I was working on my Lab Environment and i had a DB which was mirrored in synchronous mode without witness server. I truncated one of the tables in this DB and did a failover to the mirror server. The table got truncated in the mirror too. Though we know that truncate is a non logged operation how does this mechanism work? Can someone please expain me??? Thanks in advance. Your replies will be very much helpful to me.
hi
Can We Use Truncate Command on a table which is Refernced by Foreign Key?
With a database size of almost 2 GB, I run the 'truncate table eventlog command' which completes successfully, but the database size only decreases by about 10 MB so stays too large - indeed the number of rows in the eventlog table is minimal, but the otehr tables in this database don't show such an amount of tables large enough to cause the size issue either. What could be the reason and how can I reduce it (possibly truncating another table but then which one, how could I determine which is too large and needs truncating?).
View 3 Replies View Related Here is my issue I am new to 2005 sql server, and am trying to take my old data which is exported to a txt file and import it to tables in sql. The older database is non relational, and I had made several exports for the way I want to build my tables. I built my packages fine and everything is working until I start building relationships. I remove my foreign key and the table with the primary key will get updated for the package again. I need to update the data daily into sql, and once in it will only be update from the package until the database is moved over.
It will run and update with a primary key until I add a foreign key to another database.
Here is my error when running the package when table 2 has a foreign key.
[Execute SQL Task] Error: Executing the query "TRUNCATE TABLE [consumer].[dbo].[Client] " failed with the following error: "Cannot truncate table 'consumer.dbo.Client' because it is being referenced by a FOREIGN KEY constraint.". Possible failure reasons: Problems with the query, "ResultSet" property not set correctly, parameters not set correctly, or connection not established correctly.
We have a SQL server 2012 database with size 200mb and Transaction Log has gone up to 34GB.
We have SQL server Mirror is enabled and principal database is running with Full Recovery Model.
How can I truncate/Shrink Log files? Will it impact on existing mirroring setup? I am very much new to SQL server.
Hi guys, am I know is there any way for disabling/blocking the truncate command so that won't accidentally truncate all the tables within the db in a production server ?
We are doing Reporting for a transaction system. since we do not want to hamper the live database we are planning to do the transactional replication.
Few questions for transactional system.
1. If we replicate a database , then what ever changes happened for the source db will be transferred automatically?
   for ex: If i change a column name of a table in source system, then will it transferred automatically to the replicated db?
2. If we do any change to any of the tables in source system, do we need to recreate the replication and reload the entire data?
3. Also we are planning to enable cdc on this replicated db to enable incremental load to my warehouse. So if we disable the cdc and do a full load into the replicated db, then do we need to perform full refresh on warehouse?
4. Can we replicate on a table level? so that if we reload only the changed table and then reload then there wont be any impact on the over all flow of other tables.
Server A = primary SQL DBs (mirroring origination)
Server B = failover SQL DBs (mirroring destination)
For database mirroring a witness is required.
Can the witness live in another instance of SQL on server B?
Using SQL Server 2008, we would like propose mirroring between two servers of a critical database. Since we initiate, may require to clarify on its purpose and also required changes from application end.Any changes required from OS Level? (I believe both servers IP or Host name should be added in host entries. Mirroring ports should be allowed/open including Principal and mirror server IP Addresses): Windows Team.Any changes required from Application? (Instance name, authentication: user name and its password should be added in web config files): Application Team.Any changes required from Network Team?Also for mirroring both the principal and mirror servers should be with same version, does it only mean SQL Server 2008 versions are enough or does it also mean to say build numbers 10.00.4000 should also be same.URL....
View 5 Replies View RelatedI am using Bulk Copy command for Exporting data table wise from database to csv files and it was working fine. Since last 3-4 days when exporting for some tables data in csv file is coming junk.
View 1 Replies View Relatedi did a Stored Procedure to truncate a table. it contains lots of crap from testing the site. just a simple 1 ALTER PROCEDURE dbo.TruncateUploads
AS
TRUNCATE TABLE Uploads but it says "Cannot truncate table 'Uploads' because it is being referenced by a FOREIGN KEY constraint." then i make NULL all foreign keys and try still cannot. then i did it manually deleting all records then can! but why can't i truncate it? isn't it the same as removing all values plus having the primary keys to start from 0?
How can i TRUNCATE my table (removes rows that were produced at testing), so that in the actual running the automated IDNumber for my table start with 1.
