I copied over a small website to 2003 Web Server and got:
Exception Details: System.Data.SqlClient.SqlException:
Failed to update database
"D:INETPUBWWWROOTLUNCHCOUNTAPP_DATALUNCHCOUNT.MDF" because the
database is read-only.
It works just fine in VS - what to do?
Thanks
we have a database that only serves Select requests (no OLTP) for our very high traffic websites.
what are the benefits of turning on read-only setting for the database if there are no transactions occuring in the database?
does sql server put locks on tables for SELECT statements?
is it the same as using HINT (NOLOCK) ?
thanks
stephane
Using SQL Express in this case, I have a database on one machine using one instance of SQLExpress that I detach. I then copy the database to a USB drive and take it to a different machine and attach it to a different SQL Express instance and it comes in as ReadOnly and I know of no way to change it.
One difference is that I have different users on the two systems, is that the cause? I wouldn't think that this would cause the database to show as ReadOnly, thoughI would just think that I may not be able to access it aside from using sa.
What is the likely cause of this?
Thanks
We have database when trying to make read only throwing below error: with stack dump
Location: recovery.cpp:4517
Expression: m_recoveryUnit->IsIntendedUpdateable ()
SPID: 51
Process ID: 6448
Msg 926, Level 14, State 1, Line 1
Database 'XXXX' cannot be opened. It has been marked SUSPECT by recovery.
See the SQL Server errorlog for more information.
Msg 5069, Level 16, State 1, Line 1
ALTER DATABASE statement failed.
Msg 3624, Level 20, State 1, Line 1
A system assertion check has failed. Check the SQL Server error log for details. Typically, an assertion failure is caused by a software bug or data corruption. To check for database corruption, consider running DBCC CHECKDB. If you agreed to send dumps to Microsoft during setup, a mini dump will be sent to Microsoft. An update might be available from Microsoft in the latest Service Pack or in a QFE from Technical Support.
Msg 3313, Level 21, State 2, Line 1
During redoing of a logged operation in database 'XXXX', an error occurred at log record ID (0:0:0). Typically, the specific failure is previously logged as an error in the Windows Event Log service. Restore the database from a full backup, or repair the database.
Msg 3414, Level 21, State 1, Line 1
An error occurred during recovery, preventing the database 'XXXX' (database ID 7) from restarting. Diagnose the recovery errors and fix them, or restore from a known good backup. If errors are not corrected or expected, contact Technical Support.
Investigation DONE:
- DBcc checkdb shown Clean
- database is online and able to access
-Detached database and attached with rebuild log, still could not bring database read_only
SQL version : SQL server 2008 SP4.
How to run the profiler on always on read only database to troubleshoot an ssrs issue ?
View 0 Replies View RelatedI have downloaded and installed ASP.NET Ajax Sample applications from
http://ajax.asp.net/default.aspx?tabid=47&subtabid=471
I am trying to run the AJAX TaskList example under C:ProgramMicrosoft ASP.NETASP.NET AJAX Sample Applicationsv1.0.61025TaskList
First I moved the content of the TaskList folder to a virtual IIS directory, making it possible to debug the website on my local IIS server.
When I run the example I get prompted to Login or register as a new user. When I submit the registration form I receive the following error message:
Failed to update database "C:INETPUBWWWROOTTASKLISTAPP_DATAASPNETDB.MDF" because the database is read-only.
How can I modify the permissions for ASPNETDB.MDF in order to run the TaskList example.
Thanks
Hi,
I have sciprt that assign object
permissions to all databases.
I want to exclude all read only and dbo use only databases
Thank you
Alex
Hi,
We have a SQL server database on remote server. We are using ODBC connection to read and write into the table. But we have another user wants to retrieve(readonly access) our data on his pages. How can we create a user on our database and grant readonly access to that user?
Thanks..
Dear All,
I need experienced advice on Security in SQL Server 2005. All I need specific advice on restrcting users to access SQL Server database to have only READ access for certain tables.
