Data Type Conversion .. Varchar To GUID
Jul 31, 2006Hi,
I have a parameter @name varchar(50)
but the table has a field with datatype GUID
how I can convert varchar to guid before insertion...
Thanks
Hi,
I have a parameter @name varchar(50)
but the table has a field with datatype GUID
how I can convert varchar to guid before insertion...
Thanks
Table:Student
Name nvarchar(1000)
Status int
In the stored procedure - I have got a string which contains comma separated Status Values such as
DECLARE @validStatus = '1000,1001,1002'
I want to return the count of students having the status code as in @validStatus
SELECT count(1) FROM Student WHERE Status in (@validStatus)
But the above statement is erroring out with
Conversion failed when converting the varchar value '1000,1001,1002' to data type int.
Any help/suggestion appreciated.
Thanks,
Loonysan
Hi guys,
My query was working fine until I added the yellow highlighted areas below.
Basically what I'm doing with this is getting the lowest open purchase order number (docnum) and its matching docduedate.
Now when I run it I get
Conversion failed when converting the varchar value 'po_num' to data type int.
Any ideas? Thanks!
SELECT t3.product ,
t7.itemname ,
t2.u_vlgx_plc,
t3.shorted ,
t4.onhand ,
MIN(
CASE
WHEN t8.linestatus = 'O'
THEN t9.docnum
ELSE NULL
END) po_num,
t10.docduedate
FROM
(SELECT t0.product product ,
SUM(
CASE
WHEN t0.qty_topick <> t0.qty_picked
THEN t0.qty_topick - t0.qty_picked
ELSE 0
END) shorted
FROM rbeacon.dbo.shipline2 t0
INNER JOIN rbeacon.dbo.shiphist t1
ON t0.packslip = t1.packslip
WHERE t1.date_upld = CONVERT(VARCHAR(10), GETDATE()-1, 101)
GROUP BY t0.product
) t3
INNER JOIN comparison.dbo.vlgxplc t2
ON t2.itemcode = t3.product COLLATE Latin1_General_CI_AS
LEFT JOIN
(SELECT t0.product AS product,
SUM(t0.quantity) AS onhand
FROM rbeacon.dbo.binlocat t0
GROUP BY t0.product
) t4
ON t3.product = t4.product
INNER JOIN wbau.dbo.oitm t5
ON t3.product = t5.itemcode COLLATE SQL_Latin1_General_CP850_CI_AS
LEFT JOIN wbau.dbo.ocrd t6
ON t5.cardcode = t6.cardcode
INNER JOIN wbau.dbo.oitm t7
ON t3.product = t7.itemcode COLLATE SQL_Latin1_General_CP850_CI_AS
LEFT JOIN wbau.dbo.por1 t8
ON t3.product = t8.itemcode COLLATE SQL_Latin1_General_CP850_CI_AS
LEFT JOIN wbau.dbo.opor t9
ON t8.docentry = t9.docentry
LEFT JOIN comparison.dbo.podatetest('po_num') t10
ON t10.docnum = t9.docnum
WHERE t3.shorted <> 0
GROUP BY t3.product ,
t7.itemname ,
t2.u_vlgx_plc,
t3.shorted ,
t4.onhand ,
t6.cardname,
t10.docduedate
ORDER BY t2.u_vlgx_plc,
t6.cardname ,
t3.product
I try to compile your query, and prompt error message in below 'conversion failed when converting the varchar value 'times' to data type int .Error code 245.
select
user_member
, sum(case when trx_date > dateadd(month, -3, getdate()) then 1 else 0 end) + ' times'
, max(case when trx_date < dateadd(month, -3, getdate()) then trx_date else NULL end)
from trx_hdr
group by user_member
CASE WHEN NULLIF(NHSNo2, '') IS NULL THEN 1
WHEN NULLIF(Surname, '') IS NULL THEN 2
WHEN NULLIF(Forename, '') IS NULL THEN 3
WHEN NULLIF(DOB, '') IS NULL OR DOB < '01/01/1900' THEN 4
WHEN NULLIF(AddressLine1, '') IS NULL THEN 5
[code]...
