Hello all,
I just restored a SQL 7 db using the Enterprise Manager GUI interface. I
selected the "Leave database nonoperational, but able to restore additional transaction logs" option. I should not have selected this option as I do not have any transaction logs to apply.
Anyway, my question is... Is there a way to mark the database as opertational without running the restore again?
Thanks,
Corey
Hi All,
im trying to set up database mirroring and in the initial phase of database restoring im getting some problem.
the scenario is .
1- i create a tempDB on server1(which will be principal server) and backup full and transaction logs.
2- create tempDB in server 2( going to be used as mirror) .
3- restore the full backup of "tempDB" from server1 with NORECOVERY option.
this step results in a message box showing that the restore was successfull...
but the database explorer( management studio) shows the tempDB in (restoring ...) state. and no more operations can be performed with this Database. ( because teh databse isin restoring mode).. please help what this issue is?
Thanks In Advance for any suggestions
Hi,
How can I use the NORECOVERY or RECOVERY option to restore the database?
THANKS
Novice question ...
We are running a simple replication whereby we backup the PROD server once, restore onto STANDBY and then run a SP every 5 minutes on PROD that dumps the transaction log and then calls a SP on STANDBY to apply the log to STANDBY. My problem is that both the initial restore and all subsequent logs appear to need the "WITH NORECOVERY" option which leaves the database unusable. BOL says to 'use "WITH NORECOVERY" on all log restorations except the final'. Problem is, because the whole process is automatic, we have no way of telling which of the logs is going to be the last !!!. So, my questions are, 1) am I doing it right and 2)what would happen if a log was applied twice, would SQL know and not apply it ?
We are using SQL Server 2012 for both production and development server. Currently, i have plan to transfer the full backup of SQL server database to the development server and then restore it on the development server for testing purpose, so we don't want to disturb on the production.
I have successfully backup the database from the production server and transfer to the development server. however, i encounter some difficulties when trying to do restore. my question is:
1. do i need to firstly create an empty database on the development server and then restore it into this empty database? say i create database call "Test2", then i perform a restore into this database.
2. currently, there is already an existing database being restored previously in the development server and this database is actually the older version of the backup that being restored by the previous engineer. should i remove this database first and restore a new one or both of the database can coexist as long as we put different name for the database?
I'm working on SQL 2012 Box, which is having Logshipping failed on secondary database, the secondary database was in stand by mode right now but no more restore operation performed on this database since 2 weeks! We checked in the SQL error log and found the error code 14421, severity 16, stat: 1
How to reset the logship back to normally, do I need to disable the jobs before proceed any operation!
in the process of migrating a big db from server 1 to server 2, we had to roll back the change. I started with taking a full db backup and restoring it on server 2 with norecovery, and then a couple logs with norecovery, and then the last log with recovery.
Is there some way to continue this chain now, I mean to change the db to norecovery, or other way to restore logs.Â
I dont want to do a new full backup.
If I try to do a log restore now i get the message:
Msg 3117, Level 16, State 4, Line 1
The log or differential backup cannot be restored because no files are ready to rollforward.
Msg 3013, Level 16, State 1, Line 1
RESTORE LOG is terminating abnormally.
We had a siutation last night in our production environment that forced us to revert back to an earlier version of the database (before a major code rollout that failed). After restoring the days full backup (with NORECOVERY), and then restoring a DIFF backup (FULL RECOVERY and had checked Preserve Replication Settings)...the transaction replication failed.
Message #1
The replication agent has been successfully started. See the Replication Monitor for more information.
Message #2
2011-03-04 15:07:17.566 Copyright (c) 2008 Microsoft Corporation
2011-03-04 15:07:17.566 Microsoft SQL Server Replication Agent: logread
2011-03-04 15:07:17.566
2011-03-04 15:07:17.566 The timestamps prepended to the output lines are expressed in terms of UTC time.
2011-03-04 15:07:17.566 User-specified agent parameter values:
[code]....
I've tried reinitializing the publication/subscription and while that took brand new snapshots and copied it over to the replicated data server, it did not fix the problem.I read from a different post that I could try running "sp_replrestart" but that ran for about a half an hour and didn't appear to do anything but fill up our log files...did I not wait long enough?
