Database Crashed?
Nov 14, 2007
Hi,
I'm unsure what happened, but I'm using SQL Server 05 Developer Edition. I've been working with a local database where I tried to add a clustered index on a huge table (about 50M records). Well, I had to stop the query since it was maxing out my work computer. Since then, I've been unable to open the database or run queries against it.
When I open SQL Server Management Studio the database says In Recovery. Once it's done, when I try to expand tables, I eventually get this error:
TITLE: Microsoft SQL Server Management Studio
------------------------------
Failed to retrieve data for this request. (Microsoft.SqlServer.SmoEnum)
For help, click: http://go.microsoft.com/fwlink?ProdName=Microsoft+SQL+Server&LinkId=20476
------------------------------
ADDITIONAL INFORMATION:
Lock request time out period exceeded. (Microsoft SQL Server, Error: 1222)
For help, click: http://go.microsoft.com/fwlink?ProdName=Microsoft+SQL+Server&ProdVer=09.00.1399&EvtSrc=MSSQLServer&EvtID=1222&LinkId=20476
------------------------------
BUTTONS:
OK
------------------------------
If I run a Select * from INFORMATION_SCHEMA.TABLES query, it will go on for a while
If I try to access the properties of the Database (right clicking), I get this error:
TITLE: Microsoft SQL Server Management Studio
------------------------------
Cannot show requested dialog.
------------------------------
ADDITIONAL INFORMATION:
Cannot show requested dialog. (SqlMgmt)
------------------------------
An exception occurred while executing a Transact-SQL statement or batch. (Microsoft.SqlServer.ConnectionInfo)
------------------------------
Lock request time out period exceeded. (Microsoft SQL Server, Error: 1222)
For help, click: http://go.microsoft.com/fwlink?ProdName=Microsoft+SQL+Server&ProdVer=09.00.1399&EvtSrc=MSSQLServer&EvtID=1222&LinkId=20476
------------------------------
BUTTONS:
OK
------------------------------
I'm unsure where to go from this point forward.
View 7 Replies
ADVERTISEMENT
Jan 24, 2007
Bill writes "Our SQL server crashed hard and now we can not get the mdf to attached without a bunch of errors in most of the tables. Any suggestions on a third party tool to fix the problem would be helpful. I had an engineer from Microsoft try to recover the database with no luck. So far I have found these third party tools Red Gate SQL Log Rescue, Lumigent Log Explorer for SQL Server, ApexSQL, and MSSQLRecovery. Oh yes, the backups or lack of backups are bad too. Anyone have any ideas?"
View 1 Replies
View Related
Mar 26, 2007
I was altering a few columns (setting to allow nulls) on a large table (30+ million records) and the machine naturally crashed. I rebooted, and now I can't connect to the DB - enterprise manager hangs, and query analyzer times out. is it likely the whole DB is screwed up, assuming the table alteration was incomplete?
thankfully, I do have a backup, but for future reference, is there a preferred way to make changes to large tables? last time I did this it took over an hour, and enterprise manager gives no progress indication to make me feel more comfortable that it's actually doing something...
View 3 Replies
View Related
Mar 2, 1999
Hi, Everyone:
We have two Domain T1&T2 that trusted each other's; one of SQL server of domain T2 has crashed. We rebuilt NT and SQL ver.6.5 with the same nameon the server of T2; we have the problem that crash server couldn't publish table to another server of T1. We got the error message:
08004(Microsoft)(ODBC SQL Server Driver)(SQL Server) Login failed-User:
T2_sqlexec Reason: Not defined as a valid user of a trusted SQL Server
connection.
We hope to get any help!! Thanks.
View 2 Replies
View Related
May 6, 2008
Hi, i have a corrupt installation of SQL 7, so i am trying to attach the db's from that server to another, only it is not working. Is this soemthing that should be able to be done?
error message i get is:
Server: Msg 823, Level 24, State 1, Line 1
I/O error (bad page ID) detected during read of BUF pointer = 0x1159b2c0, page ptr = 0x205b6000, pageid = (0x1:0x9), dbid = 6, status = 0x801, file = C:MSSQL7Datacasenotes_Data.mdf.
