Database Stuck On Restoring Mode
Jun 27, 2007Hi
The database is stuck on a restoring mode.
How can i get it back online or in a read only mode?
Sql 2005 Server
Stefan:confused:
ADVERTISEMENT
Database Stuck In Single User Mode
Apr 21, 2008I have a database that got set into single user mode. Unsure the reason or who might opened it. I am trying to reset it, but I am having problems. I am trying the following from http://www.kodyaz.com/articles/alter-single-user-multi-user-mode.aspx to kill the connections. So I can then switch it back to multiple users.
DECLARE @DatabaseName nvarchar(50)DECLARE @SPId intSET @DatabaseName = N'Works'DECLARE my_cursor CURSOR FAST_FORWARD FOR SELECT SPId FROM MASTER..SysProcesses WHERE DBId = DB_ID(@DatabaseName) AND SPId <> @@SPIdOPEN my_cursor FETCH NEXT FROM my_cursor INTO @SPIdWHILE @@FETCH_STATUS = 0BEGINKILL @SPIdFETCH NEXT FROM my_cursor INTO @SPIdENDCLOSE my_cursor DEALLOCATE my_cursor
Which gives me the following error message when ran.
Msg 170, Level 15, State 1, Line 13
Line 13: Incorrect syntax near '@SPId'.
Stuck In Single-user Mode
Dec 2, 1998I have a database in development in SQL Server 6.5 that needs to be occasionally deleted and rebuilt from a script when table structures are changed. I found that when very complex queries were performed, the 2 MB default size of tempdb filled up and returned errors, so I went to the Enterprise Manager to expand tempdb, learned that I had to first expand a device to expand tempdb into, and foolishly chose to expand tempdb into the same device space used by my application, instead of into one of the system databases. Then when I tried to delete the device in preparation for its rebuild, the Enterprise Manager responded with an error message saying the device can't be deleted because it contains system tables. The answer (apparently) is to move tempdb into RAM, but when I tried to do that, I got an error message saying I couldn't unless I was in single-user mode. So I put it in single-user mode, and now I can't get to the server at all through the Enterprise Manager because an error message pops up saying "A connection could not be established to SERVER3 - [SQL Server]. Database 'tempdb' is already open and can only have one user at a time."
So now I'm really stuck. There are no other connections or users accessing the database. How can I get back in? No command-line switches seem to make any difference (-c, -f).
Stuck In Loading State While Restoring DB
Nov 8, 2007Hi there,
I'm new to this forum but was wondering if you could advise me on getting the DB back to an accessible state. I tried restoring the DB but unfortunately I don't have enough disk space. The error message appeared instantly informing me of the lack of disk space. Now it says its in (Loading state) and I cannot access the DB. Is there anyway I can manually change it back??
SQL Server Express Stuck Restoring...
Jan 25, 2007I seem to have a problem with one of my SQL Server Express databases. I started a restore task from a SQL Server 2005 BAK file (that included full-text data), which couldn't continue so I cancelled. Now, the database I attempted to restore to has the status "(Restoring...)".
This is a tiny database and a restore should (if it could) take only a few seconds.
I'm using SQL Server 2005 Management Studio (v9...).
Anyone know how to either cancel the restore or get the database into a good state again? I've tried stopping and starting (and restarting) the express instance, with no joy.
Log Shippee Stuck In State (Restoring...)
Oct 5, 2007I'm testing log shipping locally and had it running between two boxes. I tried to remove log shipping so on the primary I unchecked "Enable this as a primary database in a log shipping configuration" as per another thread. The primary stopped after a bit but the secondary never came out of the (Restoring...) state.
I'm obviously missing a step that needs to be run on the secondary because what I did wouldn't work if site A exploded but I can't figure out what the last step is.
Thanks,
Jeff
SQL 2012 :: Backup Stuck In Restore Mode?
Feb 28, 2014I have a DB, MDF is about 170GB, log 200GB. When I do a restore of it, the backup takes about 20 minutes to get to 100% but then it just stays there in Restoring Mode.
I have specified the WITH RECOVERY option.
What is happening that it doesn't commit the backup for some reason?
Restoring 2005 Backup With 8.0 Compatability Mode On 2000 - Help
Feb 26, 2007Hi,
I have a database that is in the SQL Server 2000 compatability mode on my SQL 2005 server. I am trying to restore a backup of this database on my SQL Server 2000 database on another server and keep getting strange messages. First trying Red-Gate and then plain SQL Server with no luck.
It seems as I remember that the 7.0 and 2000 compatibility issue between backups did not arise when the compatibility mode was set to 7.0.
