Database File Placement (many DB's)
Jul 21, 2004
Hello,
I have a question about how I can change the database placement on our HP MSA1000 SAN. Basically I'm concerned about the performance of one particular server with 40+ databases. I'm familiar with the standard recommendations such as separating data and log files onto different physical drives, etc. But how is this going to be possible when there are only 14 physical drives available in the MSA1000? I also have to be concerned about the other server that's attached. Any suggestions, besides getting additional storage... :)
Thanks.
View 1 Replies
ADVERTISEMENT
Feb 2, 2015
Database File Placement Layout? We are planning to implement a new SQL Server 2014 OLTP Database with a 1 TB Data file and 1 TB Log File. I am looking at the possible layout of the database files and trying to determine the best possible configuration. My knowledge/research tells me that items which need separate storage due to constant simultaneous access are:
Data files – should go on the fastest reading storage.
Log files – should go on the fastest writing storage.
TempDb – involves a lot of writing at the same time the data files are being read.
Indexes - (including full text indexes) - involves a lot of writing at the same time the data files are being read.
Also, are there any benefit to having multiple OLTP Database Log files? Because SQL Server writes to the log file sequentially, I do not see any advantages to having multiple database log files. In a SQL Server 2012 Class I took last summer, under “Determining File Placement and Number of Files”, it states “Use a single log file in most situations as log files are written sequentially.”
View 9 Replies
View Related
Nov 30, 2004
Can I choose where I want to store my database using MSDE
View 3 Replies
View Related
Jul 20, 2005
Hello All,I am looking at the performance of our production database. It is40gb, and growing reasonably fast. It is placed in one file group on aRAID-5 array. The array is made up of 20 (or so) 9gb disks. The data,the indexes and the transaction log are all on the "one logical disk".My question then, is, would it be better to move the transaction logonto a separate device (with Raid-1), and then separate out theindexes and the data and to place them onto separate devices (ie.split the raid disks into 2 new drives). Or would it be better toplace the table into a larger number of smaller filegroups effectivelysplit across the raid device and to (strategically) place differenttables into the new logical disks. Does this make sense?Or, do I just leave everything as it is?CheersMike
View 1 Replies
View Related
Aug 16, 2007
Can anyone point me to any Microsoft articals giving reccomendations for file placement for SQL server? We are trying to convince our Hardware guys that we need separate disks for data/log/tempdb files and need some ammo.
Thanks,
Jason
View 4 Replies
View Related
Sep 8, 2006
I need some help understanding the benefit of creating tempdb with one file per processor. I believe the benefit has something to do with the way SQL Server utilizes processor threads, but I'm a bit weak on the details.
Thanks, Dave
View 1 Replies
View Related
Feb 22, 2007
Using SQL2000
Is it recommended to put tempdb data and logs files on different drives?
View 1 Replies
View Related
Feb 22, 2007
Using SQL2000
Is it recommended to put the tempdb data and log files on different drives?
View 3 Replies
View Related
Jan 25, 2008
I have a server with 2 instances of SQL installed. There are 6 physical disks in the server which have been made into 3 mirrors.
The first mirror has the OS on it. Currently, the 2nd disk has all the database and transaction log files from both instances of SQL.
I plan to make use of the 3rd disk. My question is: is it better to move the database and transaction log files from the second instance to the new disk so that all the files for the first instance are on disk 2 and all the files for the 2nd instance are on disk 3 OR is it better to keep all the database files from both instances on disk 2 and move all the log files for both instances to disk 3?
I'm sure I have read somehwere that in this situation, the disks should be separated by instance rather than seperating by file type.
View 1 Replies
View Related
Aug 24, 2007
What is the best performance for this configuration:
Files:
Data
Log
Indexes
tempdb
Disk:
A - RAID 10
B - RAID 10 (or should this be RAID 1?)
Whats best?:
A - Data and Indexes
B - tempdb and Log
??? Thanks.
View 1 Replies
View Related
Sep 2, 2007
Greetings, I have just arrived back into the country (NZ) and back into ASP.NET.
I am having trouble with the following:An attempt to attach an auto-named database for file (file location).../Database.mdf failed. A database with the same name exists, or specified file cannot be opened, or it is located on UNC share.
