Data Type Not Supported Issue.
Dec 4, 2006
EXEC master.dbo.sp_addlinkedserver @server = N'DM', @srvproduct=N'DM Association', @provider=N'MSDMine', @datasrc=N'ray620', @catalog=N'DM Association'
select * from openquery (DM,'SELECT * FROM [Model Association TB].Content where NODE_TYPE = 8;')
Msg 7354, Level 16, State 1, Line 2
The OLE DB provider "MSDMine" for linked server "DM" supplied invalid metadata for column "NODE_DISTRIBUTION". The data type is not supported.I'm getting an error with the metadata. Appreciate any assistance. Thank you in advance.
View 1 Replies
ADVERTISEMENT
Jul 23, 2005
Code page translations are not supported for the text data type. From:1252 To: 950.I would like to know what this message means. I also installed thelanguage packs in advanced settings, Everything is set to English. Mywindows XP computer is XP English. For some reason I cant get an updateto go thru using ADO. like Recordset.UpdateAlthough other routines using .update workAny ideas?
View 6 Replies
View Related
Jul 7, 2015
When I opened the Microsoft SQL Server Management Studio(Administrator), the message below is shown up.
`C:Program FilesMicrosoft SQL Server1 10 ToolsBinnManagementStudioSQLWorkbenchProjectsSSMSEmptySqlProject.ssmssqlproj` cannot be opened because its project type (.ssmssqlproj) is not supported by this version of the application.
To open it, use a version that supports this type of project.
View 0 Replies
View Related
Jun 19, 2007
Hi
I have recently upgraded from SQL 2000 to SQL 2005 and I'm getting the following problem, can you suggest me if this is a issue with SQL 2005 or suggest me an asnwer for this.
Below is the exception from my log file
The cursor type/concurrency combination is not supported.
com.microsoft.sqlserver.jdbc.SQLServerException: The cursor type/concurrency combination is not supported.
at com.microsoft.sqlserver.jdbc.SQLServerException.makeFromDriverError(Unknown Source)
at com.microsoft.sqlserver.jdbc.SQLServerStatement.<init>(Unknown Source)
at com.microsoft.sqlserver.jdbc.SQLServerPreparedStatement.<init>(Unknown Source)
at com.microsoft.sqlserver.jdbc.SQLServerConnection.prepareStatement(Unknown Source)
The following is the piece of code where the problem I'm assuming is happening, how can I correct it.
varStmt1 = varConnection.prepareStatement(varCitationSQL.toString(),ResultSet.TYPE_SCROLL_INSENSITIVE,
ResultSet.CONCUR_UPDATABLE);
Have tried using both JDC v1.1 and 1.2 but of no use.
View 5 Replies
View Related
Dec 16, 2007
Hello,I'm trying to install the SQL Server 2005 Standard edition and while I can easily install the first part of the package, the
document.write(L_LINK_RUNINSTALL_VAR_TEXT)
Server components, tools, Books Online, and samples, when I click
to install the Run the SQL Native Client Installation Wizard it tells me this:This Microsoft sql server native client package is not supported on the current processor type
I have Windows XP64bit with IIS running on 32bit now. Why does it do that and how I can get around it ? :) Thanks.
View 3 Replies
View Related
Jul 23, 2005
Hi all,I have a table called PTRANS with few columns (see create script below).I have created a view on top that this table VwTransaction (See below)I can now run this query without a problem:select * from dbo.VwTransactionwhereAssetNumber = '101001' andTransactionDate <= '7/1/2003'But when I create an index on the PTRANS table using the command below:CREATE INDEX IDX_PTRANS_CHL# ON PTRANS(CHL#)The same query that ran fine before, fails with the error:Server: Msg 242, Level 16, State 3, Line 1The conversion of a char data type to a datetime data type resulted inan out-of-range datetime value.I can run the same query by commeting out the AssetNumber clause and itworks fine. I can also run the query commenting out the TransactionDatecolumn and it works fine. But when I have both the conditions in theWHERE clause, it gives me this error. Dropping the index solves theproblem.Can anyone tell me why an index would cause a query to fail?Thanks a lot in advance,AmirCREATE TABLE [PTRANS] ([CHL#] [varchar] (100) COLLATE SQL_Latin1_General_CP1_CI_AS NULL ,[CHCENT] [numeric](2, 0) NOT NULL ,[CHYYMM] [numeric](4, 0) NOT NULL ,[CHDAY] [numeric](2, 0) NOT NULL ,[CHTC] [char] (2) COLLATE SQL_Latin1_General_CP1_CI_AS NOT NULL) ON [PRIMARY]GOCREATE VIEW dbo.vwTransactionsASSELECT CONVERT(datetime, dbo.udf_AddDashes(REPLICATE('0', 2 -LEN(CHCENT)) + CONVERT(varchar, CHCENT) + REPLICATE('0', 4 -LEN(CHYYMM))+ CONVERT(varchar, CHYYMM) + REPLICATE('0', 2 -LEN(CHDAY)) + CONVERT(varchar, CHDAY)), 20) AS TransactionDate,CHL# AS AssetNumber,CHTC AS TransactionCodeFROM dbo.PTRANSWHERE (CHCENT <> 0) AND (CHTC <> 'RA')*** Sent via Developersdex http://www.developersdex.com ***Don't just participate in USENET...get rewarded for it!
