Data Source Problem Within Package
Apr 3, 2008
Hi, experts here,
Please shed me light on this weird problem I have struggled the whole day with...
I created a new sql data source , but each time when I reload teh packages it gives me the erros saying: cant not find the connection and it says log in failed for the user(the username assigned for access to that SQL server database source)? But what happened was each time I have to open up the connection from the connection manager to refresh it? But still when I reloads it the same problem happened for the whole package project.
I have created the enrironment variable for that data source first, rebooted the computer, add the new configuration to the SSIS packages by SSIS Configuration wizard, and then create the configuration file for it. I think that is the steps to produce it. Why I still got the same problem?
I am looking forward to hearing from you for your help and thank you very much.
Best regards,
Yours sincerely,
View 4 Replies
ADVERTISEMENT
Sep 28, 2005
I'm reading data from sets of CSV source files with " text qualifiers. Most of the data is good, but I do run into some bad data that doesn't seem to get handled by redirecting rows. The type of data that is killing me is this:
View 4 Replies
View Related
Dec 14, 2007
hi,
I created a SSIS package. It imports data from a flat file and then transfer to different data types and load it into destination table. I use look up transformation. Actually before I created final table, I created another intermediate data table for references.
Now I get a new source file once in a month. Then I'm supposed to connect new file and run the package. only difference in new source file is the data not data type. But when I connect the new flat file, package does not work. first one and fifth one are red when I run the package.
Can anyone help me to fix this?
Thanks
p/s;
I get the following error messages in execution result page.
[Lookup 5 [541]] Error: Row yielded no match during lookup.
[Lookup 5 [541]] Error: SSIS Error Code DTS_E_INDUCEDTRANSFORMFAILUREONERROR. The "component "Lookup 5" (541)" failed because error code 0xC020901E occurred, and the error row disposition on "output "Lookup Output" (543)" specifies failure on error. An error occurred on the specified object of the specified component. There may be error messages posted before this with more information about the failure.
[DTS.Pipeline] Error: SSIS Error Code DTS_E_PROCESSINPUTFAILED. The ProcessInput method on component "Lookup 5" (541) failed with error code 0xC0209029. The identified component returned an error from the ProcessInput method. The error is specific to the component, but the error is fatal and will cause the Data Flow task to stop running. There may be error messages posted before this with more information about the failure.
[DTS.Pipeline] Error: SSIS Error Code DTS_E_THREADFAILED. Thread "WorkThread0" has exited with error code 0xC0209029. There may be error messages posted before this with more information on why the thread has exited.
[Flat File Source [1]] Error: The attempt to add a row to the Data Flow task buffer failed with error code 0xC0047020.
[DTS.Pipeline] Error: SSIS Error Code DTS_E_PRIMEOUTPUTFAILED. The PrimeOutput method on component "Flat File Source" (1) returned error code 0xC02020C4. The component returned a failure code when the pipeline engine called PrimeOutput(). The meaning of the failure code is defined by the component, but the error is fatal and the pipeline stopped executing. There may be error messages posted before this with more information about the failure.
[DTS.Pipeline] Error: SSIS Error Code DTS_E_THREADFAILED. Thread "SourceThread0" has exited with error code 0xC0047038. There may be error messages posted before this with more information on why the thread has exited.
View 1 Replies
View Related
Jul 26, 2006
Hi all...
I'm creating a SSIS in the designer view of SQL Server BI Dev. Studio (SQL Server 2005)
I need to import a whole table from MS Access into my local SQL Server.(this task will be performed weekly, so once working I'll schedule a job for it)
I've created a 'FILE' connection to MS Access in the 'Connection Managers'.
When I'm on the 'Data Flow' tab I can't find a Data Flow Item to use as a MS Access connection.
(available on the 'Data Flow Sources' are only: DataReader, Excel, Flat File, OLE DB, Raw File and XML Sources)
What am I doing wrong/missing?
Thanks for your help.
View 4 Replies
View Related
Feb 12, 2008
Hi All,
It's been a while since I post here. Anyway, I'm trying to call a SSIS package as my data source for SQL reporting service but I keep getting the error "Cannot create a connection to data source 'DsSSIS'.
My DsSSIS consists of the following in the connection string.
