I'm using an SSIS under SQL 2005; i transfer data with a DataFlow Component:
DataSource = OLEDB Source;
Destination = OLEDB Destination
The source is a View returning about 100000 records; if i execute it in query analyser it takes few seconds. But if i use it as DataPump Source it takes HOURS to execute it...
I've noticed that If i modify the SELECT query inserting a "TOP 10000000000", it takes few seconds..
Why? Am i missing something?
Hello all,
I've spent quite a few hours on this one... I've successfully gotten tables to datapump between source and destination datbases, however... I get the following message when I hit a table with a blob field:
Step 2 failed, error: x80040E21, x80040000 + 3617
General error -2147217887 (80040E21). (Microsoft Data Transformation Services (DTS) Data Pump (80040e21): Cannot instantiate Storage Object for source column 6 ('description') Blob data. Your provider may require that all Blob columns be rightmost in the source result set.) (Microsoft OLE DB Provider for ODBC Drivers (80040e21): Errors occurred)
I've written a VB com dll that does a simple datapump... but am stuck on this "Storage Object" instantiation thingy...
Any recommendations as to what I can put in my datapump object to allow just a simple xfer of blob types?
Thanks...
- Ed
edh@americanid.com
Hi,
I get this error when I execute a job calling a dts pkg. The package itself is fine and executes without any error.It's transferring around 400000 records. Shceduling the pkg gives the following error.
Can any body led a hand please?
DTSStep_DTSDataPumpTask_1 DTSRun OnProgress: DTSStep_DTSDataPumpTask_1; 1000 Rows have been transformed or copied.; PercentComplete = 0; ProgressCount = 1000 DTSRun OnProgress: DTSStep_DTSDataPumpTask_1; 2000 Rows have been transformed or copied.; PercentComplete = 0; ProgressCount = 2000 DTSRun OnProgress: DTSStep_DTSDataPumpTask_1; 3000 Rows have been transformed or copied.; PercentComplete = 0; ProgressCount = 3000 DTSRun OnProgre... Process Exit Code 1. The step failed.
Thanks in advance
Barath M
Hi,
On my MS SQL Server 2000, I am trying to create a generic way to load tables into my datawarehouse.
I have as input to the process a large number of table definition(s) stored individually as files on my server. And, ascii delimited data files in various locations but mostly accessible via NFS mounts.
I created two DTS package in MSSQL2K that in theory represents what I want to do:
package1
... invoke package2 with global variables to load a system of related tables
package2
... check for a trigger file
... set the "Execute SQL Task" statement to my first file
... run the "Execute SQL Task" which drop/add's a table
... set a "Connection" to a data source file that I want to use
... run the transformation
and, with that my package starts to fall apart
... set the "Execute SQL Task" statement to the next file, and
...... goback and execute it
I can't figure out how to set the table in the transformation section to the table I want to use. And, I assume next to have the transformations links between the source and new table relinked.
The source files contain in the first row the column names as found in the tables I just created.
thanks,
Dave Rowsome
Wether I'm trying to access a datapump task in an imported package in SSIS, or in 2000 enterprise manager
they crash once created. I can not alter or redo mappings or anything else.
After enterprise manager churns for 5-10 min it crashes.
SSIS partially crashes: Attempted to read or write protected memory. This is often an indication that other memory is corrupt. After this I can no longer click on anything and have to end task on Visual studio.
I can do a disconnected edit on the package in enterprise manager and alter the statement, but as far as I know you can't really change much as far as mappings back in there.
This also means that my 2000 packages have been limited to 1 teradata pump per package.
This happened on my laptop, 2 coworker's desktops, and now that i've migrated to a new high end developer box it's happening on it also.
Any feedback/ideas?
I am scripting a DTS Package using VB. The problem I am having is that I get the following error when I execute the package from Visual Basic:
Step Error Source: Microsoft Data Transformation Services Flat File Rowset Provider
Step Error Description:Incomplete file format information - file cannot be opened.