View 1 Replies
View Related
Dec 14, 2005
After testing out the application i write on the local pc. I deploy it to the webserver to test it out. I get this error.
System.Data.SqlClient.SqlException: The conversion of a char data type to a
datetime data type resulted in an out-of-range datetime value.
Notes: all pages that have this error either has a repeater or datagrid which load data when page loading.
At first I thought the problem is with the date, but then I can see
that some other pages that has datagrid ( that has a date field) work
just fine.
anyone having this problem before?? hopefully you guys can help.
Thanks,
View 4 Replies
View Related
Feb 13, 2008
Hi,
I can populate a dataTable with type double (C#) of say '1055.01' however when I save these to the CE3.5 database using a float(CE3.5) I lose the decimal portion. The 'offending' code is:
this.court0TableAdapter1.Update(this.mycourtsDataSet1.Court0);
this.mycourtsDataSet1.AcceptChanges();
this.court0TableAdapter1.Fill(this.mycourtsDataSet1.Court0);
This did not happen with VS2005/CE3.01.
I have tried changing all references to decimal (or money in CE3.5) without luck.
I'm beginning to think that string may be the way to go!!!!!!!
Can someone shed some light on my problem.
Thanks,
Later:
It's necessary to update the datatable adapter as the 3.01 and 3.5 CE are not compatible.
View 4 Replies
View Related
Mar 7, 2007
We have some columns in a table where the date is stored as 19980101 (YYYYMMDD). The data type for this column is NUMBER(8) in Oracle.
I need to copy rows from Oracle to SQL Server using SSIS. I used the Data Conversion transformation editor to change it to DT_DATE, but the rows are not being inserted to the destination.
On Error, If I fail the component, then the error is :
There was an error with input column "ORDER_DATE_CONV" (1191) on input "OLE DB Destination Input" (29). The column status returned was: "Conversion failed because the data value overflowed the specified type.".
Regards
RH
View 3 Replies
View Related
May 13, 2008
Hi, all.
I am trying to create table with following SQL script:
Code Snippet
create table Projects(
ID smallint identity (0, 1) constraint PK_Projects primary key,
Name nvarchar (255) constraint NN_Prj_Name not null,
Creator nvarchar (255),
CreateDate datetime
);
When I execute this script I get following error message:
Error source: SQL Server Compact ADO.NET Data Provider
Error message: Named Constraint is not supported for this type of constraint. [ Constraint Name = NN_Prj_Name ]
I looked in the SQL Server Books Online and saw following:
CREATE TABLE (SQL Server Compact)
...
< column_constraint > ::= [ CONSTRAINT constraint_name ] { [ NULL | NOT NULL ] | [ PRIMARY KEY | UNIQUE ] | REFERENCES ref_table [ ( ref_column ) ] [ ON DELETE { CASCADE | NO ACTION } ] [ ON UPDATE { CASCADE | NO ACTION } ]
As I understand according to documentation named constraints should be supported, however error message says opposite. I can rephrase SQL script by removing named constraint.
Code Snippet
create table Projects(
ID smallint identity (0, 1) constraint PK_Projects primary key,
Name nvarchar (255) not null,
Creator nvarchar (255),
CreateDate datetime
);
This script executes correctly, however I want named constraints and this does not satisfy me.