View 6 Replies View Relatedhi, I have two tables members table and orders table.
I have 2 records in members table and zero records in order table.
When I try to truncate members table I get an error message.
cannot truncate table members,because it is being referenced by a FOREIGN KEY constraint.
this what blows my head, There is no records in orders table. so why would the constraint enforced when there is no data in the order table. I created same table in access and I was able to delete a member from the members table. any comments.
thanks
Ahmed
I have several very large tables and sometimes I need to clean them.
It's known that TRUNCATE TABLE works much faster than DELETE, but impossible to use TRUNCATE TABLE on a table referenced by a FOREIGN KEY constraint... Is it possible temporary disable (not delete) constraints and after complition of TRUNCATE enable them ?
Hi,
(From Bol)
"You Cannot Use Truncate Table On A Table Referenced By A Foreign Key
Constraint;"
1) States
Statecode TinyintPrimary Key
Statename Varchar(25)
2) Rivers
RivercodeSmallint Primary Key
RivernameVarchar(40)
3) Riverinstates
StatecodeTinyint,
RivercodeSmallint,
Constraint Pkriverinstates Primary Key(Statecode,Rivercode),
Constraint Fkriverinstates
Foreign Key (Statecode) References States(Statecode),
Foreign Key (Rivercode) References Rivers(Rivercode)
after removing all rows from RiverInStates Table using TRUNCATE and the command completed successfully.
when i tried to remove all rows from Rivers table , i got the following error.
"Server: Msg 4712, Level 16, State 1, Line 76
Cannot truncate table 'rivers' because it is being referenced by a FOREIGN
KEY constraint."
i thought the error may be due to the "Fkriverinstates" FOREIGN KEY CONSTRAINT. so i DROPped the constraint with
ALTER TABLE RiverinStates DROP CONSTRAINT Fkriverinstates
even after DROPping the constraint, im getting the same error
can any one point out where the problem is?
thanks in advance
what is the best way to truncate/delete records from a table at a certain time of the day...... i'm sure this is a simple ?, but i'm still learning sql.
thanks,
eddie
any idea why this is not wroking ?
------------------------------
declare
@TableName varchar
DECLARE
EmptyTables CURSOR FOR
Select Table_Name From Information_Schema.Tables
Where Table_Type = 'Base Table' Order By Table_Type
open EmptyTables
FETCH NEXT FROM
EmptyTables
into
@TableName
WHILE @@FETCH_STATUS = 0
BEGIN
truncate table @TableName
FETCH NEXT FROM
EmptyTables
into
@TableName
END
close EmptyTables
deallocate EmptyTables
I have a database of 25 GB. I truncated a table which holds around 5 GB of data.
Even after truncation, I see my database size as 25 GB...
Should I run a shrink database after the truncation?
Thanks
Santhosh
I have somme users who need to truncate some tables owned by DBO. I know that only table owner or DBO can execute TRUNCATE TABLE but I don't want grant DBO permission to those users. Do you have any suggestion ? Thanks a lot.
View 4 Replies View RelatedIf I have a truncate table statement in a stored proc, will my log backups be compromised due to the nonlogged operations. If so, what are my alternatives in case that I need to restore? Differential backups?
View 1 Replies View RelatedI am doing the following-
begin transaction
truncate table Acounts
select * from Accounts
rollback
select * from Accounts
The first select is returning 0 rows as expected. But after doing the rollback I expected to yet see 0 rows as truncate is not logged so cannot be rolled back. But to my suprise I see that there are rows.
So the rollback is rolling back the truncate table statement. Can someone please explain this????
I know that only the owner of a table can truncate it.
I want a user to run a procedure that truncates a table. Both the procedure and the table are owned by dbo, however the system says that the user can't truncate the tables because she doesn't have permission. The user has dataread and datawrite global permissions, and I do not want to give her dbo perimssions.
Is there a solution to this?
Hi all,
Is it possible to TRUNCATE a table and BCP data into the same table in one
TRANSACTION?
My problem is that I want to refresh(delete and via BCP append new data) a
table without disturbing running applications. Can I run BCP from a
SQL-script or a stored procedure?
Thank`s
Jonas Dahlqvist
Alfa Laval Automation AB
Does anybody know of a way to allow non-administrators to execute the truncate table statement?
