Database Mail - Status Sent But Email Never Received
Jan 29, 2007
From SQL Management Studion I go to Management > Database Mail and I am trying to send a test email but I never receive anything. I checked my SMTP Mail Server Logs and I saw no entry of my test email.
I also I checked my SQL Database Mail Logs and everything seems fine, no errors are reported.
The msdb.dbo.sysmail_allitems shows my email status as "sent".
So what am I missing? What steps would you recommend for troubleshooting my problem?
Kind of a newby sql question, but here goes:I have a sql 2005 database that I have a job that runs Sunday morning at 12:30 am. I set it up using SQL Svr Mgt Studio 2005. Under the Management directory I set up Database Mail to work with my local SMTP server. I can send a test email just fine.I then set myself up as an operator with my email address. (Under operators directory) I then went back to the properties of the job I set up, and under 'notification', chose e-mail operator (me) when Job Succeeds. The job runs, itt suceeds, but NO email!It flat out won't work. there are NO entries in teh( email) log for errors either. Anyone? TIA Dan OR is it better to script these jobs using xml? I don't have time to learn a new thing right now, just need it to work!
I'm having problems sending my query results as a csv file. Ideally I would be able to send my results from a sql job every night as a csv but I'm having problems doing it. My code is shown below
I have a website that I want to put a contact form on so I can allow users to send emails from it. I have SQL Server as my db but my hosting co. won't allow me to use the Database Mail procedure to send emails (msdb.dbo.sp_send_dbmail I think it's called). I will have to write my own procedure to do it instead. Can anyone point me in the direction of some good resources where I might get some info on how to do this?
I want updated to few of person of any changes in database just by sending to their emails in every 2 hours as an example. I go through the example given but I do not know the step how to run stored procedures. The Information that I want to give to them is like as:
Date From : 23/02/2008 Date To: 24/02/2008 Number of user : 3
My draft table is like this
Sequence_No Submitted_Dt Name -------------------- ------------------- ------------------------
1 2/21/2008 4:16:45 PM John 2 2/22/2008 4:16:45 PM Dean 3 2/23/2008 4:16:45 PM Rick 4 2/24/2008 4:16:45 PM Van
We have a ASP.Net 2.0 web application and need to send out emails. We have an EmailQueue table in our database where email gets stored before it is send out. We are looking at the pros and cons of using Database Mail in SQL Server 2005 to send out our emails. Should we use SQL or our web app to send email???Tips, tricks, articles, experiences, opinions are greatly appreciated. Newbie
i've got a brand new server and just installed SQL 2005.
when i try to send a test email, i get the following error message:
The mail could not be sent to the recipients because of the mail server failure. (Sending Mail using Account 5 (2006-11-23T11:49:34). Exception Message: Could not connect to mail server. (No connection could be made because the target machine actively refused it). )
I have checked all items from troubleshoot and eveything is ok...any help ?
I am trying to send out notifications when jobs complete (fail or succeed). I have database mail working fine on my DEV server, but I am having issues with it on my PROD server. I am currently having people look into if McAfee may be blocking it.
I am able to send out a test email from SSMS>Management>Database Mail, but when I set a Notification for a job, the job will complete and in the history, it will say "NOTE: Failed to notify 'User' via email."
I have created an Operator and set up Profiles and Accounts, just as I did on my DEV server.
We recently had a problem with DB Mail. SQL jobs that sends an email succeeded but the email in the job fail to sent. There was a problem with the email server. The error is included. We fixed the problem with the email server. How can I get an alert when a DB Mail email fails send?