View 1 Replies
View Related
May 13, 2008
hello all .. I have a form that includes two textboxes (Date and Version) .. When I try to insert the record I get the following error message .. seems that something wrong with my coversion (Data type)"The conversion of a char data type to a datetime data type resulted in an out-of-range datetime value.The statement has been terminated."
in my SQL database I have the date feild as datetime and the version as nvarchar(max)
this is the code in the vb page .. Can you please tell me how to solve this problem?Imports System.Data.SqlClient
Imports system.web.configuration
Partial Class Admin_emag_insert
Inherits System.Web.UI.Page
Protected Sub Page_Load(ByVal sender As Object, ByVal e As System.EventArgs) Handles Me.Load
Record_DateTextBox.Text = DateTime.Now
End Sub
Protected Sub clearButton_Click(ByVal sender As Object, ByVal e As System.EventArgs) Handles clearButton.Click
Me.VersionTextBox.Text = ""
End Sub
Protected Sub addButton_Click(ByVal sender As Object, ByVal e As System.EventArgs) Handles addButton.Click
Dim objConnection As SqlConnection
Dim objDataCommand As SqlCommand
Dim ConnectionString As String
Dim record_date As Date
Dim version As String
Dim emagSQL As String
'save form values in variables
record_date = Record_DateTextBox.Text
version = VersionTextBox.Text
ConnectionString = WebConfigurationManager.ConnectionStrings("HRDBConnectionString").ConnectionString
'Create and open the connection
objConnection = New SqlConnection(ConnectionString)
objConnection.Open()
emagSQL = "Insert into E_Magazine (Record_Date, Version ) " & _
"values('" & record_date & "','" & version & "')"
'Create and execute the command
objDataCommand = New SqlCommand(emagSQL, objConnection)
objDataCommand.ExecuteNonQuery()
objConnection.Close()
AddMessage.Text = "A new emagazine was added successfully"
Me.VersionTextBox.Text = ""
End Sub
End Class
View 10 Replies
View Related
Jul 20, 2005
Hi,I would like to convert a dollar amount ($1,500) to represent Fifteenhundred dollars and 00/100 cents only for SQL reporting purposes. Isthis possible and can I incorporate the statement into an existingleft outer join query.Thanks in advance,Gavin
View 1 Replies
View Related
Sep 12, 2006
Hi,
I have a user defined data type which is called DEmployeeName,
it's length is varchar(20), how do i change it into varchar(30) without droping it?
I'm using SQL server 2005.
Thanks in advance..
View 1 Replies
View Related
Oct 9, 2007
I have a field that is currently stored as the data type nvarchar(10), and all of the data in this field is in the format mm/dd/yyyy or NULL. I want to convert this field to the smalldatetime data type. Is this possible?
I've tried to use cast in the following way, (rsbirthday is the field name, panelists is the table), but to no avail.
SELECT rsbirthday CAST(rsbirthday AS smalldatetime)
FROM panelists
the error returned is "incorrect syntax near 'rsbirthday'.
I'm rather new to all things SQL, so I only have the vaguest idea of what I'm actually doing.
Thanks for the help!
View 10 Replies
View Related
Sep 4, 2001
The error in the subject line "The property 'Use Encryption for Data' is not supported" is encountered when running a DTS package via a job step in SQL Server 7.0. The problem is not encountered when executing the DTS package interactively via Enterprise Manager from my PC. When I view the Advanced Properties of the OLE DB driver from Enterprise Manager on my PC, I notice a Use Encryption for Data Property. When I view the Advanced Properties of the OLE DB driver from Enterprise Manager on the Server, the Use Encryption for Data Property does not appear. Service Pack 3 for SQL 7.0 is installed on both my PC and on the SQL Server. I suspect this Property difference for OLE DB could be related to the fact that I installed Enterprise Manager for SQL 2000 on my PC at one time and then uninstalled. Any ideas how to correct this situation?
View 1 Replies
View Related
Jan 28, 2008
update tblPact_2008_0307 set student_dob = '30/01/1996' where student_rcnumber = 1830when entering update date in format such as ddmmyyyyi know the sql query date format entered should be in mmddyyyy formatis there any way to change the date format entered to ddmmyyyy in sql query?
View 5 Replies
View Related
Jun 18, 2007
I created an Integration Services Package that runs fine from my local computer using BIDS. However when I imported into our SQL Server and try to run it from there I get the following error:
DTS_E_PRODUCTLEVELTOLOW. The product level is insufficient for component "Data Conversion"
We are running SQL Server 2005 Standard Edition 64-bit.
We have integration services installed on the server. Is data conversion something that is not supported on Standard Edition?
Also have a similar message for "Send Mail Task."
Is there anywhere that outlines what features are supported on each version?
View 15 Replies
View Related
Mar 14, 2006
Hi!
I'm trying to import data from an Informix Database to my SQL Server 2005 database with the import/export wizard.
I have an ODBC-connection that works, Access fetches data with no errors. From the wizard I can only choose to use the IBM Informix OLE DB Provider as datasource. As fare as I know the OLE DB Provider is using settings from the ODBC-driver?
In SQL Server 2000 there is a posibillity to choose Other(ODBC provider) as datasource which works against this database. Any ideas how i can use an ODBC-datasource?
