Database Integrity Check
Aug 2, 2006
I have a database hosted that doesnt passes the integrity test. Here is the error it gives :
Executing the query "USE [db_cs]
failed with the following error: "Could not locate entry in sysdatabases for database 'db_cs'. No entry found with that name. Make sure that the name is entered correctly.". Possible failure reasons: Problems with the query, "ResultSet" property not set correctly, parameters not set correctly, or connection not established correctly.
Any idea whats wrong and how I can let the integrity test pass for this db.
Thanks,
Rubal Jain
View 4 Replies
ADVERTISEMENT
Jan 22, 2008
im trying to set up maintenance plan for the check database integrity...
In sql 2000 you get a nice little log in SQL Logs
DBCC CHECKDB (WSS_Search_db3) executed by xxx found 0 errors and repaired 0 errors. Elapsed time: 0 hours 0 minutes 1 seconds.
But in SQL 2005
Im not getting a nice log of this but getting it against some system database and not the database i selected
Date1/22/2008 5:19:43 PM
LogSQL Server (Current - 1/22/2008 5:19:00 PM)
Sourcespid84
Message
DBCC CHECKDB (mssqlsystemresource) WITH no_infomsgs executed by XXX found 0 errors and repaired 0 errors. Elapsed time: 0 hours 0 minutes 1 seconds.
Anyone got this to work?
Trying to get the same message i got for SQL 2000 or at least so i can confirm it ran.
View 13 Replies
View Related
Oct 18, 2007
Hi,
I have no way to test this. If let's say the database has logical integrity errors, will it throw back an error to the Check database integrity object such that, the error arrow (the red line which is the error handler stuff) will be triggered for notification purposes?
cherriesh
View 1 Replies
View Related
Mar 6, 2008
what does check database integrity in maintenance plan do.
i heard that the transactional log growth in sql server should be fixed to maximum available disk space and must be monitore the threshold through maintenance plan.how can it be done. please advice me through maintance plan instead of
shrinking the log as it is unnecessary IO to the disk.
How often is the check database integrity scheduled. is it daily or weekly.
View 1 Replies
View Related
Feb 16, 2007
I have setup a full maintenance plan on SQL2005. When I run the job, I don't see any error but by loooking at the Log file viewer it appears that Check Database Integrity step failed because :
Alter failed for Server 'LUMONT001'.
Moreover, when I run DBCC CHECKDB from the console I have no error message. Any clue?
Thanks, Paul
View 6 Replies
View Related
Mar 14, 2008
Hi,
I want to what check database integrity task does in Maintenance plan..
Anyone help.
View 3 Replies
View Related
Apr 23, 2008
I searched the forum on this topic and saw the following explanation on Check Database Integrity Task, by DarrenSQLIS.
"The Check Database integrity task will fail if the DB has a problem. The task fails; the details are raised in the error event and dumped to the log etc. You can use on Failure precedence constraints or an OnError event handler to capture that failure and do something if you wish."
Here is the link to the quote above.
http://forums.microsoft.com/MSDN/ShowPost.aspx?PostID=2290253&SiteID=1
I would like to continue this discussion on this new thread to help my understanding.
I understand that this command does dbcc checkdb( ) command on a specified server for the databases you want to check. And if a database has a problem the task will fail and raise an OnError event. DarrenSQLIS goes on to say that the error is dumped to a log. What log is this? Where do I specifiy the location of this log?
View 7 Replies
View Related
Apr 7, 2008
Our system is 24/7, ldf file disk space is 30 gb.
As per the advice given by somebody
i set ldf initial log size as 29 gb and restricted the growth and set the autogrowth to 500 mb
i did not run and shrink ldf command on daily basis. this is the advice given by another dba.
then he suggested to create a maintenance plan to check database integrity check. whick will
check the disk space threshold.
i did not understand how will the maintenance plan check the disk space and give an alert.
where should i check the alert for this maintenance plan. secondly how can i stop my database log file to deliver a message that my disk is full.
please suggest me a best method. where i am wrong , how should i handle the situation without the dba monitoring.
and our system has lot of batches running for every minute.
View 13 Replies
View Related
May 16, 2008
Hi gurus:
I met a very strange problem recently. I set up a database integrity check maintenance plan. But this job failed every time. I looked into the logs, the error message was that Databases that have a compatibility level of 70 (SQL Server version 7.0) will be skipped. I used the sp_helpdb to check the version of the databases included in my maintenance plan. The sp result shows that all the databases are above version 80....