In the DTS Designer when I open the DataPump Transformation and click on the Destination tab I am prompted With the Define Columns dialog. I define the columns and click execute. The package works properly after doing this when executed from Enterprise Manager. Does anyone know how to script the file definition creation??? I have searched high and low through BOL and other resources and am not finding anything. I doesn't seem like it should be this hard to figure out so, maybe I am missing something.
I want to export to a Text File (destination) from a SQL query using a DTS DataPump Task. My query has 28 columns, some how when I try to define the destination columns for my text file the Microsoft Managment Console Crashes completely.
I tough may be my query has two many columns only to find out that it has one to many. If I ramove a column form my query, any column. I get no error at all.
żIs there a limit to a Text File destination connection?
1. Use mssql server agent service to take the schedule
2. Use a .NET windows service with timers to call SqlClientConnection
above, which way would be faster and get a better performance?
Hello Everyone,I have a very complex performance issue with our production database.Here's the scenario. We have a production webserver server and adevelopment web server. Both are running SQL Server 2000.I encounted various performance issues with the production server with aparticular query. It would take approximately 22 seconds to return 100rows, thats about 0.22 seconds per row. Note: I ran the query in singleuser mode. So I tested the query on the Development server by taking abackup (.dmp) of the database and moving it onto the dev server. I ranthe same query and found that it ran in less than a second.I took a look at the query execution plan and I found that they we'rethe exact same in both cases.Then I took a look at the various index's, and again I found nodifferences in the table indices.If both databases are identical, I'm assumeing that the issue is relatedto some external hardware issue like: disk space, memory etc. Or couldit be OS software related issues, like service packs, SQL Serverconfiguations etc.Here's what I've done to rule out some obvious hardware issues on theprod server:1. Moved all extraneous files to a secondary harddrive to free up spaceon the primary harddrive. There is 55gb's of free space on the disk.2. Applied SQL Server SP4 service packs3. Defragmented the primary harddrive4. Applied all Windows Server 2003 updatesHere is the prod servers system specs:2x Intel Xeon 2.67GHZTotal Physical Memory 2GB, Available Physical Memory 815MBWindows Server 2003 SE /w SP1Here is the dev serers system specs:2x Intel Xeon 2.80GHz2GB DDR2-SDRAMWindows Server 2003 SE /w SP1I'm not sure what else to do, the query performance is an order ofmagnitude difference and I can't explain it. To me its is a hardware oroperating system related issue.Any Ideas would help me greatly!Thanks,Brian T*** Sent via Developersdex http://www.developersdex.com ***
View 2 Replies View RelatedHello Everyone,I have a very complex performance issue with our production database.Here's the scenario. We have a production webserver server and adevelopment web server. Both are running SQL Server 2000.I encounted various performance issues with the production server witha particular query. It would take approximately 22 seconds to return100 rows, thats about 0.22 seconds per row. Note: I ran the query insingle user mode. So I tested the query on the Development server bytaking a backup (.dmp) of the database and moving it onto the devserver. I ran the same query and found that it ran in less than asecond.I took a look at the query execution plan and I found that they we'rethe exact same in both cases.Then I took a look at the various index's, and again I found nodifferences in the table indices.If both databases are identical, I'm assumeing that the issue isrelated to some external hardware issue like: disk space, memory etc.Or could it be OS software related issues, like service packs, SQLServer configuations etc.Here's what I've done to rule out some obvious hardware issues on theprod server:1. Moved all extraneous files to a secondary harddrive to free up spaceon the primary harddrive. There is 55gb's of free space on the disk.2. Applied SQL Server SP4 service packs3. Defragmented the primary harddrive4. Applied all Windows Server 2003 updatesHere is the prod servers system specs:2x Intel Xeon 2.67GHZTotal Physical Memory 2GB, Available Physical Memory 815MBWindows Server 2003 SE /w SP1Here is the dev serers system specs:2x Intel Xeon 2.80GHz2GB DDR2-SDRAMWindows Server 2003 SE /w SP1I'm not sure what else to do, the query performance is an order ofmagnitude difference and I can't explain it. To me its is a hardware oroperating systemrelated issue.Any Ideas would help me greatly!Thanks,Brian T
View 2 Replies View RelatedWe have the same application installed on a few different environments with similar servers and similar hardward. The only difference is the versions of SQL and the colations.