Date4/23/2015 10:01:06 AM LogDatabase Mail (Database Mail Log)
Log ID5907 Process ID13204 Mail Item ID5702 Last Modified4/23/2015 10:01:06 AM Last Modified Bysa
Message The mail could not be sent to the recipients because of the mail server failure. (Sending Mail using Account 1 (2015-04-23T10:01:06). Exception Message: Cannot send mails to mail server. (Insufficient system storage. The server response was: 4.3.1 Unable to accept message because the server is out of disk space.). )
hi need help how to send an email from database mail on row update from stored PROCEDURE multi update but i need to send a personal email evry employee get an email on row update like send one after one email
i use FUNCTION i get on this forum to use split from multi update
how to loop for evry update send an single eamil to evry employee ID send one email
i have 70 SQL database servers and i setup DB Mail on the 70 Servers, i want to know is there a way to find the status of all the jobs which i assigned the DB Mail and if its working/failing... is there a script i can run on powershell or SQL to find out that information
I need to create a basic report that displays the userid, username, email, status and need to update the status column to enabled when we select any particular username. And the username parameter comes from the available users from the database. How to do this?
Do I need to mention the where clause where username=@username in the query or we don't need any
Also I need to get the available distinct usernames from the database while entering the parameter username
/*DECLARE variables to use IN queries*/ DECLARE @intErrorCode INT DECLARE @ErrorMessage VARCHAR(MAX) DECLARE @UserID INT SET @ErrorMessage = 'Completed.' SELECT [userid] ,
[code].....
Basically first I need to find the userid, username, accountstatus, email for a given particular user. Then I need to update the accountstatus to enabled for that selected user.
Also I need to create auditing that from before update and after update the accountstatus.
I have data driven subscriptions which are working fine for some subscription and one i have newly developed which is used to send the missing punch report to employeesNow , when the subscription runs it shows that all have gone email in report server but some of they are not getting any email i have tested it on my id to send each ones report to me but i also get sometimes 2 of 15 , 4 of 15 or else but not all i also checked mailroot folder under my server's inetpub there are nothing stucks. How to check why is it not sending email to all employees ?
I have setup SQL Mail on a SQL Server 2000 (service pk 3a) with outlook 2002.
SQL Mail give me the success message when I test the profile.
When I send a test message to an operator from SQL Agent it works fine.
When I send a message from the Outlook 2002 client (logged in as the Service-SQL domain account), I can send a message without a problem.
However, when I send an xp_sendmail message (xp_sendmail @recipients='email@address',@message='test',@subje ct='test') it tells me 'Mail Sent' in the result window, but the email never arrives or shows up in the 'sent items' folder in outlook 2002.
This is my syntax which looks valid to me, but the message will never send, need to get the message to send? (@recipients & @from_address are junk here, but valid email addresses in my procedure)
I am trying to explore the email task in SSIS. I have a task which has only the email task. When I run its not throwing any error instead it says successfuly run but I am not recieving mail. I dont know how to trace this, could someone help me on this?
I am implementing a fax solution (Right Fax) and pulling email information from a table and passing into a variable. In order to send out a fax via email, the syntax is in the following example below:
Example:
To send a fax from Outlook to Jane Doe at 555-1212, enter:
[RFAX:Jane Doe@/FN=555-1212]
When the following syntax gets passed into the Send Mail Task, into the "To" line and the package is executed I'm receiving the following.
[Send Mail Task] Error: An error occurred with the following error message: "The specified string is not in the form required for an e-mail address.".
[Send Mail Task] Warning: The address in the "To" line is malformed. It is either missing the "@" symbol or is not valid.
I realize it’s a malformed email address. Is it possible to create a group and instead of the fax syntax pass the group name?
Lokendra writes "I have configured the Database mail profile and account in Sql Server 2005 but the mail is not sending and showing the following error message:
Error,235,The mail could not be sent to the recipients because of the mail server failure. (Sending Mail using Account 1 (2007-03-05T15:16:07). Exception Message: Cannot send mails to mail server. (Mailbox name not allowed. The server response was: Sorry<c/> that domain isn't in my list of allowed rcpthosts.). ),3000,90,,3/5/2007 3:16:07 PM,sa
but while in the same mail set up in previous instance of sql server 2005 the message was sending very well. After installing new instance of sql server 2005 the problem is arising.
