Database Import Error...
Feb 28, 2007
Hey guys!!!
Please help me with this, when i try to import a database made in access to sql server 2005 i get the following error....
TITLE: SQL Server Import and Export Wizard
----------------------------------------
The SSIS Data Flow Task could not be created. Verify that DTSPipeline.dll is available and registered. The wizard cannot continue and it will terminate.
----------------------------------------
ADDITIONAL INFORMATION:
Value does not fall within the expected range. (Microsoft.SqlServer.DTSRuntimeWrap)
----------------------------------------
BUTTONS:
OK
----------------------------------------
It worked fine, but i had to uninstal SQL and when i installed again i came across this problem....
plz plzzzz... do resolve this issueee .. ive two months for the project and im stuck with this thing for the last 2 weeks at initial stage.
View 5 Replies
ADVERTISEMENT
Nov 29, 2006
I am trying to simplify a query given to me by one of my collegues written using the query designer of Access. Looking at the query there seem to be some syntax differences, so to see if this was the case I thought I would import the database to my SQL Server Developer edition.
I tried to start the wizard from within SQL Server Management Studio Express as shown in one of the articles on MSDN which did not work, but the manual method also suggested did work.
Trouble is that it gets most of the way through the import until it spews forth the following error messages:
- Prepare for Execute (Error)
Messages
Error 0xc0202009: {332B4EB1-AF51-4FFF-A3C9-3AEE594FCB11}: An OLE DB error has occurred. Error code: 0x80004005.
An OLE DB record is available. Source: "Microsoft JET Database Engine" Hresult: 0x80004005 Description: "Could not start session. Too many sessions already active.".
(SQL Server Import and Export Wizard)
Error 0xc020801c: Data Flow Task: The AcquireConnection method call to the connection manager "SourceConnectionOLEDB" failed with error code 0xC0202009.
(SQL Server Import and Export Wizard)
Error 0xc004701a: Data Flow Task: component "Source 33 - ATable" (2065) failed the pre-execute phase and returned error code 0xC020801C.
(SQL Server Import and Export Wizard).
There does not seem to be any method of specifying a number of sessions, so I don't see how to get round the problem.
Does anyone know how I can get the import to work?
View 2 Replies
View Related
Oct 1, 2007
We just upgraded from SQL Server 2000 to 2005. In the past, when I ran the import/export wizard to copy multiple tables from one database to another with SQL Server 2000, I had no problem. Now when I used the import/export wizard to copy multiple tables with SQL Server 2005, I kept getting an error. For example, when copied three tables, the first table might be copied fine and I got an error with the second table and the whole thing stop. Sometimes I could copy two tables. However, when I ran the import/export wizard to copy each table one at a time, it worked.
The error that I got was "Cannot insert duplicate key in object..." I selected the options to "Delete rows in existing destination tables", and "Enable identity insert". What am I doing wrong?
R. Jiwungkul
View 15 Replies
View Related
Aug 28, 2006
I am attempting to run an SSIS package that, among other things, imports a spreadsheet from excel into a database table. The package runs without any issues within Visual Studio. I have tried executing the package through both, the MSDB run package and through dtexec (trying to kick of the package through a stored procedure) and I get 2 different behaviors.
Using dtexec (the method I really need to use): The package will run successfully...up to the point when the spreadsheet is imported at which time it fails with Description: The AcquireConnection method call to the connection manager "Excel Connection Manager" failed with error code 0xC0202009. Here is the code:
exec xp_cmdshell 'dtexec /sq PopulateTRTLStationandtRTLUnitMapping /ser SERVERNAME
Running it through the MSDB Run Package UI...It will also make it up to the point where the Excel spreadsheet is imported but errors with: The Product level is insufficient for the component "Lookup Station and Account Type: (1894) ...and 1 line with that same error for every single task in that dataflow. Here is the code it runs.
/DTS "MSDBPopulateTRTLStationandtRTLUnitMapping" /SERVER "SERVERNAME" /MAXCONCURRENT " -1 " /CHECKPOINTING OFF /REPORTING V
The machine is running 32 bit OS Windows Server 2003 SP1 and Db SQL Server 2005 32 bit. I found one forum posting that suggested turning the Delay Validation property to True...but that did not fix the issue. I did create the package with my username with a ProtectionLevel of EncryptSensitiveWithUserKey. I don't think it is related to the account however because all of the tasks (serveral work tables are created) up to the Excel import will execute.
I really need to get this working as soon as possible so am open to any solutions someone can present.
View 2 Replies
View Related
Jan 12, 2006
Hi all,
when trying to ímport files to our database server from a client, I keep getting an error:
- Validating (Error)
Messages
Error 0xc00470fe: Data Flow Task: The product level is insufficient for component "Source_txt" (1).