It has only begun since i decided i wanted to use IIS, I realise VWD comes with its own localhost, but since it is only temporary, i wanted a permanent shortcut on my desktop to link to my intranet page.
Anyone have any ideas why i am getting the above error? have searched many places on the internet and not getting any closer.
Cheers ~ J
View 3 Replies
View Related
Mar 14, 2008
Hey guys
I have someone telling me that you can improve performance in SP's by placing all the DDL at the beginning of the procedure. ie. Do all your CREATE TABLE #tbl and DECLARE's before the rest of your code.
Any thoughts on this?
View 3 Replies
View Related
Dec 21, 2006
Is there any thought going into moving these two tables to a file group that we can control? Putting this in Primary with the rest of my system tables is quite problematic, and hinders my ability to manage space usage on my files. Traditionally, we didn't have to consider a primary file group that could grow to large proportions, but now with these two tables it can. If a large volume of messages gets sent through and the system can't keep up, then these tables and my primary file group will grow sometimes enormously.
View 8 Replies
View Related
Oct 9, 2007
yes,I have an error, like 'The database file may be corrupted. Run the repair utility to check the database file. [ Database name = SDMMC Storage Cardwinpos_2005WINPOS2005.sdf ]' .I develope a program for Pocket Pcs and this program's database sometimes corrupt.what can i do?please help me
View 4 Replies
View Related
Apr 30, 2007
We are creating a company-wide table of ZipCodes, States, GPS info, etc. This table can be used by our development and production servers (many of them.) We could place the table on a given server and use linked servers to grant access to that table to the other servers. But is there a better way to handle this globally-useful table?
Barkingdog
P.S. Clearly, we don't want to have multiple copies of this table scattered around on various servers. That introduces synchronization issues.
View 1 Replies
View Related
Jul 2, 2015
I've got a feeling that the answer is, "can't be done," but I'll go ahead and ask the august members of this forum, anyway. Is it possible to alter the placement of the Parameter fields when previewing a report?
At the moment, it seems that they form in a column of twos, reading from left to right. I see how the ORDER is affected, by changing the order of the parameters in the Report Data window, but can I change the number of columns?
View 2 Replies
View Related
Nov 4, 2015
I like writing concise and compact sql code without cursors if possible. My current dilemma has me stuck though.I have 3 tables, but one of them is optionally used and contains a key element of TimeOut to determine which Anesthesia CrnaID to use. It is the optionally used part that has me stumped.
Surgery table
CaseID
Patient
(Sample data: 101,SallyDoe 102,JohnDoe)
Anesthesia table
CaseID
CrnaID
(Sample data:
101,Melvin
102,Bart
102,Jack)
AnesthesiaTime table (this table is optionally used, only if the crna's take a break on long cases)
CaseID
CrnaID
TimeIn
TimeOut
(Sample data:
102,Jack,0800,1030
102,Bart,1030,1130
102,Jack,1130,1215)
Select Patient INNER JOIN Anesthesia produced too many case results. So, I figured out there is an AnesthesiaTime table that only gets used if the anesthesia guys take time-outs. That doesn't happen all the time. I could use TOP 1 on the Anesthesia table, but technically I need to read the AnesthesiaTime table and locate the last time and pull that crna, Jack. I'm not sure how to deal with an optional table. I believe the IF Exists will be pertinent, but not sure of how to build this query. I've tried subquery without success.
View 2 Replies
View Related
Apr 18, 2015
I can't seem to place the "option (recompile)" in any valid position so that the following procedure executes without a syntax error .
USE [PO]
GO
/****** Object: StoredProcedure [dbo].[npSSUserLoad] Script Date: 4/18/2015 3:57:38 PM ******/
SET ANSI_NULLS ON
GO
SET QUOTED_IDENTIFIER ON
[Code] ...
-- Generated code - DO NOT MODIFY
-- From Object Schema: 'C:XXXXXX.NetPOPOModel\_ObjectSchema
-- To regenerate this procedure use the 'Open With' option on file _ObjectSchema and select POCodeGen.exe
Declare @SqlCmd nvarchar(max)
Declare @ParamDefinitions nvarchar(1024)
Set @ParamDefinitions = N'@UserId int,NTUser varchar(30), @XmlResult XML OUTPUT'
Set @SqlCmd = N'Set @XmlResult =
(
Select
[UserId] [a],
[UserName] [b],
[code]....