Thanks,
I am having a SSIS package which imports data from Excel (2003) files on the netoprk.
Its so happenning that one of those files are opened by someone else & package is giving AcquireConnection error.
As Package is only reading data from the files, i want to open the files in ReadOnly mode
How can remove this error ?
Is there any way to provide a readonly custom property in the ProvideComponentProperties() method of a custom PipelineComponent implementation?
View 7 Replies View RelatedI'm having trouble with a script component in which I'm trying to use two ReadOnlyVariables. If I use only one of the two variables, everything works without issue. If I use both of the variables (as part of a comma-delimited list) I get the following:
The variable cannot be found. This occurs when an attempt is made to retrieve a variable from the Variables collection on a container during execution of the package, and the variable is not there. The variable name may have changed or the variable is not being created.
I don't believe the variables themselves are the problem. Both are scoped to the package level and I can use either of them if I have it as the only variable. Seems bug-like, but thought I'd get some ideas before pursuing that route.
I have two replicated databases i.e.
1. Database 1 is a live database where all live applications point
2. Database 2 is a replica of Database 1 and all reporting / BI applications point to this db. This is read-only.
Is it possible for reporting applications, pointing to Database 2, to create temporary tables in the read-only database?
Thanks
Hi experts,
Pls let me know , how to make normal db to readonly + accept tran logs
Rgds
Srinivas Varanasi.
Hi,I have a prod database (main bread & bread DB) and have a small accessdatabase that sales team is using... I created a login inside SQL 2000and gave db_read permission and SELECT permissions... and public.Role of public is EXEC store procs and view some systables...I linked those tables that I gave permissions through ODBC link intoaccess db with the user that I created inside SQL as readonly user...but to my surprise when I ran a insert query from access on SQLtables... I was able to update and insert data... if my ODBC link isonly for readonly.. why was I able to unpdate & insert data into SQLtable?I don't want to give write/update/insert permissions for SQL tables tosales team... or anyone outside SQL 2000 server DB.Is there any easy way to create viewonly users inside SQL?I created users like this: security -logins -new login...select none serverrole.. db access (bread & butter DB)Thank you,hj******Pardon my English...
View 1 Replies View RelatedAny idea to copy a standby/readonly database. We a have a standby/readonly DB from logshipping for hot standby and we would like to make a copy of this standby/readonly DB into a read/write DB in the same server for daily testing. Thanks in advance!
View 6 Replies View Related
Hi,
I have a database running on sqlserver 2000. This database (let's call it TestDatabase) has 2 filegroups called 'PRIMARY' and 'SECONDARY', and is bulk-logged. The 'SECONDARY' filegroup is set to readonly since no data gets changed there by the applications, it is read-only data. Sometimes this read-only data needs an update, so I need to update the data in the 'SECONDARY' filegroup by running some long data-operations. These data-operations are executed and checked on a another database (which is a backup of TestDatabase) called TestDatabaseDemo. When everything is correct in TestDatabaseDemo we can copy all objects from the 'SECONDARY'-filegroup of TestDatabaseDemo to the 'SECONDARY'-filegroup of TestDatabase using DTS. This takes a long time and I want to try if I could speed up things by using the following strategy:
Take a full backup of TestDatabase
Restore full backup as TestDatabaseDemo
Run long-running data-operations on TestDatabaseDemo
Take a backup of TestDatabaseDemo
Restore only the 'SECONDARY'-filegroup from TestDatabaseDemo to TestDatabase, and keeping the 'PRIMARY' filegroup from TestDatabase as it was at that moment.