Anybody can tell me that what I can do so that i can send mail using the SMTP databasemail account."
Our company use yahoo business mail server for our corporate mails. I know that I can configure database mail with SMTP. But when I try to configure database mail account with yahoo bizmail, I cannot do that. It gets configured but when I test it it doesn't send any mails. Do I need to have any special condiguration for this. SMTP address is smtp.bizmail.yahoo.com. Also I have specified the Authentication using my user name and password. Please help
I want to send a simple mail using DATABASE MAIL feature in SQL SERVER 2005.
I've defined a public profile. I've enabled Database Mail stored procedures through the Surface Area Configuration .
but I can't send a mail with sp_send_dbmail stored procedure in 'msdb' database .
when I execute sp_send_dbmail in the Managment Studio the message is "Mail queued" but the mail is not sent.
Could it be related to Service Broker?Because the Surface Area Configuration indicates:'this inctance does not have a Service Broker endpoint'.If so, how should I make an endpoint?
here is the log file after executing sp_send_dbmail:
1) "DatabaseMail process is started"
2) "The mail could not be sent to the recipients because of the mail server failure. (Sending Mail using Account 2 (2007-03-08T00:49:29). Exception Message: Could not connect to mail server. (No connection could be made because the target machine actively refused it)."
The DatabaseMail90.exe is triggred ,so the mail is transfered to the mail queue but DatabaseMail90.exe couldn't give the mail to SMTP server.The promlem is what should I do to make DatabaseMail90.exe able to connect to the server?
what I want to achieve is to load a text file that has email addreses from disk and using the email addresses in the text file look it up against the email addresses in the database table then once matched delete all the users in the table whose email address were in the text file.
I also want to update some users using a different text file.
Hi is it possible to have a page of a website display the status of a database or MS SQL with .Net code ?, if so what code would i use. Any help would be appreciated.Thank You
I used the sp_msforeachtable stored proc to disable all triggers in a database. Once the command is complete, I want to see the statuses of all these triggers . I am used to an Oracle database so I miss the data dictionary views that easily show this info. Also, I need to view the statuses of all FKs once they are all disabled as well.
A hard drive crashed on one of our MS SQL Server 2005 and brought the server down with it. We had replaced the hard drive and rebuilt the RAID 5 container and got the server rebooted. However, one of the databases got corrupted after that. THis is the error logs snippet: =============== ,An error occurred during recovery<c/> preventing the database 'survey_p0765392' (database ID 439) from restarting. Diagnose the recovery errors and fix them<c/> or restore from a known good backup. If errors are not corrected or expected<c/> contact Technical Support., ===============
We have backup which is 2 days old, and restoring from the backup would result in us losing a lot of records that we have created since then. Is there any way to recover the data from this database? How canI repair it? Please advice. Thanks
I have a client using SQL 2k, SP2 (due application requirements, SP3 is notan option - the application vendor will not specify why). We are receiving:[Microsoft][ODBC SQL Server Driver]Unknown token received from SQL ServerConnection BrokenThere doesn't appear to be any rhyme or reason as to why this is happening.And...it shows it's ugly head at random places during execution. Has anyoneexperienced this also, or have any ideas on what to look for? I have seennumerous suggestions stating to upgrade from MDAC 2.6 to 2.7. At thispoint, I'm not sure if thats an option based on the vendors application(which by the way they no longer support!).Any ideas will be greatly appreciated.Greg
Hello, I have a database design question. I want to store a status in a table. In the ASP.NET interface for the user this status will be adapted to the language of the user. This is how it would look like: StatusID 1 = "yes" for English, "oui" for French, "ja" for DutchStatusID 2 = "no" for English, "non" for French, "neen" for DutchStatusID 3 = "error" for English, "erreur" for French, "fout" for Dutch I don't want to do the translation in ASP.NET and it should be done in one query. How would it look like in the database design.