="/file c:FarmBillTesting.dtsx /Set Package.Variables[User::FilterValue].Properties[Value];" & Parameters!FilterValue.Value.ToString()
I have tried everything that I know to make this work but I have been able to do so. Any help from the group would be great.
Thanks
Ham
View 11 Replies
View Related
Jun 8, 2006
Hi All,
Another requirement has cropped up with regard to picking up connection settings for data sources from an external File.
My source and target are both in SQL Server. What i need is that if my source or target changes I should just change my external file and same should reflect in my package.
How can I accomplish it? Please suggest some solution.
Thanks in advance.
Regards,
Aman Anand
View 2 Replies
View Related
Dec 15, 2005
hello ,
I want to download data from an AS/400 to a SQL 2005 Database.
Within Sql server 2000 it was possible to do more than 1 transformation with just 1 source connenction and 1 destination.
In SSIS I have created:
- new solution
- data source
- Data source viewer ( I made named queries to format the data as i want it to be in Sql)
Although it is possible to view the named query data it does not seem to be possible to import the data in the data viewer into my sql 2005 database. (For each dataflow I have to define each query again)
I have added the data source in the connection manager.
Also I am searching to import more than 1 file in 1 package !
I can use however a Dts-2000 package but why then use SQL server 2005
Hope somebody can help me
Regard,
Ronny
View 7 Replies
View Related
Jun 19, 2015
I'm using a shared data source to connect an Oracle server in my packages. After changing the database user password in the shared data source, I noticed the package concerned would fail with the following description.
Source: "OraOLEDB"Â Hresult: 0x80004005Â Description: "ORA-01017: invalid username/password; logon denied".
Is there a way to ensure the packages will use the latest information in the shared data source? I did do a Rebuild before executing the packages.
View 5 Replies
View Related
Sep 2, 2015
1 How to get the desired output colums into Excel file without having 'copy of column/unwanted columns' in destination file.
2. How to override the existing file in excel destination.
View 2 Replies
View Related
Mar 13, 2008
hi ,
i am trying for a drill through report (rdlc)
ihave written the following code in drill through event of reportviewer, whenever i click on the first report iam getting the error like
An error has occurred during report processing.
A data source instance has no
t been supplied for the data source "DetailDS_get_orderdetail".
the code is
using System;
using System.Data;
using System.Data.SqlClient;
using System.Configuration;
using System.Collections;
using System.Web;
using System.Web.Security;
using System.Web.UI;
using System.Web.UI.WebControls;
using System.Web.UI.WebControls.WebParts;
using System.Web.UI.HtmlControls;
//using Microsoft.ApplicationBlocks.Data;
using Microsoft.Reporting.WebForms;
using DAC;
public partial class _Default : System.Web.UI.Page
{
protected void Page_Load(object sender, EventArgs e)
{
ReportViewer1.Visible = false;
}
protected void Button1_Click(object sender, EventArgs e)
{
DAC.clsReportsWoman obj = new clsReportsWoman();
DataSet ds = new DataSet();
ds = obj.get_order();
ReportViewer1.LocalReport.DataSources.Clear();
ReportDataSource reds = new ReportDataSource("DataSet1_get_order", ds.Tables[0]);
ReportViewer1.LocalReport.DataSources.Add(reds);
ReportViewer1.LocalReport.ReportPath = "C:/Documents and Settings/km63096/My Documents/Visual Studio 2005/WebSites/drillthrurep/Report.rdlc";
ReportViewer1.LocalReport.Refresh();
ReportViewer1.Visible = true;
}
protected void ReportViewer1_Drillthrough(object sender, DrillthroughEventArgs e)
{
DAC.clsReportsWoman obj = new clsReportsWoman();
ReportParameterInfoCollection DrillThroughValues =
e.Report.GetParameters();
foreach (ReportParameterInfo d in DrillThroughValues)
{
Label1.Text = d.Values[0].ToString().Trim();
}
LocalReport localreport = (LocalReport)e.Report;
string order_id = Label1.Text;
DataSet ds = new DataSet();
ds = obj.get_orderdetail(order_id);
ReportViewer1.LocalReport.DataSources.Clear();
ReportDataSource reds = new ReportDataSource("DetailDS_get_orderdetail", ds.Tables[0]);
ReportViewer1.LocalReport.DataSources.Add(reds);
ReportViewer1.LocalReport.ReportPath = Server.MapPath(@"Reportlevel1.rdlc");
ReportViewer1.LocalReport.Refresh();
}
}
the code in method get_orderdetail(order_id) is
public DataSet get_orderdetail(string order_id)
{
SqlCommand cmd = new SqlCommand();
DataSet ds = new DataSet();
cmd.Parameters.Add("@order_id", SqlDbType.VarChar, 50);
cmd.Parameters["@order_id"].Value = order_id;
ds = SQLHelper.ExecuteAdapter(cmd, CommandType.StoredProcedure, "dbo.get_orderdetail");
return (ds);
}pls help me.