The above code worth great but ideally instead of returning a number Id like to return text for example
1 = NHS
2= SUR
3=FOR
4=DOB
5=ADD
6=PCO
7=GPN
8=PCZ
9=GPD
10=CCG
i am trying to run to get a list of computers from a table based on the available free space. I'd like to group them based on the available space, for example, up to 1 GB, 1-2 GB, etc.Â
With Disk_Space (ResourceID, ComputerName, Description, DiskName, VolumeName, FileSystem, Size, FreeSpace)AS
(
SELECT distinct
SYS.ResourceID,
SYS.Name,
LDISK.Description0,
LDISK.DeviceID0,
LDISK.VolumeName0,
LDISK.FileSystem0,
[code]...
However when i run this query, i get an error :Â
Msg 245, Level 16, State 1, Line 1
Conversion failed when converting the varchar value '1GB To 2GB' to data type int.
Hi, I was using a Store Proc and it was working nice ,
Now, I am getting this error as:
Conversion failed when converting the varchar value 'APCCE' to data type int
Is that should make any problem as well
Just want to know ..the help
Thanks
I am doing a Case statement to create a unified field for account type and vendor, in the code below I am receiving the error in the subject, because the account numbers have alpha characters in the string, I need to make them as OTHER if the first 2 left chars are Alpha, I thought how I have ISNUMERIC would do that but I am still getting the error.
I am also including example of how the account_numbers are formatted.
R222209
R222220
R222222
R222212
R221123
F707768
[Code] .....
I am using T-SQL I have a column (ColA)that has datetime format and I simply want to pull the next day but date only into ColB
ColA
3/12/2014 12:00AM
3/19/2014 12:00AM
ColB
3/13/2014
3/20/2014
I have been trying the command below but keep getting the error "Conversion failed when convertint the varchar value '03-03-2014' to data type int."
Convert (varchar(10), "StartDate", 110)+1 as Next Day
I am getting this error when I run the case statement below. I think I have to convert at some point, but not sure where or how.Â
Case when m.dispo = 2 then 'Inactive' else m.value end 'Score'
I have problem to execute query with interval date.
If try this query I don't have problem and the output is correct:
SELECT * FROM dotable
WHERE
dotableDate BETWEEN CONVERT (datetime, '01/01/2015', 121)
AND CONVERT (datetime, '09/01/2015', 121);Instead if try this I have error:
SELECT * FROM dotable
WHERE
dotableDate BETWEEN CONVERT (datetime, '25/01/2015', 121)
AND CONVERT (datetime, '28/01/2015', 121);
[Err] 22007 - [SQL Server]The conversion of a varchar data type to a datetime data type resulted in an out-of-range value.
Hello Guys,Have been getting this error(
Implicit conversion from data type ntext to varchar is not allowed. Use the CONVERT function to run this query.
) when running on the live environment but it was fine when run locally. If anyone has similar problem please let me know the fix you have done.
Thank you.
I am trying to write a query that give me how many items were filed per year.
This is the error:
Conversion failed when converting the varchar value 'YEAR(1999)' to data type int.
Here is the query I am using:
SELECT COUNT (*),
CASE
WHEN ChargesFiledDate > 20141231 THEN 'YEAR (2015)'
WHEN ChargesFiledDate > 20131231 THEN 'YEAR (2014)'
WHEN ChargesFiledDate > 20121231 THEN 'YEAR (2013)'
ELSE YEAR (0000)
[Code] ...
