Data Type Error
Apr 26, 2007
I have created a Foreach Loop container which generates a string variable which is a Select statement that in turn used in my OLE DB source in my Data Flow task. I have a 3 variables that I am using to create the Select statement. Two of them work fine but the 3rd gives me an error "Cannot convert varchar to numeric" after about the 5th or 6th loop which is odd as the variable is the same for each pass.
The SQL Task linked to the Foreach Loop is a query as follows
SELECT DISTINCT
CAST(FYr as varchar(4)) as FYr,
CAST(Acct1 as varchar(13)) as Acct1,
CAST(Acct2 as varchar(13)) as Acct2
FROM GL, AcctTbl
The resulting dataset looks like this (there is only one record in AcctTbl)
FYr Acct1 Acct2
2000 400.00 307.00
2001 400.00 307.00
2002 400.00 307.00
etc, which is exactly what I want.
I've created package scope string variables for sFYr, sAcct1 and sAcct2 as well as another variable qrySQL
The value for qrySQL string variable is something like this
"Select " + @User :: sFYr + " as FiscalYear, Account, " + @User :: sAcct2 + "Amount FROM tblGL WHERE Account < " + @User :: sAcct1
This is then used as my datasourse in my data flow task
When I run the package it goes through a half a dozen iterations ( there are about a dozen total rows to iterate) and successfully writes the results to my data destination table but then fails with the "cannot convert varchar to numeric" message.
It seems to be with the sAcct1 variable because if I use the same string for my qrySQL except I replace the sAcct1 variable with string (as shown below) the package completes successfully
"Select " + @User :: sFYr + " as FiscalYear, Account, " + @User :: sAcct2 + "Amount FROM tblGL WHERE Account < '400.00'
Does anyone have any ideas? Can I not use the < to compare string? The Account field that I'm comparing is a varchar(13) field. I've even tried casting the Account and sAcct1 variable as numeric in the qrySQL string and I'm getting the same failure after several iterations.
Any insight would really be appreciated. I've lost a bit of hair over this one.
Thanks in advance
View 4 Replies
ADVERTISEMENT
Jul 23, 2005
Hi all,I have a table called PTRANS with few columns (see create script below).I have created a view on top that this table VwTransaction (See below)I can now run this query without a problem:select * from dbo.VwTransactionwhereAssetNumber = '101001' andTransactionDate <= '7/1/2003'But when I create an index on the PTRANS table using the command below:CREATE INDEX IDX_PTRANS_CHL# ON PTRANS(CHL#)The same query that ran fine before, fails with the error:Server: Msg 242, Level 16, State 3, Line 1The conversion of a char data type to a datetime data type resulted inan out-of-range datetime value.I can run the same query by commeting out the AssetNumber clause and itworks fine. I can also run the query commenting out the TransactionDatecolumn and it works fine. But when I have both the conditions in theWHERE clause, it gives me this error. Dropping the index solves theproblem.Can anyone tell me why an index would cause a query to fail?Thanks a lot in advance,AmirCREATE TABLE [PTRANS] ([CHL#] [varchar] (100) COLLATE SQL_Latin1_General_CP1_CI_AS NULL ,[CHCENT] [numeric](2, 0) NOT NULL ,[CHYYMM] [numeric](4, 0) NOT NULL ,[CHDAY] [numeric](2, 0) NOT NULL ,[CHTC] [char] (2) COLLATE SQL_Latin1_General_CP1_CI_AS NOT NULL) ON [PRIMARY]GOCREATE VIEW dbo.vwTransactionsASSELECT CONVERT(datetime, dbo.udf_AddDashes(REPLICATE('0', 2 -LEN(CHCENT)) + CONVERT(varchar, CHCENT) + REPLICATE('0', 4 -LEN(CHYYMM))+ CONVERT(varchar, CHYYMM) + REPLICATE('0', 2 -LEN(CHDAY)) + CONVERT(varchar, CHDAY)), 20) AS TransactionDate,CHL# AS AssetNumber,CHTC AS TransactionCodeFROM dbo.PTRANSWHERE (CHCENT <> 0) AND (CHTC <> 'RA')*** Sent via Developersdex http://www.developersdex.com ***Don't just participate in USENET...get rewarded for it!
View 1 Replies
View Related
Apr 16, 2008
Hi,
The table in SQL has column Availability Decimal (8,8)
Code in c# using sqlbulkcopy trying to insert values like 0.0000, 0.9999, 29.999 into the field Availability
we tried the datatype float , but it is converting values to scientific expressions€¦(eg: 8E-05) and the values displayed in reports are scientifc expressions which is not expected
we need to store values as is
Error:
base {System.SystemException} = {"The given value of type SqlDecimal from the data source cannot be converted to type decimal of the specified target column."}
"System.InvalidOperationException: The given value of type SqlDecimal from the data source cannot be converted to type decimal of the specified target column. ---> System.InvalidOperationException: The given value of type SqlDecimal from the data source cannot be converted to type decimal of the specified target column. ---> System.ArgumentException: Parameter value '1.0000' is out of range.
