Dear friends
I need to report the amount of free space in each datafile of a database.
I have tried sys.dm_db_file_space_usage , but the documentation says that it only works for the TempDB.
Please help.
Regards
Parviz
I have a tempdb split into 4 files (5 if you include the log).
Autogrowth is disabled on the mdf/ndf files so that they can be used round robin (1 file per logical CPU).
Is there a way to be alerted when there is x% of free space left?
I know hwo to check the free space via t-sql but want to be able to be alerted. I could run a sql job that reports the free space and send a database mail message if under x% but wondered if there was a built in (or better) method?
I also have SQL Sentry.
SQL 2012 Standard
Hi,
I have to rebuild a clustered index.I want to know how to find out the free space in a database ?
I know that DBCC SQLPERF ( LOGSPACE )
will give free space in a log space.
Thanks,
copernicus.
I inherited a SQL server (2005) that sits on a Windows 2003 box (upgrading to 2008 R2 and Win2008, ASAP) and on our SQL Data Drive (260GB - 22GB free) we have 16 databases (that are associated with our primary application). One database in particular is causing me quite a bit of pain - on Tuesdays. This table will consume all available free space (save 700kb) and place it within it's 'reserved' space. It's not being used and I can reclaim it by shrinking. I have done this for 3 consecutive weeks now and I have always thought that shrinking is not really a best practice.
Based on a job I scheduled to spit out various database stats I discovered the following:
Somewhere after 11pm on Monday (and on or before 11:30pm) the reserved space goes from 9GB down to 23 then 37MB on this particular database.
After 1:30am on Tuesday (and on or before 2:00am) the database consumes nearly all available disk space and thus expands its reserved space to 28GB
I believe it has something to do with the Indexes being rebuilt - per the Maintenance Plan the Index Rebuild is supposed to occur every Monday @ 11pm. On 6/18 it ran from 11pm - 11:44pm with no problems. Starting on 6/26 (and subsequently 7/2 and 7/9) they have started at 11 and ended anywhere between 2 - to 3 hours later. And with the following error:
Failed-1073548784) Executing the query "ALTER INDEX [PK_activityLog] ON [dbo].[activityLog] REBUILD WITH ( PAD_INDEX = OFF, STATISTICS_NORECOMPUTE = OFF, ALLOW_ROW_LOCKS = ON, ALLOW_PAGE_LOCKS = ON, SORT_IN_TEMPDB = OFF, ONLINE = OFF ) " failed with the following error: "Could not allocate a new page for database 'FA_PROD_SDDS' because of insufficient disk space in filegroup 'PRIMARY'.
Create the necessary space by dropping objects in the filegroup, adding additional files to the filegroup, or setting autogrowth on for existing files in the filegroup. The statement has been terminated.". Possible failure reasons: Problems with the query, "ResultSet" property not set correctly, parameters not set correctly, or connection not established correctly.
The database 'FA_PROD_SDSS' is the one that I am having issues with.
Hi all
Iam working in Prodcution ENV,Please help how make space
The log file for database 'Home_alone' is full. Back up the transaction log for the database to free up some log space.
hello everyone,
I have a question about the under what circumstances will a large database with mostly free space not shrink?
thanks
Having just archived quite a bit of data from the main Production DB, I now have around 15% free, reclaimable space sat in the data file.
I'm reluctant to run DBCC SHRINKFILE as that apparently causes a lot of Index fragmentation which will cause issues for performance - how else can the space be allocated back to the OS?
wmic logicaldisk where "DeviceID='C:'" get FreeSpace /format:value
FreeSpace=231379468288
I am new to mssql server. There is a table on one of my databases that occupies a lot of space. And the space usage is as follows: (all values in KB)
reserved: 42329064
data: 16272288
index: 26050032
unused: 6744
This table takes up almost 80% of my database size, and the information is this table just captures the time spent by a user on the website(not very critical data)
I would like to know how to delete the entire index (which is what is occupying most space) to free up disk space. the index is a clustered index.