And got the same error. Â I know there is probably a better way to get this data (being that I need it from 2007 to present), but don't know how to write it.
this is in form VB
Private Sub orderidtxbx_Click(ByVal sender As Object, ByVal e As System.EventArgs) Handles orderidtxbx.Click
sqlconnection = New SqlConnection("Data Source= xxxx;Initial Catalog = xxxx; user ID = sa; Password = xxxxx;")
sqlcommand = New SqlCommand("select Customer.LastName, Customer.FirstName from customer where ticket.ticketid ='" & orderidtxbx.Text & "'", sqlconnection)
sqlconnection.Open()
sqldatareader = sqlcommand.ExecuteReader()
ListBox1.Items.Add(sqldatareader.Item("LastName") & " " & sqldatareader.Item("FirstName")
error msg The multi-part identifier "ticket.ticketid" could not be bound
query in sql 2005,I need to make store procedure.
SELECT Itinerary.FlightID, Itinerary.Class, Itinerary.Quantity, Ticket.Date, Flight.FlightNo, Flight.AirLine, Flight.DepartureDate, Flight.ArrivalDate,
Flight.DepartureTime, Flight.ArrivalTime, Flight.Price, Departure.DepartureLocation, Arrival.ArrivalLocation,GST=convert(int,Itinerary. Quantity*0.06*Flight.Price),PST=convert(int,Itiner ary.Quantity*0.07*Flight.Price),TotalPrice=convert (int,(Itinerary.Quantity*0.06*Flight.Price)+(Itine rary.Quantity*0.07*Flight.Price)+Flight.Price)
FROM Flight INNER JOIN
Itinerary ON Flight.FlightID = Itinerary.FlightID INNER JOIN
Ticket ON Itinerary.TicketID = Ticket.TicketID INNER JOIN
Departure ON Flight.DepartureLocationID = Departure.DepartureID INNER JOIN
Arrival ON Flight.ArrivalLocationID = Arrival.ArrivalID
WHERE (Itinerary.ticketid = '@Itinerary.ticketid')
if i change WHERE (Itinerary.ticketid = 1)
it will read the data in the table.
I need to refer that itinerary.ticketid into textbox in form that's why i make like this WHERE (Itinerary.ticketid = '@Itinerary.ticketid') but i don't know what is worng with this.
This error Msg 245, Level 16, State 1, Line 2
Conversion failed when converting the varchar value '@Itinerary.ticketid' to data type int(but my ticketid value already integer not varchar).
Hi all,I have a table called PTRANS with few columns (see create script below).I have created a view on top that this table VwTransaction (See below)I can now run this query without a problem:select * from dbo.VwTransactionwhereAssetNumber = '101001' andTransactionDate <= '7/1/2003'But when I create an index on the PTRANS table using the command below:CREATE INDEX IDX_PTRANS_CHL# ON PTRANS(CHL#)The same query that ran fine before, fails with the error:Server: Msg 242, Level 16, State 3, Line 1The conversion of a char data type to a datetime data type resulted inan out-of-range datetime value.I can run the same query by commeting out the AssetNumber clause and itworks fine. I can also run the query commenting out the TransactionDatecolumn and it works fine. But when I have both the conditions in theWHERE clause, it gives me this error. Dropping the index solves theproblem.Can anyone tell me why an index would cause a query to fail?Thanks a lot in advance,AmirCREATE TABLE [PTRANS] ([CHL#] [varchar] (100) COLLATE SQL_Latin1_General_CP1_CI_AS NULL ,[CHCENT] [numeric](2, 0) NOT NULL ,[CHYYMM] [numeric](4, 0) NOT NULL ,[CHDAY] [numeric](2, 0) NOT NULL ,[CHTC] [char] (2) COLLATE SQL_Latin1_General_CP1_CI_AS NOT NULL) ON [PRIMARY]GOCREATE VIEW dbo.vwTransactionsASSELECT CONVERT(datetime, dbo.udf_AddDashes(REPLICATE('0', 2 -LEN(CHCENT)) + CONVERT(varchar, CHCENT) + REPLICATE('0', 4 -LEN(CHYYMM))+ CONVERT(varchar, CHYYMM) + REPLICATE('0', 2 -LEN(CHDAY)) + CONVERT(varchar, CHDAY)), 20) AS TransactionDate,CHL# AS AssetNumber,CHTC AS TransactionCodeFROM dbo.PTRANSWHERE (CHCENT <> 0) AND (CHTC <> 'RA')*** Sent via Developersdex http://www.developersdex.com ***Don't just participate in USENET...get rewarded for it!
