1st question I have to ask is:
Is Emergency Mode the same as Bypass Recovery Mode?
2nd:
I have a SQL2005 Database that was suspect this morning. I put the database in Emergency Mode: alter database {dbname} set emergency.
I did a dbcc checkdb on the database and found some corrupt indexes. I attempted to do a dbreindex on the table and got the error:
Could not run BEGIN TRANSACTION in database '{dbname}' because the database is in bypass recovery mode.
How can I put the database in single_user mode and to a point where I can reindex the 1 table that is causing the problems. I would even be willing to drop the indexes and re-create.
Any suggestions or help would be appreciated!
Thanks in advance.
I am looking for some advice. On a 6.5 database a user seemed to be having slow response, someone decided to stop and start the services. The database in question went into recovery mode. 24 hours later a network tech decided to stop and start the services again because the database was in recovery still. 5 hours later they decided to run the statement to put the database in Bypass Emergency Mode - "update sysdatabase set status = -32768 where name = 'dbname'", then they decided to set the status to 0 which made the database available again.
What can I do to ensure they did not damage the database? Can I compare the backup prior to the issue with the current database?
I have a Database in suspect state and i have changed it to emergency mode and copied all the data and i am trying to delete it or renaming it so that i can recreate the db with the old name as my aplication will be looking for that database name. When i tried to drop the database it says its in use and cannot be dropped. And when I tried to rename it It gives me the follwoing message.
To change the NAME, the database must be in state in which a checkpoint can be executed.
I have successfully restored my old MSSQL7.0 database from a computer that crashed - but the database is several months old. I do, however, have the most recent log files (*.ldf) - the actual log file and NOT a backup log file. Is there any way i can update my restored databse with the most recent .ldf files?
I have two instances (Source and Destination) on the same server, i did a full backup of a database on the source server, i did a restore on the destination using the NORECOVERY mode, now the database on the destination as green arrow saying "restoring". From the source database i set up the mirroring, i'm using port 5022 on source and 5023 on destination, everything seems to connect fine but when i start mirroring i get the error message "Database mirroring cannot be enabled because the database is not full recovery error: 1465" but when i look at the property of the db on the source the recovery model shows full as so the destination?
The DB is in simple recovery mode. There are no open transactions (used dbcc opentran).
The server is running SQL Server 2014 and the DB is in compatibility mode SQL Server 2008 (100). It was upgraded to 2014 a month or two ago.
I have tried to re-size the log to 100mb, but any way I have tried (none gave errors), the log file remains the same size. I have tied to shrink the log file (through the UI and via DBCC commands) without success; no errors, but also no change in file size.
I have checked Log Reuse Waits, just in case, and as expected it showed “NOTHING” (select log_reuse_wait_desc, name from sys.databases)
I tried running a checkpoint, but that did not allow any resize or shrink to work.
I have tied creating large transactions to move the used point in the log file, in case this was the issue. I did this by creating tables that I drop after large inserts. While it shows me that the log space % used increased, the log file still does not allow the space to be reduced.
The following is what I was using for the transactions to get the log used.
BEGIN TRAN select a.* into testtable from sysobjects a, sysobjects b, sysobjects c ROLLBACK TRAN
Do I just need to continue running large transactions until the log space used gets high enough to get the “end point” in the log to really move? Is there an easier way to accomplish this (I have several DBs that have the almost identical problem), what I am using moves the Log Space Percent Used about a percent on each execution.
On SQL 2000, if I have a large transaction log for my database and I manage to fill it with a single large transaction but it is not set to autogrow, what happens?
We have 300+ databases on one sinlge server (SQL 2005). If I need to change recovery mode from full to simple for all of them, is there any way to do so? Please advice.
I have a db running under simple recovery mode. I am really pressed at disk space, and we have a long running script that keeps failing with "no space left on the device" error. I noticed the log file is very large. I plan to set the max log file size but at the same time I want to know that the database is in the log-truncate mode - perhaps from the database itself. Is there any metadata that could tell me this?