View 7 Replies
View Related
May 24, 2015
I have a table called 'AssetPlacements' that shows the dates when certain objects (AssID) were placed at certain locations (LocID).
ID AssID LocID PlacementDate
1112015-05-01
2122015-05-06
3132015-05-09
4212015-05-03
5222015-05-07
6232015-05-11
I'd like to show the assets with a start date and end date for the placement of the asset.
The start date to be the placement date and the end date to be the next placement date of the asset.
Where there is no next placement date to then show the end date as the current date, so hopefully the table will show as the following.
ID AssID LocID StartDate EndDate
1112015-05-01 2015-05-06
2122015-05-06 2015-05-09
3132015-05-09 [GetDate()]
4212015-05-03 2015-05-07
5222015-05-07 2015-05-11
6232015-05-11 [GetDate()
I'm guessing some sort of recursion is required here to produce this.
View 7 Replies
View Related
Mar 24, 2006
I know allot of folks are having this problem and I tried lots of things but nothing works. I understand the problem is coping the SQL Express on another server is the problem - I just not sure what to do?
Version Information: Microsoft .NET Framework Version:2.0.50727.42; ASP.NET Version:2.0.50727.42
This is the last statement on the Stack Trace:
SqlException (0x80131904): An attempt to attach an auto-named database for file e:wwwdata81d0493fwwwApp_DataTestDatabase.mdf failed. A database with the same name exists, or specified file cannot be opened, or it is located on UNC share.]
System.Data.SqlClient.SqlInternalConnection.OnError(SqlException exception, Boolean breakConnection) +735091
I checked my server forum and they said I had to name a database:
Example: Database=(unique name);
But this didn't work either.
I just tried a simple web project that has only one database and one table in SQL Express with one sqldatasource and one datagrid. It works fine on my pc but when I use the copy function in Visio Studio 2005 Pro - I can't run the site on the remote server: www.myjewelrydirect.com
I tried coping the database manually. I tried disconnecting the database before I copy it. Below is my connection statement:
<connectionStrings>
<add name="TestDB" connectionString="Data Source=.SQLEXPRESS;AttachDbFilename=|DataDirectory|TestDatabase.mdf;Integrated Security=True;User Instance=True"
providerName="System.Data.SqlClient" />
</connectionStrings>
With all the comments in these forums - this must be a bug.
I have been working on this problem for over 2 weeks - HELP!
View 1 Replies
View Related
May 29, 2007
Hi all,
I have a database name MyDatabase (SQL Server Express Dabase File). Is there anyway that I could convert it to SQL Server Compact Edition File?
By the way does anyone here got any problem with programming in SQL Server Compact Edition? It troubles me.
Thanks,
bombie
View 6 Replies
View Related
Jul 20, 2007
I am developing a C# mobile 5.0SDK app that utilizes SQL2005 Compact Edition device files on Vista using as far as I know the latest SPs and versions.
Last night, I could open tables from the Server Explorer .sdf file, see the contents, edit the schema, etc. Now today, I assume all of a sudden,I am able to open schema but cannot open the table to see the contents. I get:
Microsoft SQL Server 2005 Compact Edition captioned error dialog box that says "Access to the database file is not allowed. [ File name = ],[,,]
Using Sql Server 2005 Management Studio Express, I can open the table, do queries etc. I have tried rebooting, deleting, opening old projects, deleting dataset, disconnecting mobile device, but I still get the same error. I have tried stopping the SQL Server(SQLEXPRESS) service on the server but get:
Cannot open MSSLQ$SQLEXPRESS service on computer 'p5w64'. Access is denied.
I have no idea what to do next to start moving forward again, other than try the XP environment which I will do next.
Has anyone experienced this problem?
Thank you.
View 9 Replies
View Related
Mar 29, 2006
How do I insert data from a flat file or .csv file into an existing SQL database???