View 1 Replies View RelatedHi Folks,
I am trying to build a Package that selects a list of Uniqueidentifiers by "Execute SQL-Task" and then loops through the ResultSet of the query using ADO.Net Enumerator to do something with this GUID Value, namely deleting all entrys with this PK in a different DataBase.
The main Problem I am facing is that you can´t select the type "GUID" for a user Variable in "Execute SQL-Task". All the Datatypes are there except for GUID!
This leads to the following error:
Error: 0xC001F009 at Package: The type of the value being assigned to variable "User::ImagicID" differs from the current variable type. Variables may not change type during execution. Variable types are strict, except for variables of type Object.
Is this a bug? Or am I doing something terribly wrong?
Best Regards and thanks in advance for your help
Chucker
After testing out the application i write on the local pc. I deploy it to the webserver to test it out. I get this error.
System.Data.SqlClient.SqlException: The conversion of a char data type to a
datetime data type resulted in an out-of-range datetime value.
Notes: all pages that have this error either has a repeater or datagrid which load data when page loading.
At first I thought the problem is with the date, but then I can see
that some other pages that has datagrid ( that has a date field) work
just fine.
anyone having this problem before?? hopefully you guys can help.
Thanks,
Hello experts,
I am trying to create a report including a subreport in VS.2003 Reporting services. The subreport itself runs properly, if I give it a parameter, but when I try to run the main (parent) report, I get the obvious message Subreport could not be shown.
The output windows returns a message:
The value expression used in textbox €˜AccountID€™ returned a data type that is not valid.
The AccountID field is a system.guid. I tried to "cast" it as a text, but I got another error message that the system.guid cannot be explicitly converted.
Does anyone know how to get around this?
Thank you very much.
Ravie.
I am trying to use the Bulk Insert Task to load from a csv file. My final column is a bit that is nullable. My file is an ID column that is int, a date column that is mm/dd/yyy, then 20 columns that are real, and a final column that is bit. I've tried various combinations of codepage and datafiletype on my task component. When I have RAW with Char, I get the error included below. If I change to RAW/Native or codepage 1252, I don't have an issue with the bit; however, errors start generating on the ID and date columns.
I have tried various data type settings on my flat file connection, too. I have tried DT_BOOL and the integer datatypes. Nothing seems to work.
I hope someone can help me work through this.
Thanks in advance,
SK
SSIS package "Package3.dtsx" starting.
Error: 0xC002F304 at Bulk Insert Task, Bulk Insert Task: An error occurred with the following error message: "Cannot fetch a row from OLE DB provider "BULK" for linked server "(null)".The OLE DB provider "BULK" for linked server "(null)" reported an error. The provider did not give any information about the error.The bulk load failed. The column is too long in the data file for row 1, column 24. Verify that the field terminator and row terminator are specified correctly.Bulk load data conversion error (type mismatch or invalid character for the specified codepage) for row 1, column 23 (cancelled).".
Error: 0xC002F304 at Bulk Insert Task 1, Bulk Insert Task: An error occurred with the following error message: "Cannot fetch a row from OLE DB provider "BULK" for linked server "(null)".The OLE DB provider "BULK" for linked server "(null)" reported an error. The provider did not give any information about the error.The bulk load failed. The column is too long in the data file for row 1, column 24. Verify that the field terminator and row terminator are specified correctly.Bulk load data conversion error (type mismatch or invalid character for the specified codepage) for row 1, column 23 (cancelled).".
Task failed: Bulk Insert Task 1
Task failed: Bulk Insert Task
Warning: 0x80019002 at Package3: The Execution method succeeded, but the number of errors raised (2) reached the maximum allowed (1); resulting in failure. This occurs when the number of errors reaches the number specified in MaximumErrorCount. Change the MaximumErrorCount or fix the errors.