(SQL Server Import and Export Wizard)
Error 0xc00470fe: Data Flow Task: The product level is insufficient for component "Data Conversion 1" (175).
(SQL Server Import and Export Wizard)
... doing the same import when logged on the server, hasn't been giving me any errors, how come. I can from my client without trouble import tables from other DB servers but when ever it is files it won't do it.
I tried as mentioned in other threads rerun setup to re-install SSIS, but as it was already installed it wouldn't re-install. My next move would be to make a clean install, but not sure it would help, as I think this is a buck.
best regards
Musa Rusid
View 1 Replies
View Related
Sep 9, 2015
I am new to SSIS. I have been struggling with this for the past one week. I have a weird task. I need to import several tables from one database to a different server with a new database name. We need to do this at the end of every year. The main problem here is that the number of tables varies every year. You may not have all the tables as last year or may have more tables. So I need to create a dynamic task that takes care of this every year without changing the package.
I have performed the following tasks **
1. Create a new dynamic database. ( I have used Execute SQL Task to do this) 2. Copy all the table structures ( I have used Execute SQL Task to do this)
3. Import Data. This is the main problem. I was trying to create a dynamic connection string with variables as suggested in several forums but I finally came to know that this cannot be done if the table structures are different as the metadata cannot be refreshed at runtime.
4. The final step to create a process to validate the data (the count from each table for both source and destination. I think this can be done with Sql task.
What is the best method to do this? My DBA does not like “Transfer SQL Objects Task” or “transfer Database Task”. I would like to create this as a dynamic process.
View 5 Replies
View Related
Apr 10, 2008
I am trying to use the Import Wizard to setup a daily job to import new records based on an ID field (PK). The source database is remote and a replica. I am inserting new records to update my table called the same thing. Both are SQL Native Client
Code Snippet
select *
from [CommWireless].[dbo].[iQclerk_SaleInvoicesAndProducts] as S1
join [IQ_REPLICA].[dbo].[iQclerk_SaleInvoicesAndProducts] as S2
on S1.SaleInvoiceID = S2.SaleInvoiceID
where S1.SaleInvoiceID > S2.SaleInvoiceID
When I parse the query, I keep getting an error message.
Deferred prepare could not be completed.
Statement(s) could not be prepared.
Invalid object name 'IQ_REPLICA.dbo.iQ_SaleInvoicesAndProducts'. (Microsoft SQL Native Client)
Anyone know an easy why to get this to work? Or should I add a create table to verify new records?
View 8 Replies
View Related
Jan 12, 2008
I have a backup of sqlserver 2000 data base . Now presently i am working on sqlserver 2005. Is there any facility to IMPORT entire 2000 database intosqlserver 2005.Please help me if there is any chance. Thanks in advance.
View 1 Replies
View Related
Oct 26, 2006
When i import the data from Foxpro .dbf file to sql, there is error:
Insert error, Column 47 ('mrlvbd',DBType_DBTimeStamp),status 6: Data Overflow.
Then i found out that it might be because of the date field of the data is blank. What can i do to solve this?
Thanks in advance
View 1 Replies
View Related
Sep 29, 2004
I BCP out a table and then import back. While BCP IN, i get the following error:
#@ Row 303, Column 5: Invalid character value for cast specification @#
#@ Row 296, Column 4: String data, right truncation @#
Help plz!
View 3 Replies
View Related
Aug 10, 2007
Hi, trying to import data from a MySQL DB to MSSQL 2005. Having some errors with collating it looks like. Maybe the syntax is incorrect...not sure. Never imported this way.
here is the import to create a table.
SET AUTOCOMMIT=0;
START TRANSACTION;
CREATE TABLE "tbl3215" (
"id" int(11) NOT NULL,
"IttNumber" text collate latin1_general_ci NOT NULL,
"IttTitle" text collate latin1_general_ci NOT NULL,
"IttDescription" text collate latin1_general_ci NOT NULL,
"IttJustification" text collate latin1_general_ci NOT NULL,
"TechSolution" text collate latin1_general_ci NOT NULL,
"DateReceived" text collate latin1_general_ci NOT NULL,
"DateRequired" text collate latin1_general_ci NOT NULL,
"Customer" text collate latin1_general_ci NOT NULL,
"OrgID" text collate latin1_general_ci NOT NULL,
"Funded" text collate latin1_general_ci NOT NULL,
"HBApID" text collate latin1_general_ci NOT NULL,
"Disapproved" text collate latin1_general_ci NOT NULL,
"DisReason" text collate latin1_general_ci NOT NULL,
"Completed" text collate latin1_general_ci NOT NULL,
"CompletionDate" text collate latin1_general_ci NOT NULL,
"Priority" text collate latin1_general_ci NOT NULL,
PRIMARY KEY ("id")
) AUTO_INCREMENT=4735 ;
here is the error returned.