If I try to use the IBM Informix OLE DB Provider I get an error message after the first step of the wizard:
Cannot get the supported data types from the database connection "Provider=Ifxoledbc;Password=;Persist Security Info=True;User ID=uid;Data Source=db@server".
------------------------------
ADDITIONAL INFORMATION:
IErrorInfo.GetDescription failed with E_NOINTERFACE(0x80004002).
IErrorInfo.GetDescription failed with E_NOINTERFACE(0x80004002). (System.Data)
------------------------------
Anyone have any experience with this problem? I can't find any information that will solve this, but I have seen several questions about this.
I would be very grateful for some help!
Best Regards
View 6 Replies
View Related
Apr 16, 2008
Hi,
The table in SQL has column Availability Decimal (8,8)
Code in c# using sqlbulkcopy trying to insert values like 0.0000, 0.9999, 29.999 into the field Availability
we tried the datatype float , but it is converting values to scientific expressions€¦(eg: 8E-05) and the values displayed in reports are scientifc expressions which is not expected
we need to store values as is
Error:
base {System.SystemException} = {"The given value of type SqlDecimal from the data source cannot be converted to type decimal of the specified target column."}
"System.InvalidOperationException: The given value of type SqlDecimal from the data source cannot be converted to type decimal of the specified target column. ---> System.InvalidOperationException: The given value of type SqlDecimal from the data source cannot be converted to type decimal of the specified target column. ---> System.ArgumentException: Parameter value '1.0000' is out of range.
--- End of inner exception stack trace ---
at System.Data.SqlClient.SqlBulkCopy.ConvertValue(Object value, _SqlMetaData metadata)
--- End of inner exception stack trace ---
at System.Data.SqlClient.SqlBulkCopy.ConvertValue(Object value, _SqlMetaData metadata)
at System.Data.SqlClient.SqlBulkCopy.WriteToServerInternal()
at System.Data.SqlClient.SqlBulkCopy.WriteRowSourceToServer(Int32 columnCount)
at System.Data.SqlClient.SqlBulkCopy.WriteToServer(DataTable table, DataRowState rowState)
at System.Data.SqlClient.SqlBulkCopy.WriteToServer(DataTable table)
at MS.Internal.MS
COM.AggregateRealTimeDataToSQL.SqlHelper.InsertDataIntoAppServerAvailPerMinute(String data, String appName, Int32 dateID, Int32 timeID) in C:\VSTS\MXPS Shared Services\RealTimeMonitoring\AggregateRealTimeDataToSQL\SQLHelper.cs:line 269"
Code in C#
SqlBulkCopy bulkCopy = new SqlBulkCopy(sqlConnection, SqlBulkCopyOptions.Default);
DataRow dr;
DataTable dt = new DataTable();
DataColumn dc;
try
{
dc = dt.Columns.Add("Availability", typeof(decimal));
€¦.
dr["Availability"] = Convert.ToDecimal(s[2]); ------ I tried SqlDecimal
€¦€¦€¦.
}
bulkCopy.DestinationTableName = "dbo.[Tbl_Fact_App_Server_AvailPerMinute]";
bulkCopy.WriteToServer(dt);
thx
View 8 Replies
View Related
Jul 6, 2006
I am trying to use the Bulk Insert Task to load from a csv file. My final column is a bit that is nullable. My file is an ID column that is int, a date column that is mm/dd/yyy, then 20 columns that are real, and a final column that is bit. I've tried various combinations of codepage and datafiletype on my task component. When I have RAW with Char, I get the error included below. If I change to RAW/Native or codepage 1252, I don't have an issue with the bit; however, errors start generating on the ID and date columns.
I have tried various data type settings on my flat file connection, too. I have tried DT_BOOL and the integer datatypes. Nothing seems to work.
I hope someone can help me work through this.
Thanks in advance,
SK
SSIS package "Package3.dtsx" starting.
Error: 0xC002F304 at Bulk Insert Task, Bulk Insert Task: An error occurred with the following error message: "Cannot fetch a row from OLE DB provider "BULK" for linked server "(null)".The OLE DB provider "BULK" for linked server "(null)" reported an error. The provider did not give any information about the error.The bulk load failed. The column is too long in the data file for row 1, column 24. Verify that the field terminator and row terminator are specified correctly.Bulk load data conversion error (type mismatch or invalid character for the specified codepage) for row 1, column 23 (cancelled).".