Connection Broken
any help would be greatly appreciated.
View 13 Replies
View Related
Jan 5, 2006
Hi
I am using server 2000 , I question is - if server crashed then can we recover data.. how?
thanks
asm
View 4 Replies
View Related
Jul 26, 2007
Hello,
i've got MS Windows Server 2003 OS (RAID 10) and MS SQL 2005, however server crashed with "blue death" screen. After forced reset, SQL server marked my db as a SUSPECT. Tried DBCC CHECKDB with no luck, what can i do to bring it back to life, please? (have no backup).
Msg 926, Level 14, State 1, Line 1
Database 'IRIX' cannot be opened. It has been marked SUSPECT by recovery. See the SQL Server errorlog for more information.
Msg 824, Level 24, State 2, Line 1
SQL Server detected a logical consistency-based I/O error: incorrect pageid (expected 1:182; actual 32:7602287). It occurred during a read of page (1:182) in database ID 5 at offset 0x0000000016c000 in file 'D:MSSQLIRIX.mdf'. Additional messages in the SQL Server error log or system event log may provide more detail. This is a severe error condition that threatens database integrity and must be corrected immediately. Complete a full database consistency check (DBCC CHECKDB). This error can be caused by many factors; for more information, see SQL Server Books Online.
Msg 3313, Level 21, State 2, Line 1
During redoing of a logged operation in database 'IRIX', an error occurred at log record ID (844:9770:2). Typically, the specific failure is previously logged as an error in the Windows Event Log service. Restore the database from a full backup, or repair the database.
Msg 3414, Level 21, State 1, Line 1
An error occurred during recovery, preventing the database 'IRIX' (database ID 5) from restarting. Diagnose the recovery errors and fix them, or restore from a known good backup. If errors are not corrected or expected, contact Technical Support.
SQL Server detected a logical consistency-based I/O error: incorrect pageid (expected 1:182; actual 32:7602287). It occurred during a read of page (1:182) in database ID 5 at offset 0x0000000016c000 in file 'D:MSSQLIRIX.mdf'. Additional messages in the SQL Server error log or system event log may provide more detail. This is a severe error condition that threatens database integrity and must be corrected immediately. Complete a full database consistency check (DBCC CHECKDB). This error can be caused by many factors; for more information, see SQL Server Books Online.
During redoing of a logged operation in database 'IRIX', an error occurred at log record ID (844:9770:2). Typically, the specific failure is previously logged as an error in the Windows Event Log service. Restore the database from a full backup, or repair the database.
An error occurred during recovery, preventing the database 'IRIX' (database ID 5) from restarting. Diagnose the recovery errors and fix them, or restore from a known good backup. If errors are not corrected or expected, contact Technical Support.
Cannot drop the table '#tmp_sp_db_vardecimal_storage_format', because it does not exist or you do not have permission. (Microsoft SQL Server, Error: 824)
View 3 Replies
View Related
Jun 21, 1999
We ran a test upgrade from SQL 6.5 to SQL 7.0. Everything worked great except we have one stored procedure (and it's an important one) which when run immediately after the upgrade, was fine. It ran in about 15 minutes which is normal.
However, when it was run the second time to retest it, it took 2-1/2 hours to run, then the third time it took almost 6 hours to run. There are no errors in the error log and I've used SQL Profiler to run on trace just on this stored procedure but it really doesn't show anything unusual except that it takes a long time to run this procedure.
The next step we took was to install SP1 thinking maybe there was a problem with a cursor, but that just seemed to make it worse.
Nothing else has changed. This stored procedure runs great on 6.5.
Does anyone have any clue why this might be happening. I dropped the procedure and recreated it, I've recompiled it, etc. and still the same results.
View 2 Replies
View Related
Dec 29, 2005
Hi, paws.
My server crashed recently, I didn't give to much importance because I knew that having access to the partitions I could recover my DB files and attach my database to my new server, and everything was fine until ... I found that my DTS Packages and Jobs where not in my Attached DB.
Now, where can I find these ?
Can you help a tormented man ?
Thanks in advance.
