I have just loaded my db table from an excel file using the import wizard. Prior to the import, I set my data types and in the field that I need a number with 1 decimal place I chose a decimal data type.
Made since to me
However, now my numbers do not have the decimals.
Please help.
So my data is delivered as numeric(9,2)...like 100.00. I have to extract that data and store it as a varchar 0 filled without the decimal place...like 0000010000///I tried the following and it did not work...
RIGHT('000000000'+CONVERT(VARCHAR,[EODPosting].[Amount]),10),
Hi..
I have a column in the data base with the type Float,
I want to limit the number of digits after decimal point to 2 when I display the value in ASP.NET but I don't know how!?
the number that appear after calculation llike "93.333333"
I use decimal(2,2) as data type but an error accour and this is the message
"- Unable to modify table. Arithmetic overflow error converting float to data type numeric.The statement has been terminated."
Can you help me..
thanks
I am creating a table on SQL Server. One of the columns in this new table contains whole integer as wells as decimal values (i.e. 4500 0.9876). I currently have this column defined as Decimal(12,4). This adds 4 digits after the decimal point to the whole integers. Is there a data type that will have the decimal point only for decimal values and no decimal point for the whole integers?
View 2 Replies View RelatedHello!
I would like to cast (convert) data type decimal(24,4) to
decimal(21,4). I could not do this using standard casting function
CAST(@variable as decimal(21,4)) or CONVERT(decimal(21,4),@variable)
because of the following error: "Arithmetic overflow error converting
numeric to data type numeric." Is that because of possible loss of the
value?
Thanks for giving me any advice,
Ziga
Hi,
The table in SQL has column Availability Decimal (8,8)
Code in c# using sqlbulkcopy trying to insert values like 0.0000, 0.9999, 29.999 into the field Availability
we tried the datatype float , but it is converting values to scientific expressions€¦(eg: 8E-05) and the values displayed in reports are scientifc expressions which is not expected
we need to store values as is
Error:
base {System.SystemException} = {"The given value of type SqlDecimal from the data source cannot be converted to type decimal of the specified target column."}
"System.InvalidOperationException: The given value of type SqlDecimal from the data source cannot be converted to type decimal of the specified target column. ---> System.InvalidOperationException: The given value of type SqlDecimal from the data source cannot be converted to type decimal of the specified target column. ---> System.ArgumentException: Parameter value '1.0000' is out of range.
--- End of inner exception stack trace ---
at System.Data.SqlClient.SqlBulkCopy.ConvertValue(Object value, _SqlMetaData metadata)
--- End of inner exception stack trace ---
at System.Data.SqlClient.SqlBulkCopy.ConvertValue(Object value, _SqlMetaData metadata)
at System.Data.SqlClient.SqlBulkCopy.WriteToServerInternal()
at System.Data.SqlClient.SqlBulkCopy.WriteRowSourceToServer(Int32 columnCount)
at System.Data.SqlClient.SqlBulkCopy.WriteToServer(DataTable table, DataRowState rowState)
at System.Data.SqlClient.SqlBulkCopy.WriteToServer(DataTable table)
at MS.Internal.MS
COM.AggregateRealTimeDataToSQL.SqlHelper.InsertDataIntoAppServerAvailPerMinute(String data, String appName, Int32 dateID, Int32 timeID) in C:\VSTS\MXPS Shared Services\RealTimeMonitoring\AggregateRealTimeDataToSQL\SQLHelper.cs:line 269"
Code in C#
SqlBulkCopy bulkCopy = new SqlBulkCopy(sqlConnection, SqlBulkCopyOptions.Default);
DataRow dr;
DataTable dt = new DataTable();
DataColumn dc;
try
{
dc = dt.Columns.Add("Availability", typeof(decimal));
€¦.
dr["Availability"] = Convert.ToDecimal(s[2]); ------ I tried SqlDecimal
€¦€¦€¦.
}
bulkCopy.DestinationTableName = "dbo.[Tbl_Fact_App_Server_AvailPerMinute]";
bulkCopy.WriteToServer(dt);
thx
I have decimal(6,2) defined in a column. If I insert 90.6, it will display 90.60 , 0 becomes .00 .