Is SQL 2005 a lot faster that SQL 2000? Could colation type make a big effect on performance?
ScAndal
HiI want to insert 1000s of records into SQL Server 2005 Database with some manipulation. So that i put into the For Loop and inserting record.Inside the loop i am opening the connection and closing after use. The sample code is belowfor(int i=0;i<1000;i++){ sqlCmd.CommandText = "ProcName"; sqlCmd.Connection = sqlCon; sqlCmd.Connection.Open(): sqlCmd.ExecuteNonQuery(); sqlCmd.Connection.Close(); } What my Question is.. How is the Performance of this Code..?? Will is take time to get the Connection and Close the Connection in every itration?Or Shall I Open the Connection in Begining of the outside loop and close the connection at end of the Loop? will it increase the Performace?Please clarify me these question.. Thanks in advance.
View 1 Replies View RelatedI have a following problem with SQL performance:
this line 'select * from [viewUserLatestFee]' executes instantly (in Query Analiser)
this line 'select * from [viewUserLatestFee] where orgID = 1' takes up to 30 seconds for 1000 rows (still in Query analiser)
can anyone please help - I seem to have ran out of ideas
I have a feeling people might be curious about the view so here it is:
SELECT dbo.viewUserPosition.id, dbo.viewUserPosition.username, dbo.viewUserPosition.password, dbo.viewUserPosition.title,
dbo.viewUserPosition.firstName, dbo.viewUserPosition.lastName, dbo.viewUserPosition.email, dbo.viewUserPosition.address1,
dbo.viewUserPosition.address2, dbo.viewUserPosition.suburb, dbo.viewUserPosition.postcode, dbo.viewUserPosition.country,
dbo.viewUserPosition.state, dbo.viewUserPosition.mailAddress1, dbo.viewUserPosition.mailAddress2, dbo.viewUserPosition.mailSuburb,
dbo.viewUserPosition.mailPostcode, dbo.viewUserPosition.mailCountry, dbo.viewUserPosition.mailState, dbo.viewUserPosition.birthDate,
dbo.viewUserPosition.joinDate, dbo.viewUserPosition.lastUpdated, dbo.viewUserPosition.orgID, dbo.viewUserPosition.positionID,
dbo.viewLatestPaidFee.feeID, dbo.viewLatestPaidFee.mshipID, dbo.viewLatestPaidFee.name, dbo.viewLatestPaidFee.[desc],
dbo.viewLatestPaidFee.terms, dbo.viewLatestPaidFee.period, dbo.viewLatestPaidFee.periodType, dbo.viewLatestPaidFee.fee,
dbo.viewLatestPaidFee.startDate, dbo.viewLatestPaidFee.endDate, dbo.viewLatestPaidFee.deleted, dbo.viewLatestPaidFee.feePaidID,
dbo.viewLatestPaidFee.paidDate, dbo.viewLatestPaidFee.effectiveDate, dbo.viewLatestPaidFee.approved, dbo.viewLatestPaidFee.optionID,
dbo.viewLatestPaidFee.paidAmount, dbo.viewLatestPaidFee.feePaidEndDate
FROM dbo.viewUserPosition LEFT OUTER JOIN
dbo.viewLatestPaidFee ON dbo.viewUserPosition.id = dbo.viewLatestPaidFee.userID
Here is viewUserPosition:
SELECT dbo.tblUser.id, dbo.tblUser.username, dbo.tblUser.password, dbo.tblUser.title, dbo.tblUser.firstName, dbo.tblUser.lastName, dbo.tblUser.email,
dbo.tblUser.address1, dbo.tblUser.address2, dbo.tblUser.suburb, dbo.tblUser.postcode, dbo.tblUser.country, dbo.tblUser.state,
dbo.tblUser.mailAddress1, dbo.tblUser.mailAddress2, dbo.tblUser.mailSuburb, dbo.tblUser.mailPostcode, dbo.tblUser.mailCountry,
dbo.tblUser.mailState, dbo.tblUser.birthDate, dbo.tblUser.joinDate, dbo.tblUser.lastUpdated, dbo.tblRelPosition.orgID,
dbo.tblRelPosition.positionID
FROM dbo.tblUser INNER JOIN
dbo.tblRelPosition ON dbo.tblUser.id = dbo.tblRelPosition.userID
and viewLatestPaidFee:
SELECT dbo.tblMshipFee.id AS feeID, dbo.tblMshipFee.mshipID, dbo.tblMshipFee.name, dbo.tblMshipFee.[desc], dbo.tblMshipFee.terms,
dbo.tblMshipFee.period, dbo.tblMshipFee.periodType, dbo.tblMshipFee.fee, dbo.tblMshipFee.startDate, dbo.tblMshipFee.endDate,