SSIS package "Package3.dtsx" finished: Failure.
hello all .. I have a form that includes two textboxes (Date and Version) .. When I try to insert the record I get the following error message .. seems that something wrong with my coversion (Data type)"The conversion of a char data type to a datetime data type resulted in an out-of-range datetime value.The statement has been terminated."
in my SQL database I have the date feild as datetime and the version as nvarchar(max)
this is the code in the vb page .. Can you please tell me how to solve this problem?Imports System.Data.SqlClient
Imports system.web.configuration
Partial Class Admin_emag_insert
Inherits System.Web.UI.Page
Protected Sub Page_Load(ByVal sender As Object, ByVal e As System.EventArgs) Handles Me.Load
Record_DateTextBox.Text = DateTime.Now
End Sub
Protected Sub clearButton_Click(ByVal sender As Object, ByVal e As System.EventArgs) Handles clearButton.Click
Me.VersionTextBox.Text = ""
End Sub
Protected Sub addButton_Click(ByVal sender As Object, ByVal e As System.EventArgs) Handles addButton.Click
Dim objConnection As SqlConnection
Dim objDataCommand As SqlCommand
Dim ConnectionString As String
Dim record_date As Date
Dim version As String
Dim emagSQL As String
'save form values in variables
record_date = Record_DateTextBox.Text
version = VersionTextBox.Text
ConnectionString = WebConfigurationManager.ConnectionStrings("HRDBConnectionString").ConnectionString
'Create and open the connection
objConnection = New SqlConnection(ConnectionString)
objConnection.Open()
emagSQL = "Insert into E_Magazine (Record_Date, Version ) " & _
"values('" & record_date & "','" & version & "')"
'Create and execute the command
objDataCommand = New SqlCommand(emagSQL, objConnection)
objDataCommand.ExecuteNonQuery()
objConnection.Close()
AddMessage.Text = "A new emagazine was added successfully"
Me.VersionTextBox.Text = ""
End Sub
End Class
update tblPact_2008_0307 set student_dob = '30/01/1996' where student_rcnumber = 1830when entering update date in format such as ddmmyyyyi know the sql query date format entered should be in mmddyyyy formatis there any way to change the date format entered to ddmmyyyy in sql query?
View 5 Replies View RelatedAdvance thanks ....... My table is TimeSheet:----------------------------------- CREATE TABLE [dbo].[TimeSheet]( [autoid] [int] IDENTITY(1,1) NOT NULL, [UserId] [int] NOT NULL, [starttime] [datetime] NOT NULL, [endtime] [datetime] NOT NULL, [summary] [nvarchar](50) NOT NULL, [description] [nvarchar](50) NULL, [dtOfEntry] [datetime] NOT NULL, [Cancelled] [bit] NULL) ON [PRIMARY] My Query is------------------ insert into timesheet (UserId, StartTime,EndTime, Summary, Description,DtOfEntry) values (2, '19/04/2008 2:05:06 PM', '19/04/2008 2:05:06 PM', '66', '6666','19/04/2008 2:05:06 PM')i m not able to insert value Error Message is-------------------------Msg 242, Level 16, State 3, Line 1The conversion of a char data type to a datetime data type resulted in an out-of-range datetime value.The statement has been terminated. can any body give any solution
View 5 Replies View RelatedHey, I have a big problem that i wanna search data from SQL by DateTime like thatselect * from test where recorddate='MyVariableWhichHoldDate'i use variable that holds Date info.i searched a lot infomation on net but there is no perfect solution. i know why this occur but there is no function to solve this problem. i used a lot of ways. it accept yyyy-mm-dd format but my variable format is dd-mm-yyyyy . is there any function for this problem? and any other solution.thanks for ur attentionregards
View 6 Replies View Related I am using Visual Studio 2005 and SQL Express 2005. The database was converted from MS Access 2003 to SQL Express by using the upsize wizard.
I would like to store the current date & time in a column in a table. This column is a smalldatetime column called 'lastlogin'.