Error: 0xC002F304 at Bulk Insert Task 1, Bulk Insert Task: An error occurred with the following error message: "Cannot fetch a row from OLE DB provider "BULK" for linked server "(null)".The OLE DB provider "BULK" for linked server "(null)" reported an error. The provider did not give any information about the error.The bulk load failed. The column is too long in the data file for row 1, column 24. Verify that the field terminator and row terminator are specified correctly.Bulk load data conversion error (type mismatch or invalid character for the specified codepage) for row 1, column 23 (cancelled).".
Task failed: Bulk Insert Task 1
Task failed: Bulk Insert Task
Warning: 0x80019002 at Package3: The Execution method succeeded, but the number of errors raised (2) reached the maximum allowed (1); resulting in failure. This occurs when the number of errors reaches the number specified in MaximumErrorCount. Change the MaximumErrorCount or fix the errors.
SSIS package "Package3.dtsx" finished: Failure.
View 5 Replies
View Related
Apr 19, 2008
Advance thanks ....... My table is TimeSheet:----------------------------------- CREATE TABLE [dbo].[TimeSheet]( [autoid] [int] IDENTITY(1,1) NOT NULL, [UserId] [int] NOT NULL, [starttime] [datetime] NOT NULL, [endtime] [datetime] NOT NULL, [summary] [nvarchar](50) NOT NULL, [description] [nvarchar](50) NULL, [dtOfEntry] [datetime] NOT NULL, [Cancelled] [bit] NULL) ON [PRIMARY] My Query is------------------ insert into timesheet (UserId, StartTime,EndTime, Summary, Description,DtOfEntry) values (2, '19/04/2008 2:05:06 PM', '19/04/2008 2:05:06 PM', '66', '6666','19/04/2008 2:05:06 PM')i m not able to insert value Error Message is-------------------------Msg 242, Level 16, State 3, Line 1The conversion of a char data type to a datetime data type resulted in an out-of-range datetime value.The statement has been terminated. can any body give any solution
View 5 Replies
View Related
Aug 3, 2005
Hey, I have a big problem that i wanna search data from SQL by DateTime like thatselect * from test where recorddate='MyVariableWhichHoldDate'i use variable that holds Date info.i searched a lot infomation on net but there is no perfect solution. i know why this occur but there is no function to solve this problem. i used a lot of ways. it accept yyyy-mm-dd format but my variable format is dd-mm-yyyyy . is there any function for this problem? and any other solution.thanks for ur attentionregards
View 6 Replies
View Related
Mar 30, 2007
I am using Visual Studio 2005 and SQL Express 2005. The database was converted from MS Access 2003 to SQL Express by using the upsize wizard.
I would like to store the current date & time in a column in a table. This column is a smalldatetime column called 'lastlogin'.
The code I'm using is:
Dim sqlcommand As New SqlCommand _
("UPDATE tableXYZ SET Loggedin = 'True', LastLogin = GetDate() WHERE employeeID = '" & intEmployeeID.ToString & "'", conn)
Try
conn.Open()
sqlcommand.ExecuteNonQuery()
conn.Close()
Catch ex As Exception
MessageBox.Show(ex.Message)
End Try
This code works fine on my local machine and local SQL server. However at the client side this code results in the error as mentioned in the subject of this thread. I first used 'datetime.now' instead of 'getdate()', but that caused the same error. Then I changed the code to 'getdate()', but the error still remains.
The server at the client is running Windows Server 2000 UK . My local machiine is running WIndows XP Dutch.
Maybe the conversion from Dutch to UK has something to do with it. But this should be solved by using the 'Getdate()' function..... ?
View 1 Replies
View Related
Oct 20, 2005
I have a DTS that pulls data in from a table in MysQL and inserts it into a tablle in SQL Server. it's failing when I run the step with the "requestd conversion is not supported" error, but when testing each single column copy in the Data Transformation step, it passes.
I just want an exact copy of the data.
the source MySQL table is....
CREATE TABLE `entry` (
`web_id` int(11) NOT NULL auto_increment,
`web_name` varchar(40) NOT NULL default '',
`web_email` varchar(60) NOT NULL default '',
`web_cli` varchar(50) NOT NULL default '',
`web_pu_id` varchar(60) default NULL,
`web_answer` varchar(60) NOT NULL default '',
`web_ddi` varchar(30) default NULL,
`web_time_entered` datetime NOT NULL default '0000-00-00 00:00:00',
`web_ip_address` varchar(20) default NULL,
`web_entry_status` set('failed','success') NOT NULL default '',
`web_polled` enum('true','false') default 'false',
PRIMARY KEY (`web_id`)
) ENGINE=MyISAM;
and the SQl Server destination is....