dbo.tblMshipFee.deleted, fp.id AS feePaidID, fp.paidDate, fp.effectiveDate, fp.approved, fp.optionID, fp.paidAmount, fp.endDate AS feePaidEndDate,
fp.userID
FROM dbo.tblRelMshipFeePaid fp INNER JOIN
dbo.tblMshipFee ON dbo.tblMshipFee.id = fp.feeID AND fp.endDate =
(SELECT MAX(fp2.[endDate])
FROM [dbo].[tblRelMshipFeePaid] fp2
WHERE fp2.[userID] = fp.[userID])
We used a stored proc to pull totals from a database. Everything was fine until the table grew and started to time out. So we created a temp table to populate with a range of data and then pull the totals from there. Everything was fine until the table grew and started to time out. Any suggestion?
View 3 Replies View RelatedHi,
I am newly joined as SQL DBA. I want to check the Physical disk Performance. we have RAID 5 with 5+1 disks. I calculated NO Of IO's Per Disk. But how do we know what is actual limit of IO's per disk.
Thanks
Praveen
What's my best bet in getting better performance out of one of my database servers? Currently we have 1 set of Raid5 disks partitioned into 2 drives. This houses everything (system, database, and logs) If that server has 2 slots left for drives I was thinking of putting 2 mirrored drives and getting the logs off the main database space? (Make sense?) This is a vendored application so working with new indexes etc. isn't something I should do wo/ the vendor's interaction. Will what I describe above help?
Thanks
hi,
i am using to move data from oracle to oracle.
i have used stored procedure in oracle for the update/insert .
the dts calls the stored procedure for each record, due to this the performance has gone down. how do i increase the speed of data xfer.
has any one done any thing similar ?
Tushar
We have SQL Server running on a dual processor Pentium 500mhz server. Our database is hit by about 300 users. 200 of those users are doing constant searches though a client table of about 250,000 records, which in turn is linked to a history table containing over 5,000,000 records. This is only the tip of the iceberg, we have many triggers, procedures, updates, etc. going in the background. The database has over 500 tables.
Keep in mind, these searches that are taking place can involve all kinds of fields: phone number, company name, fax number, first name, last name, status, wildcard searches, etc. So as you can imagine, the database is being hit with all kinds of funky requests to find records. I will be the first to admit that our developers (vendor) are not the best code writers, and we have a tough time getting them to optimize something they do not even understand themselves.
As I speak, our processor utilization is maxing out between 95 to 100 percent. I've done a lot of performance tuning and all of the problems lie in the searching. We've built, tested, rebuilt, re-tested each and every index. I even used the Profiler to filter what I could. It has improved, but our database is growing at a rate of 10 megs a day (already close to 3 gigs, not that huge). I think I've optimized my indexes as best as I can considering all the fields and possibilities available to users to search for records.
For a database that requires all of these different search criteria, what would be a more optimal server? We are looking to purchase something ASAP. I could really use help from someone in a similar situation. It seems odd, in mind, that a company of 300 people would need to rely on a quad server (four processor capability.).
Thanks. JT
HI
I have 700 to 900 mb of production database , 2 gb of ram , 30 gb hard disk,
My production machine is runnng very slow , i have check everything memory,
page/sec, catch hit ratin , dbcc dbreindex but still it performance is not up to the mark.