Msg 102, Level 15, State 1, Line 1
Incorrect syntax near '='.
Msg 448, Level 16, State 2, Line 6
Invalid collation 'latin1_general_ci'.
Msg 448, Level 16, State 2, Line 7
Invalid collation 'latin1_general_ci'.
Msg 448, Level 16, State 2, Line 8
Invalid collation 'latin1_general_ci'.
Msg 448, Level 16, State 2, Line 9
Invalid collation 'latin1_general_ci'.
etc...
Now, i am not sure how to make this work, i am thinking sql2005 may not recognize latin1_general_ci? Is there a quide to which databases use which character sets and their incompatibilities?
Any help appreciated
Joe
View 2 Replies
View Related
Jan 23, 2008
I have created a DTS to import some data into a table. It is importing a tab delimited text file and I am getting an error when importing into a decimal field.
I have imported the data into a table with all the fields as varchar. The reason that I am getting this error is that the column that is giving me the errors is trying to populate the cells with a " " when there is no information!
Is there anything that I can do in order to treat that as a null?
View 2 Replies
View Related
Mar 13, 2008
I'm using the import wizard to create a new table from. The table gets created but no data gets copied.
In preview all is OK. I have MS Windows Samall Bussines Server 2003R2 Premium Edition with SQL 2005 WorkGroup Edition. In help/manual for this version is SSIS including but SSIS as service dosn't run.
Generate report:
Operation stopped...
- Initializing Data Flow Task (Success)
- Initializing Connections (Success)
- Setting SQL Command (Success)
- Setting Source Connection (Success)
- Setting Destination Connection (Success)
- Validating (Error)
Messages
* Error 0xc00470fe: Data Flow Task: The product level is insufficient for component "Source - .....1).
(SQL Server Import and Export Wizard)
- Prepare for Execute (Stopped)
- Pre-execute (Stopped)
- Executing (Success)
- Copying to [BayadaPortal].[dbo].[inSsrc] (Stopped)
- Post-execute (Stopped)
- Cleanup (Stopped)
View 3 Replies
View Related
Jun 3, 2007
I receive unhelpful errors from attempting to import a ms access table into sql server 2005 using the import wizard. Here is the report.
Operation stopped...
- Initializing Data Flow Task (Success)
- Initializing Connections (Success)
- Setting SQL Command (Success)
- Setting Source Connection (Success)
- Setting Destination Connection (Success)
- Validating (Error)
Messages
Error 0xc00470fe: Data Flow Task: The product level is insufficient for component "Data Conversion 1" (73).
(SQL Server Import and Export Wizard)
- Prepare for Execute (Stopped)
- Pre-execute (Stopped)
- Executing (Success)
- Copying to [Company].[dbo].[EMPLOYEE] (Stopped)
- Post-execute (Stopped)
- Cleanup (Stopped)
I received this type of error once before and got around it by removing all constraints from the table. I was able to import the table when the data types were nvarchar. I changed the data types to varchar and this occurred. How do I know what the message is specifically referring to or can I see more details of the import command. This is my first posting.
View 1 Replies
View Related
May 18, 2004
Im trying to import a tbl from access why am i getting this msg?
Error at destination for row #58
Insert error, colm 6 ('Check Date, dbtype_dbtimestamp), status 6: Data over flow.
Invalid character value for cast specification.
View 7 Replies
View Related
Feb 26, 2013
This is my source data in CSV format:
4,23,2AY5623,7235623
4,23,2GP1207,1451207
4,23,2GQ6689,4186689
Table:
CREATE TABLE [dbo].[Table1](
[idCodeLevel] [int] NOT NULL,
[idFirm] [int] NOT NULL,
[valCodeFrom] [varchar](15) NOT NULL,
[valCodeTo] [varchar](15) NOT NULL
) ON [PRIMARY]
[code]....
I googled and found out that I might have to use the format .fmt. But how can I convert a csv file to fmt. I have seen code to create fmt file from sql table.
View 5 Replies
View Related
Aug 22, 2007
Hi there
I am importing data from a database on one server to the same database (exactly the same table structure etc) on another server. I am specifying the data from certain tables on the source database which are completely empty on the destination database. The tables on the destination database each have a primary key column (Identity Specification = YES, Is Identity = YES, Identity Increment = 1, Identity Seed = 1, Not for Replication = YES).