CREATE TABLE [entry] (
[web_id] [int] NOT NULL ,
[web_name] [varchar] (23) NOT NULL ,
[web_email] [varchar] (37) NOT NULL ,
[web_cli] [varchar] (15) NOT NULL ,
[web_pu_id] [varchar] (15) NULL ,
[web_answer] [text] NOT NULL ,
[web_ddi] [varchar] (11) NULL ,
[web_time_entered] [datetime] NOT NULL ,
[web_ip_address] [varchar] (15) NULL ,
[web_entry_status] [varchar] (15) ,
[web_polled] [varchar] (15) NULL
) ON [PRIMARY] TEXTIMAGE_ON [PRIMARY]
GO
ALTER TABLE [temp_webentry] WITH NOCHECK ADD
CONSTRAINT [PK_tmpwebentry] PRIMARY KEY CLUSTERED
(
[web_id]
) ON [PRIMARY]
GO
sample line of data ...
352711, 'some name', 'email@addre.ss', '0123456789', 'AA_XX-Y-012345-2', '', '098765432', '2005-10-19 23:17:42', '192.168.28.165', 'failed', 'false'
View 1 Replies
View Related
Oct 18, 2007
Hi,
I am trying to delete a row in excel [Sheet1$], where this data in that row is used in a pivot table in same excel [Sheet2$] which should also get deleted, when i try to delete that row using "delete ... from [Sheet1$] " it is throwing an error message "Deleting data in a linked table is not supported by this ISAM. (Microsoft Office Access Database Engine)"
Can you please guide me in overcoming this error...........
Thanks in advance,
Warm Regards,
gchanduu
View 2 Replies
View Related
Jul 23, 2007
I'm trying to use the SSIS Execute SQL Task to pull XML from a SQL 2005 database table. The SQL is of the following form:
SELECT
(
SELECT
MT.MessageId 'MessageId',
MT.MessageType 'MessageType',
FROM MessageTable MT
ORDER BY MT.messageid desc
FOR XML PATH('MessageStatus'), TYPE
)
FOR XML PATH('Report'), TYPE
For some reason I can only get this query to work if I use an ADO.NET connection type. If I try to use something like the OLEDB connection I get the following error:
<ROOT><?MSSQLError HResult="0x80004005" Source="Microsoft XML Extensions to SQL Server" Description="No description provided"?></ROOT>
Can anyone tell me why the SELECT ... FOR XML PATH... seems only to work with ADO.NET connections?
Thanks
Walter
View 1 Replies
View Related
May 13, 2008
Hi all,I have a gridview that bound to a SqlDataSource called SqlDataSourceGridView. I have enabled Edit in my GridView, but I do all the updating in code behind with stored procedure (using onRowUpdating). Now each time when I click "Update", the update went through and all the data got updated, but I received this error: Updating is not supported by data source 'SqlDataSourceGridView' unless UpdateCommand is specified.
Description: An
unhandled exception occurred during the execution of the current web
request. Please review the stack trace for more information about the
error and where it originated in the code.
Exception Details: System.NotSupportedException:
Updating is not supported by data source 'SqlDataSourceGridView' unless
UpdateCommand is specified. What do I need to do to fix this problem?Thanks a lot.
View 6 Replies
View Related
Apr 21, 2015
We migrated the MDS database to a new server (win 2012 & sql 2014). We did this by detaching attaching. After the move, I tried to upgrade the MDS database using the master configuration manager and i am getting the following error. I couldn't find any relevant articles online. "The upgrade from the version of the database is not supported or the sql scripts for the upgrade are misisng".
View 2 Replies
View Related
Aug 18, 2007
I have SQL Server 2005 Developer Edition. And my operating system is Windows Vista.
I have written a procedure in C# and deployed it on SQL Server. However when i try to run it i get the following error.
System.Data.SqlClient.SqlException: The locale identifier (LCID) 16393 is not supported by SQL Server
Also I tried using same procedure in Windows XP machine and it workd fine. Can anyone help me what could be the problem?
View 12 Replies
View Related
Oct 20, 2007
Hi,
I´m exporting an ms-excel file, then I use a lookup transformation to get a field from a SQL Server 2005 table. The Lookup transformation editor, after selecting the table, shows a warning that says:
at least one mapping between a column from available input columns ans a column from available lookup columns must be defined on the columns page.
So I try to make a relationship in the Lookup transformation editor's column tab where I find the Available input columns and the available lookup columns but I get the following error:
The following columns cannot be mapped:
[Department, DEP_CLEGALCODE]
One or more columns do not have supported data types, or their data types do not match.
The field in SLQ Server is varchar(10) and the input field is a derived column transformation; I have tried different Data Types but I always have the same error.
The DataFlow is: ExcelSource --> Derived Column --> Lookup --> Flat file destination
thanks.