Here what I've come up with thus far and I but it doesn't work. Can someone please help? Let me know if there is a better way to do this... Idealy I'd like to write straight to the sql database and skip the datset all together...
strSvr = "vkrerftg"
StrDb = "Test_DB"
'connection String
strCon = "Server=" & strSvr & ";database=" & StrDb & "; integrated security=SSPI;"
Dim dbconn As New SqlConnection(strCon)
Dim da As New SqlDataAdapter()
Dim insertComm As New SqlCommand("INSERT INTO [Test_DB_RMS].[dbo].[AIR_Ouput] ([Event], [Year], [Contract Loss],[Company Loss], " & _
"[IndInsured Loss Prop],[IndInsured Loss WC],[Event Info]) " & _
"VALUES (@Event, @Year, @ConLoss, @CompLoss, @IndLossProp, @IndLossWC, @eventsInfo)", dbconn)
insertComm.Parameters.Add("@Event", SqlDbType.Int, 4, "Event")
insertComm.Parameters.Add("@Year", SqlDbType.Float, 4, "Year")
insertComm.Parameters.Add("@ConLoss", SqlDbType.Float, 4, "Contract Loss")
insertComm.Parameters.Add("@CompLoss", SqlDbType.Float, 4, "Company Loss")
insertComm.Parameters.Add("@IndLossProp", SqlDbType.Float, 4, "IndInsured Loss Prop")
insertComm.Parameters.Add("@IndLossWC", SqlDbType.Float, 4, "IndInsured Loss WC")
insertComm.Parameters.Add("@eventsInfo", SqlDbType.NVarChar, 255, "Event Info")
da.InsertCommand = insertComm
Dim upComm As New SqlCommand("UPDATE [Test_DB_RMS].[dbo].[AIR_Ouput] " & _
"SET [Event] = @Event " & _
",[Year] = @Year " & _
",[Contract Loss] = @ConLoss " & _
",[Company Loss] = @CompLoss " & _
",[IndInsured Loss Prop] = @IndLossProp " & _
",[IndInsured Loss WC] = @IndLossWC " & _
",[Event Info] = @EventInfo", dbconn)
upComm.Parameters.Add("@Event", SqlDbType.Int, 4, "Event")
upComm.Parameters.Add("@Year", SqlDbType.Float, 4, "Year")
upComm.Parameters.Add("@ConLoss", SqlDbType.Float, 4, "Contract Loss")
upComm.Parameters.Add("@CompLoss", SqlDbType.Float, 4, "Company Loss")
upComm.Parameters.Add("@IndLossProp", SqlDbType.Float, 4, "IndInsured Loss Prop")
upComm.Parameters.Add("@IndLossWC", SqlDbType.Float, 4, "IndInsured Loss WC")
upComm.Parameters.Add("@EventsInfo", SqlDbType.NVarChar, 255, "Event Info")
da.UpdateCommand = upComm
da.Update(dsAIR, "TextDB")
************* ANY HELP WOULD BE GREATLY APPRECIATED************
THANKS
View 6 Replies
View Related
Sep 22, 2015
What is the recommended size and file growth for a database and log file? We will be storing approx 10000 records a day.Currently we have the following:
CREATE DATABASE Dummy
ON
PRIMARY
( NAME = Dummy_data,
FILENAME = 'D:....DATADummy.mdf',
SIZE = 250MB,
FILEGROWTH = 25MB )
LOG ON
( NAME = Dummy_log,
FILENAME = 'D:....DATADummy_log.ldf',
SIZE = 50MB,
FILEGROWTH = 5MB ) ;
GO
View 3 Replies
View Related
Mar 29, 2006
How do I insert data from a flat file or .csv file into an existing SQL database???
Here what I've come up with thus far and I but it doesn't work. Can someone please help? Let me know if there is a better wway to do this... Idealy I'd like to write straight to the sql database and skip the datset all together...
