Hi All,
One of the drives that stores the database file is close to running out of space. The chance of me getting more space added to this drive any time soon are really low. What are other options I have?
Thanks.
Hi All,
One of the drives that stores the database file is close to running out of space. The chance of me getting more space added to this drive any time soon are really low. What are other options I have?
Thanks.
Hi all
My Transactional log size increased to 39GB, it is in full recovery mode,
To regain the space, i have done the following
BACKUP LOG DB_NAME WITH TRUNCATE_ONLY
DBCC SHRINK_FILE (LOG_FILE_NAME,500)
But not able to regain the space in the hard disk.
No Transactional backups to truncate the log file were setup.
Can you please tell me why the space was released and what should i do further to clean up the sapce
I have a SQL Server 2012 DB in Full recovery mode that has never had a TLOG backup. the log is huge 200+GB.
I tried doing a transaction log backup but there is not enough space on the Disk.
How can I reclaim this log space in SQL Server 2012?
Hello everybody
Had some problems yesterday with a full transaction log. Was able to solve it by following microsofts knowledge base article n° 272318.
However, today I'm trying to create a new DB using the enterprise manager and get this error:
d:databasesHERCULES_1_Data.MDF: Operating system error 112(Es steht nicht genug Speicherplatz auf dem Datenträger zur Verfügung.) encountered.
The free disk space is > 60GB. That's by far enough... I only need 1-2 GB.
Any ideas what's wrong here?
Thanks anyone in advance for some guideance.
Renaud
I execute the following SQL, and return 3 records, I want to know how many disk space the 3 records use, how can I do? thanks! select * from myTable where username='Paul'
View 6 Replies View Related-- Initialize Control Mechanism
DECLARE@Drive TINYINT,
@SQL VARCHAR(100)
SET@Drive = 97
-- Setup Staging Area
DECLARE@Drives TABLE
(
Drive CHAR(1),
Info VARCHAR(80)
)
WHILE @Drive <= 122
BEGIN
SET@SQL = 'EXEC XP_CMDSHELL ''fsutil volume diskfree ' + CHAR(@Drive) + ':'''
INSERT@Drives
(
Info
)
EXEC(@SQL)
UPDATE@Drives
SETDrive = CHAR(@Drive)
WHEREDrive IS NULL
SET@Drive = @Drive + 1
END
-- Show the expected output
SELECTDrive,
SUM(CASE WHEN Info LIKE 'Total # of bytes : %' THEN CAST(REPLACE(SUBSTRING(Info, 32, 48), CHAR(13), '') AS BIGINT) ELSE CAST(0 AS BIGINT) END) AS TotalBytes,
SUM(CASE WHEN Info LIKE 'Total # of free bytes : %' THEN CAST(REPLACE(SUBSTRING(Info, 32, 48), CHAR(13), '') AS BIGINT) ELSE CAST(0 AS BIGINT) END) AS FreeBytes,
SUM(CASE WHEN Info LIKE 'Total # of avail free bytes : %' THEN CAST(REPLACE(SUBSTRING(Info, 32, 48), CHAR(13), '') AS BIGINT) ELSE CAST(0 AS BIGINT) END) AS AvailFreeBytes
FROM(
SELECTDrive,
Info
FROM@Drives
WHEREInfo LIKE 'Total # of %'
) AS d
GROUP BYDrive
ORDER BYDrive
E 12°55'05.25"
N 56°04'39.16"
I am having a problem backing up my database and TLog files due to alack of local diskspace. The db file is about 30GB and the TLog isabout 20GB each on a different hard disk. Each disk doesn't haveenough available space to accomadate a backup. I also can't shrink thefiles because part of that procedure would require a backup.Question: Can I use a redirected drive for the backup media? Is therea way to trick SQL into allowing this? If the answer is no, doesanyone have a suggestion as to want I should do? I am in the processof requesting more disk space,but that could take a while.Thanks,
View 3 Replies View RelatedDisk space is increasing at an alarming rate (about 500MB a day). Shrink of database seems to have no effect. It is a queueing table so data is inserted then a few minutes later it gets processed & deleted.