Suppose we arrived at step 5, I am executing the following commands:
Code Snippet
--make full backup of TestDatabase
backup database TestDatabase to DISK='G: emp estdatabase.bak' with init
--make full backup of TestDatabaseDemo
backup database TestDatabaseDemo to DISK='G: emp estdatabasedemo.bak' with init
backup log TestDatabase to DISK='g: emp estdatabase.log'
--restore secondary filegroup from TestDatabasedemo-backup
restore database TestDatabase FILEGROUP='SECONDARY' FROM DISK='G: emp estdatabasedemo.bak'
with move 'TestDatabase_Data_Secondary' to 'G: empTestDatabase_Data_secondary.ndf', NORECOVERY
--restore primary filegroup from Testdatabase-backup
restore database TestDatabase FILEGROUP='PRIMARY' FROM DISK='G: emp estdatabase.bak'
with move 'TestDatabase_Data' to 'G: empTestDatabase_Data.mdf', NORECOVERY
--restore log and try to get db onlin
restore log TestDatabase FROM DISK='g: emp estdatabase.log' with recovery
I get the following error:
The log in this backup set terminates at LSN 6000000021500001, which is too early to apply to the database. A more recent log backup that includes LSN 6000000022400003 can be restored.
When trying to execute "RESTORE DATABASE TestDatabase WITH RECOVERY; " as last statement
I get error:
The database cannot be recovered because the files have been restored to inconsistent points in time.
How i can restore the read-only filegroup correctly?
Hi,
I am trying to implement a log shipping scenario in sql 2005 where the secondary server is in standby mode with the ability to roll change during failover.
With the help of BOL (ms-help://MS.SQLCC.v9/MS.SQLSVR.v9.en/udb9/html/2d7cc40a-47e8-4419-9b2b-7c69f700e806.htm) I can implement my scenario in Recovery mode, but not in standby mode. I use the following sql to put my primary in standby
BACKUP LOG [database]
TO DISK = @filename
WITH STANDBY = 'C:Program FilesMicrosoft SQL ServerMSSQL.1MSSQLBackupROLLBACK_UNDO_database.BAK'
GO
which works, but then my restore job fails on the last step. How can I put my primary db in standby mode in such a way that the log shipping restore will work?
Thanks
Andy
Hi,
I was just wondering if anybody came across this behaviour where closing a Fast Forward Read only cursor takes abnormally long time to close. I am running SQL Server 2005 standard edition.
Thanks
Nand
sir
I have got this error message to establish connction with recordset vb .net, Can you please rectify this
Too many arguments to 'Public Overridable ReadOnly Default Property Fields() As ADODB.Fields'
my code like this
rs = New ADODB.Recordset
rs.Open("Select * from UserLogin where userid='" & txtUserName.Text & "'", gstrDB, DB.CursorTypeEnum.adOpenStatic)
If txtUserName.Text = rs.Fields.Append(userid) Then
MsgBox("OK", MsgBoxStyle.OKOnly, "Confirmation")
End If
thanks
Hi,
I developed a simple custom control flow component which has several read/write properties and one readonly property (lets call it ROP) whichs Get method simple returns the value of a private variable (VAR as string). In the Execute method the VAR has a value assigened. When I put the value of ROP or VAR into MsgBox I can see the correct value. However when I execute the component I can not see the value of the ROP in the property window. I see the property but its value is empty string. For example when I put a breakpoint to postexecute or check the property before click OK in a MsgBox I would expect that the property value would be updated in SSIS as well. Is there a way how to display correct values of custom tasks properties in property window?
Thanks for any hints.
We replicate a SQL2000 database (DataBaseA) to a SQL2000 database (DataBaseB) by using the Restore function and hasn't change its logical name but only the physical data path and file name. It is running fine for a year. We use the same way to migrate the DataBaseB to a new SQL2005 server with the Restore function and the daily operation is running perfect. However, when we do the Backup of DatabaseB in the SQL2005, it just prompt the error message
System.Data.SqlClient.SqlError: The backup of full-text catalog 'DataBaseA' is not permitted because it is not online. Check errorlog file for the reason that full-text catalog became offline and bring it online. Or BACKUP can be performed by using the FILEGROUP or FILE clauses to restrict the selection to include only online data. (Microsoft.SqlServer.Smo)
Please note we left the DataBaseA in the old SQL2000 server.