strSvr = "vkrerftg"
StrDb = "Test_DB"
'connection String
strCon = "Server=" & strSvr & ";database=" & StrDb & "; integrated security=SSPI;"
Dim dbconn As New SqlConnection(strCon)
Dim da As New SqlDataAdapter()
Dim insertComm As New SqlCommand("INSERT INTO [Test_DB_RMS].[dbo].[AIR_Ouput] ([Event], [Year], [Contract Loss],[Company Loss], " & _
"[IndInsured Loss Prop],[IndInsured Loss WC],[Event Info]) " & _
"VALUES (@Event, @Year, @ConLoss, @CompLoss, @IndLossProp, @IndLossWC, @eventsInfo)", dbconn)
insertComm.Parameters.Add("@Event", SqlDbType.Int, 4, "Event")
insertComm.Parameters.Add("@Year", SqlDbType.Float, 4, "Year")
insertComm.Parameters.Add("@ConLoss", SqlDbType.Float, 4, "Contract Loss")
insertComm.Parameters.Add("@CompLoss", SqlDbType.Float, 4, "Company Loss")
insertComm.Parameters.Add("@IndLossProp", SqlDbType.Float, 4, "IndInsured Loss Prop")
insertComm.Parameters.Add("@IndLossWC", SqlDbType.Float, 4, "IndInsured Loss WC")
insertComm.Parameters.Add("@eventsInfo", SqlDbType.NVarChar, 255, "Event Info")
da.InsertCommand = insertComm
Dim upComm As New SqlCommand("UPDATE [Test_DB_RMS].[dbo].[AIR_Ouput] " & _
"SET [Event] = @Event " & _
",[Year] = @Year " & _
",[Contract Loss] = @ConLoss " & _
",[Company Loss] = @CompLoss " & _
",[IndInsured Loss Prop] = @IndLossProp " & _
",[IndInsured Loss WC] = @IndLossWC " & _
",[Event Info] = @EventInfo", dbconn)
upComm.Parameters.Add("@Event", SqlDbType.Int, 4, "Event")
upComm.Parameters.Add("@Year", SqlDbType.Float, 4, "Year")
upComm.Parameters.Add("@ConLoss", SqlDbType.Float, 4, "Contract Loss")
upComm.Parameters.Add("@CompLoss", SqlDbType.Float, 4, "Company Loss")
upComm.Parameters.Add("@IndLossProp", SqlDbType.Float, 4, "IndInsured Loss Prop")
upComm.Parameters.Add("@IndLossWC", SqlDbType.Float, 4, "IndInsured Loss WC")
upComm.Parameters.Add("@EventsInfo", SqlDbType.NVarChar, 255, "Event Info")
da.UpdateCommand = upComm
da.Update(dsAIR, "TextDB")
************* ANY HELP WOULD BE GREATLY APPRECIATED************
THANKS
View 3 Replies
View Related
May 15, 2006
good morning,
I want to load data that i receive everydays from my customers in .xls file format (excel) or cvs file format, to the database that i have created on this purpose. but when trying to do that whith SSIS; i got an error message .... that i can't import redudant data in my database column.
Best regards.
View 1 Replies
View Related
Aug 31, 2007
The problem that I am having is that with Visual Web Developer I am creating a webpage and having it directly put online, so for example when I start a new ASP.NET page, I select the location to be HTTP, with the location http://MYWEBSERVER/Website and for the language and Visual BasicI notice a couple of things, first that there is no longer a a link under the Main toolbar "Website" selection called the ASP.NET configuration. So how can I configure what I want to have users be able to do? It seems that this choice is only available if I am building the ASP.NET page on my "localhost". So that is the first problem. So I am able to get the pages to work, atleast the things such as the textboxes to show up etc, (Even things as advanced as the "Login" box). How ever when I try to get someone to try to login I am taken to a page that has an server error. The error is:
"The SSE Provider did not find the database file specified in the connection string. At the configured trust level (below High trust level), the SSE provider can not automatically create the database file. "
The Stack Trace Errors are at the bottom. I think this is happening because the automatically generated databases are not getting built online as they are on my computer. On my computer I have MSSQL express. So either the databases are not getting built for some reason, (and I think that is the case as I don't see any in the folder). So I think that somehow I have to create a database on my server, and then somehow configure the ASP.NET file, perhaps in the Web.Config file to look for that new database. Is this the correct methodology? Is there some simpler way that I can just somehow upload things as they are and have them work correctly on my server? The error says that either the Server did not find the database or that the trust level was insufficient. I don't think that is it as I just looked again and I don't see any .MDF files. So how would I go about getting this to work right? Is there a way to do this with MySQL also? So that I don't have to use MSSQL? My server only allows 1 DataBase for that.
Thanks and I hope my question makes sense. It is basically how can I get it to be able to create and check users etc. online?