--- End of inner exception stack trace ---
at System.Data.SqlClient.SqlBulkCopy.ConvertValue(Object value, _SqlMetaData metadata)
--- End of inner exception stack trace ---
at System.Data.SqlClient.SqlBulkCopy.ConvertValue(Object value, _SqlMetaData metadata)
at System.Data.SqlClient.SqlBulkCopy.WriteToServerInternal()
at System.Data.SqlClient.SqlBulkCopy.WriteRowSourceToServer(Int32 columnCount)
at System.Data.SqlClient.SqlBulkCopy.WriteToServer(DataTable table, DataRowState rowState)
at System.Data.SqlClient.SqlBulkCopy.WriteToServer(DataTable table)
at MS.Internal.MS
COM.AggregateRealTimeDataToSQL.SqlHelper.InsertDataIntoAppServerAvailPerMinute(String data, String appName, Int32 dateID, Int32 timeID) in C:\VSTS\MXPS Shared Services\RealTimeMonitoring\AggregateRealTimeDataToSQL\SQLHelper.cs:line 269"
Code in C#
SqlBulkCopy bulkCopy = new SqlBulkCopy(sqlConnection, SqlBulkCopyOptions.Default);
DataRow dr;
DataTable dt = new DataTable();
DataColumn dc;
try
{
dc = dt.Columns.Add("Availability", typeof(decimal));
€¦.
dr["Availability"] = Convert.ToDecimal(s[2]); ------ I tried SqlDecimal
€¦€¦€¦.
}
bulkCopy.DestinationTableName = "dbo.[Tbl_Fact_App_Server_AvailPerMinute]";
bulkCopy.WriteToServer(dt);
thx
View 8 Replies
View Related
Jan 28, 2008
update tblPact_2008_0307 set student_dob = '30/01/1996' where student_rcnumber = 1830when entering update date in format such as ddmmyyyyi know the sql query date format entered should be in mmddyyyy formatis there any way to change the date format entered to ddmmyyyy in sql query?
View 5 Replies
View Related
Oct 19, 2006
I am trying to put the data from a field in my database into a row in a table using the SQLDataSource.Select statement. I am using the following code: FileBase.SelectCommand = "SELECT Username FROM Files WHERE Filename = '" & myFileInfo.FullName & "'" myDataRow("Username") = CType(FileBase.Select(New DataSourceSelectArguments()), String)But when I run the code, I get the following error:Server Error in '/YorZap' Application. Unable to cast object of type 'System.Data.DataView' to type 'System.String'. Description: An unhandled exception occurred during the execution of the current web request. Please review the stack trace for more information about the error and where it originated in the code. Exception Details: System.InvalidCastException: Unable to cast object of type 'System.Data.DataView' to type 'System.String'.Source Error: Line 54: FileBase.SelectCommand = "SELECT Username FROM Files WHERE Filename = '" & myFileInfo.FullName & "'"
Line 55: 'myDataRow("Username") = CType(FileBase.Select(New DataSourceSelectArguments).GetEnumerator.Current, String)
Line 56: myDataRow("Username") = CType(FileBase.Select(New DataSourceSelectArguments()), String)
Line 57:
Line 58: filesTable.Rows.Add(myDataRow)Source File: D:YorZapdir_list_sort.aspx Line: 56 Stack Trace: [InvalidCastException: Unable to cast object of type 'System.Data.DataView' to type 'System.String'.]
ASP.dir_list_sort_aspx.BindFileDataToGrid(String strSortField) in D:YorZapdir_list_sort.aspx:56
ASP.dir_list_sort_aspx.Page_Load(Object sender, EventArgs e) in D:YorZapdir_list_sort.aspx:7
System.Web.Util.CalliHelper.EventArgFunctionCaller(IntPtr fp, Object o, Object t, EventArgs e) +13
System.Web.Util.CalliEventHandlerDelegateProxy.Callback(Object sender, EventArgs e) +45
System.Web.UI.Control.OnLoad(EventArgs e) +80
System.Web.UI.Control.LoadRecursive() +49
System.Web.UI.Page.ProcessRequestMain(Boolean includeStagesBeforeAsyncPoint, Boolean includeStagesAfterAsyncPoint) +3743
Version Information: Microsoft .NET Framework Version:2.0.50727.42; ASP.NET Version:2.0.50727.210 Please help me!
View 3 Replies
View Related
Mar 22, 2007
$exception {"Arithmetic overflow error converting expression to data type smalldatetime.
The statement has been terminated."} System.Exception {System.Data.SqlClient.SqlException}
occurs
here is my code
protected void EmailSubmitBtn_Click(object sender, EventArgs e)
{
SqlDataSource NewsletterSqlDataSource = new SqlDataSource();
NewsletterSqlDataSource.ConnectionString = ConfigurationManager.ConnectionStrings["NewsletterConnectionString"].ToString();
//Text version
NewsletterSqlDataSource.InsertCommandType = SqlDataSourceCommandType.Text;
NewsletterSqlDataSource.InsertCommand = "INSERT INTO NewsLetter (EmailAddress, IPAddress, DateTimeStamp) VALUES (@EmailAddress, @IPAddress, @DateTimeStamp)";
//storeprocedure version
//NewsletterSqlDataSource.InsertCommandType = SqlDataSourceCommandType.StoredProcedure;
//NewsletterSqlDataSource.InsertCommand = "EmailInsert";
NewsletterSqlDataSource.InsertParameters.Add("EmailAddress", EmailTb.Text);
NewsletterSqlDataSource.InsertParameters.Add("IPAddress", Request.UserHostAddress.ToString());
NewsletterSqlDataSource.InsertParameters.Add("DateTimeStamp", DateTime.Now.ToString());
int rowsAffected = 0;
try
{
rowsAffected = NewsletterSqlDataSource.Insert();
}
catch (Exception ex)
{
Server.Transfer("NewsletterProblem.aspx");
}
finally
{
NewsletterSqlDataSource = null;
}
if (rowsAffected != 1)
{
Server.Transfer("NewsletterProblem.aspx");
}
else
{
Server.Transfer("NewsletterSuccess.aspx");
}
View 3 Replies
View Related
Apr 20, 2007
Hi, all
I'm getting this error at runtime when my page tries to populate a datagrid. Here's the relevant code.