View 1 Replies
View Related
Feb 2, 2008
,
Hi
In this code how can I create a new data source and new data source view and model and structure that it run dynamic.
In this code I have a lot of errors, that they are about server and database don€™t have in current code,
In this code, first I should definition server or no?
Database dbNew = new Database (databaseName,
Utils.GetSyntacticallyValidID(databaseName, typeof(Database)));
srv.Databases.Add(dbNew);
dbNew.Update(true);
***********************************************************
How can I create data source and data source view and model and structure?
Please say code of that, and guide me.
databasename and srv is unknown.
Do I add other reference with analysis services?
Please explain about these codes:
************************************************************************
1)
RelationalDataSource dsNew = new RelationalDataSource(
datasourceName,
Utils.GetSyntacticallyValidID(
datasourceName,
typeof(RelationalDataSource)));
db.DataSources.Add(dsNew);
dsNew.ConnectionString = connectionString;
dsNew.Update();
2)
RelationalDataSourceView rdsv;
rdsv = db.DataSourceViews.Add(
datasourceviewName,
Utils.GetSyntacticallyValidID(
datasourceviewName,
typeof(RelationalDataSourceView)));
rdsv.DataSourceID = ds.ID
***************************************************************
3)
OleDbConnection cn = new OleDbConnection(ds.ConnectionString);
OleDbCommand cmd = new OleDbCommand(
"SELECT * FROM [" + tableName + "] WHERE 0=1", cn);
OleDbDataAdapter ad = new OleDbDataAdapter(cmd);
DataSet dss = new DataSet();
ad.FillSchema(dss, SchemaType.Source);
*************************************************************
4)
// Make sure we have the name we thought
dss.Tables[0].TableName = tableName;
// Clone here - the original DataTable already belongs to a DataSet
rdsv.Schema.Tables.Add(dss.Tables[tableName].Clone());
rdsv.Update();
5)
MiningStructure ms = db.MiningStructures.Add(miningstructureName, Utils.GetSyntacticallyValidID(miningstructureName,
typeof(MiningStructure)));
ms.Source = new DataSourceViewBinding(dsv.ID);
ms.CaseTableName = "Customer";
Add columns:
ScalarMiningStructureColumn smsc;
// From table "Customer" we will add a couple of columns
// CustomerID - key
smsc = new ScalarMiningStructureColumn("Customer ID",
Utils.GetSyntacticallyValidID("Customer ID", typeof(ScalarMiningStructureColumn)));
smsc.IsKey = true;
smsc.Content = "Key";
smsc.KeyColumns.Add("Customer", "customer_id", OleDbType.Integer);
ms.Columns.Add(smsc);
*******************************************
6)
MiningModel mm = ms.MiningModels.Add(miningmodelName,
Utils.GetSyntacticallyValidID(miningmodelName,
typeof(MiningModel)));
mm.Algorithm = "Microsoft_Decision_Trees";
mm.Parameters.Add("COMPLEXITY_PENALTY", 0.3);
MiningModelColumn mc = new MiningModelColumn("Customer ID",
Utils.GetSyntacticallyValidID("CustomerID",
typeof(MiningModelColumn)));
mc.SourceColumnID = ms.Columns["Customer ID"].ID;
mc.Usage = "Key";
mm.Columns.Add(mc);
mm.Update();
Please exactly say, whatever I want
Thanks a lot for your answer
Please don€™t move this question because I don€™t know where I should write this.
View 1 Replies
View Related
Mar 2, 2007
I have set up a new connection as a connection from data source, but I cannot see how to use this connection to create my Data Flow Source. I have tried using an OLE DB connection, but this is painfully slow! The process of loading 10,000 rows takes 14 - 15 minutes. The same process in Access using SQL on a linked table via DSN takes 45 seconds.