Is there a way or configuration change so the 0's will on the last will not be showing. And
the 0 will display as 0 not .00?
Thanks in advance.
Hi There,
I'm using C# to get a value for a DOUBLE precision variable, called "Length", from a textBox using the following line:
Length = Convert.ToDouble( txtLength.Text )
I'm also using the following lines to prepare my stored procedure call:
arParms[9] = new SqlParameter("@Length", SqlDbType.Decimal, 5);
arParms[9].Value = record.Length;
My stored procedure has the following parameter definition:
@Length decimal(9,3)
My problem is that if someone types a value bigger than 999999 in the textbox he will get for sure the following error:
System.Data.SqlClient.SqlException: Error converting data type numeric to decimal.
I don't know how to either make sql or C# to truncate the value or catch the exception to automatically assign 0 to the parameter.
Please Help.
Moshe
Hello all,I have an SQL query which retrieves a COUNT number from 2 different tables, and i want to do a division with botht he COUNT data retrieved. Trouble is I can't get it in the format that I want, my SQL query is as below :-SELECT ROUND( ((T1.Present/T2.Total ) * 100), 2) FROM(Select Count(Date) as Present from Attendance WHERE Month(Date)=12 AND Status=1) T1,(Select Count(Date) as Total from Attendance WHERE Month(Date)=12) T2The trouble here is that the result should be as below: T1.Present = 3T2.Total = 5 T1.Present/T2.Total = 3/5 = 0.6The final should be 60 after divided by 100But i am getting a zero as my result, even when I don't multiply the number by 100, the division result is still zero. I am guessing it is a conversion problem. Could anyone please offer me any advise on how to get the final result in the format I want?
View 2 Replies View Related I have calculated values such as ;
OP1: 0,8625OP2: 31OP3: 0,965034965034965OP4: 0,8625OP5: 0,85OP6: 0,931506849315068OP7: 31MOV1 : 9,02903225806451MOV2: 8,68387096774194
I have a SQL database table where I defined all data fields decimal(18,2) for these valuesHere is my code ;
Dim conn As SqlConnection = New SqlConnection("Data Source=SERDARSQLEXPRESS;Initial Catalog=Borsa;Integrated Security=True")Dim sql As String = "UPDATE StockParametre SET OPT1 = @opt1, OPT2 = @opt2, OPT3 = @opt3, OPT4 = @opt4, OPT5 = @opt5, OPT6 = @opt6, OPT7 = @opt7, MOVY = @mov1, MOVD = @mov2 WHERE Stock = @TickerKod"Dim cmd As SqlCommand = New SqlCommand(sql, conn)cmd.Parameters.AddWithValue("@opt1", op1)cmd.Parameters.AddWithValue("@opt2", op2)cmd.Parameters.AddWithValue("@opt3", op3)cmd.Parameters.AddWithValue("@opt4", op4)cmd.Parameters.AddWithValue("@opt5", op5)cmd.Parameters.AddWithValue("@opt6", op6)cmd.Parameters.AddWithValue("@opt7", op7)cmd.Parameters.AddWithValue("@mov1", mov1)cmd.Parameters.AddWithValue("@mov2", mov2)cmd.Parameters.AddWithValue("@TickerKod", TickerKod)
conn.Open()cmd.ExecuteNonQuery()conn.Close()
When I run these code I have the fallowing error..
The incoming tabular data stream (TDS) remote procedure call (RPC) protocol stream is incorrect. Parameter 3 ("@opt1"): The supplied value is not a valid instance of data type float. Check the source data for invalid values. An example of an invalid value is data of numeric type with scale greater than precision..blabla ...I tried
cmd.Parameters.AddWithValue("@opt1", FormatNumber(CDec(op1), 2))
but I have the error
Error converting data type nvarchar to numeric.
Thanks
I am using the statement below to calculate the average scores of the columns. When the result set is returned I would like to have a scale of 2. I am currently returning a scale of 6. What could I do to fix this?