The error i'm getting is as follows:
Error 0xc0202049: Data Flow Task: Failure inserting into the read-only column "GroupID".
(SQL Server Import and Export Wizard)
Error 0xc0202045: Data Flow Task: Column metadata validation failed.
(SQL Server Import and Export Wizard)
Error 0xc004706b: Data Flow Task: "component "Destination - YvGroup" (40)" failed validation and returned validation status "VS_ISBROKEN".
(SQL Server Import and Export Wizard)
Error 0xc004700c: Data Flow Task: One or more component failed validation.
(SQL Server Import and Export Wizard)
Error 0xc0024107: Data Flow Task: There were errors during task validation.
(SQL Server Import and Export Wizard)
I'm sure the most important error is the first one, "Data Flow Task: Failure inserting into the read-only column". Is this happening because i'm trying to import data into primary key columns that are usually populated by an auto incremented integer and is seeing it as read only?
How can I get round this?
Cheers
View 9 Replies
View Related
Jan 31, 2008
I'd like to set up a dts package to import .csv files and on testing one .csv with only one row I am getting this error:
Error Source: Microsoft Data Transformation Services Flat File Rowset Provider
Error Description: Too many columns found in the current row; non-whitespace characters were found after the last defined column's data.
data set from .csv:
-31,0,"CENTER","","","64 ROCK DR. #4100","BETH","MD.","20417","0470-5",30109,10598,"52492000 083","1018","406800","6896CE","7007","G00887",1,13983.24,2139.66,42741.9,150101.36,830317.41,1562843.99,30128.45,2,506,0,0,0,0,0,0,37.87,1,0,0,476.39,472.15,0,1191.12,0,90073.46,43038.97,0,309926.59,-14880.49,20060102,20090101,"A","","",""," ","C62454",0,0,0,0,0,0,0,0,8.39,0,0,0,0,"",0,"00000000",""
View 2 Replies
View Related
Sep 13, 2005
Using an access project front-end to an MSDE database, I'm trying toimport a spreadsheet using File->Get External Data->Import.After I select the spreadsheet name, I tell it I want to import into anexisting table and select the table name from the list. The name inthe list is dbo.Cost_Data. When I tell it to finish, it says the tabledoes not exist.If I do the same steps as the database owner, the table name does notcontain the "dbo." on the front of it and it is successful.Thanks for any help.Jerry
View 1 Replies
View Related
Jun 9, 2006
While attempting to import data from Excel using SSMS and the import/export wizard, I received the following error:
TITLE: SQL Server Import and Export Wizard
An error occurred which the SQL Server Integration Services Wizard was not prepared to handle.
ADDITIONAL INFORMATION:
Exception has been thrown by the target of an invocation. (mscorlib)
The connection type "EXCEL" specified for connection manager "{11CD789E-0DCD-48C8-81F9-1065D87B5ADF}" is not recognized as a valid connection manager type. This error is returned when an attempt is made to create a connection manager for an unknown connection type. Check the spelling in the connection type name.
({BB3EBEA7-7F0E-4346-A8A5-60E176732365})
Any clues as what causes this and how to resolve the problem. I am using Office XP.
View 2 Replies
View Related
Aug 24, 2006
Hello,
I am trying out a simple SSIS package to import data from an xls into a table. For this I am using an Excel Source and an OLEDB Destination.
One of the fields is called Notes. In the Excel Source, I have specified the Notes columns as Unicode string [DT_WSTR]. This maps to a SQL Table column which is nvarchar(max)
The error messages that I get are :
[Excel Source [1]] Error: An OLE DB error has occurred. Error code: 0x80040E21.
[Excel Source [1]] Error: There was an error with output column "Notes" (272) on output "Excel Source Output" (9). The column status returned was: "DBSTATUS_UNAVAILABLE".
[Excel Source [1]] Error: The "output column "Notes" (272)" failed because error code 0xC0209071 occurred, and the error row disposition on "output column "Notes" (272)" specifies failure on error. An error occurred on the specified object of the specified component.
Could anyone please help me with this.
regards,
Satya
View 3 Replies
View Related
Feb 21, 2008
Hi all,
I am trying to import a few tables into a database and when I run the import wizard, it gives an error at the Validating stage. Below are the errors. I don't know why this could be happening.
Validating (Error)
Messages
Error 0xc0202049: Data Flow Task: Failure inserting into the read-only column "RowID".
(SQL Server Import and Export Wizard)
Error 0xc0202045: Data Flow Task: Column metadata validation failed.
(SQL Server Import and Export Wizard)
Error 0xc004706b: Data Flow Task: "component "Destination - gAMD_Color_D_1_0" (343)" failed validation and returned validation status "VS_ISBROKEN".