The only thing I know to do at this point is to drop the publication on the production server and rebuild it completely (and with all the tables we're replicating that would take quite a bit of time.
Pages on a full recovery model database corrupted, need to ensure data loss is minimal for restore operation am thinking about restoring the latest full backup.
View 4 Replies View Relatedhello everybody
I have custom log shipping .
it run every 15 min
DB1 located on Server1
DB1 backup logs to server 2
DB2 located on server 3(300 km away from server1 and server 2)
Db2 restore logs from server 2
If server1 and server2 become unavailable
1.
Would enough login to server3
and
run
RESTORE DATABASE Db2
WITH RECOVERY
to bring db from read only to production mode up last restored log?
Thank you
Alex
I'm trying to RESTORE LOG with a different recovery path. Is there a way to do this? I'm getting the below error. I know I could RESTORE from the beginning, but need to RESTORE the log file to the same database schema but different database and server. What steps do I need to do?
This backup set cannot be applied because it is on a recovery path that is inconsistent with the database. The recovery path is the sequence of data and log backups that have brought the database to a particular recovery point. Find a compatible backup to restore, or restore the rest of the database to match a recovery point within this backup set, which will restore the database to a different point in time. For more information about recovery paths, see SQL Server Books Online.
We have an issue with a 3 node SQL 2012 Always on availability group. Normal operation is node 1 (primary replica) with node 2 and node 3 as secondary replicas.After some patching, SQL wasn't running on node 1 hence the AG flipped over to node 2. This went unnoticed for some time and the transaction log for one of the AG databases became full on node 2 and node 3. (I think this is because it couldn't commit the transactions on node 1 so couldn't truncate it's t-log?) The DB is using synchronous replication btw.So I started SQL on node 1 and flipped the AG back to node 1 (with a data loss warning but I accepted this).Now the issue is that on node 2 and 3, the DB in question is stuck in a "Reverting / In Recovery" State. I've tried various commands such as ALTER DATABASE SET ONLINE, RESTORE DATABASE WITH RECOVERY etc but these fail stating unable to obtain a lock on the DB.
The weird thing is that on node 1 the state of the DB is "synchronised".how to resolve this issue on node 2 and 3? I've left them overnight (in case they were rolling back transactions, the DB is fairly large) but nothing seems to have happened. remove the DB from the AG in node 2 and 3 and add it back in again, ie recreate the replication?
Hello,
I have a file backup of a database from machine 1. I create an empty database with the same name on machine 2 and copied the backup file to machine 2. When I run a restore database, I get "Preceeding restore operation did not specify WITH NORECOVERY OR WITH STANDBY.Restart tehe restore sequence, specify the options for all but the final step. Restore failed"
Database : SQL 7.0 Trying to restore from the Enterprise manager
ANy clues as to what might be wrong.
Thanks, MMS
SQL Server 2008 R2
I don't see a "general discussion" thread and this is the closest i think.
I just have a general question: if my backup window is from 8am to 10am, and i do a restore within that backup window, what will happen? assuming we're talking only of a single database, ACME.
I'm comparing because with Oracle RMAN, it pukes when i do a restore while the backup is going on. it would complain of unable to find some archive logs.
I am trying to imitate a DR situation where the primary db is down and I need to recover the secondary db on another server. They are a log shipping pair and so to imitate a DR, I remove the log shipping in the primary server maintenance plan. Then I go to the secondary server and disable the log shipping jobs there and attempt to do the following
RESTORE DATABASE database_name WITH RECOVERY
but I can't get exclusive use because the database is in use. But I don't see any other users... am I wrong in thinking that the log shipping was completely deleted? Anything I can do to force exclusive access?
I am set up log shipping  as backup and copy every one hour and restore every ( disconnect users and stand by) one hour on servers in same domain. Set-up completes successfully.Copy job works as expected. but the restore job fails intermittently to restore the .trn file saying ' could not apply  log, data invalid' .
when i  delete and copy the files for which restore failed  manually using CTRL+C and CTRL+V across network and re run the restore job it does restore successfully . Through out the day i get about 5-6 problematic .trn files on secondary server which are copied from primary server and when restore fails i have to manually delete the log file which had problem restoring and then copy that file again using CTRL+C and CTRL+V  then run the restore and it gets restored successfully.when running restore filelistonly on the logfile in issue on secondary server  it gives below error
Cmd:
RESTORE verifyonly
FROM disk='G:xxxx_Copyxxx_20150604010501.trn'
Error:
Msg 3203, Level 16, State 1, Line 2
Read on "G:xxxxxxx_20150604010501.trn" failed: 13(The data is invalid.)