What is the percentage of FREE disk space that is needed for a backup? I have backups that are failing with no disk space errors. But there is enough disk. Does SQL Server need a percentage of free space all the time?
Thanks
geri
In my environment, there is maintenance plan configured on one of the server and while running DBCC checkdb on a database of size around 200GB, log file usage of tempdb is increasing and causing the maintenance job to fail.
What can I do to make the maintenance job run successfully, size of the tempdb database is only 50GB and recovery model is set to simple. It cannot be increased as the mount point on which it is residing is 50GB.
I need to be able to obtain the storage space used for database log files.
I can do this in version 6.5 but have been unable to accomplish this in version 7.0.
Does anyone have a suggestion?
xp_fixeddrives gives the free space on the server drives. Is there a xp which gives the actual size of the drive?
I need to calculate the %space used!
------------------------
I think, therefore I am - Rene Descartes
How do I find the available free space in the database, in the Database and the Log Segment
View 1 Replies View RelatedHi, I have linked to 50 servers and use dynamic query (exec @sqlString8000)...
to get info about 1000 databases.
Now I wand to use xp_cmdshell to check each server C: fress space, how could I return the last 2nd line value to a global ##temp table?
<<5 Dir(s) 2,169,880,576 bytes free>>
<<NULL>>
thanks
-D
Hi All,
I was wondering if anybody has the script to view the free disc space. Currently I am using xp_fixeddrives stored procedure, but it is undocumented and might not be supported in SQL Server 2005.
Thanks.
I would like to know how to determine how big log and data space is, and how much of this space is free. I would like to create a script to warn me when less than 20% free space is left in log as well as data.
Ruud
I've gone through the forum and have seen several others with a similar situation. I recently noticed my .mdf file grew to 200GB yet the data in the file is only about 40GB. I run sp_spaceused and get the following: database_size = 176GB, unallocated space = 134GB, reserved = 43GB, data = 17GB, index_size = 19GB, unused = 6GB.
I've tried "dbcc shrinkdatabase (mydb, truncateonly)", tried restarting server, tried running a maintenance plan including a reindex of the database, and I don't know what to do next.
Does anyone know how to free up this space?
Hi:
How can i get the Total and Free space of my filegroups, do you have some script for that?
Thnaks :eek:
Hi,
While I am importing few data to my SQL Server (2000) database, the free space is gettig increased in GBs. The database's File Growth is 1 MB (same for both Data Files and Transaction Files). The same database I restored on another PC and did the same process, it is working fine as there is no enormous growth in Free Space.
Any idea why this is
Regards,
Eldho
I was just reading a doc on SQL , that said that to free up the unused space from the DB , you should use the shrinkdatabase DBCC commnad. ....
I want to knw how to determine how much free unused space is there in a DB
Thanks,
How to check the free space in a DB file using TSQL?
------------------------
I think, therefore I am - Rene Descartes
My disk drive was full. So I deleted some records. Then I tried to shrink and it indicated available free space of around 5GB as indicated in the below image.
Once I ran the shrink for data file, though it completed successfully I didn't get the 5GB space as indicated. For log file shrink it shows available space of 200MB and when I run a log file shrink it does free up 200MB as indicated. So why is it not working with data file shrink? What am I doing wrong?
Hi,
I have some space available in the database, I tried dbcc shrink database and srrink file. I am not getting the disk space. But the amount of free space on the database sometime get increased.
Any help please
Thanks
John Jayaseelan
Hi friends ,
I have a database with around 2 GB space for the data and 5.8 GB for the
transaction log .
Now the problem is i do not have any more space on the system and data files requires more space than 2 G.B to execute some stored procedures .
Is it possible to decrease some space of the transaction log , say from 5.8 GB to 2 GB and allocate it to the data files .