View 6 Replies
View Related
Oct 19, 2006
I am trying to put the data from a field in my database into a row in a table using the SQLDataSource.Select statement. I am using the following code: FileBase.SelectCommand = "SELECT Username FROM Files WHERE Filename = '" & myFileInfo.FullName & "'" myDataRow("Username") = CType(FileBase.Select(New DataSourceSelectArguments()), String)But when I run the code, I get the following error:Server Error in '/YorZap' Application. Unable to cast object of type 'System.Data.DataView' to type 'System.String'. Description: An unhandled exception occurred during the execution of the current web request. Please review the stack trace for more information about the error and where it originated in the code. Exception Details: System.InvalidCastException: Unable to cast object of type 'System.Data.DataView' to type 'System.String'.Source Error: Line 54: FileBase.SelectCommand = "SELECT Username FROM Files WHERE Filename = '" & myFileInfo.FullName & "'"
Line 55: 'myDataRow("Username") = CType(FileBase.Select(New DataSourceSelectArguments).GetEnumerator.Current, String)
Line 56: myDataRow("Username") = CType(FileBase.Select(New DataSourceSelectArguments()), String)
Line 57:
Line 58: filesTable.Rows.Add(myDataRow)Source File: D:YorZapdir_list_sort.aspx Line: 56 Stack Trace: [InvalidCastException: Unable to cast object of type 'System.Data.DataView' to type 'System.String'.]
ASP.dir_list_sort_aspx.BindFileDataToGrid(String strSortField) in D:YorZapdir_list_sort.aspx:56
ASP.dir_list_sort_aspx.Page_Load(Object sender, EventArgs e) in D:YorZapdir_list_sort.aspx:7
System.Web.Util.CalliHelper.EventArgFunctionCaller(IntPtr fp, Object o, Object t, EventArgs e) +13
System.Web.Util.CalliEventHandlerDelegateProxy.Callback(Object sender, EventArgs e) +45
System.Web.UI.Control.OnLoad(EventArgs e) +80
System.Web.UI.Control.LoadRecursive() +49
System.Web.UI.Page.ProcessRequestMain(Boolean includeStagesBeforeAsyncPoint, Boolean includeStagesAfterAsyncPoint) +3743
Version Information: Microsoft .NET Framework Version:2.0.50727.42; ASP.NET Version:2.0.50727.210 Please help me!
View 3 Replies
View Related
May 17, 2006
Dear all,
I am stuck with a SSIS package and I can€™t work out. Let me know what steps are the correct in order to solve this.
At first I have just a Flat File Source and then Script Component, nothing else.
Error:
[Script Component [516]] Error: System.InvalidCastException: Unable to cast COM object of type 'System.__ComObject' to class type 'System.Data.SqlClient.SqlConnection'. Instances of types that represent COM components cannot be cast to types that do not represent COM components; however they can be cast to interfaces as long as the underlying COM component supports QueryInterface calls for the IID of the interface. at Microsoft.SqlServer.Dts.Pipeline.ScriptComponentHost.HandleUserException(Exception e) at Microsoft.SqlServer.Dts.Pipeline.ScriptComponentHost.AcquireConnections(Object transaction) at Microsoft.SqlServer.Dts.Pipeline.ManagedComponentHost.HostAcquireConnections(IDTSManagedComponentWrapper90 wrapper, Object transaction)
Script Code (from Script Component):
' Microsoft SQL Server Integration Services user script component
' This is your new script component in Microsoft Visual Basic .NET
' ScriptMain is the entrypoint class for script components
Imports System
Imports System.Data.SqlClient
Imports System.Math
Imports Microsoft.SqlServer.Dts.Pipeline.Wrapper
Imports Microsoft.SqlServer.Dts.Runtime.Wrapper
Public Class ScriptMain
Inherits UserComponent
Dim nDTS As IDTSConnectionManager90
Dim sqlConnecta As SqlConnection
Dim sqlComm As SqlCommand
Dim sqlParam As SqlParameter
Public Overrides Sub Input0_ProcessInputRow(ByVal Row As Input0Buffer)