Thanks for you help,
John
SELECT ((CONVERT(decimal(4,2),c2_3) + CONVERT(decimal(4,2),c2_15) +
CONVERT(decimal(4,2),c2_16) + CONVERT(decimal(4,2),c2_17)) / 4 * 100) AS Score_A
FROM dataquestionnaire
WHERE confirmation = '10/1/2001-999-1'
I need to store 256 bit hash (SHA-2 alogrithmn) in one of the table'sprimary key. I would prefer to use numeric data type rather varcharetc.* Decimal datatype range is -10^38 +1 to 10^38 -1. I can split my 256bit hash into two decimal(38, 0) type columns as composite key* I can store the hash as varbinary. I never used it and don't havemuch understanding in terms of query writing complexities and dealingit through ADO (data type etc.)It would be heavy OLTP type of systems with hash based primary keyused in joins for data retrieval as well.Please provide your expert comments on this.RegardsAnil
View 1 Replies View RelatedHow can I convert a field with commas, cents and decimal to a numeric without commas and decimals and cents...?
Sample nvarchar values to desired output (integer whole value, truncated or rounded doesn't matter):
0.00 to 0
14,000.04to 14000
139,234.31to 139234
14,017,300.00to 14017300
Hi all,
I'm trying to update a decimal field with a single decimal number (1.8) the problem i'm having, is that it's rounding the number up (2). I would've thought that a decimal datatype would keep the decimal places correct?
This is quite annoying.. I've been searching around the web for an answer.. To no avail (I'm probably asking the wrong question)
Can someone please point me in the right direction?
I have table with data type decimal (18,2) when i try to load more then 2 decimal it is rounding off
Example 34.456 is rounded with 34.46
I want to store 34.45 only with out round in decimal data type how can i achive this
I have value with data type nvarchar:
total
000000854.00
000000042.00
000000065.17
000000000024
000000000.24
How can i convert to decimal and remove 0 infront? but those with 0.xx would not remove the 0 after the dote.
total
854.00
42.00
65.17
24
0.24
I have a CSV Flat File Source with a Decimal column - but DataPrecision property is grayed out - why?
View 1 Replies View RelatedHappy Friday!
A while since I have posted a question, and this one is probably real easy.
I am trying to store numeric values from a php form in MSSQL 2000 database. However, the columns are set to float and if the value is 1.00, when entered into the table it is saved as 1
If I change the column type to money, the query fails, with an error message of conversion of datatype varchar to datatype money statement terminated.
anybody know what I need to do? do I need to do something in my query to specify that this is NOT varchar data?
I am trying to setup an indicator value for an SSRS report to show green and red values on a report, based on the NRESULT value. The problem I am facing is that I have several different CASE statements that have the same logic, and they are processing just fine. NRESULT is a decimal field, so no conversion should be necessary. I do not know why I am getting the "Arithmetic overflow error converting varchar to data type numeric." error message.
Below is the CASE statement where the error is occurring. It is in the part of the ELSE CASE. The first CASE works just fine when the ELSE CASE is commented out. If I also change the ELSE CASE statement to say "else case when LEFT(NRESULT,1) = '-' then '0'", then it processes fine, too, so it has to be something I am missing something in the check on negative values. I do need the two checks, one for positive and one for negative values, to take place.
case when LEFT(NRESULT,1) <> '-' then --This portion, for checking positive values, of the CASE statement works fine.
CASE WHEN LEFT(ROUND(NRESULT,2),4) between 0.00 and 0.49 THEN '2' --Green
ELSE CASE WHEN LEFT(ROUND(NRESULT,2),4) > 0.49 THEN '0' --Red
ELSE '3' --White
END
END
else case when LEFT(NRESULT,1) = '-' then --This portion, for checking negative values, of the CASE statement is producing the conversion error message.
[code]....
I checked the NRESULT field, and there are not any NULL values in there, either.
in my sql, i want to change a decimal number to percent format number, just so it is convenient for users. for example there is a decimal number 0.98, i want to change it to 98%, how can i complete it?
thks
Hi there!
I'm using a Switch statement in my SQL as follows:
Code:
SELECT symbol,
Switch(timestamp Is Null,Null,
timestamp <= 005959, 0,
timestamp<=235959,23) AS period
INTO averageprice
FROM stocktrades;
Now here's my problem. The Data Type stored in the 'period' field of this new table I've created, dubbed averageprice, is a Text field and I want it to be a Number field. I've tried my best to figure this out and I'm still looking so any helpful hints or solution would be greatly appreciated. Thanks!!!