Have I missed something in my set up of the OLE DB source / connection? Will a DSN source be faster?
Thanks in advance
ADG
View 2 Replies
View Related
Dec 13, 2007
Hi,
I am running dts in Sql Server 2005 management studio from Management, Legacy and data Transformation Services.
Once the dts has run, I get this error message "Error Source : Microsoft Data Transformation Services (DTS) Package Error Description : Error accessing Windows Event Log."
Please help me
thanks in advance
Srinivas
View 1 Replies
View Related
May 8, 2007
hi everybody,
i want to create data source and data source view for data mining, with using C Sharp.
i have create data source and data source view and export to XML file, but when i change to another computer, run those XML file, it return error, when i run statement to create and biuld mining model, what can i change on xml or how to run XML on another computer sucessfully,
and have i build data source and data source view, how to do it.?
thanks for you helps
View 1 Replies
View Related
Dec 11, 2007
Today I was making a few reports.
When I tested the reports in Visual Studio, they worked great: I got the expected result.
But when I deployed the reports to our reportserver the problem started.
When I click on the directory in which my reports are deployed, I got my 4 reports.
Till now everything worked correct.
But when I click on a report to view the results it went wrong.
I got an error:
"Cannot create a connection to data source 'Live'"
(Live is the name of our data source).
We are using the Windows Logons and I am sure that I have all the rights on the server, I gave myself 'sysadmin' rights, so it should work.
I also have tried it with all the roles assigned on my account, but then it still won't work.
When I modify the data source, and set it to another server en database it works.
The datasource 'Live' exists on a x64 MsSQL server, en the other datasource is on a x86 MsSQL server.
Maybe that is the problem?
Can someone tell me what is wrong?
View 1 Replies
View Related
May 20, 2007
Hi there,
I'm trying to build a report for Windows Forms (C#) using .rdlc files.
But every time I run it, I get this error message. I've followed the step-by-step from MSDN instructions... but it doesn't work!
Could anyone help me?!
Tks a lot!
Luis Antonio - Brazil
View 1 Replies
View Related
Dec 13, 2007
I was trying to load data using SSIS, Data Flow Task, OLE DB Source, source was a view to a OLE DB Destination (SQL Server). This view returns 420,591 rows from Query Analyzer in 21 seconds. Row length is 925. When I try to executed the Data Flow Task from SSIS, I had to stop the process after 30 minutes, because only 2,000 rows had been retrieved. I modified the view to retun top 440, 000 and reran. This time all 420, 591 rows were retrieved and written in 22 seconds. Next, I tried to use a TOP 100 Percent. Again, only 2,000 rows were return after 30 minutes. TempDB is on a separate SAN Raid group with 200 gig free, Databases on a separate drive with 200 gig free. Server has 13 gig of memory and no other processes were executing.
The only way I could populate the table was by using an Execute SQL Task and hard code an Insert into table selecting data from the view (35 seconds) from SSIS.
Have anyone else experience this or a similar issue? Anyone have a solutionexplanation?
View 13 Replies
View Related
Sep 3, 2007
The report having SSIS package as source works fine on my local 32 bit windows xp machine from Report Manager. But same doesn't work from 64bit windows 2003 machine... fails with below error... what could be an issue?
An error has occurred during report processing.
Cannot create a connection to data source 'DataSource1'.
is not a valid Win32 application. (Exception from HRESULT: 0x800700C1)
The same works fine when previewed from visual studio on 64 bit machine.
Thanks
Mahesh
View 6 Replies
View Related
Sep 20, 2000
Is there a way to print the source code from the local package. I know you can go in the source and cut and paste it into a word document. I was wondering if there was a way to do it when you are in designing the package so that it would print all the source codes of SQL statments/queries.
View 1 Replies
View Related
Sep 4, 2006
I have a peculiar problem with a database.
I need to import data from text files where one column matches a value in a table that's already on the database. I cannot even fathom how to do this without pulling the entire 1GB file onto the database and simply deleting data that doesn't match the criteria. While this would work, I'm sure there's a more efficient way to do it! Can anyone give me some pointers? I'm not exactly a DTS expert.
Thank you.
View 4 Replies
View Related
Jan 31, 2013
is it possible to delete a source file(*.txt) when a SSIS package is done with it?