Dim valorColumna As String
Dim valorColumna10 As Double
valorColumna = Row.Column9.Substring(1, 1)
If valorColumna = "N" Then
valorColumna10 = -1 * CDbl(Row.Column10 / 100)
Else
valorColumna10 = CDbl(Row.Column10 / 100)
End If
Me.Output0Buffer.PORCRETEN = CDbl(Row.Column11 / 100)
Me.Output0Buffer.IMPRETEN = CDbl(Row.Column12 / 100)
Me.Output0Buffer.EJERCICIO = CInt(Row.Column2)
Me.Output0Buffer.CODPROV = CInt(Row.Column7)
Me.Output0Buffer.MODALIDAD = CInt(Row.Column8)
Me.Output0Buffer.NIFPERC = CStr(Row.Column3)
Me.Output0Buffer.NIFREP = CStr(Row.Column4)
Me.Output0Buffer.NOMBRE = CStr(Row.Column6)
Me.Output0Buffer.EJERDEV = CDbl(Row.Column13)
With sqlComm
.Parameters("@Ejercicio").Value = CInt(Row.Column2)
.Parameters("@NIFPerc").Value = CStr(Row.Column3)
.Parameters("@NIFReP").Value = CStr(Row.Column4)
.Parameters("@Nombre").Value = CStr(Row.Column6)
.Parameters("@CodProv").Value = CInt(Row.Column7)
.Parameters("@Modalidad").Value = CInt(Row.Column8)
.Parameters("@ImpBase").Value = valorColumna10
.Parameters("@PorcReten").Value = CDbl(Row.Column11 / 100)
.Parameters("@ImpReten").Value = CDbl(Row.Column12 / 100)
.Parameters("@EjerDev").Value = CDbl(Row.Column13)
.ExecuteNonQuery()
End With
End Sub
Public Overrides Sub AcquireConnections(ByVal Transaction As Object)
Dim nDTS As IDTSConnectionManager90 = Me.Connections.TablaMODELO80
sqlConnecta = CType(nDTS.AcquireConnection(Nothing), SqlConnection)
End Sub
Public Overrides Sub PreExecute()
sqlComm = New SqlCommand("INSERT INTO hac_modelo180(Ejercicio,NIFPerc,NIFReP,Nombre,CodProv,Modalidad,ImpBase,PorcReten,ImpReten,EjerDev) " & _
"VALUES(@Ejercicio,@NIFPerc,@NIFReP,@Nombre,@CodProv,@Modalidad,@ImpBase,@PorcReten,@ImpReten,@EjerDev)", sqlConnecta)
sqlParam = New SqlParameter("@Ejercicio", Data.SqlDbType.SmallInt)
sqlComm.parameters.add(sqlParam)
sqlParam = New SqlParameter("@NIFPerc", Data.SqlDbType.Char)
sqlComm.parameters.add(sqlParam)
sqlParam = New SqlParameter("@NIFReP", Data.SqlDbType.Char)
sqlComm.parameters.add(sqlParam)
sqlParam = New SqlParameter("@Nombre", Data.SqlDbType.VarChar)
sqlComm.parameters.add(sqlParam)
sqlParam = New SqlParameter("@CodProv", Data.SqlDbType.TinyInt)
sqlComm.parameters.add(sqlParam)
sqlParam = New SqlParameter("@Modalidad", Data.SqlDbType.SmallInt)
sqlComm.parameters.add(sqlParam)
sqlParam = New SqlParameter("@ImpBase", Data.SqlDbType.Decimal)
sqlComm.parameters.add(sqlParam)
sqlParam = New SqlParameter("@PorcReten", Data.SqlDbType.Decimal)
sqlComm.parameters.add(sqlParam)
sqlParam = New SqlParameter("@ImpReten", Data.SqlDbType.Decimal)
sqlComm.parameters.add(sqlParam)
sqlParam = New SqlParameter("@EjerDev", Data.SqlDbType.Decimal)
sqlComm.Parameters.Add(sqlParam)
End Sub
Public Sub New()
End Sub
Public Overrides Sub ReleaseConnections()
nDts.ReleaseConnection(sqlConnecta)
End Sub
Protected Overrides Sub Finalize()
MyBase.Finalize()
End Sub
End Class
Thanks a lot for your help
View 13 Replies
View Related
Apr 23, 2007
I get the following message in the vs2005 querybuilder when i do a preview:
***********************************
SQL Execution Error.
Executed SQL statement: SELECT Schoolindex, Variant, VVSchool, [index], indincl, VVRuimtes, School FROM School WHERE (Schoolindex = @PARAM1)
Error Source: SQL Server Compact Edition ADO.NET Data Provider
Error Message: @PARAM1 : Unable to cast object of type 'System.Data.SqlTypes.SqlInt32 to type System.IConvertable'.
****************************************
The same querypreview works fine without the parameter:
SELECT Schoolindex, Variant, VVSchool, [index], indincl, VVRuimtes, School FROM School WHERE (Schoolindex = 186)
Can anybody tell me why this is?
And tell me a way to get the tableadapter working?
Anne-Jan Tuinstra
View 3 Replies
View Related