Even more strange, i can successfully run the dbcc check query on each database.
Any comment and suggestion will be very appreciated.
View 1 Replies
View Related
Oct 17, 2007
Hi All,
I have built a package that firstly shrinks a database and then backs it up which is scheduled to run each day, but I would like to add a check (Check Database Integrity) in as the first task and if the Database checks out ok then continue on, if not send an email.
Now, I am unsure if the Check Database Integrity Task in SSIS actually returns the success or failure message back to the package that I am after. The SQL behind the task includes the NO_INFOMSGS option.
Can anyone advise if it is possible to have the status/integrity of the database returned to the SSIS task and to proceed based on the result?
Regards
View 3 Replies
View Related
Mar 8, 2015
I've been running the Ola Hallengren maintenance script for the last five months without missing a beat. Today I find an error stating the UserDatabase Integrity check job failed last night. This is running on SQL Server 2014 BI edition w/64 Gigs.
I ran a DBCC CHECKDB on each database manually and all worked until I tried it on the biggest one that is about 18 gbs. It just keeps running and I eventually stopped it so I'm guessing it is memory, but doesn't make sense considering it has 64 gbs. I have it set to 64/4 max / min. Again, this was never an issue until last night.I've been looking up all morning, but not seeing much on this error "The operating system returned error 1453"?
View 5 Replies
View Related
Apr 13, 2007
I installed SQL Server 2005 Enterprise, then SP1 and then SP2, Maintenance Plan worked. But if I installed SQL Server 2005 Enterprise and then SP2 directly (skipping SP1), the Check Database Integrity in Maintenance Plan was not working. The error message is as follows:
Executed as user: DomainSqlServiceAccount. Microsoft (R) SQL Server Execute Package Utility Version 9.00.3042.00 for 64-bit Copyright (C) Microsoft Corp 1984-2005. All rights reserved. Started: 10:56:21 AM Could not load package "Maintenance PlansTest Plan" because of error 0xC0014062. Description: The LoadFromSQLServer method has encountered OLE DB error code 0x80004005 (Login failed for user ''. The user is not associated with a trusted SQL Server connection.). The SQL statement that was issued has failed. Source: Started: 10:56:21 AM Finished: 10:56:21 AM Elapsed: 0.047 seconds. The package could not be loaded. The step failed.
Other tasks like Rebuild Index seem to be fine. SP2 is supposed to be inclusive. Does anyone have any ideas on why this is happening.
Thanks
E.G.
View 10 Replies
View Related
Feb 21, 2008
Hi,
I am administering several SQL Servers running SQL Server 2005 SP2 Build 3042.
I have a common maintenance plan that runs on each of the servers. The maintenance plan runs
fine on all the servers except for one. On the one server the Database Integrity check fails with the following error:
Check Database integrity on Local server connection
Databases: <list of databases>
Include indexes
Task start: 2008-02-21T00:05:42.
Task end: 2008-02-21T00:05:46.
Failed0) Alter failed for Server €˜XYZ€™
I created a test maintenance plan to just do the integrity check and selected one database only and this also failed with the same error message. I ran this test maintenance plan and configured it for each of the databases in question and it failed each time.
If I run the DBCC manually against the databases they all report fine.
I read some of the post that talked about the €œAllow Updates€? being set incorrectly but that does not apply to my problem since my configured and run values are set to 0.
Does anyone know what the problem could be?
View 23 Replies
View Related
Jul 20, 2005
Hi,What methods can we use to check the integrity problems? Some records in mydatabase are having Foreign Keys but the database doesn't have any relatedrecords with required Primary Keys. I need to scan the whole database anddelete (maybe with backup, maybe not) all wrong records.Who can I do that? Is it need to write my own application to do that or wehave some standard way to fix these problems? I'm not a databaseadministrator and don't know these ways (yet). Can somebody help me withadvice?Thanks.Dmitri Shvetsov
View 4 Replies
View Related
Jun 1, 2015
I have a database in the 3rd normalized form. There is a need to load rows into a child table. To avoid having to drop RI, an ALTER TABLE WITH NOCHECK is being used. I am looking for a way to verify the integrity after the load is complete. After the load an ALTER TABLE WITH CHECK will be executed. Can I used DBCC to verify, that no orphaned child rows were loaded? If so, which parms would I have to use with DBCC?