Francisco J
View 4 Replies
View Related
Jul 20, 2005
We needed to replace our Motherboard on a server running win 2K Adv.Server with SQL server 2000. After replacing, we could not bringthe system back with the previous OS. So, we have decided tomigrate to Windows 2003 server and install SQL svr on it.On the old server, the SQL DB is residing on a seperate disk.Is there any way one can install SQL on the new server and importthe data from the disk. Many posts talk about how to do detach/attach etc.The case there is they have a running source server. In my case, I don't.any pointers will be appreciatedRegards,Anand
View 1 Replies
View Related
Jan 31, 2006
Hello.
One of our hard drives has crashed and as a result we have lost our master mdf/ldf & user db mdf/ldf files. It's not that a critical system by any means, but if the hard drive crashes and the master mdf/ldf files & user db mdf/ldf are lost, is there any way of restoring the system?
I'm thinking we probably need to re-install Enterprise Manager completely, and re-install the user db from a backup.
Any advice/suggestions would be much appreciated.
Thanks in advance,
View 1 Replies
View Related
Jan 8, 2008
Hi ,
I am using sql server 2005 standard edition and i have installed MSXML core services 6 and also ADOMD.net for analysis services.
i am using visual studio 2005 version of 8.0.5072742 and the problem that i am facing is when i use to develop reports using Analysis services as a data source , the error message pops up and VS 2005 gets crashed.
i could define the dataset , layout part and when i prees the preview , it gets crashed.
could any one help me on this problem to sort out.
Regards
RMP
View 1 Replies
View Related
Nov 15, 2007
We replicate a SQL2000 database (DataBaseA) to a SQL2000 database (DataBaseB) by using the Restore function and hasn't change its logical name but only the physical data path and file name. It is running fine for a year. We use the same way to migrate the DataBaseB to a new SQL2005 server with the Restore function and the daily operation is running perfect. However, when we do the Backup of DatabaseB in the SQL2005, it just prompt the error message
System.Data.SqlClient.SqlError: The backup of full-text catalog 'DataBaseA' is not permitted because it is not online. Check errorlog file for the reason that full-text catalog became offline and bring it online. Or BACKUP can be performed by using the FILEGROUP or FILE clauses to restrict the selection to include only online data. (Microsoft.SqlServer.Smo)
Please note we left the DataBaseA in the old SQL2000 server.
Please help on how we can delete the Full-text catalog from DatabaseB so we can do a backup
Many Thanks
View 1 Replies
View Related
Oct 14, 2015
I have database on localhost and i want to show this data on my website. I want to create a database online and want to sync with Local Host. Can it be possible syncing data automatically after some interval?
View 6 Replies
View Related
Oct 9, 2007
yes,I have an error, like 'The database file may be corrupted. Run the repair utility to check the database file. [ Database name = SDMMC Storage Cardwinpos_2005WINPOS2005.sdf ]' .I develope a program for Pocket Pcs and this program's database sometimes corrupt.what can i do?please help me
View 4 Replies
View Related
Aug 18, 2005
I want to create a duplicate database in sql 2000 using asp.net from a webform
I created a database using CREATE DATABASE .......
But how to copy tables, views, stored procedures to newly created
database from old using asp.net from webform
Is there any another method to create a duplicate database with another name
from existing database on same server ?
View 5 Replies
View Related
Sep 2, 2007
Greetings, I have just arrived back into the country (NZ) and back into ASP.NET.
I am having trouble with the following:An attempt to attach an auto-named database for file (file location).../Database.mdf failed. A database with the same name exists, or specified file cannot be opened, or it is located on UNC share.
It has only begun since i decided i wanted to use IIS, I realise VWD comes with its own localhost, but since it is only temporary, i wanted a permanent shortcut on my desktop to link to my intranet page.
Anyone have any ideas why i am getting the above error? have searched many places on the internet and not getting any closer.
Cheers ~ J
View 3 Replies
View Related
Apr 9, 2008
I have a problem when i restore my .DAT_BAK file. I am getting error like "The backup set holds a backup of a database other than existing database. Restore Database is terminating abnormally".