My data and log files are on different drives . I did not find anything related to this topic in the BOL .
Can somebody help me with this problem ? Anthing related to this issue will be of great help to me since i have no expertise in this field .
Thanks and Regards
Christine S.
hi,
I'm trying to calculate how much unused space i have on one datafile. My main goal is to determine the max space i can save by doing a dbcc shrink.
Any help is greatly appreciated.
ThanKs in advance.
Al
what is the best way to make free space in tempdb?
View 5 Replies View RelatedHi,
In sql 7.0 , i would like to create a database with the size of 10Gb, in my server couple of databases already exist.
How do i know how much free space is there in File group.
we are having only one file group i.e PRIMARY.
Could anyone pls tell me about this.
Thank u.
--kavira
does anyone know if tempdb can be physically moved to a different partition on a disk drive on SQL Server 7.0? Since it can't be backed up I'm hesitant to use the sp_detach/sp_attach procedure because I don't want to crash it. If nothing else is available, I can attempt moving it this way at the end of the day and then just reboot to get tempdb back up again if the server fails, but I'd really appreciate a suggestion from someone who has more know-how than I do about system table operations. Thanks again
View 1 Replies View RelatedI've faced with this problem in my DB:
There are some tables that suffer inserts and deletes daily. These tables have 3 nonclustered indexes including the pk.
I perceived that the space used for these tables are growing day after day even ocurring daily deletes.
These inserts and deletes follow the keys of the pk in ascent order.
I ran DBCC SHOWCONTIG on the tables and got results like this:
- Avg. Bytes Free per Page.....................: 7996.3
When I transform the pk to clustered this problem doesn't happen.
You realized the consequence of this: the users complains because the DB is without space, but it's not true!
Anybody could help me to understand why the extents are not being deallocated?
Thank's for help!
Hi all,
I have to find free disc space in a drive from SQL Query and i am using MSSQL200. Does any body know the command for the same.
Also if i want to find hard disk space of a different machine on network, it is possible to get the data??
Also can i get the CPU/Memory usage data of our machine by some SQL/C++ commands??
Please let me know if u know any of the answer...
thanks
Alok
I saw something strange this morning that I can not work out in my head.
Customer contacted us saying that the login timeout for one of our web apps was timing out.
The login does a simple check of user name and password against a table and inserts the event into a tracking table. I traced the login routine and the query took zero seconds in the QA on the db server. Everything looked fine in the Task Manager and the Performance monitor except that the disk que spiked out when the login page was used. I pinged between the web and database server and that was fine. The disk had plenty of free space for the log and the mdf files. The db had about of 15mb of unallocated space. Nothing seemed to work until I allocated another 100 MB to the db on their test site. Suddenly no more time out. I tested the live site again and it was still happening (same db and web server). Bumped up the db size on the live site and boom no more problem.
The problem is "fixed" for the moment but I can not seem to reason why so I can actually fix the problem in the long run. I do not know why a simple little password routine would care about the difference between 15mb of unallocated space and 115 mb of unallocated space.
We've got an alert setup on our production database to warn us when the log file(s) exceeds 7 gigs. The Alert is triggering:
"The SQL Server performance counter 'Log File(s) Size (KB)' (instance 'Lexus') of object 'SQLServer:Databases' is now above the threshold of 7000000.00 (the current value is 7057656.00)."
However, according to the file system, the database properties screen files, and properties tabs, the log files combined are at under 5 gigs so this alert should not be going off.
The scary part is, when going to right-click on the database, choosing "tasks" and going to "Shrink > Files", the "Free Space" shows negative numbers for the first log file:
Log 1
Currently Allocated space: 118.69 MB
Available Free Space: -5323.24 MB (-4485%)
Log 2
Currently Allocated space: 4853.13 MB
Available Free Space: 411.20 MB (7%)
Has anybody ever run into this? Should I be worried that there is a bigger issue at hand?
Thanks!