Is this "planned" behavior or an "undocumented feature"??? Anyone else have success doing this?
Thanks,
John Campbell
Transact SQL :: Trigger Database In Suspect Mode And Get It Out To Normal Mode?
Jul 27, 2015how to put sql server database in suspect mode intensely and  get it out from suspect mode to normal mode.
  i am using SQL server 2008 R2
Restoring Database Leaves Me With (Restoring...) Message
Jan 9, 2007I did a full backup of a db from one server(Express2005) and trying to restore it to a different instance of SQL2005 on the same development machine. (Also had some fulltext columns if that means anything)
Many failures but finally got it to report all was successful except the icon in Object Explorer shows (Restoring...) with no indication of any real activity going on. It's a tiny database with hardly any data in it.
Just not sure what the heck is going on there. It also won't let me into the database until this the (Restoring...) goes away.
Any advice on how to get this thing finished out?
Restore Database Stuck On (Loading)
Dec 22, 2004I recently installed MSDE on a laptop. I then restored several databases from backup files without problem. However, one database is constantly stuck at the grey colour displaying the (Loading) message.
Why won't this database restore ? It is of course the most important database and I only have the one backup file.
This only appears to fail on his server. Do I need to uninstall MSDE and start over ?
Stuck On Renameing An Sql 2005 Database
Apr 15, 2008
How do you change the default instance of an already installed server from $SQLEXPRESS to $MSSQLSERVR
I am needing to change this to install the xp embedded packages.
Stuck With An Attempt To Attach An Auto-named Database...
Aug 13, 2007View 1 Replies View Related
Stuck With An Attempt To Attach An Auto-named Database...
Aug 13, 2007The last time I saved my Visual C# project, everything was functionning perfectly. Now, when I open my project, I have this warning on every one of my inherited forms. When I run the project, everything works fine. I've looked around for similar problems, but never found the solution that truly fits for me. Any suggestions?
An attempt to attach an auto-named database for file C:...DataBaseName.mdf failed. A database with the same name exists, or specified file cannot be opened, or it is located on UNC share.
at System.Data.SqlClient.SqlInternalConnection.OnError(SqlException exception, Boolean breakConnection)
at System.Data.SqlClient.TdsParser.ThrowExceptionAndWarning(TdsParserStateObject stateObj)
at System.Data.SqlClient.TdsParser.Run(RunBehavior runBehavior, SqlCommand cmdHandler, SqlDataReader dataStream, BulkCopySimpleResultSet bulkCopyHandler, TdsParserStateObject stateObj)
at System.Data.SqlClient.SqlInternalConnectionTds.CompleteLogin(Boolean enlistOK)
at System.Data.SqlClient.SqlInternalConnectionTds.AttemptOneLogin(ServerInfo serverInfo, String newPassword, Boolean ignoreSniOpenTimeout, Int64 timerExpire, SqlConnection owningObject)
at System.Data.SqlClient.SqlInternalConnectionTds.LoginNoFailover(String host, String newPassword, Boolean redirectedUserInstance, SqlConnection owningObject, SqlConnectionString connectionOptions, Int64 timerStart)
at System.Data.SqlClient.SqlInternalConnectionTds.OpenLoginEnlist(SqlConnection owningObject, SqlConnectionString connectionOptions, String newPassword, Boolean redirectedUserInstance)
at System.Data.SqlClient.SqlInternalConnectionTds..ctor(DbConnectionPoolIdentity identity, SqlConnectionString connectionOptions, Object providerInfo, String newPassword, SqlConnection owningObject, Boolean redirectedUserInstance)
at System.Data.SqlClient.SqlConnectionFactory.CreateConnection(DbConnectionOptions options, Object poolGroupProviderInfo, DbConnectionPool pool, DbConnection owningConnection)
at System.Data.ProviderBase.DbConnectionFactory.CreatePooledConnection(DbConnection owningConnection, DbConnectionPool pool, DbConnectionOptions options)
at System.Data.ProviderBase.DbConnectionPool.CreateObject(DbConnection owningObject)
at System.Data.ProviderBase.DbConnectionPool.UserCreateRequest(DbConnection owningObject)
at System.Data.ProviderBase.DbConnectionPool.GetConnection(DbConnection owningObject)
at System.Data.ProviderBase.DbConnectionFactory.GetConnection(DbConnection owningConnection)
at System.Data.ProviderBase.DbConnectionClosed.OpenConnection(DbConnection outerConnection, DbConnectionFactory connectionFactory)