Msg 3013, Level 16, State 1, Line 2
VERIFY DATABASE is terminating abnormally.
and when i run restore filelistonly using netwok path then is seem s good and i can restore the logs as well
CMD:
RESTORE verifyonly
from disk='1.2.3.4xxx_Backupsxxx_20150604010501.trn'
Output:Â The backup set on file 1 is valid.I can assure there is no corruption on the log back up, no lsn mismatch, no log files missing.Same version and edition on both servers. Both servers are SQL server 2012 Enterprise edition on window server 2012Â
Given the follwoing scenario: You create a snapshot of a database with full recovery model, change it's recovery model to simple, then perform several updates/modifications on the database, before you finally (due to an error) restore the database from the snapshot.
Will the log chain be broken or not? The resteore sets the recovery model back to full, but I'm still a bit "curious" about the transaction logs.
I make two full backups on Oct 1 and Oct 10. I want to restore the server to a state in Oct 5. So I just do as follows:
Â
Perform a transaction log backup on the server on Oct 23. I have never backup transaction log in the past. Restore the server with Oct 1 full backup with NORECOVERY option.Try to restore to the point at Oct 5 12:00, with the transaction log.
Â
But the restore fails and  SQL Server said the transaction log does not contain the point. The point is too early. Why? Also my .LDF file is about 13G, but the transaction log backup is only 200MB. Why?
how to restore database backups with different recovery fork. I have 1-full backup 2-diff backups and 10-tran backups. My prod database in mirror, so after error, switched to mirror with "allow_data_loss" option. And now I have full and diff backup with one recovery fork GUID and other backups with another GUID.So the question is, how to restore all this backups if in middle of restoration will be different recovery fork.Tryed to restore log backups with new fork guid and got error:This backup set cannot be applied because it is on a recovery path that is inconsistent with the database. The recovery path is the sequence of data and log backups that have brought the database to a particular recovery point. Find a compatible backup to restore, or restore the rest of the database to match a recovery point within this backup set, which will restore the database to a different point in time.
View 2 Replies View RelatedHello,
I would like to restore SQL Server Express and its databases from a tape backup to the same server. This is a disaster recovery senario.
I backed up the Master, Model, MSDB and my own test database using SQLCMD scripts. I have no problem restoring these using task manager on the server before the disaster recovery.
However, in my real disaster recovery testing, When the server is restored by tape drive (HP one button disaster recovery), I try to run my SQLCMD restore scripts in task manager and I cannot connect to the sql server. Also I cannot connect with Management studio. I have recieved the following error in event viewer.
----------------------------------------------------------------
Event Type: Error
Event Source: MSSQL$SQLEXPRESS
Event Category: (2)
Event ID: 3411
Date: 9/15/2006
Time: 8:16:36 AM
User: N/A
Computer: COPLEYNEWS
Description:
Configuration block version 0 is not a valid version number. SQL Server is exiting. Restore the master database or reinstall.
Data:
0000: 53 0d 00 00 15 00 00 00 S.......
0008: 16 00 00 00 43 00 4f 00 ....C.O.
0010: 50 00 4c 00 45 00 59 00 P.L.E.Y.
0018: 4e 00 45 00 57 00 53 00 N.E.W.S.
0020: 5c 00 53 00 51 00 4c 00 .S.Q.L.
0028: 45 00 58 00 50 00 52 00 E.X.P.R.
0030: 45 00 53 00 53 00 00 00 E.S.S...
0038: 00 00 00 00 ....
Event Type: Warning
Event Source: SQLBrowser
Event Category: None
Event ID: 3
Date: 9/15/2006
Time: 8:16:36 AM
User: N/A
Computer: COPLEYNEWS
Description:
The configuration of the AdminConnectionTCP protocol in the SQL instance SQLEXPRESS is not valid.