Brian
[ProviderException: The SSE Provider did not find the database file specified in the connection string. At the configured trust level (below High trust level), the SSE provider can not automatically create the database file.] System.Web.DataAccess.SqlConnectionHelper.EnsureSqlExpressDBFile(String connectionString) +2555237 System.Web.DataAccess.SqlConnectionHelper.GetConnection(String connectionString, Boolean revertImpersonation) +87 System.Web.Security.SqlMembershipProvider.GetPasswordWithFormat(String username, Boolean updateLastLoginActivityDate, Int32& status, String& password, Int32& passwordFormat, String& passwordSalt, Int32& failedPasswordAttemptCount, Int32& failedPasswordAnswerAttemptCount, Boolean& isApproved, DateTime& lastLoginDate, DateTime& lastActivityDate) +1121 System.Web.Security.SqlMembershipProvider.CheckPassword(String username, String password, Boolean updateLastLoginActivityDate, Boolean failIfNotApproved, String& salt, Int32& passwordFormat) +105 System.Web.Security.SqlMembershipProvider.CheckPassword(String username, String password, Boolean updateLastLoginActivityDate, Boolean failIfNotApproved) +42 System.Web.Security.SqlMembershipProvider.ValidateUser(String username, String password) +83 System.Web.UI.WebControls.Login.OnAuthenticate(AuthenticateEventArgs e) +160 System.Web.UI.WebControls.Login.AttemptLogin() +105 System.Web.UI.WebControls.Login.OnBubbleEvent(Object source, EventArgs e) +99 System.Web.UI.Control.RaiseBubbleEvent(Object source, EventArgs args) +35 System.Web.UI.WebControls.Button.OnCommand(CommandEventArgs e) +115 System.Web.UI.WebControls.Button.RaisePostBackEvent(String eventArgument) +163 System.Web.UI.WebControls.Button.System.Web.UI.IPostBackEventHandler.RaisePostBackEvent(String eventArgument) +7 System.Web.UI.Page.RaisePostBackEvent(IPostBackEventHandler sourceControl, String eventArgument) +11 System.Web.UI.Page.RaisePostBackEvent(NameValueCollection postData) +33 System.Web.UI.Page.ProcessRequestMain(Boolean includeStagesBeforeAsyncPoint, Boolean includeStagesAfterAsyncPoint) +5102
View 1 Replies
View Related
Apr 18, 2004
Hi there :)
I'm in the final stage of my asp.net project and one of the last things I need to do is add the following file information to my SQL server 2000 database when a file is uploaded:
First of all I have a resource table to which I need to add:
- filename
- file_path
- file_size
(the resource_id has a auto increment value)
so that should hopefully be straight forward when the file is uploaded. The next step is to reference the new resource_id in my module_resource table. My module resource table consists of:
- resource_id (foreign key)
- module_id (foreign key)
So, adding the module_id is easy enough as I can just get the value using Request.QueryString["module_id"]. The bit that I am unsure about is how to insert the new resource_id from the resource table into the module_resource table on file upload. How is this done? Using one table would solve the issue but I want one resource to be available to all modules - many to many relationship.
Any ideas?
Many thanks :)
View 1 Replies
View Related
Jun 8, 2006
I used SQl Server replication to create a new database (as I did using Visual Studio 2003) but when I go the Pocket PC and click on the file I get a native error 25011 with a description
The file is not a valid database file
An Internal error has occurred[,,,Databasename,,]
Interface defining error: IID_IDBInitialize
When I check on my Pocket PC what programs are available I've got Query Analyser 3.0 and SQLCE Query. It appears that the .sdf file is associated with SQLCE Query because when I use that to try and connect to the same database I get the same error.
If I use Query Analyser 3.0 (after having copied the .sdf file) to the temp directory I'm able to open the database.
There is a similar post to this one but it doesn't help me.
Is it that SQLCE Query is wrongly associated with the .sdf file?
If so how do I change that?
Or is there some other problem preventing me clicking on the .sdf db to open it?
I have recreated my project in Visual Studio 2005 and rebuilt all my components in 2005. There are some external ones that I use that I can't do this for.