View 0 Replies
View Related
Mar 13, 2008
on sql server 2000, try to do integrity check on several database once a week but failed, what would be main area to look up? thank you
View 3 Replies
View Related
May 21, 2008
Hello everyone,
Currently having some issues with my laptop. I'm no computer expert / programmer so please bear with me.
It is a Vista Home Premium based machine that was purchased about 6 months ago. I'm having issues with an application that relies on WDAC to work. The application worked perfectly in the past and I just recently tried to use it again and it doesn't get past the "Loading Application" screen.
From the company website, they make it clear that anyone using the software has to make sure to run the Windows update to bring the DOT NET framework and MDAC to their latest revisions.
Now, I know that MDAC has been replaced by WDAC to run under Vista. However, I learned that only after trying, for a completely different reason, to install MDAC 2.8 SP1 (I know, dumb idea).
All this to end up saying I'm pretty sure something was screwed up in my WDAC when I tried installing MDAC. I would like to know if there is any way to verify the WDAC installation integrity, basically a Microsoft Component Checker equivalent under Vista.
Thanks a lot for helping a newbie !!
View 2 Replies
View Related
Mar 6, 2006
I set up a test database to try and understand table partitioning. Since deleting the partition schemas, functions and all relevant info on the database properties page, I am getting the following errors during the weekly database integrity check:
Msg 8914, Level 16, State 1, Line 1
Incorrect PFS free space information for page (1:223) in object ID 60, index ID 1, partition ID 281474980642816, alloc unit ID 71776119065149440 (type LOB data). Expected value 0_PCT_FULL, actual value 100_PCT_FULL.
Can anyone suggest why this might be happening?
Thanks
View 14 Replies
View Related
Jul 3, 2006
I found the following error in my maintenance plan please help me on this
Under maintenace plan history i found this error:-
[Microsoft SQL-DMO (ODBC SQLState: 42000)] Error 1934: [Microsoft][ODBC SQL Server Driver][SQL Server]UPDATE STATISTICS failed because the following SET options have incorrect settings: 'QUOTED_IDENTIFIER'.
and jobs failed with following error
i found this error in job history of optimization & integrity check jobs:-
Executed as user: XXXXadmin. sqlmaint.exe failed. [SQLSTATE 42000] (Error 22029). The step failed.
Please help me find out the solution
Thanks in advance
Regards,
Sumit
View 2 Replies
View Related
Apr 26, 2007
Ever since upgrading SQL Server 2005 to SP2 build 3050 all my maintenance plans which begin with a Check Database Integrity Task are failing! If I remove the task from the plan they all execute properly. If I run the T-SQL equivalent manually it executes properly.
I upgraded the server to build 3054 and rebooted several times and Im still having no luck. What am I doing wrong?
Thanks for your help with this.
-Kenny
View 7 Replies
View Related
Nov 26, 2007
Hi Friends,
I am Ravi, I need a help.
My case is like.. i need to upload data from csv file into sql server 2005 data table.
but before that I need to check integrity of data
for example:
let us say csv data is like
ISD CODE,STATE,NAME,QUALIFICATION
91,AP,KIRAN,MCA
01,MC,MIKE,MS
here i have to check that, wether there is an entry in ISD codes table for 91 and 01 (india and us)
similarly AP , MC (Andhra Pradesh and MISSICippi)
please suggest me a nice approach, no of records in ISD codes and States will 350-450 records.
thanks in advance
Ravi K
View 3 Replies
View Related
Jul 6, 2014
Running Frequently Transaction logbackup during Integrinty check DB /optimization job will cause any issue /impact as duration will extend ...
View 2 Replies
View Related
Feb 12, 2008
Using SQL Server Express 2005, I have two databases. AppDB - The main application database.GeoDB - A somewhat static ZIP code / states / other geographic stuff databaseI need to have some foreign key columns in tables in AppDB reference columns in the GeoDB database tables. Eventually other application database besides AppDB will be doing the same thing in our infrastructure. After googling and reading for days, here is what I
think I know:You cannot create foreign keys that reference tables in another database in SQL Server.You
cannot create foreign keys that reference columns in a view, and you definitely cannot make an index on a view that has base tables in another database.You can create a trigger that references tables in another database, but this can be flaky? (nested/recursive trigger problem).SQLServer
2005 supports multiple schemas within the same database. Maybe I should logically separate my databases this way? Seems like it would be a tough solution to manage since I already have some databases live in production that will eventually use this 'static' GeoDB. Also, seems like it
wouldn't be as portable as keeping the GeoDB info in its own database,
but maybe I'm being too software engineer-ish here - afraid of low
cohesion, high coupling.I will greatly appreciate any advice I can get, or any more options I am missing. Thanks,Adam Nofsingerucnmedia.com
View 2 Replies
View Related
Jul 8, 2005
Since most use SQL server, I thought I would post the question here.Is it possible, or is there a product or DBMS that enforces referential integrity across multiple databases and database types? Such as SQL Server, Oracle, etc...Thanks,Zath
View 2 Replies
View Related
Feb 12, 2008
Using SQL Server 2005, I have two databases.