First, the user selects his choice from a dropdownlist, populated with a sqldatasource control on the aspx side:<asp:SqlDataSource ID="sqlDataSourceCompany" runat="server" ConnectionString="<%$ ConnectionStrings:ConnectionString %>"
SelectCommand="SELECT [PayrollCompanyID], [DisplayName] FROM [rsrc_PayrollCompany] ORDER BY [DisplayName]">
</asp:SqlDataSource>
And the dropdown list's code:<asp:DropDownList ID="ddlPayrollCompany" runat="server" AutoPostBack="True" DataSourceID="sqlDataSourcePayrollCompany"
DataTextField="DisplayName" DataValueField="PayrollCompanyID">
</asp:DropDownList>
Then, I use the selectedindexchanged event to bind the data to the datagrid. Here's that code:
1 Sub BindData()
2
3 Dim ds As New DataSet
4 Dim sda As SqlClient.SqlDataAdapter
5 Dim strSQL As String
6 Dim strCon As String
7
8 strSQL = "SELECT [SocialSecurityNumber], [Prefix], [FirstName], [LastName], [HireDate], [PayrollCostPercent], " & _
9 "[Phone], [BadgeNumber], [IsSupervisor], [SupervisorID], [IsUser], [IsScout] FROM [rsrc_Personnel] " & _
10 "WHERE ([PayrollCompanyID] = @PayrollCompanyID)"
11
12 strCon = "Data Source=DATASOURCE;Initial Catalog=DATABASE;User ID=USERID;Password=PASSWORD"
13
14 sda = New SqlClient.SqlDataAdapter(strSQL, strCon)
15
16 sda.SelectCommand.Parameters.Add(New SqlClient.SqlParameter("@PayrollCompanyID", Me.ddlPayrollCompany.SelectedItem.ToString()))
17
18 sda.Fill(ds, "rsrc_Personnel")
19
20 dgPersonnel.DataSource = ds.Tables("rsrc_Personnel")
21 dgPersonnel.DataBind()
22
23 End Sub
24
I'm assuming my problem lies in line 16 of the above code. I've tried SelectedItemIndex, SelectedItemValue too and get errors for those, as well.
What am I missing?
Thanks for anyone's help!
Cappela07
View 2 Replies
View Related
Feb 12, 2005
I am trying to create a page that adds users to a MS SQL database. In doing so, I have run into a couple errors that I can't seem to get past. I am hoping that I could get some assistance with them.
Error from SQL Debug:
---
Server: Msg 295, Level 16, State 3, Procedure AdminAddUser, Line 65
[Microsoft][ODBC SQL Server Driver][SQL Server]Syntax error converting character string to smalldatetime data type.
---
Error from page execution:
---
Exception Details: System.Data.OleDb.OleDbException: Error converting data type varchar to numeric.
Source Error:
Line 77: cmd.Parameters.Add( "@zip", OleDbType.VarChar, 100 ).Value = Request.Form("userZip")
Line 78:
Line 79: cmd.ExecuteNonQuery()
---
Below is what I currently have for my stored procedure and the pertinent code from the page itself.
Stored Procedure:
---
CREATE PROCEDURE dbo.AdminAddUser( @username varchar(100),
@password varchar(100),
@email varchar(100),
@acct_type varchar(100),
@realname varchar(100),
@billname varchar(100),
@addr1 varchar(100),
@addr2 varchar(100),
@city varchar(100),
@state varchar(100),
@country varchar(100),
@zip varchar(100),
@memo varchar(100) )
AS
BEGIN TRAN
--
-- Returns 1 if successful
-- 2 if username already exists
-- 0 if there was an error adding the user
--
SET NOCOUNT ON
DECLARE @error int, @rowcount int
--
-- Make sure that there isn't already a user with this username
--
SELECT userID
FROM users
WHERE username=@username
SELECT @error = @@ERROR, @rowcount = @@ROWCOUNT
IF @error <> 0 OR @rowcount > 0 BEGIN
ROLLBACK TRAN
RETURN 2
END
--
-- Set expiration date
--
DECLARE @expDate AS smalldatetime
IF @acct_type = "new_1yr" BEGIN
SET @expDate = DATEADD( yyyy, 1, GETDATE() )
END
IF @acct_type = "new_life" BEGIN
SET @expDate = DATEADD( yyyy, 40, GETDATE() )
END
DECLARE @paidCopies AS decimal
SET @paidCopies = 5
--
-- Add this user to the database
--
IF @acct_type <> "new" BEGIN
INSERT INTO users (userName, userPassword, userEmail, userJoinDate,
userPaidCopies, userExpirationDate, userLastPaidDate,
userBname, userRealName, userAddr1, userAddr2, userCity,
userState, userCountry, userZip, userMemo )
VALUES (@username, @password, @email, GETDATE(), @realname, @billname,
@paidCopies, @expDate, GETDATE(), @addr1, @addr2, @city, @state, @country, @zip, @memo )
SELECT @error = @@ERROR, @rowcount = @@ROWCOUNT
IF @error <> 0 OR @rowcount < 1 BEGIN
ROLLBACK TRAN
RETURN 0
END
END
IF @acct_type = "new" BEGIN
INSERT INTO users (userName, userPassword, userEmail, userJoinDate,
userBname, userRealName, userAddr1, userAddr2, userCity,
userState, userCountry, userZip, userMemo )
VALUES (@username, @password, @email, GETDATE(), @realname, @billname,
@addr1, @addr2, @city, @state, @country, @zip, @memo )
SELECT @error = @@ERROR, @rowcount = @@ROWCOUNT
IF @error <> 0 OR @rowcount < 1 BEGIN
ROLLBACK TRAN
RETURN 0
END
END
COMMIT TRAN
RETURN 1
GO
---
Page Code:
---
Sub AddUser(Sender as Object, e as EventArgs)
Dim db_conn_str As String
Dim db_conn As OleDbConnection
Dim resultAs Int32
Dim cmdAs OleDbCommand