The code I'm using is:
Dim sqlcommand As New SqlCommand _
("UPDATE tableXYZ SET Loggedin = 'True', LastLogin = GetDate() WHERE employeeID = '" & intEmployeeID.ToString & "'", conn)
Try
conn.Open()
sqlcommand.ExecuteNonQuery()
conn.Close()
Catch ex As Exception
MessageBox.Show(ex.Message)
End Try
This code works fine on my local machine and local SQL server. However at the client side this code results in the error as mentioned in the subject of this thread. I first used 'datetime.now' instead of 'getdate()', but that caused the same error. Then I changed the code to 'getdate()', but the error still remains.
The server at the client is running Windows Server 2000 UK . My local machiine is running WIndows XP Dutch.
Maybe the conversion from Dutch to UK has something to do with it. But this should be solved by using the 'Getdate()' function..... ?
There are a few databases I work with that have been designed where varchar columns are used to store what actually displays on the front end as Ints, Decimals, Varchars, Datetimes, checkboxes.
I often have to write integrations with these databases bringing data in and prefer to validate the data whilst loading from the staging tables.
I have seen allsorts of values being passed into the staging tables that will load into the target database because the columns are all varchars but the values don't display on the front end because the app actively filters bad values out.
What I would like to do is for my validation scripts to warn up front of potentially invalid datatypes. My problem is that forexample the ISNUMERIC() function return 1 for the value ',1234' but a CONVERT(NUMERIC, ',1234') or CAST(',1234' AS NUMERIC) will fail with a "Error converting data type varchar to numeric).
I've been trying to locate a set of reliable datatype testing functions that will reliably determine if a varchar can be converted to a given data type or not.
I'm trying to pass a character (D) to an integer data type!i'm getting this error:Conversion failed when converting the varchar value '17D' to data type int.
View 5 Replies View RelatedCan i still get the sum of a field even if the data type is of type varchar?
thanks!
Funnyfrog
Hi all,
I have 2 conversion related to same table.
a) Date:
I have a table called Table1. It has a field called HDate(nvarchar type). The records are like this;
HDate
H01042008
H01082008
H01102006
H01112008
Each records always start with an H charatcter, the remaining characters always represents date in the format of DDMMYYY.
I want to convert this format into the date format of YYYYMMDD. So once coverted, the record should be as follows;
HDateConverted
2008-04-01
2008-08-01
2006-10-01
2008-11-01
b) In the same table I have another field called NoID of nvarchar type. The records are like this;
NoID
00.
000
001
002
003
004
005
006
007
008
010
I want to convert it to Integer. Once converted the records for above example should be like this;
NoIDConverted
0
0
1
2
3
4
5
6
7
8
10
How can I solve both these conversions?..
Thanks a million for your qucik help.
Zee
I am using a stored procedure which returns a value of charecter datatype 'V' to the calling program.I am getting an sql exception System.Data.SqlClient.SqlException: Syntax error converting the varchar value 'V' to a column of data type inti didnot define any int datatype in my tablethis is my codeSqlCommand com = new SqlCommand("StoredProcedure4", connection);com.CommandType = CommandType.StoredProcedure; SqlParameter p1 = com.Parameters.Add("@uname", SqlDbType.NVarChar);SqlParameter p2 = com.Parameters.Add("@opwd", SqlDbType.NVarChar);SqlParameter p3 = com.Parameters.Add("@role", SqlDbType.NVarChar);p3.Direction = ParameterDirection.ReturnValue;p1.Value = username.Text.Trim();p2.Value = password.Text.Trim();com.ExecuteReader();lblerror2.Text = (string)(com.Parameters["@role"].Value); can your figure out what is the error ? Is it a coding error or error of the databse
View 3 Replies View RelatedI encounter this particular error.
Exception Details: System.Data.SqlClient.SqlException: The data types varchar and text are incompatible in the equal to operator.