AppDB - The main application database.
GeoDB - A somewhat static ZIP code / states / other geographic stuff database
I need to have some foreign key columns in tables in AppDB reference columns in the GeoDB database tables. Eventually other application database besides AppDB will be doing the same thing in our infrastructure. After googling and reading for days, here is what I think I know:
You cannot create foreign keys that reference tables in another database in SQL Server.
You cannot create foreign keys that reference columns in a view, and you definitely cannot make an index on a view that has base tables in another database.
You can create a trigger that references tables in another database, but this can be flaky? (nested/recursive trigger problem).
SQLServer2005 supports multiple schemas within the same database. Maybe I should logically separate my databases this way? Seems like it would be a tough solution to manage since I already have some databases live in production that will eventually use this 'static' GeoDB. Also, seems like itwouldn't be as portable as keeping the GeoDB info in its own database, but maybe I'm being too software engineer-ish here - afraid of low cohesion, high coupling.
I will greatly appreciate any advice I can get, any links to articles, or any more options I am missing.
Thanks,Adam Nofsinger
ucnmedia.com
View 9 Replies
View Related
Jan 2, 2002
Hi everbody,
Integare check job failing on replication(merge) database.Can you tell me how to schedule the this job.
Thanks
Mark
View 1 Replies
View Related
Feb 1, 2007
Hi,
I want to automate the process of database integrity checks in sql server any suggestions how to do
View 1 Replies
View Related
Apr 10, 2006
Is there a way to disable referential integrity on all destination tables for an import?
Thanks.
View 1 Replies
View Related
Aug 1, 2001
Can someone give me an example on how to enforce cross-database referential integrity with triggers in SQL Server 2000?
Thanks,
Joel
View 1 Replies
View Related
Sep 19, 2014
In SQL Server 2012 (also 2005 and 2008), can you have Referential Integrity across a Database? Across a Schema?
View 1 Replies
View Related
Nov 21, 2006
Hi,
We are in search of beta testers for our new software tool for SQL Server : Remote Keys allows you to define and enforce cross databases integrity constraint. With Remote Keys, you can create a foreign key between to SQL tables located in distinct databases.
Beta version can be downloaded here : www.remote-keys.com.
Thank you,
Tom
View 2 Replies
View Related
Jan 5, 2007
Hi,
We are in search of beta testers for our new software tool for SQL Server :
Remote Keys allows you to define and enforce cross databases integrity
constraint. With Remote Keys, you can create a foreign key between to SQL
tables located in distinct databases.
New version (beta 2) can be downloaded here : http://www.remote-keys.com
Thank you,
Tom
View 1 Replies
View Related
Apr 30, 2008
Hi all,
I am writing a portion of an app that is of intensely high online eCommerce usage. I have a question about identity columns and locking or not.
What I am doing is, I have two tables (normalized), one is OrderDemographics(firstname,lastname,ccum,etc) the other is OrderItems. I have the primary key of OrderDemographics as a column called 'ID' (an Identity Integer that is incrementing). In the OrderItems table, the 'OrderID' column is a foreign key to the OrderDemographics Primary Key column 'ID'.
What I have previously done is to insert the demographics into OrderDemographics, then do a 'select top 1 ID from OrderDemographics order by ID DESC' to get that last ID, since you can't tell what it is until you add another row....
The problem is, there's up to 20,000 users/sessions at once and there is a possiblity that in the fraction of a second it takes to select back that ID integer and use it for the initial OrderItems row, some other user might have clicked 'order' a fraction of a second after the first user and created another row in OrderDemographics, thus incrementing the ID column and throwing all the items that Customer #1 orders into Customer #2's order....
How do I lock a SQL table or lock the Application in .NET to handle this problem and keep it from occurring?
Thanks, appreciate it.
View 2 Replies
View Related