db_conn_str = "Provider=SQLOLEDB;Data Source=localhost;Initial Catalog=xxxxx; User ID=xxxxx; PWD=xxxxx;"
db_conn = New OleDbConnection( db_conn_str )
db_conn.Open()
cmd = new OleDbCommand( "AdminAddUser", db_conn )
cmd.CommandType = CommandType.StoredProcedure
cmd.Parameters.Add( "result", OleDbType.Integer ).Direction = ParameterDirection.ReturnValue
cmd.Parameters.Add( "@username", OleDbType.VarChar, 100 ).Value = Request.Form("userName")
cmd.Parameters.Add( "@password", OleDbType.VarChar, 100 ).Value = Request.Form("userPass")
cmd.Parameters.Add( "@email", OleDbType.VarChar, 100 ).Value = Request.Form("userEmail")
cmd.Parameters.Add( "@acct_type", OleDbType.VarChar, 100 ).Value = Request.Form("userEmail")
cmd.Parameters.Add( "@realname", OleDbType.VarChar, 100 ).Value = Request.Form("userRealName")
cmd.Parameters.Add( "@billname", OleDbType.VarChar, 100 ).Value = Request.Form("userBname")
cmd.Parameters.Add( "@addr1", OleDbType.VarChar, 100 ).Value = Request.Form("userAddr1")
cmd.Parameters.Add( "@addr2", OleDbType.VarChar, 100 ).Value = Request.Form("userAddr2")
cmd.Parameters.Add( "@city", OleDbType.VarChar, 100 ).Value = Request.Form("userCity")
cmd.Parameters.Add( "@state", OleDbType.VarChar, 100 ).Value = Request.Form("userState")
cmd.Parameters.Add( "@country", OleDbType.VarChar, 100 ).Value = Request.Form("userCountry")
cmd.Parameters.Add( "@memo", OleDbType.VarChar, 100 ).Value = Request.Form("userMemo")
cmd.Parameters.Add( "@zip", OleDbType.VarChar, 100 ).Value = Request.Form("userZip")
cmd.ExecuteNonQuery()
(...)
---
View 1 Replies
View Related
Jul 24, 2015
When I execute the below stored procedure I get the error that "Arithmetic overflow error converting expression to data type int".
USE [FileSharing]
GO
/****** Object: StoredProcedure [dbo].[xlaAFSsp_reports] Script Date: 24.07.2015 17:04:10 ******/
SET ANSI_NULLS ON
GO
SET QUOTED_IDENTIFIER ON
GO
[Code] .....
Msg 8115, Level 16, State 2, Procedure xlaAFSsp_reports, Line 25
Arithmetic overflow error converting expression to data type int.
The statement has been terminated.
(1 row(s) affected)
View 10 Replies
View Related
Aug 31, 2004
Hi There,
I'm using C# to get a value for a DOUBLE precision variable, called "Length", from a textBox using the following line:
Length = Convert.ToDouble( txtLength.Text )
I'm also using the following lines to prepare my stored procedure call:
arParms[9] = new SqlParameter("@Length", SqlDbType.Decimal, 5);
arParms[9].Value = record.Length;
My stored procedure has the following parameter definition:
@Length decimal(9,3)
My problem is that if someone types a value bigger than 999999 in the textbox he will get for sure the following error:
System.Data.SqlClient.SqlException: Error converting data type numeric to decimal.
I don't know how to either make sql or C# to truncate the value or catch the exception to automatically assign 0 to the parameter.
Please Help.
Moshe
View 1 Replies
View Related
Aug 31, 2006
I am using a stored procedure which returns a value of charecter datatype 'V' to the calling program.I am getting an sql exception System.Data.SqlClient.SqlException: Syntax error converting the varchar value 'V' to a column of data type inti didnot define any int datatype in my tablethis is my codeSqlCommand com = new SqlCommand("StoredProcedure4", connection);com.CommandType = CommandType.StoredProcedure; SqlParameter p1 = com.Parameters.Add("@uname", SqlDbType.NVarChar);SqlParameter p2 = com.Parameters.Add("@opwd", SqlDbType.NVarChar);SqlParameter p3 = com.Parameters.Add("@role", SqlDbType.NVarChar);p3.Direction = ParameterDirection.ReturnValue;p1.Value = username.Text.Trim();p2.Value = password.Text.Trim();com.ExecuteReader();lblerror2.Text = (string)(com.Parameters["@role"].Value); can your figure out what is the error ? Is it a coding error or error of the databse
View 3 Replies
View Related
Sep 10, 2007
I have one column in SQL Server 2005 of data type VARCHAR(4000).
I have imported sql Server 2005 database data into one mdb file.After importing a data into the mdb file, above column
data type converted into the memo type in the Access database.
now when I am trying to import a data from this MS Access File(db1.mdb) into the another SQL Server 2005 database, got the error of Unicode Converting a memo data type conversion in Export/Import data wizard.
Could you please let me know what is the reason?
I know that memo data type does not supported into the SQl Server 2005.
I am with SQL Server 2005 Standard Edition with SP2.
Please help me to understans this issue correctly?
View 4 Replies
View Related
Aug 21, 2006
I am trying to migrate our Portals database from SQL2000 to SQL2005, but I received "SQL Type Variant Data" error during the data migration with some database. Can anyone help me with this?