Please help on how we can delete the Full-text catalog from DatabaseB so we can do a backup
Many Thanks
I have database on localhost and i want to show this data on my website. I want to create a database online and want to sync with Local Host. Can it be possible syncing data automatically after some interval?
View 6 Replies View Relatedyes,I have an error, like 'The database file may be corrupted. Run the repair utility to check the database file. [ Database name = SDMMC Storage Cardwinpos_2005WINPOS2005.sdf ]' .I develope a program for Pocket Pcs and this program's database sometimes corrupt.what can i do?please help me
View 4 Replies View RelatedI want to create a duplicate database in sql 2000 using asp.net from a webform
I created a database using CREATE DATABASE .......
But how to copy tables, views, stored procedures to newly created
database from old using asp.net from webform
Is there any another method to create a duplicate database with another name
from existing database on same server ?
Greetings, I have just arrived back into the country (NZ) and back into ASP.NET.
I am having trouble with the following:An attempt to attach an auto-named database for file (file location).../Database.mdf failed. A database with the same name exists, or specified file cannot be opened, or it is located on UNC share.
It has only begun since i decided i wanted to use IIS, I realise VWD comes with its own localhost, but since it is only temporary, i wanted a permanent shortcut on my desktop to link to my intranet page.
Anyone have any ideas why i am getting the above error? have searched many places on the internet and not getting any closer.
Cheers ~ J
I have a problem when i restore my .DAT_BAK file. I am getting error like "The backup set holds a backup of a database other than existing database. Restore Database is terminating abnormally".
I tried by using
RESTORE DATABASE <DATABASENAME>
FROM DISK = 'D:DATAMYTEST.DAT_BAK'
WITH MOVE 'VZAI_DATA' TO D:PROGRAM FILES..MSSQLTEST.MDF',
MOVE 'VZAI_LOG' TO D:PROGRAM FILES..MSSQLTEST.LDF',
REPLACE
And also i tried like
RESTORE DATABASE <DATABASENAME>
FROM DISK = 'D:DATAMYTEST.DAT_BAK'
WITH REPLACE
When i use like this,
RESTORE FILELISTONLY FROM DISK = 'D:DATAMYTEST.DAT_BAK'. I am able to get the output as LogicalName, PhysicalName, Type, FileGroupName, Size, etc.
Can i anyone please help me out?
Thanks in Advance,
Anand Rajagopal
I am using SQL express and Visual web developer on windows Vista.
When I try to create a new database the following message appears.
CREATE DATABASE permission denied in database master (error 262)
I log on to my computer as an administrator.