I tried by using
RESTORE DATABASE <DATABASENAME>
FROM DISK = 'D:DATAMYTEST.DAT_BAK'
WITH MOVE 'VZAI_DATA' TO D:PROGRAM FILES..MSSQLTEST.MDF',
MOVE 'VZAI_LOG' TO D:PROGRAM FILES..MSSQLTEST.LDF',
REPLACE
And also i tried like
RESTORE DATABASE <DATABASENAME>
FROM DISK = 'D:DATAMYTEST.DAT_BAK'
WITH REPLACE
When i use like this,
RESTORE FILELISTONLY FROM DISK = 'D:DATAMYTEST.DAT_BAK'. I am able to get the output as LogicalName, PhysicalName, Type, FileGroupName, Size, etc.
Can i anyone please help me out?
Thanks in Advance,
Anand Rajagopal
View 8 Replies
View Related
Oct 2, 2007
I am using SQL express and Visual web developer on windows Vista.
When I try to create a new database the following message appears.
CREATE DATABASE permission denied in database master (error 262)
I log on to my computer as an administrator.
Help appreciated
Prontonet
View 4 Replies
View Related
Jan 14, 2008
Hi all,
From the http://msdn.microsoft.com/en-us/library/bb384469.aspx (Walkthrough: Creating Stored Procedures for the Northwind Customers Table, I copied the following sql code:
--UpdateSPforNWcustomersTable.sql--
USE NORTHWIND
GO
IF EXISTS (SELECT * FROM sysobjects WHERE name = 'SelectCustomers' AND user_name(uid) = 'dbo')
DROP PROCEDURE dbo.[SelectCustomers]
GO
CREATE PROCEDURE dbo.[SelectCustomers]
AS
SET NOCOUNT ON;
SELECT CustomerID, CompanyName, ContactName, ContactTitle, Address, City, Region, PostalCode, Country, Phone, Fax FROM dbo.Customers
GO
IF EXISTS (SELECT * FROM sysobjects WHERE name = 'InsertCustomers' AND user_name(uid) = 'dbo')
DROP PROCEDURE dbo.InsertCustomers
GO
CREATE PROCEDURE dbo.InsertCustomers
(
@CustomerID nchar(5),
@CompanyName nvarchar(40),
@ContactName nvarchar(30),
@ContactTitle nvarchar(30),
@Address nvarchar(60),
@City nvarchar(15),
@Region nvarchar(15),
@PostalCode nvarchar(10),
@Country nvarchar(15),
@Phone nvarchar(24),
@Fax nvarchar(24)
)
AS
SET NOCOUNT OFF;
INSERT INTO [dbo].[Customers] ([CustomerID], [CompanyName], [ContactName], [ContactTitle], [Address], [City], [Region], [PostalCode], [Country], [Phone], [Fax]) VALUES (@CustomerID, @CompanyName, @ContactName, @ContactTitle, @Address, @City, @Region, @PostalCode, @Country, @Phone, @Fax);
SELECT CustomerID, CompanyName, ContactName, ContactTitle, Address, City, Region, PostalCode, Country, Phone, Fax FROM Customers WHERE (CustomerID = @CustomerID)
GO
IF EXISTS (SELECT * FROM sysobjects WHERE name = 'UpdateCustomers' AND user_name(uid) = 'dbo')
DROP PROCEDURE dbo.UpdateCustomers
GO
CREATE PROCEDURE dbo.UpdateCustomers
(
@CustomerID nchar(5),
@CompanyName nvarchar(40),
@ContactName nvarchar(30),
@ContactTitle nvarchar(30),
@Address nvarchar(60),
@City nvarchar(15),
@Region nvarchar(15),
@PostalCode nvarchar(10),
@Country nvarchar(15),
@Phone nvarchar(24),
@Fax nvarchar(24),
@Original_CustomerID nchar(5)
)
AS
SET NOCOUNT OFF;
UPDATE [dbo].[Customers] SET [CustomerID] = @CustomerID, [CompanyName] = @CompanyName, [ContactName] = @ContactName, [ContactTitle] = @ContactTitle, [Address] = @Address, [City] = @City, [Region] = @Region, [PostalCode] = @PostalCode, [Country] = @Country, [Phone] = @Phone, [Fax] = @Fax WHERE (([CustomerID] = @Original_CustomerID));
SELECT CustomerID, CompanyName, ContactName, ContactTitle, Address, City, Region, PostalCode, Country, Phone, Fax FROM Customers WHERE (CustomerID = @CustomerID)
GO
====================================================================================
I executed the above code in my SQL Server Management Studio Express (SSMSE) and I got the following error messages:
Msg 911, Level 16, State 1, Line 1
Could not locate entry in sysdatabases for database 'NORTHWIND'. No entry found with that name.