Thanks,
Jay
View 1 Replies
View Related
Dec 14, 2005
After testing out the application i write on the local pc. I deploy it to the webserver to test it out. I get this error.
System.Data.SqlClient.SqlException: The conversion of a char data type to a
datetime data type resulted in an out-of-range datetime value.
Notes: all pages that have this error either has a repeater or datagrid which load data when page loading.
At first I thought the problem is with the date, but then I can see
that some other pages that has datagrid ( that has a date field) work
just fine.
anyone having this problem before?? hopefully you guys can help.
Thanks,
View 4 Replies
View Related
Nov 6, 2007
Hi,I keep getting the error:System.Data.SqlClient.SqlException: Conversion failed when converting the varchar value '@qty' to data type int. When I initiate the insert and update.I tried adding a: Convert.ToInt32(TextBox1.Text), but it didn't work.. Could someone help?My code:private bool ExecuteUpdate(int quantity){ SqlConnection con = new SqlConnection(); con.ConnectionString = "Data Source=.\SQLEXPRESS;AttachDbFilename=|DataDirectory|\ASPNETDB.MDF;Integrated Security=True;User Instance=True"; con.Open(); SqlCommand command = new SqlCommand(); command.Connection = con; TextBox TextBox1 = (TextBox)FormView1.FindControl("TextBox1"); Label labname = (Label)FormView1.FindControl("Label3"); Label labid = (Label)FormView1.FindControl("Label13"); command.CommandText = "UPDATE Items SET Quantityavailable = Quantityavailable - '@qty' WHERE productID=@productID"; command.Parameters.Add("@qty", TextBox1.Text); command.Parameters.Add("@productID", labid.Text); command.ExecuteNonQuery(); con.Close(); return true;} private bool ExecuteInsert(String quantity) { SqlConnection con = new SqlConnection(); con.ConnectionString = "Data Source=.\SQLEXPRESS;AttachDbFilename=|DataDirectory|\ASPNETDB.MDF;Integrated Security=True;User Instance=True"; con.Open(); SqlCommand command = new SqlCommand(); command.Connection = con; TextBox TextBox1 = (TextBox)FormView1.FindControl("TextBox1"); Label labname = (Label)FormView1.FindControl("Label3"); Label labid = (Label)FormView1.FindControl("Label13"); command.CommandText = "INSERT INTO Transactions (Usersname,Itemid,itemname,Date,Qty) VALUES (@User,@productID,@Itemsname,@date,@qty)"; command.Parameters.Add("@User", System.Web.HttpContext.Current.User.Identity.Name); command.Parameters.Add("@Itemsname", labname.Text); command.Parameters.Add("@productID", labid.Text); command.Parameters.Add("@qty", Convert.ToInt32(TextBox1.Text)); command.Parameters.Add("@date", DateTime.Now.ToString()); command.ExecuteNonQuery(); con.Close(); return true; }protected void Button2_Click(object sender, EventArgs e){ TextBox TextBox1 = FormView1.FindControl("TextBox1") as TextBox; ExecuteUpdate(Int32.Parse(TextBox1.Text) );}protected void Button2_Command(object sender, CommandEventArgs e) { if (e.CommandName == "Update") { TextBox TextBox1 = FormView1.FindControl("TextBox1") as TextBox; ExecuteInsert(TextBox1.Text); } } Thanks so much if someone can!Jon
View 33 Replies
View Related
Feb 13, 2008
Hi,
I can populate a dataTable with type double (C#) of say '1055.01' however when I save these to the CE3.5 database using a float(CE3.5) I lose the decimal portion. The 'offending' code is:
this.court0TableAdapter1.Update(this.mycourtsDataSet1.Court0);
this.mycourtsDataSet1.AcceptChanges();
this.court0TableAdapter1.Fill(this.mycourtsDataSet1.Court0);
This did not happen with VS2005/CE3.01.
I have tried changing all references to decimal (or money in CE3.5) without luck.
I'm beginning to think that string may be the way to go!!!!!!!
Can someone shed some light on my problem.
Thanks,
Later:
It's necessary to update the datatable adapter as the 3.01 and 3.5 CE are not compatible.
View 4 Replies
View Related
Mar 7, 2007
We have some columns in a table where the date is stored as 19980101 (YYYYMMDD). The data type for this column is NUMBER(8) in Oracle.
I need to copy rows from Oracle to SQL Server using SSIS. I used the Data Conversion transformation editor to change it to DT_DATE, but the rows are not being inserted to the destination.
On Error, If I fail the component, then the error is :
There was an error with input column "ORDER_DATE_CONV" (1191) on input "OLE DB Destination Input" (29). The column status returned was: "Conversion failed because the data value overflowed the specified type.".
Regards
RH
View 3 Replies
View Related
Oct 9, 2007
can anyone see as to why I would get this error with the following SP?
ALTER PROCEDURE [dbo].[SP]
@ID int = 0,
@emailFrom VARCHAR(50) = Null,
@emailDate VARCHAR(50) = Null,
@emailSubj VARCHAR(50) = Null,
@emailTxtBody VARCHAR(1000) = Null,
@emailHtmlBody VARCHAR(1000) = Null
AS
-- SET NOCOUNT ON added to prevent extra result sets from
-- interfering with SELECT statements.
