t4.MaskValue & HDR.TranTypeID)=8 THEN ' ' + t4.description ELSE '' END FROM transactiontypes t4 WHERE (t4.MaskValue & HDR.TranTypeID)=8) +
(SELECT CASE WHEN (t5.MaskValue & HDR.TranTypeID)=16 THEN ' ' + t5.description ELSE '' END FROM transactiontypes t5 WHERE (t5.MaskValue & HDR.TranTypeID)=16)) as 'Transaction Type'
FROM HDResponse HDR
Here's the underlying table structure:
CREATE TABLE [dbo].[TransactionTypes](
[ID] [int] IDENTITY(1,1) NOT NULL,
[Description] [varchar](50) COLLATE SQL_Latin1_General_CP1_CI_AS NULL, [MaskValue] [int] NOT NULL) ON [PRIMARY]
CREATE TABLE [dbo].[HDResponse](
[ResponseID] [int] IDENTITY(1,1) NOT NULL,
[LoggedDateTime] [datetime] NULL,
[ResponseTypeTripID] [int] NULL,
[ResponseTypeID] [int] NULL,
[ResponseTypeObjectID] [int] NULL,
[ObjectID] [int] NULL,
[IDHolderID] [int] NULL,
[TransportCode] [int] NULL,
[CardID] [int] NULL,
[IssueCode] [smallint] NULL,
[EventDateTime] [datetime] NULL,
[Response] [bit] NULL,
[TranTypeID] [int] NULL)
ON [PRIMARY]
The problem I am having is I need to be able to use the query above in a view used for reporting. Unfortunately, you cannot use SET CONCAT_NULL_YIELDS_NULL ON in a view. This causes my query to return NULL if any of the subqueries return NULL. I could create a function to do something similar and reference the function in the query but I can't help but think there must be a way to get this done in a single query.
Any thoughts or ideas would be greatly appreciated.
Thanks!!!!!
The recipe preparation instructions are stored in a table by RecipeID. Â The prep instructions are in a single VARCHAR(MAX) column and look something like this: Â
1. Â Boil WaterÂ
2. Add noodlesÂ
3. Add cheese sauceÂ
4. Stir well
Now they want this single VARCHAR(Max) column broken into 2 columns - Step and Prep Instruction like this: Boil WaterAdd noodlesAdd cheese sauceStir well.I figure I can use the appearance of a number followed by a period and a space to determine the existence of a new row. Â How would I accomplish this in T-SQL?
Hello,
I have a survey (30 questions) application in a SQL server db. The application uses several relational tables. The results are arranged so that each answer is on a seperate row:
user1 answer1user1 answer2user1 answer3user2 answer1user2 answer2user2 answer3
For statistical analysis I need to transfer the results to an Excel spreadsheet (for later use in SPSS). In the spreadsheet I need the results to appear so that each user will be on a single row with all of that user's answers on that single row (A column for each answer):
user1 answer1 answer2 answer3user2 answer1 answer2 answer3
How can this be done? How can all answers of a user appear on a single row
Thanx,Danny.
Please can anyone help me for the following?
I want to merge multiple rows (eg. 3rows) into a single row with multip columns.
for eg:
data
Date Shift Reading
01-MAR-08 1 879.880
01-MAR-08 2 854.858
01-MAR-08 3 833.836
02-MAR-08 1 809.810
02-MAR-08 2 785.784
02-MAR-08 3 761.760
i want output for the above as:
Date Shift1 Shift2 Shift3
01-MAR-08 879.880 854.858 833.836
02-MAR-08 809.810 785.784 761.760
Please help me.
Hello All,
I am rather new to reporting on SQL Server 2005 so please be patient with me.
I need to create a report that will generate system information for a server, the issue im having is that the table I am having to gather the information from seems to only allow me to pull off data from only one row.
For example,. Each row contains a different system part (I.e. RAM) this would be represented by an identifier (1), but I to list each system part as a column in a report
The table (System Info) looks like:-
ID | System part |
1 | RAM
2 | Disk Drive
10| CPU
11| CD ROM |
Which
So basically I need it to look like this.
Name | IP | RAM | Disk Drive|
----------------------------------------------
A | 127.0.0.1 | 512MB | Floppy
So Far my SQL code looks like this for 1 item
SELECT SYSTEM PART
FROM System Info
WHERE System.ID = 1
How would I go about displaying the other system parts as columns with info
Any help is much appreciated!