Make sure that the name is entered correctly.
===============================================================================================================
I know I recreated the NORTHWIND Database from a different Database before and I did not do anything for the entry in sysdatabases. How can I change the entry in sysdatabases for database 'NORTHWIND' now? Please help and advise.
Thanks in advance,
Scott Chang
View 5 Replies
View Related
Mar 27, 2007
hii want to copy one database table to onther database table using script?my database is ms-sql server 2000
View 4 Replies
View Related
Jan 11, 2006
I recently added a new user to my database. Now I want to delete that user, but I keep getting the error above. What do I need to do to delete my recently added user?
View 4 Replies
View Related
Sep 10, 2012
We have a SQL database that uses Active Directory with Windows Authentication. Can users that are members of the Active Directory group that has read/write access to the SQL database create ODBC connections to access the database directly and update the data? They dont have individual logins on the server. They are only members of the Active Directory group that has a login?
View 1 Replies
View Related
Mar 8, 2015
I had to to relocate the database log file and I issued an Alter database command but by mistake I put a space in the file name as below. The space is at the beginning file name. Now I am unable get the database loaded to SQL Server. The database has 2 replications configured, so deleting and re-attaching the database means the replication needs to be re-configured. Is there an alternative way to issue a command to update the database FILENAME ? Not sure if this can be edited in master database (sys files).
ALTER DATABASE [User_DB]
MODIFY FILE (NAME = User_DB_log, FILENAME = 'I:SQLLogs User_DB_log.ldf')
GO
View 1 Replies
View Related
Mar 31, 2007
I created the db with the attached script and I am able to access ituntil I reboot the server. I've tried enabling flag 1807 via the SQLserver service and the startup parameters of the instance. In allcases the database always come up suspect after a reboot. There wasone instance where I was able to recover, but I am not sure how thathappened.Does anyone have an idea of how I can reboot the server without thedatabase becomming suspect?USE MASTERGODBCC TRACEON(1807)GO--DBCC TRACEOFF(1807)--DBCC TRACESTATUS(1807)GOCREATE DATABASE ReadyNAS ON( NAME = ReadyNAS_Data,FILENAME = '\NAS1NASDiskSQL ServerReadyNASReadyNAS_Data.mdf',SIZE = 100MB,MAXSIZE = 20GB,FILEGROWTH = 20MB)LOG ON ( NAME = ReadyNAS_Log,FILENAME = '\NAS1NASDiskSQL ServerReadyNASReadyNAS_Log.ldf',SIZE = 20MB,MAXSIZE = 100MB,FILEGROWTH = 10MB)
View 5 Replies
View Related
Nov 5, 2007
Hi all,
I downloaded and ran AdventureWorks.msi into my SQL Server Management Studio Express (SSMSE) one year ago.But I did not know how to attach it to my SSMSE then. Last week, I deleted it from the "Add or Remove" of Control Panel and I downloaded the new AdventureWork.msi and installed it my SSMSE. Today, I tried to use the Database Explorer of VB 2005 Express for the first Stored Procedure programming. I clicked on AdventureWorks.mdf and I got the following error: One or more files do not match the primary of the database. If you are attempting to attach a database, retry the operation with the correct files. If this is an existing database, the file may be corrupt and should be restored from a backup. Cannot open user default database. Login failed. Login failed for user 'CENADe1enxshc'. Log file 'C:Program FilesMicrosoft SQL ServerMSSQL.1MSSQLDataAdventureWorks_Data_log.ldf' does not match the primary file. It may be from a different database of the log may have been rebuilt previously. Please help and advise me how to correct this problem.