The following is the build output that I get when I deploy to a clean PDA with a hard reset performed
------ Build started: Project: Printing, Configuration: Release Any CPU ------
No way to resolve conflict between "System.Data.SqlServerCe, Version=3.0.3600.0, Culture=neutral,
PublicKeyToken=3be235df1c8d2ad3, Retargetable=Yes" and "System.Data.SqlServerCe, Version=1.0.5000.0, Culture=neutral,
PublicKeyToken=969db8053d3322ac, Retargetable=Yes". Choosing "System.Data.SqlServerCe, Version=3.0.3600.0, Culture=neutral,
PublicKeyToken=3be235df1c8d2ad3, Retargetable=Yes" arbitrarily.
Printing -> C:DevmillarMobileSellercode2005MobileSellerMobileSellerPrintinginReleasePrinting.dll
------ Build started: Project: MobileSeller, Configuration: Release Any CPU ------
Consider app.config remapping of assembly "System.Data, Culture=neutral, PublicKeyToken=969db8053d3322ac, Retargetable=Yes"
from Version "1.0.5000.0" [] to Version "2.0.0.0" [C:Program FilesMicrosoft Visual Studio
8SmartDevicesSDKCompactFramework2.0v2.0WindowsCESystem.Data.dll] to solve conflict and get rid of warning.
Consider app.config remapping of assembly "System.Windows.Forms, Culture=neutral, PublicKeyToken=969db8053d3322ac,
Retargetable=Yes" from Version "1.0.5000.0" [] to Version "2.0.0.0" [C:Program FilesMicrosoft Visual Studio
8SmartDevicesSDKCompactFramework2.0v2.0WindowsCESystem.Windows.Forms.dll] to solve conflict and get rid of warning.
Consider app.config remapping of assembly "System, Culture=neutral, PublicKeyToken=969db8053d3322ac, Retargetable=Yes" from
Version "1.0.5000.0" [] to Version "2.0.0.0" [C:Program FilesMicrosoft Visual Studio
8SmartDevicesSDKCompactFramework2.0v2.0WindowsCESystem.dll] to solve conflict and get rid of warning.
C:WINDOWSMicrosoft.NETFrameworkv2.0.50727Microsoft.Common.targets : warning MSB3247: Found conflicts between different
versions of the same dependent assembly.
MobileSeller -> C:DevmillarMobileSellercode2005MobileSellerMobileSellerMobileSellerinReleaseMobileSeller.exe
C:DevmillarMobileSellercode2005MobileSellerMobileSellerMobileSellerfrmInvoice.vb(546,9): warning VSD101: Members not
supported by the device platform should not be called: System.Windows.Forms.Panel.set_Text is not a supported method in this
platform.
C:DevmillarMobileSellercode2005MobileSellerMobileSellerMobileSellerfrmInvoice.vb(634,9): warning VSD101: Members not
supported by the device platform should not be called: System.Windows.Forms.Panel.set_Text is not a supported method in this
platform.
C:DevmillarMobileSellercode2005MobileSellerMobileSellerMobileSellerfrmInvoice.vb(706,9): warning VSD101: Members not
supported by the device platform should not be called: System.Windows.Forms.Panel.set_Text is not a supported method in this
platform.
C:DevmillarMobileSellercode2005MobileSellerMobileSellerMobileSellerfrmInvoice.vb(846,9): warning VSD101: Members not
supported by the device platform should not be called: System.Windows.Forms.Panel.set_Text is not a supported method in this
platform.
Done building project "MobileSeller.vbproj".