Event Type: Error
Event Source: Service Control Manager
Event Category: None
Event ID: 7024
Date: 9/15/2006
Time: 8:16:36 AM
User: N/A
Computer: COPLEYNEWS
Description:
The SQL Server (SQLEXPRESS) service terminated with service-specific error 3411.
C:Program FilesMicrosoft SQL Server90ToolsBinn>sqlcmd -S.SQLExpr
COPLEYNEWSDATABASEscriptsMASTERFULLRESTORE.sql"
HResult 0x2, Level 16, State 1
Named Pipes Provider: Could not open a connection to SQL Server [2].
Sqlcmd: Error: Microsoft SQL Native Client : An error has occurred whi
shing a connection to the server. When connecting to SQL Server 2005,
re may be caused by the fact that under the default settings SQL Serve
allow remote connections..
Sqlcmd: Error: Microsoft SQL Native Client : Login timeout expired.
----------------------------------------------------------------------
My question is, what is the correct procedure to follow when I want to do a disaster recovery and restore SQL Server Express from tape backup using the Simple Backup method and scripts.
Is it always required to reinstall sql server express from the original program file or is it possible to reinstall from back up tape.
I know my backup and restore scripts work because I tested them on the server before I do the disaster recovery and rebuild that server from tape.
This is some kind of issue with SQL Server Express being restored by tape backup.
Any suggestions, thanks.
Hi,
I run 2 steps viz with NORECOVERY and with RECOVERY in sequence as SQP jobs. The 2nd step fails some times. When it starts failing, I run full backup of the production server again and the 2nd step starts succeding. Unless I run the full backup the 2nd step keeps on failing.
What are the conditions which generate for [SQLSTATE 42000] (Error 3013) and how to tackle this problem.?
The 2 steps are :-
1.RESTORE DATABASE ARSYSTEM
FROM DISK = 'E:SQL backup from productionsql_full_backup'
WITH
Replace ,
MOVE 'arsystem' TO 'd:ardataarsystem.mdf' ,
MOVE 'arsystem_log' TO 'D:ARLOGARsystem' ,
NORECOVERY
GO
2.RESTORE DATABASE ARSYSTEM
FROM DISK = 'E:SQL backup from productionSQL daily diff back up'
WITH
Recovery
The status of the 2 steps is :
1 Executed as user: BPOTESTREMEDY
emedybackup. Processed 104480 pages for database 'ARSYSTEM', file 'ARSystem' on file 1. [SQLSTATE 01000] (Message 4035) Processed 1 pages for database 'ARSYSTEM', file 'ARSystem_log' on file 1. [SQLSTATE 01000] (Message 4035) RESTORE DATABASE successfully processed 104481 pages in 49.452 seconds (17.307 MB/sec). [SQLSTATE 01000] (Message 3014)
2. Cannot apply the backup on device 'E:SQL backup from productionSQL daily diff back up' to database 'ARSYSTEM'. [SQLSTATE 42000] (Error 3136) RESTORE DATABASE is terminating abnormally. [SQLSTATE 42000] (Error 3013). The step failed.
i have applied transactional log to the database and set the database to recovery mode.
Suddenly i feel i want to recover another transactional log backup which i forgot. how to take database again to norecovery mode to apply that perticular tranasactional log only.
I cannot restore a backup file of the transaction log without getting the following message:
ODBC SQL State: 42000
The preceding restore operation did not specify WITH NORECOVERY or WITH STANDBY. Restart the restore sequence, specifying WITH NORECOVERY or WITH STANDBY for all but the final step.
I have tried to do this in Enterprise manager and with the following script with the same results:
RESTORE Log TestDB
FROM DISK='D:MSSQL7BACKUPMMTrans'
WITH NORECOVERY
What am I missing? Thanks in advance for any help.
Can anyone help me with this issue? I restored a full backup with NORECOVERY because I need to restore the differentials as well but I have not been able to access the db. No matter what I seem to try i receive the following error:
System.Data.SqlClient.SqlError: This differential backup cannot be restored because the database has not been restored to the correct earlier state. (Microsoft.SqlServer.Smo)
Does anyone know what I need to do?
Thank you in advance.
Julio
I have seen this before. A 2000 restore fails, leaving the database thinking it is being restored but the restore job failed and errors when it is restarted. EM is clueless. I believe there is a proc to reset some flag. Can you share it with me???