I have several databases that perform daily backups. Ever since I installed SP2, the backup jobs are failing. The logs state that it's because the database recovery mode cannot be SIMPLE, but need to be either FULL or Bulk-Logged.
Can anyone tell me if this is true, and that I do have to change my recovery mode?
Here's the error:
NEW COMPONENT OUTPUT Microsoft(R) Server Maintenance Utility (Unicode) Version 9.0.3042 Report was generated on "ICIS-SQL-SERVER". Maintenance Plan: DB Backup Duration: 00:08:05 Status: Warning: One or more tasks failed.. Details: Back Up Database (Transaction Log) (ICIS-SQL-SERVER) Backup Database on Target server connection Databases that have a compatibility level of 70 (SQL Server version 7.0) will be skipped. Databases: All user databases Type: Transaction Log Append existing Task start: 2007-03-10T05:08:09. Task end: 2007-03-10T05:08:09. Failed:(-1073548784) Executing the query "BACKUP LOG [hl7 db_SamirTesting] TO DISK = N'D:\mssql\backup\hl7 db_SamirTesting\hl7 db_SamirTesting_backup_200703100508.trn' WITH NOFORMAT, NOINIT, NAME = N'hl7 db_SamirTesting_backup_20070310050809', SKIP, REWIND, NOUNLOAD, STATS = 10 " failed with the following error: "The statement BACKUP LOG is not allowed while the recovery model is SIMPLE. Use BACKUP DATABASE or change the recovery model using ALTER DATABASE. BACKUP LOG is terminating abnormally.". Possible failure reasons: Problems with the query, "ResultSet" property not set correctly, parameters not set correctly, or connection not established correctly.
Command:BACKUP LOG [hl7 db_SamirTesting] TO DISK = N''D:mssqlackuphl7 db_SamirTestinghl7 db_SamirTesting_backup_200703100508.trn'' WITH NOFORMAT, NOINIT, NAME = N''hl7 db_SamirTesting_backup_20070310050809'', SKIP, REWIND, NOUNLOAD, STATS = 10 GO BACKUP LOG [dg_efilm_153] TO DISK = N''D:mssqlackupdg_efilm_153dg_efilm_153_backup_200703100508.trn'' WITH NOFORMAT, NOINIT, NAME = N''dg_efilm_153_backup_20070310050809'', SKIP, REWIND, NOUNLOAD, STATS = 10 GO BACKUP LOG [hl7 db] TO DISK = N''D:mssqlackuphl7 dbhl7 db_backup_200703100508.trn'' WITH NOFORMAT, NOINIT, NAME = N''hl7 db_backup_20070310050809'', SKIP, REWIND, NOUNLOAD, STATS = 10
Back Up Database (Transaction Log) (ICIS-SQL-SERVER) Backup Database on Target server connection Databases that have a compatibility level of 70 (SQL Server version 7.0) will be skipped. Databases: All user databases Type: Transaction Log Append existing Task start: 2007-03-10T05:08:09. Task end: 2007-03-10T05:08:09. Failed:(-1073548784) Executing the query "BACKUP LOG [dg_efilm_153] TO DISK = N'D:\mssql\backup\dg_efilm_153\dg_efilm_153_backup_200703100508.trn' WITH NOFORMAT, NOINIT, NAME = N'dg_efilm_153_backup_20070310050809', SKIP, REWIND, NOUNLOAD, STATS = 10 " failed with the following error: "The statement BACKUP LOG is not allowed while the recovery model is SIMPLE. Use BACKUP DATABASE or change the recovery model using ALTER DATABASE. BACKUP LOG is terminating abnormally.". Possible failure reasons: Problems with the query, "ResultSet" property not set correctly, parameters not set correctly, or connection not established correctly.