at System.Data.SqlClient.SqlConnection.Open()
at System.Data.Common.DbDataAdapter.FillInternal(DataSet dataset, DataTable[] datatables, Int32 startRecord, Int32 maxRecords, String srcTable, IDbCommand command, CommandBehavior behavior)
at System.Data.Common.DbDataAdapter.Fill(DataTable[] dataTables, Int32 startRecord, Int32 maxRecords, IDbCommand command, CommandBehavior behavior)
at System.Data.Common.DbDataAdapter.Fill(DataTable dataTable)
at GestionnaireCadet.Données.dtsGlobalTableAdapters.TRACETableAdapter.Fill(TRACEDataTable dataTable) in C:Documents and SettingsIanMes documentsVisual Studio 2005ProjectsGestionnaireCadetGestionnaireCadetDonnéesdtsGlobal.Designer.cs:line 5927
at GestionnaireCadet.frmGestionnaire.Gestionnaire_Load(Object sender, EventArgs e) in C:Documents and SettingsIanMes documentsVisual Studio 2005ProjectsGestionnaireCadetGestionnaireCadetGestionnaire.cs:line 31
at System.Windows.Forms.Form.OnLoad(EventArgs e)
at System.Windows.Forms.Form.OnCreateControl()
at System.Windows.Forms.Control.CreateControl(Boolean fIgnoreVisible)
at System.Windows.Forms.Control.CreateControl()
at System.Windows.Forms.Control.SetVisibleCore(Boolean value)
at System.Windows.Forms.Form.SetVisibleCore(Boolean value)
at System.Windows.Forms.Control.set_Visible(Boolean value)
at System.Windows.Forms.Design.DesignerFrame.Initialize(Control view)
at System.Windows.Forms.Design.DocumentDesigner.Initialize(IComponent component)
at System.Windows.Forms.Design.FormDocumentDesigner.Initialize(IComponent component)
at System.ComponentModel.Design.DesignerHost.AddToContainerPostProcess(IComponent component, String name, IContainer containerToAddTo)
at System.ComponentModel.Design.DesignerHost.Add(IComponent component, String name)
at System.ComponentModel.Design.DesignerHost.System.ComponentModel.Design.IDesignerHost.CreateComponent(Type componentType, String name)
at System.ComponentModel.Design.Serialization.DesignerSerializationManager.CreateInstance(Type type, ICollection arguments, String name, Boolean addToContainer)
at System.ComponentModel.Design.Serialization.DesignerSerializationManager.System.ComponentModel.Design.Serialization.IDesignerSerializationManager.CreateInstance(Type type, ICollection arguments, String name, Boolean addToContainer)
at System.ComponentModel.Design.Serialization.TypeCodeDomSerializer.Deserialize(IDesignerSerializationManager manager, CodeTypeDeclaration declaration)
at System.ComponentModel.Design.Serialization.CodeDomDesignerLoader.PerformLoad(IDesignerSerializationManager manager)
at Microsoft.VisualStudio.Design.Serialization.CodeDom.VSCodeDomDesignerLoader.PerformLoad(IDesignerSerializationManager serializationManager)
at Microsoft.VisualStudio.Design.Serialization.CodeDom.VSCodeDomDesignerLoader.DeferredLoadHandler.Microsoft.VisualStudio.TextManager.Interop.IVsTextBufferDataEvents.OnLoadCompleted(Int32 fReload)
DB Engine :: 2012 Database Stuck In Recovery Pending Status?
Jan 12, 2013I have a SQL cluster which ran out of disk the other day. I threw plenty more disk at the SAN. However, 1 of the databases came back with Recovery Pending and has been over 24 hours. I have tried to backup the database with no success. I don't have a clean backup from the day it occured so would have a good amount of work missing.
Running a dbcc check returns the following:
Msg 945, Level 14, State 2, Line 1
Database 'sqldb' cannot be opened due to inaccessible files or insufficient memory or disk space. See the SQL Server errorlog for details.
I have not tried a dbcc check with REPAIR_ALLOW_DATA_LOSS as there seems to be a high risk of losing whatever was going on. how I can get the db back online?
SQL Server Admin 2014 :: AlwaysOn HA - Database Stuck In Initializing After Failover
Oct 23, 2015We had to failover our primary db server for maintenance to our secondary replica. The primary was rebooted during maintenance. We failed back after the maintenance and one of the databases is not synchronizing.
I checked sys.dm_hadr_database_replica_states, and it is showing that it is INITIALIZING.
It has been in this state for more than 45 mins now. The last_sent_time, last_received_time, last_hardened_time and last-redone_time are all stuck with a time stamp 45 mins ago.
They haven't changed. How do i resume this database and bring it back in sync?
I tried suspending and resuming the data movement, but hasn't worked.
Read Only Database Restore Bringing Database In Single User Mode?