Here is info about the problem:
sp_spaceused ImporterModuleQueue
name rows reserved data index_size unused
------------------- ----------- ------------------ ------------------ ------------------ ------------------
ImporterModuleQueue 30 9469432 KB 9468280 KB 32 KB 1120 KB
This is about 9 GB
select sum(len(QueueContent)) from ImporterModuleQueue
49744918
select sum(len(QueueErrors)) from ImporterModuleQueue
43529
This is about 50 Mb
CREATE TABLE [dbo].[ImporterModuleQueue](
[ImporterModuleQueueId] [int] IDENTITY(1,1) NOT NULL,
[ImporterModuleId] [int] NOT NULL,
[StartedDateTime] [datetime] NULL,
[FinishedDateTime] [datetime] NULL,
[QueueContent] [varchar](max) NOT NULL,
[CreatedDateTime] [datetime] NOT NULL,
[QueueErrors] [varchar](max) NULL,
[QueueSourceId] [int] NOT NULL,
[QueueStatusId] [int] NOT NULL CONSTRAINT [DF_ImporterModuleQueue_IsProcessed] DEFAULT ((0)),
CONSTRAINT [PK_ImporterProcessQueue] PRIMARY KEY NONCLUSTERED
(
[ImporterModuleQueueId] ASC
)WITH (PAD_INDEX = OFF, STATISTICS_NORECOMPUTE = OFF, IGNORE_DUP_KEY = OFF, ALLOW_ROW_LOCKS = ON, ALLOW_PAGE_LOCKS = ON) ON [PRIMARY]
) ON [PRIMARY]
--
dbcc opentran
No active open transactions.
--
DBCC SHOWCONTIG scanning 'ImporterModuleQueue' table...
Table: 'ImporterModuleQueue' (2030070418); index ID: 0, database ID: 5
TABLE level scan performed.
- Pages Scanned................................: 14
- Extents Scanned..............................: 10
- Extent Switches..............................: 9
- Avg. Pages per Extent........................: 1.4
- Scan Density [Best Count:Actual Count].......: 20.00% [2:10]
- Extent Scan Fragmentation ...................: 80.00%
- Avg. Bytes Free per Page.....................: 5714.1
- Avg. Page Density (full).....................: 29.40%
How to fix this SQL error event logg 17204 and 17207 ?
View 8 Replies View Relatedhello,all
I am new to Sql 2000,I installed sql 2000 database in C disk,but Now I found my C disk space is smaller than before,So I want to move my databse(include data and structure) from C Disk to D Disk(its space is very large) .
is it possible to do it ?
if its can be done ,do I need to change my asp.net program source code (exp: chaneg my crystal report connectstring ) ?
thanks in advanced!
Hello
I need to setup a compaq sever with 300 MB database, and will be adding around 600 records on a daily basis. Can someone help with how much disk space i should have on sqlserver, providing i have c: and d: setup.
Thank you in advance for all the help.
Paula
Hi All,
I have a server and it has C: D: F: I: Drives and all the system files are on C:Drive and and all the .MDF's and .LDF's(model,temp,master) are on the F: Drive and now I am running out of space on both(C: and F: Drives)
1. Can we add space to the C: and F: drives on the fly?.
2. Can I move the System databases ( MDF's and LDF's to some other drive)and if so, how do I do it?( Moving the databases ) and this is on the production database so when I have to do this.Will there be any impact.
Thanks in Advance,
Reddy
Does anyone know how to get the free disk space for all drives in many different SQL servers.
I need to populate a report (right now output in Excel) with the free disk space of all drives on all of my SQL servers.
I found xp_fixeddrives but that is specific for the server where it is executed.
Any help or pointers to a script in the archives is much appreciated.
Thanks.
I noticed something strange today. I was running a query using query analyzer on a large database (8.8 million records) and the disk space on the c: drive was dropping and eventually went to 0. Availalbe space on the c: drive is 10GB. The query did complete. SQL server and all the databases are on the d: drive. After closing the query results in query analyzer the disk space returned. Is this a concern and is there a way to change it to use the d: for whatever it is doing?
View 3 Replies View RelatedThis is my first attempt using SQL 2000 and DTS. I am importing an Access database using the DTS wizard. The process fails with a "Not enough space on temporary disk" error. There is definitely enough space on the physical disk. I don't have any limits on any folder sizes either. What "disk" is the error talking about, and how do I give it enough space. The database is relatively small, about 10MB. I believe the database was created using Access 97. Please help.
View 1 Replies View RelatedI need a way to get the used space for a physical drive, or even the total capacity for a drive to do some calculations.
I don't want to have to write my own native code either.
Is there a stored procedure that will give this to me?
I saw the xp_fixeddrives that will give the free space, but I need one of the other as well.
Any way to get this?
Thanks,
Jason
We recently moved from v6.5 to v7.0. Now I have the databases and logs set to "autogrow". How can I monitor the disk space to ensure I do not run out of room (or is that preset as to how large it can grow ?). Can't find anything in the books online. Do I do this through the NT admin tool or through the SQL*Server Enterprise Manager and more importantly - how ???
Thanks so much for any help...
Nancy
I'm trying to save a dts package and it keeps coming back with insufficient disk space. I noiticed that db MSDB was full so I manually increased the size. It was set to manually grow at 1 mb increments. But for some reason it didn't look like it was doing that so I manually increased it. Right now this is about 355 MB free so that should be plenty to save a package. But its still coming back with the same error insufficient disk space to complete operation. Any ideas on why or why it didn't grow on its own? Please help I can't seem to save any packages.