Thanks!
I'm working to test out a recovery scenario involving a SQL 2008 R2 2 node cluster. I want to restore it to a standalone server. The nodes are VMware VMs using physical RDM for the shared storage. Using Veeam as the backup tool. Veeam doesn't work with physical RDM so I'm dumping the databases (all Simple) elsewhere to be picked up and replicated with Veeam. No problem there. For my DR I have a vanilla 2008 R2 server being replicated so that I can use it as a base to restore SQL. So far the testing has worked ok. What I'm trying to learn is the best way to restore the cluster to the standalone server and have it look the same to the affected app servers. Â
The cluster has several instances. In my testing, I've recreated the instances, but I don't think they show up as they do on the cluster. For example, if the Windows server name is SQL01, and I install an instance called SQL-APP, SELECT @@servername while connected to the instance still shows SQL01 but in production it shows SQL-APP. What do I need to do to get everything to match up? I suspect that, while I haven't seen any problems, there could be something I'm missing that would manifest itself later.Â
Also, in testing, am I better off to delete the cluster server account from AD and join the domain with the DR server under the same name? (this is an isolated bubble so no impact on production).For the purpose of this scenario, assume all other required servers (DC, DNS, application, etc.) are present in the test environment as they would be in production and nothing requires resources outside the bubble. The only item affected is the SQL cluster.
Last week I backed up my SQL Server by using BE 2012. I named the file "SQL Server BAK" which contained copies of my SQL Server databases. A few days ago I lost some part of my data due to accidental deletion. I backed it up, so I tried to restore the database from the .bkf file. The problem comes here, when I try to to restore my .bkf file, it becomes inaccessible.what causes this?
View 7 Replies View Related11/19
Trying to keep out sysadmins & sa during/between database RESTORE
Configuration:
WINNT Server Enterprise 4.0 w/SP5
SQL Server 7 Enterprise & SP1
2 SQL Servers:
Production Server
Standby server
I Backup (full backup) databases to disk on primary server (logical backup devices are physicaly located on a Standby server (dedicated gigabit NIC in each server for this process). Transaction logs are applied to the Standby server throughout the day.
Problem:
How to keep out "sa" and sysadmins from a database while I'm restoring (or between restores) to a standby server?
The database being restored cannot be in use during a restore.
If a DBA forgets that this process is happening, the statement fails (RESTORE)for the database they happen to be in at the time of the restore.
Example restore statement:
Standby Server -
RESTORE DATABASE databasename FROM database_dd WITH DBO_ONLY, REPLACE, STANDBY = 'g:Mssql7FromPrimaryDatabaseName_undo.ldf'
I could restrict Domain sysadmin access and change sa password. I could also put the database in "Single user" mode, however this could become problem if my process disconnects and then someone else connects - then my process is locked out. What I'm really looking for is to lock out all activity for a database that is in "standby mode" except for RESTORE processes.
Any ideas??
Wade
wadej@vailresorts.com
Running SQL version 7 on "Terminal" Server I have a database marked in Load Receovery and we are unable to get to it. We tried MS SQL document on how to but we are still unable to recover it!
View 4 Replies View Relatedhai!
i have a database which crashed recently(26th sep 2007).my last backup is on 14 sep 2007.i have restored database after two days.Now i have a database (old) with data upto 14sep 2007 and from 26sep to till date.(data from 14sep to 26sep missing).I restored database on 28th with a new database name which has data upto 26th sep 2007.how to attach these two databases to a single database to have data from beginning to tilldate.
please help in this regard.
Hi,
I made an UPDATE query without specifying any criteria so I had more than 1500 records have been changed and I cannot undo the UPDATE.
Is there any way I can recover the data UPDATE from the Transactions Log.
I did not back up the database lately so what is the appropriate solutions for this?
Any thoughts… :S
Hi,
Is there a way to Revover a Sql Server 2000 database in the absence of the backup file(the backup file got overwritten). Does Sql Server do any automatic Transaction logging?
Thanks for any input
Hai friends....
SQL Server 2005 Database, So I want to know about Database Backup and Pointing Recovery concepts..so can u please help me and any send me related documents...
---
Thanks,
Nageswar.V
New Horizons Cybersoft Ltd
+919848854114 : nageswar@nhclindia.com