SET NOCOUNT ON;
DECLARE @Notes VARCHAR (8000)
DECLARE @TicketID INT
DECLARE @emailBody VARCHAR (1000)
DECLARE @Length Int
SET @Notes = ''
SET @Length = LEN(@emailSubj)
-- insert a new entry
INSERT INTO PopEmail
( emailFrom, emailDate, emailSubj, emailTxtBody, emailHtmlBody )
VALUES
( @emailFrom, @emailDate, @emailSubj, @emailTxtBody, @emailHtmlBody )
-- get the new ID
SET @ID = @@identity
If ( @ID <> 0 ) AND ( ISNUMERIC(@emailSubj) = 1 )
Begin
IF @emailTxtBody IS NULL
BEGIN
Set @emailBody = @emailHtmlBody
PRINT '@emailHtmlBody: ' + @emailBody
END
ELSE
BEGIN
SET @emailBody = @emailTxtBody
PRINT '@emailTxtBody: ' + @emailBody
END
SET @TicketID = CAST( @emailSubj AS int )
SET @Notes = @emailFrom + ', ' + @emailDate + ', ' + @emailBody
Select @ID = ID From TicketDetails Where TicketDetails.TicketID = @TicketID
Exec differentSP @ID, @TicketID, @Notes
PRINT 'Subject: [' + @emailSubj + ']'
print 'length: ' + CAST(@Length as varchar (10))
Print 'emailSubj: ' + CAST( @emailSubj AS int )
PRINT 'ID: ' + Cast( @ID as varchar ( 10 ) )
PRINT 'TicketID: ' + Cast( @TicketID AS Varchar ( 10 ) )
PRINT 'Notes: ' + @Notes
PRINT 'ID: ' + Cast( @ID as varchar ( 10 ) )
END
ELSE
BEGIN
Print 'ID: ' + CAST(@ID AS VarChar(10))
PRINT 'ISNUMERIC: ' + CAST(ISNUMERIC(@emailSubj) AS VarChar (10))
PRINT 'Subject: [' + @emailSubj + ']'
END
View 2 Replies
View Related
Mar 27, 2008
Hi i keep getting this error when i search based on Team name (dropdownlist) or coach name(textbox). However it works when i make the search based on the region id(dropdownlist) here is my stored procedure;ALTER PROCEDURE [dbo].[stream_FindTeam]
-- Add the parameters for the stored procedure here
@coachName varchar(100),
@TeamName varchar(100),@regionID INT
AS
SELECT TeamID, coachName FROM Teams WHERE coachName LIKE @coachName OR TeamName= @TeamNameOR regionID = @regionID;
Here is my code;SqlConnection conn = new SqlConnection(ConfigurationManager.ConnectionStrings["streamConnectionString"].ConnectionString);
conn.Open();SqlCommand command = new SqlCommand("stream_FindTeam", conn);
command.CommandType = CommandType.StoredProcedure;command.Parameters.AddWithValue("@coachName", coachName.Text);
command.Parameters.AddWithValue("@TeamName", TeamList.SelectedValue);command.Parameters.AddWithValue("@regionID", Region.SelectedValue);SqlDataReader reader = command.ExecuteReader(CommandBehavior.CloseConnection);
DataList1.DataSource = reader;
DataList1.DataBind();
conn.Close();
View 13 Replies
View Related
Jun 21, 2001
I'm trying to convert a column from a varchar(14) to float, some of the rows contain some non-numeric characters. I've tried to write a cursor to step through the records, run cast(col1 as float) on each record, then use if @@error <> 0 to capture an error but it doesn't work. It steps through fine but when the cast command fails it ends the execution of the script with "Error converting data type varchar to float."
How can i capture this error without having the script fail? Is there another way to get this done?
Thanks,
Jim
View 1 Replies
View Related
Mar 11, 2000
I have a table with a column (locationID) of int data type, I want to pass a list of locationID's to a stored procedure using the IN operator (e.g. WHERE LocationID IN (list of locationID's)). What can I do to achieve this????
My stored procedure looks like this:
CREATE PROCEDURE [sp_test]
@sLocIDs varchar(30)
AS
select count(distinct TimeZoneID) As timezones,
from dimLocation
WHERE LocationID IN (@sLocIDs)
When I test it:
exec sp_test
@sLocIDs = '1,2,10'
I get "Error converting data type varchar to int"
View 1 Replies
View Related
Jun 22, 2006
Dear friends,
I am struggling to insert a date value in "dd-mm-yyyy" format to SQL server table having datatype as Date/Time.
Regional date setting for Server and Local systems are in dd-mm-yyyy format.
I am using following code
Dim DT As String
DT = Now()
DT = Format(DT, "MM/DD/YYYY")
for the inserting into table using command
ins_comm.CommandText = " INSERT INTO CARD (doe) values("& DT &")"
Procedure will end without any error ,but stored value for the date feild will be garbage value like 1900-01-01.
But if i used mm-dd-yyyy format ,it will get inserted.
What could be the reason,How I can save value in dd-mm-yyyy or dd-mm-yy format
Please help!!!
Graceson Mathew
View 1 Replies
View Related
Nov 9, 2007
this is an error i am getting trying to run the query below.
Invalid operator for data type. Operator equals minus, type equals varchar
SELECT regardingobjectidname, actualend, owneridname, createdbyname, activitytypecodename
FROM (SELECT regardingobjectidname, actualend, Owneridname, createdbyname, activitytypecodename, row_number() OVER (Partition BY
regardingobjectid
ORDER BY actualend DESC) AS recid
FROM FilteredActivityPointer
WHERE statecodename = 'completed') AS d
WHERE recid = 1 AND (owneridname IN (@user)) AND (activitytypecodename = 'phone call' OR
activitytypecodename = 'e-mail' OR
activitytypecodename = 'fax') AND (actualend > dateadd(d, -'
+ CONVERT(nVarChar(20), @NeglectedDays) + ',GetUTCDate()
ORDER BY actualend
Compnetsyslc
View 9 Replies
View Related
Feb 28, 2008
Hi,
I get "Error converting data type nvarchar to int." It is some kind of SQL exception. This is the code in my application.