Help appreciated
Prontonet
Hi all,
From the http://msdn.microsoft.com/en-us/library/bb384469.aspx (Walkthrough: Creating Stored Procedures for the Northwind Customers Table, I copied the following sql code:
--UpdateSPforNWcustomersTable.sql--
USE NORTHWIND
GO
IF EXISTS (SELECT * FROM sysobjects WHERE name = 'SelectCustomers' AND user_name(uid) = 'dbo')
DROP PROCEDURE dbo.[SelectCustomers]
GO
CREATE PROCEDURE dbo.[SelectCustomers]
AS
SET NOCOUNT ON;
SELECT CustomerID, CompanyName, ContactName, ContactTitle, Address, City, Region, PostalCode, Country, Phone, Fax FROM dbo.Customers
GO
IF EXISTS (SELECT * FROM sysobjects WHERE name = 'InsertCustomers' AND user_name(uid) = 'dbo')
DROP PROCEDURE dbo.InsertCustomers
GO
CREATE PROCEDURE dbo.InsertCustomers
(
@CustomerID nchar(5),
@CompanyName nvarchar(40),
@ContactName nvarchar(30),
@ContactTitle nvarchar(30),
@Address nvarchar(60),
@City nvarchar(15),
@Region nvarchar(15),
@PostalCode nvarchar(10),
@Country nvarchar(15),
@Phone nvarchar(24),
@Fax nvarchar(24)
)
AS
SET NOCOUNT OFF;
INSERT INTO [dbo].[Customers] ([CustomerID], [CompanyName], [ContactName], [ContactTitle], [Address], [City], [Region], [PostalCode], [Country], [Phone], [Fax]) VALUES (@CustomerID, @CompanyName, @ContactName, @ContactTitle, @Address, @City, @Region, @PostalCode, @Country, @Phone, @Fax);
SELECT CustomerID, CompanyName, ContactName, ContactTitle, Address, City, Region, PostalCode, Country, Phone, Fax FROM Customers WHERE (CustomerID = @CustomerID)
GO
IF EXISTS (SELECT * FROM sysobjects WHERE name = 'UpdateCustomers' AND user_name(uid) = 'dbo')
DROP PROCEDURE dbo.UpdateCustomers
GO
CREATE PROCEDURE dbo.UpdateCustomers
(
@CustomerID nchar(5),
@CompanyName nvarchar(40),
@ContactName nvarchar(30),
@ContactTitle nvarchar(30),
@Address nvarchar(60),
@City nvarchar(15),
@Region nvarchar(15),
@PostalCode nvarchar(10),
@Country nvarchar(15),
@Phone nvarchar(24),
@Fax nvarchar(24),
@Original_CustomerID nchar(5)
)
AS
SET NOCOUNT OFF;
UPDATE [dbo].[Customers] SET [CustomerID] = @CustomerID, [CompanyName] = @CompanyName, [ContactName] = @ContactName, [ContactTitle] = @ContactTitle, [Address] = @Address, [City] = @City, [Region] = @Region, [PostalCode] = @PostalCode, [Country] = @Country, [Phone] = @Phone, [Fax] = @Fax WHERE (([CustomerID] = @Original_CustomerID));
SELECT CustomerID, CompanyName, ContactName, ContactTitle, Address, City, Region, PostalCode, Country, Phone, Fax FROM Customers WHERE (CustomerID = @CustomerID)
GO
====================================================================================
I executed the above code in my SQL Server Management Studio Express (SSMSE) and I got the following error messages:
Msg 911, Level 16, State 1, Line 1
Could not locate entry in sysdatabases for database 'NORTHWIND'. No entry found with that name.
Make sure that the name is entered correctly.
===============================================================================================================
I know I recreated the NORTHWIND Database from a different Database before and I did not do anything for the entry in sysdatabases. How can I change the entry in sysdatabases for database 'NORTHWIND' now? Please help and advise.
Thanks in advance,
Scott Chang
hii want to copy one database table to onther database table using script?my database is ms-sql server 2000
View 4 Replies View RelatedI recently added a new user to my database. Now I want to delete that user, but I keep getting the error above. What do I need to do to delete my recently added user?
View 4 Replies View RelatedWe have a SQL database that uses Active Directory with Windows Authentication. Can users that are members of the Active Directory group that has read/write access to the SQL database create ODBC connections to access the database directly and update the data? They dont have individual logins on the server. They are only members of the Active Directory group that has a login?
View 1 Replies View RelatedI had to to relocate the database log file and I issued an Alter database command but by mistake I put a space in the file name as below. The space is at the beginning file name. Now I am unable get the database loaded to SQL Server. The database has 2 replications configured, so deleting and re-attaching the database means the replication needs to be re-configured. Is there an alternative way to issue a command to update the database FILENAME ? Not sure if this can be edited in master database (sys files).
ALTER DATABASE [User_DB]
MODIFY FILE (NAME = User_DB_log, FILENAME = 'I:SQLLogs User_DB_log.ldf')
GO