Command:BACKUP LOG [hl7 db_SamirTesting] TO DISK = N''D:mssqlackuphl7 db_SamirTestinghl7 db_SamirTesting_backup_200703100508.trn'' WITH NOFORMAT, NOINIT, NAME = N''hl7 db_SamirTesting_backup_20070310050809'', SKIP, REWIND, NOUNLOAD, STATS = 10 GO BACKUP LOG [dg_efilm_153] TO DISK = N''D:mssqlackupdg_efilm_153dg_efilm_153_backup_200703100508.trn'' WITH NOFORMAT, NOINIT, NAME = N''dg_efilm_153_backup_20070310050809'', SKIP, REWIND, NOUNLOAD, STATS = 10 GO BACKUP LOG [hl7 db] TO DISK = N''D:mssqlackuphl7 dbhl7 db_backup_200703100508.trn'' WITH NOFORMAT, NOINIT, NAME = N''hl7 db_backup_20070310050809'', SKIP, REWIND, NOUNLOAD, STATS = 10
Back Up Database (Transaction Log) (ICIS-SQL-SERVER) Backup Database on Target server connection Databases that have a compatibility level of 70 (SQL Server version 7.0) will be skipped. Databases: All user databases Type: Transaction Log Append existing Task start: 2007-03-10T05:08:09. Task end: 2007-03-10T05:08:09. Failed:(-1073548784) Executing the query "BACKUP LOG [hl7 db] TO DISK = N'D:\mssql\backup\hl7 db\hl7 db_backup_200703100508.trn' WITH NOFORMAT, NOINIT, NAME = N'hl7 db_backup_20070310050809', SKIP, REWIND, NOUNLOAD, STATS = 10 " failed with the following error: "The statement BACKUP LOG is not allowed while the recovery model is SIMPLE. Use BACKUP DATABASE or change the recovery model using ALTER DATABASE. BACKUP LOG is terminating abnormally.". Possible failure reasons: Problems with the query, "ResultSet" property not set correctly, parameters not set correctly, or connection not established correctly.
Command:BACKUP LOG [hl7 db_SamirTesting] TO DISK = N''D:mssqlackuphl7 db_SamirTestinghl7 db_SamirTesting_backup_200703100508.trn'' WITH NOFORMAT, NOINIT, NAME = N''hl7 db_SamirTesting_backup_20070310050809'', SKIP, REWIND, NOUNLOAD, STATS = 10 GO BACKUP LOG [dg_efilm_153] TO DISK = N''D:mssqlackupdg_efilm_153dg_efilm_153_backup_200703100508.trn'' WITH NOFORMAT, NOINIT, NAME = N''dg_efilm_153_backup_20070310050809'', SKIP, REWIND, NOUNLOAD, STATS = 10 GO BACKUP LOG [hl7 db] TO DISK = N''D:mssqlackuphl7 dbhl7 db_backup_200703100508.trn'' WITH NOFORMAT, NOINIT, NAME = N''hl7 db_backup_20070310050809'', SKIP, REWIND, NOUNLOAD, STATS = 10
Back Up Database (Transaction Log) (ICIS-SQL-SERVER) Backup Database on Target server connection Databases that have a compatibility level of 70 (SQL Server version 7.0) will be skipped. Databases: All user databases Type: Transaction Log Append existing Task start: 2007-03-10T05:08:08. Task end: 2007-03-10T05:08:09. Failed:(0) Database 'hl7 db_SamirTesting' will not be backed up because it does not have its recovery model set to Full or BulkLogged.
Back Up Database (Transaction Log) (ICIS-SQL-SERVER) Backup Database on Target server connection Databases that have a compatibility level of 70 (SQL Server version 7.0) will be skipped. Databases: All user databases Type: Transaction Log Append existing Task start: 2007-03-10T05:08:08. Task end: 2007-03-10T05:08:09. Failed:(0) Database 'dg_efilm_153' will not be backed up because it does not have its recovery model set to Full or BulkLogged.
Back Up Database (Transaction Log) (ICIS-SQL-SERVER) Backup Database on Target server connection Databases that have a compatibility level of 70 (SQL Server version 7.0) will be skipped. Databases: All user databases Type: Transaction Log Append existing Task start: 2007-03-10T05:08:08. Task end: 2007-03-10T05:08:09. Failed:(0) Database 'hl7 db' will not be backed up because it does not have its recovery model set to Full or BulkLogged.