May 9, 2012I'm taking a database(read-only) backup from one server and restoring it on other server. As soon as restore is done it is bringing database into single-user read-only mode.
why it is bringing the database into single user mode ?
SQL Server Admin 2014 :: Restoring A Database Even If No Database Or Backup Encryption
Sep 3, 2014I did tried the encryption on server "A" for database "AdventureWorks2012". Then I tried to restore to server "B". There was the certificate issue, and I thought "of course : it's encrypted ! Let's deactivate it". So here I go "ALTER DATABASE AdventureWorks2012 SET ENCYRPTION OFF".I look at sys.databases : not encrypted.I backup using no encryption, I verify using msdb.dbo.backupset : not encrypted.
I move my backup to my other server where encryption was never configured (so no certificate, nothing...), and I have the error :
Msg 33111, Level 16, State 3, Line 1
Cannot find server certificate with thumbprint '0xFA130E58C999C4919B8975999C83A75A403B11D8'.
Msg 3013, Level 16, State 1, Line 1
RESTORE DATABASE is terminating abnormally.
SQL Server 2014 :: Restoring Database Programmatically But Not Over Existing Live Database
Aug 6, 2015I want to restore a database (from an encrypted .bak file) - but *not* over the live original if you take my meaning. Encryption is the standard AES-256 that comes with Sql Server 2014 btw. I don't want the original touched/altered in any way. I would like to capture a success message if possible.I can extract the physical device name of the database in question using the following code:
SELECT physical_device_name, *
FROM msdb.dbo.backupmediafamily
WHERE media_set_id =(SELECT TOP 1 media_set_id
FROM msdb.dbo.backupset
WHERE database_name='MyDatabase'
AND type='D'
ORDER BY backup_start_date DESC)
I would like if the newly restored database was rename to something different than 'MyDatabase' (as shown above) and has different logs than the original. If possible, and capture a success message when restored.
Cannot Put Database In Offline Mode Because Lock Could Not Be Placed On Database
Sep 12, 2011One annoying problem has occurred....I want to put database in offline mode....but it is giving me some error...
"ALTER DATABASE failed because a lock could not be placed on database [database]. Try again later. ALTER DATABASE statement failed. (Microsoft SQL Server, Error: 5061)" ...
Restoring A Backup Of A Subscriber Database To A New Database
Dec 1, 2006I have a Subscriber database updated using transactional
replication and want to create a copy for development & testing. The Distribution database is running on the
same 2005 instance as the Subscriber and the Publication database on another
server running SQL Server 2005.
If I use a TSQL script to run the restore, the database is
restored to a usable state but I get the following messages:
Msg 15247, Level 16, State 1, Procedure
sp_MSrepl_check_job_access, Line 112
User does not have permission to perform this action.
The replication agent job [job name] was not removed because
it has a non-standard name; manually remove the job when it is no longer in use.
(I€™ve removed the job name from the message)
RESTORE DATABASE successfully processed 46219 pages in
935.413 seconds (0.404 MB/sec).
It looks like an attempt is being made to restore
replication information too. I note that
the RESTORE statement has a KEEP_REPLICATION options which implies (I would have
thought) that by default the replication information is not be restored.
Incidentally, before implementing replication, backing up
the live database and restoring the backup to a new database took < 7
minutes but running the same process with a Subscriber database backup takes
about 15 minutes.
I€™d be interested to know if anyone has any idea what I€™m
overlooking or doing wrong.
ThanksTim
Is It Possible To Switch From Pure Window's Authenticated Mode Ro Mixed Mode? (SQL 2005)
Jan 18, 2007Durning install I selected Window's Authentication only, but now it seems we may need to use a Mixed Mode with an SA account etc... is there anyway to switch SQL 2005 to use Mixed Mode after the fact?
View 1 Replies View RelatedSQL Server Admin 2014 :: SSRS SharePoint Integrated Mode Versus Native Mode
Jul 25, 2014We have reports in SharePoint integrated mode which are really slow when compared to native mode. I have been asked to research and give info on what exactly causes the delays.
Any articles which give me information as to what happens when a report is run from SharePoint server and where does it log.
Query Executes Faster In Grid Mode Than In Text Mode!!
Mar 9, 2000Hello,everyone!!
There is a query which when executed in the grid mode(ctrl+d) takes approx 0.02 seconds(about 21,000
rows) But when I execute in the text mode, it takes about 0.40 seconds!!
Why is this difference?
Also, when the records from this table are read from a VB application, they are equally slow (as in the text mode!)
Why is it so slow on the text mode & relatively faster in the grid mode?