(SQL Server Import and Export Wizard)
Error 0xc004700c: Data Flow Task: One or more component failed validation.
(SQL Server Import and Export Wizard)
Error 0xc0024107: Data Flow Task: There were errors during task validation.
(SQL Server Import and Export Wizard)
View 5 Replies
View Related
Mar 18, 2008
I get the following error during the execution of my package and can't understand the reason:
The INSERT statement conflicted with the FOREIGN KEY constraint
I use a lookup to import keys to my fact table as I do with the rest of the dimensions. Does anyone faced this error message before?
Thanks
View 5 Replies
View Related
Feb 2, 2007
if i have one table from database A, and i want to copy the table to database B, then how to do it in SQL server management studio express? is it i have to make sql query?
View 4 Replies
View Related
Sep 13, 2006
Hi,
I'm looking for the best way to export a database to another database. Essentially making a copy of it. I need to keep all of the database structure and data. I need a way to do this all programmatically, rather then through the wizard.
Thanks,
~Jamie
View 2 Replies
View Related
Sep 26, 2007
Hi,How to import csv file to sql server databse?Can anybody have the code? Regards Brijesh singh
View 2 Replies
View Related
Aug 11, 2006
Hi all,:confused:
I doing some Online projects....
for that some time i want to import database from online database server(located in Newyork), some time i want to transfer datatabse from one server to another server.
At this time i was used DTS Import/Export wizard, but i am not able to copy the relatioships of the tables(Primary key,foreign key,defaults,views,storedprocedures,triggers).
My query is How i downlod a database with exact structure and all data as it as in remote server.
thanks in advanse
View 3 Replies
View Related
Jun 7, 2015
how can i import the database that i have created in mysql and ms access to ms sql server
View 4 Replies
View Related
Dec 18, 2006
I need to import a database from MS SQL 2000. I created the database. Then I create the database scripts and run them in sql express but I get this error.
"The specified schema name "username" either does not exist or you do not have permission to use it."
I have also tried to use DTS on MS SQL 2000 to export the data into text file. I do not have the ability to copy the mdf files and attach them in SQL express or make a backup.
View 6 Replies
View Related
Feb 25, 2007
Hi, I am having problems running my import query. It runs to a point, then the next block of SQL it fails on, does anyone know why this is? I have included the code and the error message underneath. The import is ran using SQLwebadminThanks
SET ANSI_NULLS ON
GO
SET QUOTED_IDENTIFIER ON
GO
CREATE VIEW [HOME_RECORDS]
AS
SELECT dbo.TEAMS.TEAM_ID, ISNULL(dbo.HW.COUNT_HOME_WINS, 0) AS W, ISNULL(dbo.HD.COUNT_HOME_DRAWS, 0) AS D,
ISNULL(dbo.HL.COUNT_HOME_LOSES, 0) AS L, ISNULL(dbo.HW.HGF, 0) +
ISNULL(dbo.HD.HGF, 0) + ISNULL(dbo.HL.HGF, 0) AS F,
ISNULL(dbo.HW.HGA, 0) + ISNULL(dbo.HD.HGA, 0) + ISNULL(dbo.HL.HGA, 0) AS A
FROM dbo.TEAMS LEFT OUTER JOIN
dbo.HW ON dbo.TEAMS.TEAM_ID = dbo.HW.F_HOME_TEAM LEFT OUTER JOIN
dbo.HD ON dbo.TEAMS.TEAM_ID = dbo.HD.F_HOME_TEAM LEFT OUTER JOIN
dbo.HL ON dbo.TEAMS.TEAM_ID = dbo.HL.F_HOME_TEAM
The following error occured while executing the query:
Server: Msg 208, Level 16, State 1, Line 3
Invalid object name 'dbo.HW'.
View 2 Replies
View Related
Dec 6, 1999
hi all,
I'm trying to import export a database into another server
and i get an error:
"The license for the installation of the Microsoft SQL Server on your source and destination coonectins does not permit the use of DTS to transform data.
refer to your license agreement for more information..."
Can anyone tell me a workaround to this problem???
thank you
View 2 Replies
View Related
Mar 19, 2001
I am getting an error inserting a simple text file into a SQL2000 database table.
The text file is one column, comma delimited, and the DTS package to insert it into a table fails citing an error executing a 'COLLATE' statement.
Thanks for the help!
View 1 Replies
View Related
Aug 18, 2004
I get the following error when i use DTS Table Import task.
Createfile error on 'Servername.DBname.LOG'. Access is denied.
Please help
View 3 Replies
View Related