SqlConnection sqlConnection1 = new SqlConnection(ConfigurationManager.ConnectionStrings["ConnectionString"].ConnectionString);
SqlCommand cmd = new SqlCommand();
Object start;
string activityID = Session["activitygroupID"].ToString();
cmd.Parameters.AddWithValue("@ActivityGroupID", activityID);
cmd.CommandText = "get_startdate";
cmd.CommandType = CommandType.StoredProcedure;
cmd.Connection = sqlConnection1;
sqlConnection1.Open();
SqlDataReader reader = cmd.ExecuteReader(); //The code stops here!!!
start = reader["StartDate"];
sqlConnection1.Close();
The stored procedure on the SQL-server looks like so. StartDate is of DateTime type.
ALTER PROCEDURE [dbo].[get_startdate]
-- Add the parameters for the stored procedure here
@ActivityGroupID int
AS
BEGIN
SELECT StartDate
FROM dbo.CurrentGroup
WHERE ActivityGroupID = @ActivityGroupID
END
I appreciate any help!
View 4 Replies
View Related
Feb 16, 2007
Hi,
It is not exactly what I stated in the subject - It's an outcome - exception thrown while executing non-query command.
I get this exception when I try to execute my stored procedure that takes datetime as one of its parameters.
I am using dataset designer to create table adapters and build queries. Then I simply use objectdatasource component that uses one of the table adapters and bind it to for example a detailsview control.
When I run this in debug mode and trace the objects everything looks perfect including these datetime parameters. It is sql server that throws the exception. I ran the sql profiler to see what exactly is going on, and I captured the command that is sent by ADO - it's broken into several lines right in the middle of my datetime parameters... this is the source of the problem. Everything is working fine when I take this command and execute it as a single line in the sql management studio.
Is there anything about ADO that I do not know?
View 2 Replies
View Related
Feb 25, 2008
I getting the above error can someone please help me solve it, here is the code:
public void InsertHost() { // TODO // - Call stored procedure to write to a log file writeToLog using (SqlConnection cn = new SqlConnection(ConfigurationManager.AppSettings["ConnectionString"])) { SqlCommand cmd = new SqlCommand("writeToLog", cn); cmd.CommandType = CommandType.StoredProcedure; cmd.Parameters.AddWithValue("@pAction", "action"); cmd.Parameters.AddWithValue("@pHostName", "Hostname"); cmd.Parameters.AddWithValue("@pUserNUm", "requestorID"); cn.Open(); cmd.ExecuteNonQuery(); } }
Here is the storedprocedure:
ALTER PROCEDURE dbo.writeToLog(@pAction varchar(10), @pUserNUm bigint, @pHostName varchar(25))AS INSERT INTO dbo.hostNameLog (action, requestorID, HostName)VALUES (@pAction, @pUserNUm, @pHostName)
Here is the table:
HostName - varchar, action - varchar, requestorID - bigint
I can't seem to find the error.
View 7 Replies
View Related
Aug 25, 2005
I have the following query which has been giving me headaches for days : SELECT SCCode [Service Catalog Code], FileName [File Name], FullName [Full Name], FileExtension [Extension], FileSize [Size], Author [Author], CONVERT(VARCHAR(50),CAST(LastModified AS SMALLDATETIME), 120) [Last Modified], CONVERT(VARCHAR(50),CAST(LastAccessed AS SMALLDATETIME), 120) [Last Accessed], TimesAccessed [Downloads], UploadedBy [Uploaded By], CONVERT(VARCHAR(50),CAST(UploadedAt AS SMALLDATETIME), 120) [Uploaded At] FROM #TempTable WHERE id > @firstitem AND id < @lastitem ORDER BY CASE WHEN @sortcolumn = 'Service Catalog Code' THEN SCCode WHEN @sortcolumn = 'File Name' THEN FileName WHEN @sortcolumn = 'Extension' THEN FileExtension WHEN @sortcolumn = 'Size' THEN FileSize WHEN @sortcolumn = 'Author' THEN Author WHEN @sortcolumn = 'Last Modified' THEN CONVERT(VARCHAR(50),CAST(LastModified AS SMALLDATETIME), 120) WHEN @sortcolumn = 'Last Accessed' THEN CONVERT(VARCHAR(50),CAST(LastAccessed AS SMALLDATETIME), 120) WHEN @sortcolumn = 'Downloads' THEN TimesAccessed WHEN @sortcolumn = 'Uploaded By' THEN UploadedBy WHEN @sortcolumn = 'Uploaded At' THEN CONVERT(VARCHAR(50),CAST(UploadedAt AS SMALLDATETIME), 120) END ASCWhen my @sortcolumn parameter is either FileSize (BIGINT) or TimesAccessed (BIGINT) then the query returns the data without any problem. However, if I use a different @sortcolumn value such as "Author" then I keep getting "Error converting data type varchar to bigint."A solution that seems to work is to drop CASE and use lots of IF statements instead. I don't prefer to do this because it requires me to repeat the same select statement for each and every possible @sortcolumn value!Does anyone know how to solve this? Help!
View 2 Replies
View Related
Mar 23, 2006
Hi
I have an insert stored procedure with a parameter @eventDate date type date time. I have written a web form that takes the textbox.text value and assigns to the @eventDate parameter using a querystring. Howevr when I run the application I get a SQL Exception error converting data type nvarchar to datetime.
I have tried dssqlInsertEvent.InsertParameters.add("EventDate", convert.todatetime(txtEventDate.text)); wbut received another error.
Any assistance would be greatly appreciated.
View 4 Replies
View Related
Jul 7, 2004
I'm getting the error Error converting data type DBTYPE_DBTIMESTAMP to datetime when I try to import a date field from Oracle to SQL Server.