If i stop SQL SERVER & restart for few days machine works fine but after that
again same thing it work very slow, what could be the reason
if any one had any solution please suggest.
Thanks
Nil
Hi friends,
My company has aution web site, it is written in Java and all sql statements generated dynamically. No stored procedures used. If 30 users uses this site it is OK but if around 300 users uses then the site becomes very slow(almost dead) and developers saying that database is the bottle neck. Please help me in this problem how can I check and overcome this problem.
Thanks
dindu
I am running a SQL 7.0 server on a two processor machine. We are having some performance issues.
one of the processor is always above 90% utilization but the second is barely at 50%.
Will adding another processor help or are the processes locked to one processor.
The server is a dedicated sql server. nothing else is running on it.
Thanks for any info you can provide.
Pierre
Hi,
What I have to do to determine which is the capacity (transactions / sec) of MS SQL Server 7.0 on a specific hardware configuration?
Thank you,
Sebastian Bologescu
We have recently upgraded to SQL 7.0 on NT 4.0/sp6 box which has got 4 PIII 700 processors, 1GB RAM, and 70GB HDD on RAID 1 and RAID 5. We feel that the application performance is not great as expected in SS7. (The application was running in 6.5 smoothly and performance was good)
Is there any option needs to set to improve performance? Now, SS 7 using all the 4 processors and dynamically allocated memory, etc. Any thoughts greatly appreciated.
Thanks in Advance
Jaya
I'm running MS SQL Server on a 1.4 GHz AMD Athlon Processor with 750 MB or RAM and ample disk space. I have a table with 14 columns; 2 datetime, 8 int and the rest are varchar of various sizes less than 13.
I run a java process on another machine that connects to the database and insert records. It takes about 6 minutes to insert 100,000 records.
I run the xp performance monitor and only about 25% of the SQL Server machine's cpu is being used. I run top on the Linux box running java and I see about the same results. Neither machine is kept busy processing. Why don't I get better performance? Could my local area network be that slow? How many inserts per minutes is good performance?
Thanks for your input.
Does anyone know the performance differences between returning data from SQL Server as XML vs. as a record set? We are about to dive into the For XML world full force, but we wanted to make sure that we are not heading for a performance nightmare.
Thanks for any insight on this. I'll try to look for white papers and do some testing in the meantime.
I ave the following Code in my Stored procedure.
Declare Cursor for table A
WHILE @@FETCH_STATUS = 0
Get values from other function based on some business logic.
INSERT Into another table B
(or)
UPDATE to another table B
END
I have to insert/update values to table B, one by one row. So, it is taking more time.
Is there any way to collect the values into a temporary storage and Insert/update or Move the values to table B.
1. where do we see the buffer cache hit ratio. can we set the buffer catche hit ratio manually.
2.In query execution plan we execute the query for performance issue.which parameters we check to take an action?
I have a small doubt. If we keep our data files and log files on sepertate disks how this can improve the database performance.
View 2 Replies View RelatedHello,
I build a query in SQL-server 2000 but i'm not happy with the performance, it takes about 15 minutes to execute the query (4 min INSERT and 11 min UPDATE). The table tbl_total has 3 million records and an index on Contract and Item, the table contracts has 1 million records and a key on Contract and Item.
How can I speed up this query, is it for example possible to put an index on @table (internal table)?
Thanx in advance!
DECLARE @table TABLE (Contract nvarchar(15), Item nvarchar(12), Change_date datetime)
INSERT INTO @table
SELECT TOT.Contract, TOT.Item, MAX(TOT.Change_date)
FROM tbl_total TOT
WHERE EXISTS (SELECT 'X' FROM contracts CONT
WHERE TOT.Contract = CONT.Contract
AND TOT.Item = CONT.Item)
GROUP BY TOT.Contract, TOT.Item
UPDATE contracts
SET contracts.Change_date = TT.Change_date
FROM contracts INNER JOIN @table TT On
contracts.Contract = TT.Contract AND
contracts.Item = TT.Item
Hi
I wanted to find out which is faster in terms of performance:
e.g.
select * from orders where orderRef = '00093'
Or
select * from orders where orderRef like '00093'
I know there is a differnece if i use the wild cards % etc in the results but i wanted to find out with regards to the queries above?