Thanks,
Scott Chang
View 9 Replies
View Related
Feb 13, 2008
I have installed 2 SQL Server 2005 Express sample databases from 2 books, ASPnet 2.0 and ADOnet 2.0. The ASPNETDB.MDF was shown in App_Data and Database Explorer, but not in the SQL Server Management Studio Express. The AdoStepBy Step database created by a ConfigDB.exe was displayed in the Management Studio, but not in the App_Data, or Database Explorer.
Is this the way SQL Server 2005 runs the 2005 databases for SQL Server 2005 Express only? Or also in SQL Server 2005?
TIA,
Jeffrey
View 6 Replies
View Related
Jul 15, 2015
I am setting up SQL audit on sql servers in my environment based on requirement. I want to create database specifications ASAP database created. I tried DDL trigger but Audit doesn't support triggers. So I created audit specifications on model database. the only problem with this is every specification created on new database with same name.database specification name includes newly created database name or other methods to create database specifications on newly created databases.
View 6 Replies
View Related
Sep 9, 2015
I am new to SSIS. I have been struggling with this for the past one week. I have a weird task. I need to import several tables from one database to a different server with a new database name. We need to do this at the end of every year. The main problem here is that the number of tables varies every year. You may not have all the tables as last year or may have more tables. So I need to create a dynamic task that takes care of this every year without changing the package.
I have performed the following tasks **
1. Create a new dynamic database. ( I have used Execute SQL Task to do this) 2. Copy all the table structures ( I have used Execute SQL Task to do this)
3. Import Data. This is the main problem. I was trying to create a dynamic connection string with variables as suggested in several forums but I finally came to know that this cannot be done if the table structures are different as the metadata cannot be refreshed at runtime.
4. The final step to create a process to validate the data (the count from each table for both source and destination. I think this can be done with Sql task.
What is the best method to do this? My DBA does not like “Transfer SQL Objects Task” or “transfer Database Task”. I would like to create this as a dynamic process.
View 5 Replies
View Related
Apr 23, 2006
I have a medical records system, SoapWare v4.90, that uses MSDE (SQL2000) databases. Due to the 2gb limitation, I am trying to migrate over to SQL 2005 (Standard or Express) which I have heard works fine. The SoapWare has a datamanager that allows me to log in to the MSDE instance, detach the SoapWare databases from msde (as well as do backups, etc) which I can confirm are detached.
Then I log back into a SQL2005 database instance using the datamanager and try to attach the database. This is what their pictured instructions demonstrate. However, I get the following error:
Database 'sw_charts' cannot be upgraded because it is read-only or has read-only files. Make the database or files writeable, and rerun recovery.
Of course, some of the entries will be read only, since doctors have to sign off the charts and are not allowed to subsequently change them. But I should still be able to switch over to sql 2005?!?!?!?
Or... is there a way to attach the databases to SQLExpress manually?
Help pls?
View 1 Replies
View Related
Feb 4, 2008
Hi all
Iam working in Prodcution ENV,Please help how make space
The log file for database 'Home_alone' is full. Back up the transaction log for the database to free up some log space.
View 10 Replies
View Related
Sep 26, 2006
Dear All,
i have a question abt winCE 4.2 and SQL server CE.
i am using VB.net of Visual Studio 2005
My platform is using a PDA with winCE 4.2 and SQL server CE. The Host program is using dbf files on desktop side.
I got a problem of how to sync / read the sql CE data from a windows application.
so, i wanna ask,
1. any method to access the data from winCE data by windows application? or can i convert the sdf file to windows readable files? or any others?
2. Can i use a MDB to sync with SQL server CE?
can i synchronize the mobile device which has a SQL Server CE database with the Access database on the desktop?
last question,
3. is that windows CE .net 4.2 not support pocket access (cdb) anymore?
please help me out
View 1 Replies
View Related
Apr 8, 2007
Hi all (newbie @ asp.net)(oldie @ ASP 3)What is the purpose of using an attached MDF database files in the App_Data folder on a web site as to importing it into the SQL server directly or creating it on the SQL server. Does a mdf database attached file purely use the SQL server as a connection interface.Is it something similiar to DSN(ODBC) Connections for ms access databases.
View 2 Replies
View Related