View 3 Replies
View Related
Oct 20, 2007
I have created an SSIS package that is designed to move data from SQL Server 2000 to an Access db. I have set the package up to accept four parameters. They are:
the name of the SQL Server Database, which is used in an expression to provide the source connection manager connection string;
the full path to the Access db destination database which is used like #1 above.
the SELECT statement used in an OLE DB Source object to get the data from the source table
the table name which is used by an OLE DB Destination object.
I know that the source and destination tables have exactly the same structure and do not require a transformation.
In order to change variables 3 and 4 from above and have it work, I go through the following steps:
I change the variables to appropriate values.
Go to the Advanced Editor for the OLE DB Source object and click on "Refresh". This produces an error in the OLE DB Destination object that is something like "Validation error. Data Flow Task: DTS.Pipeline: input column "strRECTYPESUFFIX" (301) has lineage ID 17 that was not previously used in the Data Flow task.
Go to the Advanced Editor for the OLE DB Destination which brings up the "Restore Invalid Column Reference Editor". I mark all the columns that show up with the option to <Delete invalid column reference> and click OK
I then reopen the Advanced Editor for the OLE DB Destination, go to the 'Column Mappings' tab click 'Refresh', then in the upper pane where the input and output columns list appear I right click and choose "Map Items by Matching Names"
At this point I no longer have the error and the package will execute without any problems.
I am doing this so that I can load the SSIS package in VB.NET (2.0) so that I can then set these variables programmatically and then execute the package. The problem is that this actually performs steps 1 and 4 above. 2 and 3 are left out and the package fails miserably.
I have found some information that would be helpful if I could get my hands on the appropriate object. I realize that the data flow component would return VS_NEEDSNEWMETADATA from the Validate method, and that could be repaired with the ReinitializeMetaData method of the data flow component ( I assume that is the object to be using in this case). But I do not know how to grab the "Data Flow Component" as an object based upon the "Package" object I have loaded so that I can check if it is valid and manipulate it if necessary.
Thank you in advance for your help.
View 4 Replies
View Related
Apr 9, 2006
Hi
I have created an SSIS Package which provides Data to a DataReaderDestination. Next I have uncommented SSIS support in rsreportserver.config and rsreportdesigner.config
After that I have set up a shared Datasource in ReportServer and created a Report using that DS of type SSIS.
/FILE D:ETLReportingDataService.dtsx
When trying to see the report using http://localhost/reports I get a message that tells me that the package fails to execute. It does so well when debugging, so my guess is that there is some security issue.
It also does not work in preview dialog in VS. The error message there is "Cannot read the next data row for the data set dsSSIS. Object refernece not set to an instance of an obj.
I haved tried several sec. config-scenarios for the shared datasource. No change
I am using sql 2005 std, march sp1 ctp
Does anyone have a clue what could be the cause of my problem
Thaks in Advance
Alex
View 2 Replies
View Related
May 14, 2008
Hi
I am using a XML source and an oldedb destination to load an XML file into a database, the XML and corresponding XSD are provided by a different system and I dont have any control on them.
In the data flow I can see all the tables in the schema and I can map the columns, however when I run the package it validates fine, and then completes without going into the execution mode, its all green but doesnt load any data. Its weird and I cannot figure out if it is an XML or XSD problem, any idea?
Thanks
View 5 Replies
View Related
Apr 4, 2006
Hi Guys,
(I have searched this forum extensively, but still can't find the solution to this problem)
Here it is:
I have step in my ETL process that gets facts from another database. Here is how I set it up:
1) I have to package variables called User::startDate and User::endDate of data type datetime
2) Two separate Execute SQL Tasks populate those variables with appropriate dates (this works fine)
3) Then I have a Data Flow Task with OLE DB source that uses a call to a sproc of the form "exec ETL_GetMyData @startDate = ?, @endDate = ?" with parameters mapped accordingly (0 -> User::startDate, 1 -> User::endDate)
When I run this I get an error 0xC0207014: "The SQL command requires a parameter named "@startDate", which is not found in the parameter mapping."
It is true that the sproc in fact requires @startDate and @endDate parameters, so next thing I tried to do is call the sproc the following way: "exec ETL_GetMyData @startDate = ?, @endDate = ?"
To no avail. It gives me the same error. Incidentally, when I hard code both dates like "exec ETL_GetMyData '2006-04-01', '2006-04-02'" everything works well.