SELECT CAST(cancel_dt as datetime) FROM OPENQUERY(orcldb, 'SELECT cancel_dt FROM tablename WHERE id= 12345')
The date in Oracle is 19-JUN-99, but it's coming over as 06/19/0999 and it throws the error because the year 999 is invalid in SQL Server. Any ideas on why Oracle or SQL server would convert the year to 0999 instead of 1999?
This is also happening on a value 24-SEP-07 coming over as 09/24/0207
Most other date values work, so I'd really like to get in depth into the process that occurs when converting to a SQL Server datetime.
View 7 Replies
View Related
Dec 4, 2004
hi
i want to pass a datetime variable from a asp page to MSSQL through a stored procedure, & i get this error:
Microsoft OLE DB Provider for ODBC Drivers (0x80040E07)
[Microsoft][ODBC SQL Server Driver][SQL Server]Error converting data type varchar to datetime.
this is the code that i use in page:
strsql="sp_inventory @timee=' " & RecievedDate & " ' "
also i use this one:
but i still get this error
strsql="sp_inventory @timee=' " & cdate(RecievedDate) & " ' "
this is maybe useful that i get this errot on some PCs, not all the computeres.
sometimes work well, & sth not work.
View 2 Replies
View Related
Dec 22, 2004
Here is the stored procedure
the data type for the column b_trn_tentdte is decimal(8,0).
SET QUOTED_IDENTIFIER ON
GO
SET ANSI_NULLS ON
GO
ALTER Procedure Prc_New_cus_wo_prev_posted
@b_trn_tendte_Beg_Date datetime
,@b_trn_tendte_End_Date datetime
@b_trn_tendte_Beg_Date1 datetime
,@b_trn_tendte_End_Date2 datetime
as
declare @Beg_tentdte datetime
declare @End_tentdte datetime
declare @Beg_tentdte1 datetime
declare @Beg_tentdte2 datetime
set @Beg_tentdte = convert(varchar(10), @b_trn_tendte_Beg_Date, 112)
set @End_tentdte = convert(varchar(10), @b_trn_tendte_End_Date, 112)
set @Beg_tentdte1 = convert(varchar(10), @b_trn_tendte_Beg_Date1, 112)
set @Beg_tentdte2 = convert(varchar(10), @b_trn_tendte_End_Date2, 112)
/* this query looks for customers with posted
transactions but none prior to the date range
in question */
Select distinct b_cus_cname
from
bar_cus_db_rec
,bar_trn_db_rec b
where b.b_trn_instid = ''
and b.b_trn_instid = b_cus_instid
and b.b_trn_actid = b_cus_cusid
and convert(varchar(10), b.b_trn_tentdte) between @Beg_tentdte and @End_tentdte
and not exists (select c.b_trn_actid
from bar_trn_db_rec c
where c.b_trn_instid = b.b_trn_instid
--and c.b_trn_tentdte between 19970901 and 20030229
and convert(varchar(10), c.b_trn_tentdte) between @Beg_tentdte1 and @Beg_tentdte2
and c.b_trn_actid = b.b_trn_actid)
GO
SET QUOTED_IDENTIFIER OFF
GO
SET ANSI_NULLS ON
GO
every time I run the query, I get this error message:
Error converting data type varchar to datetime.
thanks for your assistance.
View 5 Replies
View Related
Oct 17, 2007
Error converting data type varchar to float.
I am getting this error. Any one there to guide me
View 4 Replies
View Related
Jun 21, 2006
An application i am using creates an error.
Using SQL-profiler i catch this statement:
exec sp_executesql N'insert into RECORDING_SCHEDULE (programme_oid, capture_source_oid, filename, status, recording_group, recording_type, manual_channel_oid,
manual_start_time, manual_end_time, quality_level, pre_pad_minutes, post_pad_minutes) values (@P1,@P2,@P3,@P4,@P5,@P6,@P7,@P8,@P9,@P10,@P11,@P1 2)',N'@P1 int,@P2 int,@P3
nvarchar(19),@P4 int,@P5 int,@P6 int,@P7 int,@P8 datetime,@P9 datetime,@P10 int,@P11 int,@P12 int',177748,2,N'Lilla röda traktorn',4,40,5,16,''2006-06-21
17:00:00:000'',''2006-06-21 20:00:00:000'',1,1,2
After removing the double ' around the date and time parts i get the following error when running in QA:
Msg 8114, Level 16, State 5, Line 0
Error converting data type varchar to datetime.
If a remove the time portion it works.
The DDL for the table is:
CREATE TABLE [dbo].[RECORDING_SCHEDULE](
[oid] [int] IDENTITY(1,1) NOT NULL,
[programme_oid] [int] NULL,
[capture_source_oid] [int] NULL,
[status] [smallint] NOT NULL,
[filename] [varchar](255) NULL,
[recording_type] [int] NULL,
[recording_group] [int] NULL,
[manual_start_time] [datetime] NULL,
[manual_end_time] [datetime] NULL,
[manual_channel_oid] [int] NULL,
[quality_level] [int] NULL CONSTRAINT [DF__RECORDING__quali__38996AB5] DEFAULT ((0)),
[pre_pad_minutes] [int] NULL CONSTRAINT [DF__RECORDING__pre_p__398D8EEE] DEFAULT ((0)),
[post_pad_minutes] [int] NULL CONSTRAINT [DF__RECORDING__post___3A81B327] DEFAULT ((0)),
CONSTRAINT [aaaaaRECORDING_SCHEDULE_PK] PRIMARY KEY NONCLUSTERED
What am I missing?
View 2 Replies
View Related