I have a data flow task which has around 5 data flows (like the 2nd diagram shown here). These 5 simple flows with just a row count transformation in between. Now, I want to fail the entire task immediately even if one of the data flows failed. Right now if one flow fails the remaining flows fails after a long time, not immediately. How can I make it fails immediately.
The other I would like to do is Can I place these 5 data flows in a transaction, so that if one data flow fails, others data flows also roll backs? ( I assume its not possible)
Thanks
Hi!
I try to execute SQL Task with simple statement
insert T (comment) values (@Comment)
where comment is varchar(1000). I map package variable User::Comment (type string) to parameter @Comment in SQL Task properties. But when length of User::Comment greater than 10 characters SSIS returns errors:
Error: 0x0 at Execute SQL Task 1: String or binary data would be truncated.
Error: 0xC002F210 at Execute SQL Task 1, Execute SQL Task: Executing the query "insert T (comment) values (@Comment)" failed with the following error: "The statement has been terminated.". Possible failure reasons: Problems with the query, "ResultSet" property not set correctly, parameters not set correctly, or connection not established correctly.
The similar messages from this forum suggest using the OLEDB connection. I try this method too, but get the same result.
Error: 0x0 at Execute SQL Task 1: String or binary data would be truncated.
Error: 0xC002F210 at Execute SQL Task 1, Execute SQL Task: Executing the query "insert T (comment) values (?)" failed with the following error: "The statement has been terminated.". Possible failure reasons: Problems with the query, "ResultSet" property not set correctly, parameters not set correctly, or connection not established correctly.
What is it? Is this a bug, I made a mistake or I have SQL Server old version?
I have SQL 2005 (Developer Edition) 09.00.3054
TIA, Max.
I would like to take one table and split it into multiple files tablefile1, tablefile2, tablefile3, ... each with 50K rows. We currently has a package that does something like this; however, it performs poorly. The current package reads 50K rows writes them into a file and then writes the remaining rows into another file. Then it loops and renames the output file that contains (number of rows - 50K) of the last iteration to the input file of the new interation. Even though this works, as the file gets large (in the millions of rows) this rewriting the rows to a separate file is very disk io intensive and slow (over an hour). Ideally, it would be great to be able to split the table into files in 1 pass.
Another possibility would be to use an operation system command to split the file and just have the SSIS package read files and manipuate them (convert them to well-formed XML fragments). I am open any solution that could help me improve the performance. Let me know if you know of any OS file split utilities that can be called from a Job or SSIS.
I'm using the Data Flow Task to load data from a flat file into a SQL table and I'm missing rows. And there doesn't see to be any consistent or obvious reason why.
When I use the Bulk Insert Task I import the correct number of rows from the flat file. But when I use the Data Flow task and use a Flat File Source connected to a OLE DB Destination I get about 1/3 the right number of rows. So looking at these loaded tables at the same time I notice that the Data Flow Task method just skips rows sometimes.
Why does this happen??
Dear all,
I built a package to transform data from flatfile into temp table. Then execute a stored procedure to tranform from the temp table into the real table. Since the real table have primary keys so it goes failed when there're duplicate rows from temp table. I let the temp table has no primary key. If I had to check the temp table for duplicate rows it would be using cursor through the data and the package will get slow. Is there task in SSIS to identify the duplicate data and eliminate it without using cursor ?
Thanks in advance,
Best regards,
Hery
The source is a flat file with a column where dates are stored as: 07/12/2006 11:35am. In some cases the column is blank.
I need to import this into a table with a datetime column. In the data flow task, I get the error that conversion b/w String and DB_Timestamp is not allowed. First question is why does SSIS think its a DB_Timestamp column? Shouldnt it be DB_Date or DB_Time. Anyway, when I add a Data Conversion Task in the Data Flow, and cast to the source column to either DB_TimeStamp, DB_Date or DB_Time I get an error.
Please help. What am I doing wrong.
Asim.
Hi,
The further i get with doing my current SSIS package the more i am starting to wonder about best practices and performance.
My current package loops through CSV files in a specified location and extracts events from these files. Each file contains multiple events which are a mixture of different types. Depending on the event there are a different number of comma seperated values. In the package i firstly set each event to one column seperated by a comma delimeter. I then create an array for the event which is split by the delimeter. In a script i weed out all elements of the array that are common to all events and set the remaining events to another array. After some processing i come to my conditional split transformation which splits the processing of each event based on the EventID. This is where i'm having doubts on whether i have approched the package correctly. There are approximately 60 different events so each one of these has a seperate pipeline to process the remaining parameters in the array and output them to the destination table. The destination table is differnet for each ID. Is it viable to have this amount conditions and paths when creating the pacakge and is this likely to have any detrimental effect on performance. Is there possibly another way that i could approach this problem?