View 1 Replies View RelatedOur database -SQL Server 7.0 sp1 (NT 4.0 sp5)- is growing at a very fast rate despite the fact that we are deleting old record. It doesn't seem to be recovering disk space for the deleted records. Please let me know if there is a specific setting that can help us recover disk space. )
View 1 Replies View RelatedHi,
I'm new to these forums (and to SQL Server), so please be gentle with me.
I am developing a process to obtain information on all our remote servers/databases, and store it in a single local database.
I'm after things like db size, last backup date, free drive space etc...the usual weekly statistics.
I've linked the remote servers to my local one, and have written a few simple procedures (which exist on the local server) to grab backup and file size information from the remote tables. The output is stored locally in tables which we can then query as necessary.
I am having difficulty obtaining the free drive space details.
I'm using :-
'exec <remote_server>.master.dbo.xp_fixeddrives' to get the info, but I cannot store the output in a table on the local server. (remote_server_name, date, drive_letter, space_mb)
I wish to avoid creating any objects on the remote servers if at all possible.
I really want to pass the remote server name into the procedure, and the output to be inserted into the table.
Many thanks
is there a tsql command that returns the amount of disk space available. I want to set up a job to run and email if it gets to a certain level.
View 1 Replies View RelatedHi
I have 600 instances on my network .... I need to monitor the Disk Space ... how should I do that I mean the best way for this would be ???
By Disk Space I mean the SQL Instance should atleat have 10% of free disk space ... If it is less , maybe an alert can be sent or something of that sort .
Now it would be a pain configuring alerts on each machine.
Is there some good way to this
Thanks in advance.
All,
I think i know the answer to this one already, but would like to check before going back to my management.
Background. In the past 2 weeks, a number of our databases have shot up in size, and are now at 100% utilisation of allocated disk space. My management have asked me to look into what is causing these to fill up so quickly.
Unfortunatly there were no snap shots or information relating to the databases / tables so i can not determine which tables have grown and are causing the problems.
I have also looked through the sql logs and the event viewer logs to see if there is anything out of the ordinary, but again apart from log / database backups there is nothing of note in there.
I am going to be implementing a solution that I got off another thread which will give me some database / table history to help me in the future, but for now is there anything else i can do? or is it a case of me getting back to the application guys and getting them to reduce data (as there is no more disk space to give them).
Any thoughts or advice you can give me would be greatfully received.
Mark
-noob dba-
Okay, so i have a Dual Xeon SQL2k5 Server set up. it's got 4 10k RPM Raptor Drivers (160gb) on it all stripped together. my question is this, i was just doing all kinds of index tuning, and my server didnt have enough disk space to create 2two of the recommended adjustments. i'm curious, if i should just have those two indexes stored on the 1TB Backup array i have? (two 500gb 7200RPM drives)
or should i backup the database, and expand the Raptor Array and then restore the database and create the indexes?
i'm not really worried about down time as long as it doesnt exceed 2 days.
All,
I first ran indexdefrag on a table with 1.5 billion rows.
logical fragmentation was at 95%.
logical frag went down to 3% with no real effect on disk.
DBCC reindex had previously been bombing undetected.
Now I've run a reindex on this table:
Reindex Job with Fillfactor =100
Ran in 3:05
Free Disk went from ~150GB before operation to 49GB
File4 went from 347GB to 504GB
Why has so much free disk been consumed by this operation and not released ??????????
Is my only choice to shrink data file???
thanks
Env.
Win2k ENT os
SQL 2k5 std 64bit
one user database ldf file is growing like it reached 50GB and total D: drive space is 70GB. No SAN drives for D:. I tried to shrink the file but it not shrinking. Even I tried take to Tlog backup but it is throwing the below error
'not enough disk space'
This is production server. Please let me know how to resolve this issue?
one user database ldf file is growing like it reached 50GB and total D: drive space is 70GB. No SAN drives for D:. I tried to shrink the file but it not shrinking. Even I tried take to Tlog backup but it is throwing the below error
'not enough disk space'
This is production server. Please let me know how to resolve this issue?
I need to find out how much space is available on a disk (ex. C on the server from within a stored proc on ss2000. Is there an easy way?
Thanks!
I heard somewhere that using reporting services you are able to report on more useful aspects also such as server disk space, how is this possible, or where can i find any tutorials to help me out
thanks in advance
Jonny
Another question...
I need to check the space available on a specific disk (D on a remote server, again, this task will be executed from an SSIS package, if I have less than 60GB available, I have to delete some files.
How would you guys do this using VB.NET? If I had SQL Server installed on that box, I could achieve this executing a DOS command... But I don't...
Thanks!
Hello,
this is my configuration :
1) 3 disks in RAID5 that hold the SQL data
2) 1 disk in RAID0 that holds the only paging file.
What will happen to the SQL data (DB) when the disk that holds the paging file crashes?
Kindest regards,
Luc.
Hi all
Iam working in Prodcution ENV,Please help how make space
The log file for database 'Home_alone' is full. Back up the transaction log for the database to free up some log space.