For performance should we index on primary key & data in table in the same file group or different file group (same or different drive) ?
Thanks,
Andy
i need help in gaining the performance of this query
SELECT
tblSuperClientFile.ClientRefNo,
tblReferral.RefID,
tblRail.RailDescr,
tblReferral.SuperClientVendorID,
tblVendor.VendorName AS Client,
tblReferral.AssignedVendorID,
tblReferral.ReferralDate,
tblSpikeDate.DateCompleted AS PlanRevCompleted,
tblReferral.CloseDate,
tblCloseReason.CloseReason,
tblBankruptcyInfo.BK_Filing_State,
tblBankruptcyInfo.BK_Case_Number
INTO #PlanRev
FROM FNFBSDataMart.dbo.tblSpikeDate tblSpikeDate WITH (NOLOCK)
INNER JOIN #ActiveBK
ON tblSpikeDate.MasterID = #ActiveBK.MasterID
AND tblSpikeDate.FID = 3160
AND tblSpikeDate.DateCompleted <= GetDate()-5
INNER JOIN FNFBSDataMart.dbo.tblReferral tblReferral WITH (NOLOCK)
ON tblReferral.RefID = tblSpikeDate.RefID
AND tblReferral.ReferralDate >= GetDate()-180
AND tblReferral.AssignedVendorID NOT IN (188,1721)
INNER JOIN FNFBSDataMart.dbo.tblBankruptcyInfo tblBankruptcyInfo WITH (NOLOCK)
ON tblReferral.RefID = tblBankruptcyInfo.RefID
AND #ActiveBK.bk_Case_Number = tblBankruptcyInfo.bk_Case_Number
INNER JOIN FNFBSDataMart.dbo.tblSuperClientFile tblSuperClientFile WITH (NOLOCK)
ON tblReferral.ClientFileID = tblSuperClientFile.ClientFileID
AND tblSuperClientFile.SuperClientVendorID IN (1816,125,127,1706,766,1820,137,141,144,145,1593,1808,146,990,1745,149,1215,1854,1867)
INNER JOIN FNFBSDataMart.dbo.tblRail tblRail WITH (NOLOCK)
ON tblReferral.RailID = tblRail.RailID
INNER JOIN FNFBSDataMart.dbo.tblVendor tblVendor WITH (NOLOCK)
ON tblReferral.SuperClientVendorID = tblVendor.VendorID
INNER JOIN FNFBSDataMart.dbo.tlkpState tlkpState WITH (NOLOCK)
ON tblSuperClientFile.StateID = tlkpState.StateID
AND (tblSuperClientFile.SuperClientVendorID <> 1820
OR tlkpState.Abbrev NOT IN ('AZ','AK','CA','HI','ID','NV','OR','TX','UT','WA'))
LEFT OUTER JOIN FNFBSDataMart.dbo.tblCloseReason tblCloseReason WITH (NOLOCK)
ON tblReferral.CloseReaID = tblCloseReason.CloseReaID
can anyone have a look at it and give me a feed back asap
This:SELECT MAX(TheDate) FROM MyTableor this:SELECT TOP 1 TheDate FROM MyTable ORDER BY TheDate DESCAs a follow up question to save me having to post, if I want a differentfield from the result set of a MAX query, how do I do it? ie. I want the"Condition" field of the record with the most recent date. I have beendoing it like this:SELECT TOP 1 Condition FROM MyTable ORDER BY TheDate DESCbut if MAX(TheDate) is quicker, I would like to SELECT TOP 1 Condition ....where TheDate is the max date...... Hope this makes sense.....Basically, I'm going to be performing this query nested inside another queryand I want the maximum performance possible (indexes are a differentquestion), which means trying to avoid table scans....
View 2 Replies View Related