Many thanks, i hope that made sense.
Grant
Is there a way to get multiple rows of data to show in 1 row of results?
I have a Data Table (ID, Name, Date, etc), Facility Table (ID, Name) and FacilityKey Table (Data ID and Facility ID). The Data table has a 1 to many relationship with the FacilityKey table.
I want to return the Data ID and each Facility Name associated with that Data ID to display in a DataGrid (preferably each Facility Name in the same cell on the grid too), but am stumped on how to get teh query to work (or where to look in the SQL documentation for something like this).
Thanks!
I am stuck. I have some vars being passed to an aspx page that I need to dump into a db table in multiple rows, how do I do it? I am going into a SQL database using VS.Net 2003 here's the format that the vars come in the page as: UserID = 46 k12SessionArray0interaction_id = Interaction_01 k12SessionArray0correct_response = d k12SessionArray0student_response = d k12SessionArray0result = C k12SessionArray0latency = 00:00:02 k12SessionArray1interaction_id = Interaction_02 k12SessionArray1correct_response = c k12SessionArray1student_response = c k12SessionArray1result = C k12SessionArray1latency = 00:00:02 k12SessionArray2interaction_id = Interaction_03 k12SessionArray2correct_response = a k12SessionArray2student_response = a k12SessionArray2result = C k12SessionArray2latency = 00:00:03 now here's the format of the database AnswerID | UserID | InteractionID | CorrectResponse | StudentResponse | QResult | Latency How do I insert the data to have it be mulitiple rows like: 1 | 46 | Interaction_01 | d | d | C | 00:00:02 2 | 46 | Interaction_02 | c | c | C | 00:00:02 3 | 46 | Interaction_03 | a | a | C | 00:00:03
View 4 Replies View RelatedI would like to display data from one column on multiple rows in one row.
Example:
Name Pet
David Dog
Dawn Dog
Dawn Cat
Pete Mouse
Pete Cat
Pete Dog
I would like the result to do the following:
David Dog
Dawn Dog Cat
Pete Dog Cat Mouse
I will not know the row values ahead of time.
Does anyone have a routine that takes a row of data from database, duplicates/triplicates it, appends some information to it and writes it out as 2/3 CSV rows.
Basically I need to do the following.
Selected from database:
Row1 Col1 Col2 Col3
Output:
Row1 Col1, Col2, Col3, abc
Row1 Col1, Col2, Col3, def
Row1 Col1, Col2, Col3, ghi
Thank you
I am running a query to pull data from 2 tables. However multiple data elements could be attached to one unique ID which when I run the query it repeats causing the entire data set to give inaccurate numbers. How to achieve this:
xxx.001A3264
xxx.001A3685
xxx.002A3261
xxx.002A3685
I would like my results to look like this:
xxx.001A3264 & A3685
xxx.002A3261 & A3685
Here's my tables:
Students
-----------------------
StudentID | StudentName
-----------------------
StudentClasses
-----------------------
StudentID | ClassName
-----------------------
I'm trying to put data into a gridview in ASP.NET 2.0 like this:
Student | Classes
-----------------
Name1 | ClassName1 ClassName2 ClassName3
Name2 | ClassName1
Name3 | ClassName1 ClassName2
I just need to retrieve names of each class that a student is taking, then print them out one after another.
Hi, I am new to to the usage of sql server.I have data in the below mentioned format in table called stock_transaction.
stocknumber transtype transsubtype balance
s01 in cust 100
s01 out cust 200
s01 in deal 300
s01 out cust 100
s02 in deal 200
s02 out cust 300
s02 in cust 100
s02 out cust 200
s02 in cust 300
I want to generate a report which has the sum of balances of each stock number that belong to a particular trans group like
(in,cust) (out,cust),(in,deal) as below where (in,cust) (out,cust),(in,deal) are temporary aliases only for displaying as shown below
stocknumber in,deal out,cust in,cust
s01 300 300 100
s02 200 500 400
I am using case statements, I am able to retrieve the data when selecting of single trans group like(in,cust) or (out,cust) by giving its condition but was unable to select all the details of a particular stock number as a single record .