I have a C# app linked to a SQL db and I need to store it's version number in a table (could be something like 1.2.789) but I cannot find any datatype which allows me to do this.
I could create three fields in the table for each number but I don't want to.
For a field in a database to accept both text and number what 'Data Type' should I be using, i.e. 23t5
View 1 Replies View RelatedI am working with a legacy SQL server database from SQL Server 2000. I noticed that in some places that they use decimal data types, that I would normally think they should be using integer data types. Why is this does anyone know?
Example: AutomobileTypeId (PK, decimal(10,0), not null)
Hello, I heve the code below.
double prix =TextBox1.Text;
And I have SQL SERVER table Products in witch I have a column prix ( Decimal(16,4) )
But if I insert prix on my table products on the field prix. prix does not take the correct value.
For example if TextBox1.Text=19,6 , the value inserted on the field prix in the table will be 20.
Why ?
How can we insert the correct value ?
Hello,How should I create a column to save data with the folowing format 10.10 or 10.20 or 10.30 or 150.30 or 10 or 150.It is basically process step in a diagram flow.I tried with decimal but with 10.10 , it removes automatically the 0.Thanks
View 2 Replies View RelatedHello,
When I declare a VB variable Dim s as Decimal,
I want to cast d like this : 1452,4141,0045,47756544,04
Only with to digits after the ","
How can I perform this
i have 001747254 and 000096710 in column 'price'i want it to display as 17472.54 and 967.10how can i do this in one query?
View 4 Replies View Relatedthere is a column which type is float in a table, i want to set the precision of its value, for example if its value is 10.333888, i want to get its value as 10.33, how to complete it in a select Sql?
thks
This one cost me a solid half hour yesterday. I'm wondering why onearth the default precision for a decimal type is 18,0. Maybe I'mmistaken. A decimal datatype sort of implies that you'd want somethingafter the decimal!Question is, can I set this database-wide? Like all new decimaldatatypes have a precision of 12,6 or something like that? I haven'tseen anything about this in the googling I have done...
View 3 Replies View RelatedHi Experts,
I have an urgent needs.
I want to store null for decimal type to sql server. But I do not know how to do that. I get data from user input. If the user did not enter anything in the textbox, then I want to store null to sql server. I list a piece od code below. I got error in the last line fItemObject.ChargeAmount = null;.
if (!String.IsNullOrEmpty(txtDescription.Text)) myObject.LongDesc = txtLongDesc.Text; else myObject.LongDesc = null;
if (!String.IsNullOrEmpty(txtAmount.Text)) myObject.Amount = Convert.ToDecimal(txtChargeAmount.Text); else myObject.ChargeAmount = null;
// Then I submit the myobject to the sql server.
Thank you very much in adavance!
This problem is strictly an SQL problem, and I am about to lose my mind over it. I have a table named Inventory that has a column named PartialQty which is of type DECIMAL(11,4). I have shortened my query for simplicity, but here it is.
DECLARE @pqty1 DECIMAL(11,4)
SELECT @pqty1 = PartialQty FROM Inventory WHERE InventoryID = @invIDPRINT @pqty1 UPDATE Inventory SET PartialQty = 6.5513 WHERE InventoryID = @invID
SELECT @pqty1 = PartialQty FROM Inventory WHERE InventoryID = @invIDPRINT @pqty1
Before this query is ran, the value in PartialQty is 1.2345. If I run this 2 times in a row, this is the output I get:
RUN 1:
1.2345
(1 row(s) affected)
(1 row(s) affected)
(1 row(s) affected)
(1 row(s) affected)
6.0000
RUN 2:
6.0000
(1 row(s) affected)
6.5513
I don't understand 2 things. One is why the first run displays (1 row(s) affected) 4 times even though there is only one record with that InventoryID.
And the other thing I don't understand is why the first time I run it, it loses all of the values after the decimal point.
Please help,
Scott
I have a table with fields:
Id int
Pay numeric(19,3)
value records:
id pay
1 1.000
2 2.250
3 3.445
4 6.000
I want select of table to form:
id pay
1 1
2 2.25
3 3.445
4 6
if value decimal pay field Greater of zero then
value select= value field
else
delete value decimal and show