------ Skipped Deploy: Project: BO, Configuration: Release Any CPU ------
Project not selected to build for this solution configuration
------ Skipped Deploy: Project: Printing, Configuration: Release Any CPU ------
Project not selected to build for this solution configuration
------ Deploy started: Project: MobileSeller, Configuration: Release Any CPU ------
Deploying 'C:DevmillarMobileSellercode2005MobileSellerMobileSellerBOinReleaseInTheHand.Data.Adoce.dll'
Deploying 'C:DevmillarMobileSellercode2005MobileSellerMobileSellerBOinReleaseInTheHand.Interop.dll'
Deploying 'C:DevmillarMobileSellercode2005MobileSellerMobileSellerPrintinginReleasePocketHTMLprint_NetCF.dll'
Deploying 'C:DevMILLAR CODE CABINETVS2003CFReferencesUSICF.dll'
Deploying 'C:DevVS2005CFReferences
eleaseSignature.dll'
Deploying 'C:DevVS2005CFReferences
eleaseRealUpDown.dll'
Deploying 'C:DevmillarMobileSellercode2005MobileSellerMobileSellerPrintinginReleasePrinting.dll'
Deploying 'C:DevVS2005CFReferences
eleasePhoneAPI.dll'
Deploying 'C:DevVS2005CFReferences
eleaseMVnetApplication.dll'
Deploying 'C:DevVS2005CFReferences
eleaseMobileHList.dll'
Deploying 'C:DevVS2005CFReferences
eleaseMobileGrid.dll'
Deploying 'C:DevVS2005CFReferences
eleaseImageButtons.dll'
Deploying 'C:DevVS2005CFReferences
eleaseCreditCardValidator.dll'
Deploying 'C:DevmillarMobileSellercode2005MobileSellerMobileSellerBOinReleaseBO.dll'
Deploying 'C:DevmillarMobileSellercode2005MobileSellerMobileSellerMobileSellerinReleaseMobileSeller.exe'
========== Build: 3 succeeded or up-to-date, 0 failed, 0 skipped ==========
========== Deploy: 1 succeeded, 0 failed, 2 skipped ==========
View 5 Replies
View Related
May 14, 2008
hello,
I'm not really sure my question belongs to here...
I have a database in Access (from microsoft office, of course), and I want to transfer convert it to SQL Server.
Does anyone know how I can do it? It must be very simple, but I haven't found it yet....
Thanks a lot!
- Miri
View 7 Replies
View Related
Sep 23, 2007
Hi
I am in a trouble without doing any mistake. I restarted while in parallely my sql server was restarting i.e I opened a management studio.
When it booted up next time. I see that my database is gone. Though it is showed up in the server but has no node below it.
I then checked the mdf files and ldf files and found mdf file to be of 0 KB and ldf file is of 1.73 GB. My database was in full recovery mode but i did not take any database backup.
Here ais the entry from my SQL server log:
The operating system returned error 38(Reached the end of the file.) to SQL Server during a read at offset 0000000000000000 in file 'C:Program FilesMicrosoft SQL ServerMSSQL.1MSSQLDATAHello.mdf'. Additional messages in the SQL Server error log and system event log may provide more detail. This is a severe system-level error condition that threatens database integrity and must be corrected immediately. Complete a full database consistency check (DBCC CHECKDB). This error can be caused by many factors; for more information, see SQL Server Books Online.
I wonder if now there is a case to recover my database..Can I restore/recover the database from .ldf file as it was in full recovery model?Any help i shighly appreciated.
View 5 Replies
View Related
Mar 8, 2015
I had to to relocate the database log file and I issued an Alter database command but by mistake I put a space in the file name as below. The space is at the beginning file name. Now I am unable get the database loaded to SQL Server. The database has 2 replications configured, so deleting and re-attaching the database means the replication needs to be re-configured. Is there an alternative way to issue a command to update the database FILENAME ? Not sure if this can be edited in master database (sys files).
ALTER DATABASE [User_DB]
MODIFY FILE (NAME = User_DB_log, FILENAME = 'I:SQLLogs User_DB_log.ldf')
GO
View 1 Replies
View Related
Nov 5, 2007
Hi all,
I downloaded and ran AdventureWorks.msi into my SQL Server Management Studio Express (SSMSE) one year ago.But I did not know how to attach it to my SSMSE then. Last week, I deleted it from the "Add or Remove" of Control Panel and I downloaded the new AdventureWork.msi and installed it my SSMSE. Today, I tried to use the Database Explorer of VB 2005 Express for the first Stored Procedure programming. I clicked on AdventureWorks.mdf and I got the following error: One or more files do not match the primary of the database. If you are attempting to attach a database, retry the operation with the correct files. If this is an existing database, the file may be corrupt and should be restored from a backup. Cannot open user default database. Login failed. Login failed for user 'CENADe1enxshc'. Log file 'C:Program FilesMicrosoft SQL ServerMSSQL.1MSSQLDataAdventureWorks_Data_log.ldf' does not match the primary file. It may be from a different database of the log may have been rebuilt previously. Please help and advise me how to correct this problem.
Thanks,
Scott Chang
View 9 Replies
View Related