I have a table that has values as follows:PersonID Degree55 MD55 Phd55 RN60 MD60 PhdI need a create a query that will give me output like this:PersonID Degree55 MD, Phd, RN60 MD, PhdAny ideas
View 16 Replies View RelatedHi all..
First of all Thanks for all the help, I received over the years from MSDN..
Here is my new problem...
I have a SQL table like following table..
State
City
StartDt
EndDt
1
AK
ANCHORAGE
4/1/2007
12/31/2049
2
AK
ANCHORAGE
4/1/2007
12/31/2049
3
AK
ANCHORAGE
5/1/2006
3/31/2007
4
AK
ANCHORAGE
5/1/2006
3/31/2007
5
AK
ANCHORAGE
6/1/2004
4/30/2006
6
AK
ANCHORAGE
6/1/2004
4/30/2006
7
AK
COLDFOOT
10/1/2006
12/31/2049
8
AK
COLDFOOT
10/1/1999
12/31/2049
Now here is what I want to do€¦
1> Sort the table based on Start Date (the picture shown is already sorted..) for example first 6 rows for AK - Anchorage
2> select the rows with same city (rows 1-6)
3> Select the rows with distinct start date (rows 1-3-5)
4> Change the End Date of the second selected row (row 3 in this case) to I day below the start date of 1 selected row. (4/1/2007 €“ 1 day = 3/31/2007)
5> proceed till end of selected rows.. 1-3-5
6> do the same thing for rows 2 and 4.
7> follow the same procedure for rest of the file.
The selected file should look like this when done..
State
City
StartDt
EndDt
1
AK
ANCHORAGE
4/1/2007
12/31/2049
2
AK
ANCHORAGE
4/1/2007
12/31/2049
3
AK
ANCHORAGE
5/1/2006
3/31/2007
4
AK
ANCHORAGE
5/1/2006
3/31/2007
5
AK
ANCHORAGE
6/1/2004
4/30/2006
6
AK
ANCHORAGE
6/1/2004
4/30/2006
7
AK
COLDFOOT
10/1/2006
12/31/2049
8
AK
COLDFOOT
10/1/1999
9/30/2006
Is there way to do this in SSIS? any recommened appprach>?
Any help with this is highly appreciated..
Thank You..
I have implemented a single lookup and would like to know the optimal approach to implement multiple lookups within a single €œdata flow task€? i.e. my question was if I had to look up multiple reference tables to obtain surrogate keys. I am oversimplifying for illustration purposes€¦
Source Table
Destination Table
Customer
Customer
Customer Name
City
State
Name Key
City Key
State Key
ABC
Los Angeles
CA
1
2
1
MNO
Boston
MA
2
1
2
Reference Tables
Customer Name
Customer City
Customer State
PK Key
Customer Name
PK Key
City
PK Key
State
1
ABC
1
Boston
1
CA
2
MNO
2
Los Angeles
2
MA
OK here's my question. I want to retrieve from my database employee table all those employees with the name eg. Smith and display them in a list. Can anyone give me any pointers please. I'm using VB 2005 Express Edition. So far this is what I have but it only seems to return 1 row when I know there are more than one entries with the name I am inputting
Private Sub Button1_Click(ByVal sender As System.Object, ByVal e As System.EventArgs) Handles Button1.Click
Dim searchString As String
searchString = Me.SearchStringBox.Text
Try
Dim filter As String
filter = "LastName LIKE '" & searchString & "'"
Dim search() As System.Data.DataRow
search = myCDDataSEt.ClientData.Select(filter)
If search.Length > 0 Then
'no code as yet
Else
MessageBox.Show("The client " & searchString & "is not in the database")
End If
Catch ex As Exception
MessageBox.Show(ex.Message)
End Try
End Sub
When quering a table with given criteria, For ex:
select notes, jobid, caller from contact where status in (6) and jobid = 173
I am getting this:
This job will be posted to Monster for 2 weeks. 173 906
Waiting for full budget approval 173 906
TUrns out we're uppin 173 906
What should I do so that these three columns for the same jobid from the same caller appears in only one column, either separated by a comma or semicolon?
Please HELP!!!!!
My goal is to run a bunch of select statements from different tables in one database and have them all insert to the same columns/table in the new database. Do I need a new data source for each statement, or is there a way to run all the statements in one set seeing as they all have the same destination. I keep receiving the SQL statement improperly ended error when trying.
View 5 Replies View Related