Also, I want to mention that in the first two cases, I get an error right in the editor. When I try to parse the statement it gives me "Invalid parameter number" message.
This has been such a pain in my neck. I've waisted the whole day trying to monkey with the various parts of package/statements to get this to work and it still doesn't. I dont' want to say anything about Integration Services design right now, but you probably know what I'm thinking...
View 23 Replies
View Related
Aug 16, 2006
Trying to set up a tranform task between a mysql db using and ADO.NET connection and sql server.
My query to pull from the mysql db is something like "select x,y,z from table where last_updated" > @User::LastUpdated. This command is set up as an expression for the Data Flow Task and is the value for the [DataReader Source].[SqlCommand]
I have two questions.
Why does the package attempt a query against the mysql database all the time?
And Why is the query attempting to pull the entire table instead of having any regards for my where clause?
I've even added where last_updated > greatest('2006-08-15', '" + @User::LastUpdated to attempt to get it a where clause even when the parameter isn't set yet.
What is the trick? This is not feasible when pulling from multi-million row tables.
View 2 Replies
View Related
Dec 28, 2006
Hi guys..
I had created a Integration services project within my local system.All my packages are running fine.I added it to source control.Now i added this project from source control to another machine.It is failing to run...The path it is trying to execute is the location of the where i actually created my project.
How can i make it work.let me know
View 8 Replies
View Related
Nov 2, 2006
Learning how to use SSIS...
I have a data flow that uses an OLEDB Source Component to read data from a table. The data access mode is SQL Command. The SQL Command is:
select lpartid, iCallNum, sql_uid_stamp
from call where sql_uid_stamp not in (select sql_uid_stamp from import_callcompare)
I wanted to add additional clauses to the where clause.
The problem is that I want to add to this SQL Command the ability to have it use a package variable that at the time of the package execution uses the variable value.
The package variable is called [User::Date_BeginningYesterday]
select lpartid, iCallNum, sql_uid_stamp
from call where sql_uid_stamp not in (select sql_uid_stamp from import_callcompare) and record_modified < [User::Date_BeginningYesterday]
I have looked at various forum message and been through the BOL but seem to missing something to make this work properly.
http://msdn2.microsoft.com/en-us/library/ms139904.aspx
The article, is the closest I have (what I belive) come to finding a solution. I am sure the solution is so easy that it is staring me in the face and I just don't see it. Thank you for your assistance.
...cordell...
View 4 Replies
View Related
Oct 24, 2007
Hi All,
I created a SSIS package to extract data from a flat file source and load them into a table in a data base. After I created the package i checked it in to source control(perforce).
But the problem is once a month new flat source file comes and data should be updated.
Once the new flat file comes, is there anyway that SSIS package can identify the path of the flat file and execute the package automatically? In Flat file source only the data will be changed. Not location or data type or anything.
Can i use parameters to do that?
Thanks
View 6 Replies
View Related
Sep 22, 2015
I want to design an SSIS package that loads data from files into SQL Server and I want to automate the process. My major issue is that the source file doesnt come in the same format. Some times I comes in either .csv , .xls , .txt or even .rpt file format. Is there a way I can write a code that checks through my folder and based on the available format on the folder it loads the value in ssis.
View 2 Replies
View Related
Sep 6, 2007
Hi everyone,
There is a small problem encountered while creating a package in sql
server 2005.
Actually i am using a flat file which has 820 rows and 2 columns which
are seperated by line feed(for ROW) and tab(for COLUMN).after
importing i found that ther are only 800 rows imported into the table.
Ather verifying the input file i found out that there are some null
values in the second column so there is no line feed for those
values.
Can anyone please help me how to give multiple delimiters for the same
input flat file.
View 9 Replies
View Related
Jul 30, 2015
I am in between of creating a dynamic SSSIS package which will run for multiple zones having different source connection.My source is in Oracle.I am having 3 DFT with the 3 different source tables.I want to create a package with above DFT dynamically so that my single package can run for the entire zone with dynamically source connection change.I have created a Master table which stores the zone source connection string and zone name. I have 2 different connection.so if in future any new zones come so only newly zone details need to be add in master table without opening the package.
View 3 Replies
View Related
Oct 6, 2015
How can I get table name and schema names of the source and destination in ssis package to insert into audit table....??
View 3 Replies
View Related