Has anyone got any idea on ‘Firehose’ style cursor ?(which may speed up access of data in the VB application)
Rgds,
Adie
Database In Suspect Mode
May 12, 2000I have a database in suspect mode. There is no backup of this database.
I've followed the troubleshooting and it isn't working out.
There are 3 steps:
1. execute sp_resetstatus
2. use alter database to add data file or log file to the database
3. stop and restart SQL Server
4. free disk space and rerun recovery
I've tried to make it, but the step # 2 haven't worked.
Then I tried step 3, however the database is still in suspect mode.
What should I do?
Is there something I am missing?
Thanks,
Fábio
Database In Suspect Mode
Apr 19, 2004Hi
my database went into suspect mode. i tried to reset the status database by "sp_resetstatus abc". It is giving the message
"Prior to updating sysdatabases entry for database 'cr2db', mode = 0 and status = 260 (status suspect_bit = 256).
For row in sysdatabases for database 'cr2db', the status bit 256 was forced off and mode was forced to 0.
Warning: You must recover this database prior to access."
please let me if you have any solution to this problem.
thank you in advance
ricky
Restoring Database
Oct 4, 20011) We have got the database dump (.bak) file in one machine and we need to restore this to another machine where the SQL server (version 7) is running. But in the restore option there is no way to choose any mapped or shared drives in remote machine. Any pointer to resolve this problem?
2) Can you set up a database if you have the .mdf and .ldf files?
Restoring A Database
Jan 12, 2001I am running SQL 7 on two seperate NT4 servers, a production server and a standby server. Both servers are configured for Mixed Mode authentication. If I back up a database on the production server, do I also need to back up the master database and restore it. My reasoning behind this is that users' login details will be held in the sysxlogins tbl in the master, while their access rights will be held in the sysusers tbl in the database I am backing up and restoring. If I back up and restore a database without backing up and restoring the master db as well, will the connection between the system login and the database user be broken.
Any comments/suggestions would be appreciated.
Restoring Database
Sep 14, 1999Hi there...
can any one help in following situation.
Suppose in a network I have two sql server ABC and XYZ and XXX (NT server) on same sub net.
1) I take a backup from server ABC on XXX (NT).(ie.. backup on network)
2) Can I restore database in XYZ which was backed up by ABC? How???
3) Suppose My ABC machines fails and I have to again install SQL Server 7 on it, will I be able to restore database from XXX(NT)? how???
regards,
zak
Restoring SQL 6.5 Database
Jan 23, 2001Currently have large database in three devices, named Cabinet cab2 and cab3. Cab3 device has been expanded twice. We are upgrading the hardware and would like to get the database into one device named cabinet and clean the mess up our vendor initially created for us. Any Ideas/steps on how this could be accomplished??? TKS Jerry
View 2 Replies View RelatedRestoring Database On SQL 7.0
Mar 31, 1999Using SQL 7.0, has anyone backed up a database and restored on to a different database without the device files being moved around.
For example, With SQL 6.5 we used to backup PROD (source) database and restore to TRAIN (target) database. It worked just great regardless whether the databases are located on the same drive or not. We loved it and used it to refresh TRAIN from PROD on a weekly basis.(using sql Enterprise Mgr)
However, in SQL 7.0 when we attempt this procedure the database and log files of the TRAIN (target) are getting relocated to the drive location of PROD (source) database. Very strange.
Though thru object transfer i.e. import ,we can import data from PROD(source)
to TRAIN (target) database, but it is very slow and takes lot of time and performance degrades for source database (PROD)
Any input on above will be appreciated if backup / restore thru
enterprise mgr or TSQL procedure works in SQL 7.0 for restoring another database which is also on different drive i.e PROD (source) database on
drive C and TRIAN (target) database on drive E.
Thanks
Rajiv
Restoring A SQL Database.....
Jul 19, 2000While this may be in the wrong forum, I thought that I should try here first.
One of the developers that works for this company would like to restore a sample database to the SQL server after installing our software.
Is there a command line command that can be issued to restore/create a database with a file (.bak) of an SQL database (sample)? If this can't be done, can it be done with VBScript or something similar?
SQL is not my strong point, and neither is development. Any help would be appreciated.
TIA.
Joe
Restoring The Database
Mar 7, 2005Hi,
Two of my hard drives went down yesterday. and with it went the Sql server database.The data recovery guys recovered the back up database (.bak) file.I have since reinstalled SQL Server 2000 and now when i try and restore the .bak file it says the Microsoft tape back up file set is not valid when i try and open the .bak file.
Whats the right way to add my databse to the SQl Server2000 using my .bak file and if anyone has come across the error they could help.
Thanks
L