Line 21: Dim reader As SqlDataReader = command.ExecuteReader()
This is the first time I'm trying out with MS SQL so I'm abit lost. I hope my code is correct and I've did a little search. I did not set "Text" in my database, I use int and varchar. Here's the affected part of my code and the database. Dim password As String = ""
Dim querystring As String = "SELECT Password FROM Member WHERE Username = @username"
'Dim conn as SqlConnection
Using conn As New SqlConnection(ConfigurationManager.ConnectionStrings("mainconnect").ConnectionString)
Dim command As New SqlCommand(querystring, conn)
command.Parameters.Add("@username", SqlDbType.Text)
command.Parameters("@username").Value = txtLogin.Text
conn.Open()
Dim reader As SqlDataReader = command.ExecuteReader()
While reader.Read()
password = reader("Password").ToString()
End While
reader.Close()
End Using
My database:
User_ID int(4)
Username varchar(50)
Password varchar(255)
Email varchar(50)
Any ideas?
I am parsing a documnet and i am grabbing that document into a variable of datatype varchar. The document contains more than 8k(upto 30k characters) characters. So how can I handle this situation.How can I get that document into my local varchar variable.
thanks.
Hi,I keep getting the error:System.Data.SqlClient.SqlException: Conversion failed when converting the varchar value '@qty' to data type int. When I initiate the insert and update.I tried adding a: Convert.ToInt32(TextBox1.Text), but it didn't work.. Could someone help?My code:private bool ExecuteUpdate(int quantity){ SqlConnection con = new SqlConnection(); con.ConnectionString = "Data Source=.\SQLEXPRESS;AttachDbFilename=|DataDirectory|\ASPNETDB.MDF;Integrated Security=True;User Instance=True"; con.Open(); SqlCommand command = new SqlCommand(); command.Connection = con; TextBox TextBox1 = (TextBox)FormView1.FindControl("TextBox1"); Label labname = (Label)FormView1.FindControl("Label3"); Label labid = (Label)FormView1.FindControl("Label13"); command.CommandText = "UPDATE Items SET Quantityavailable = Quantityavailable - '@qty' WHERE productID=@productID"; command.Parameters.Add("@qty", TextBox1.Text); command.Parameters.Add("@productID", labid.Text); command.ExecuteNonQuery(); con.Close(); return true;} private bool ExecuteInsert(String quantity) { SqlConnection con = new SqlConnection(); con.ConnectionString = "Data Source=.\SQLEXPRESS;AttachDbFilename=|DataDirectory|\ASPNETDB.MDF;Integrated Security=True;User Instance=True"; con.Open(); SqlCommand command = new SqlCommand(); command.Connection = con; TextBox TextBox1 = (TextBox)FormView1.FindControl("TextBox1"); Label labname = (Label)FormView1.FindControl("Label3"); Label labid = (Label)FormView1.FindControl("Label13"); command.CommandText = "INSERT INTO Transactions (Usersname,Itemid,itemname,Date,Qty) VALUES (@User,@productID,@Itemsname,@date,@qty)"; command.Parameters.Add("@User", System.Web.HttpContext.Current.User.Identity.Name); command.Parameters.Add("@Itemsname", labname.Text); command.Parameters.Add("@productID", labid.Text); command.Parameters.Add("@qty", Convert.ToInt32(TextBox1.Text)); command.Parameters.Add("@date", DateTime.Now.ToString()); command.ExecuteNonQuery(); con.Close(); return true; }protected void Button2_Click(object sender, EventArgs e){ TextBox TextBox1 = FormView1.FindControl("TextBox1") as TextBox; ExecuteUpdate(Int32.Parse(TextBox1.Text) );}protected void Button2_Command(object sender, CommandEventArgs e) { if (e.CommandName == "Update") { TextBox TextBox1 = FormView1.FindControl("TextBox1") as TextBox; ExecuteInsert(TextBox1.Text); } } Thanks so much if someone can!Jon
View 33 Replies View RelatedI am trying to execute a custom DTS package i made using VB. The SQL datatypes that I am using are short, VarChar and Single in SQL. Would anybody happen to know the equivalent data types in MSAccess 97?
View 1 Replies View Related