I have developers that from time to time need to move data between their databases usinge the DTS wizard. Most of their tables have identity columns and in order retain the identity seed, they need to click on the option to enable identity insert. This option isn't available to non administrators.
Error Message "Cannot TRUNCATE TABLE 'HR.dbo.Employee' ".
All of a sudden (!) I began to get this error whle attempting to run a multi-step job: This is during a very simple T-SQL statement.
Executed as user: EPRODSQLAdmin. Cannot TRUNCATE TABLE 'HR.dbo.Employee' because it is being referenced by object 'v_apps_Employee'. [SQLSTATE 42000] (Error 3729). The step failed.
Tables are being referenced by views all the time... Why would I begin to get this message?
The only thing I can think of is that I had just made my first "indexed view" ever, and it is in this database. Could that be related to the new error message?
HI,
I am trying to find a replication solution. It does not have to be real-time, but snapshot will not work since the database is too big. I was trying to configure Transactional replication. The replication itself worked good, but the Truncate table is not allowed in the transactional replication and merge replication. We have to use "Truncate table" in another processes during replication. Is there any other option or third party application I can use to do the replication with truncate table working. I tried Replication Exec, but it does not support 64bit system, which we have.
Hi group,In one of the books 'Gurus Guide to Transact SQL' i found this info:------------------------------------------------------------TRUNCATE TABLE empties a table without logging row deletions in thetransaction log. It can't be used withtables referenced by FOREIGN KEY constraints, and it invalidates thetransaction log for the entire database.Once the transaction log has been invalidated, it can't be backed upuntil the next full database backup.------------------------------------------------------------Does it mean that the log backup taken after table truncation is aninvalid backup?Help me! i'm lost....Thanks in advanceRonin*** Sent via Developersdex http://www.developersdex.com ***
View 5 Replies View RelatedHi,I am trying to create a script that deletes transaction tables and leavesmaster data like customer, vendors, inventory items, etc. How can I useTRUNCATE TABLE with an Exists? My problem is I have 200+ tables, if Isimply use a list like:truncate table01truncate table02truncate table03....I get errors if the table does not exist and have to manually run thetruncate statements. Some tables may not exist if that part of the app isnever used. I'm trying to make a list of all tables that could existwithout it erroring out 50+ times.Thanks in advance.
View 2 Replies View RelatedI have a cursor looping through a list of tables that I want totruncate and then do a bulk insert into, Is this possible in SQLServer 2000 or do script each table individually.Cheers,Adam
View 2 Replies View RelatedHi,We have a heavily used production server and a table which logs everyhit on a web site. This table has grown large over time and we want toclear it down as efficiently as possible. We would like to issue atruncate table statement, but with millions of rows we are a bit waryof how this will affect server performance. The alternative is todelete is stages using rowcount but of course this will generate alarge amount of logging.Can anyone confirm whether issuing a truncate table will have anyaffect on performance - i.e. does it just clear a header block ordooes it have to do more?CheersMartin
View 3 Replies View RelatedHi ,
I truncate and Delete the table. What is the differnce between following :
Trunacate table employee_master
delete from employee_master
I heared that After delete records from table through
"delete from employee_master"
data can be rollback using log file,But How ?
Waiting for response............
Regards
Nikhil Chaturvedi
Hi,
I need to truncate the Destination table every time before the data is loaded.
I had checked out in OLE DB Destination properties but couldn€™t find any information on truncate table.
EXP:
In INFORMATICA we have a properties setting for truncating the table every time the data get loaded.
I€™m looking for this option in SSIS can any one guide me on this.
Thank you,
I have just updated to SQL server Everywhere(Compact) version from SQL Server Mobile. A desktop application was using several features of the Mobile version which no longer seem to be available in the Everywhere version. 'Truncate Table' does not work. This can be worked around with deleting the rows and then changing the Identity seed value. Also 'INSERT INTO Table1 SELECT * FROM Table2 no longer works in SQL Everywhere. Now the number of columns in the two tables must match exactly or a list of columns must be provided with the INSERT and SELECT statements. The biggest probem I have run into so far is that 'SELECT * INTO Table1 FROM Table2' no longer works. How can a new table be created without manually recreating all of the column information?
These functions worked in the SQL Mobile version, why was this functionally removed in the latest Everywhere(Compact) version.
Is there a listing of what is supported in the Everywhere(Compact) version, besides digging through the BOL documentation.