Back Up Database (Full) (ICIS-SQL-SERVER) Backup Database on Target server connection Databases that have a compatibility level of 70 (SQL Server version 7.0) will be skipped. Databases: All databases Type: Full Append existing Task start: 2007-03-10T05:00:06. Task end: 2007-03-10T05:08:08. Success Command:EXECUTE master.dbo.xp_create_subdir N''D:mssqlackupmaster'' GO EXECUTE master.dbo.xp_create_subdir N''D:mssqlackupmodel'' GO EXECUTE master.dbo.xp_create_subdir N''D:mssqlackupmsdb'' GO EXECUTE master.dbo.xp_create_subdir N''D:mssqlackuphl7 db_SamirTesting'' GO EXECUTE master.dbo.xp_create_subdir N''D:mssqlackupdg_efilm_153'' GO EXECUTE master.dbo.xp_create_subdir N''D:mssqlackuphl7 db'' GO BACKUP DATABASE [master] TO DISK = N''D:mssqlackupmastermaster_backup_200703100500.bak'' WITH NOFORMAT, NOINIT, NAME = N''master_backup_20070310050006'', SKIP, REWIND, NOUNLOAD, STATS = 10 GO BACKUP DATABASE [model] TO DISK = N''D:mssqlackupmodelmodel_backup_200703100500.bak'' WITH NOFORMAT, NOINIT, NAME = N''model_backup_20070310050006'', SKIP, REWIND, NOUNLOAD, STATS = 10 GO BACKUP DATABASE [msdb] TO DISK = N''D:mssqlackupmsdbmsdb_backup_200703100500.bak'' WITH NOFORMAT, NOINIT, NAME = N''msdb_backup_20070310050006'', SKIP, REWIND, NOUNLOAD, STATS = 10 GO BACKUP DATABASE [hl7 db_SamirTesting] TO DISK = N''D:mssqlackuphl7 db_SamirTestinghl7 db_SamirTesting_backup_200703100500.bak'' WITH NOFORMAT, NOINIT, NAME = N''hl7 db_SamirTesting_backup_20070310050006'', SKIP, REWIND, NOUNLOAD, STATS = 10 GO BACKUP DATABASE [dg_efilm_153] TO DISK = N''D:mssqlackupdg_efilm_153dg_efilm_153_backup_200703100500.bak'' WITH NOFORMAT, NOINIT, NAME = N''dg_efilm_153_backup_20070310050006'', SKIP, REWIND, NOUNLOAD, STATS = 10 GO BACKUP DATABASE [hl7 db] TO DISK = N''D:mssqlackuphl7 dbhl7 db_backup_200703100500.bak'' WITH NOFORMAT, NOINIT, NAME = N''hl7 db_backup_20070310050006'', SKIP, REWIND, NOUNLOAD, STATS = 10
What is the impact of changing the recovery mode of a database from Full to simple? The client I am at has set their database to full recovery mode, set their log files to grow automatically. But I don't think they have ever done a backup of their transaction log (it has grown to over 19Gig, where the data portion of the database is only around 400M).
What is the impact of truncating the transaction log now? After truncating it, i would like to shrink the file to a managable number and change the recovery mode to simple (they don't need transaction log backups)
By default, distribution database is set to simple recovery mode. Why ? Should this be changed to full ? how often should transaction logs be taken ? What is the recommendation ?
What are the pros and cons of putting the system databases in full recovery mode I am asked by my manager to keep everything simple and uniform.We have all the user databases in Full recovery mode and he wants all the system databases as well to be full recovery mode. I would like to get the points where in i can argue that, there is no point in having the system databases in full recovery mode.Unfortunately i dont see anything related to this in BOL or internet.
When we do a full database backup manually, we are seeing the trn file reflect the current date/time, but we are not seeing the mdf reflect the new date/time. And we are not seeing the transaction log file decrease in size. the recovery mode is set to full, do we need to change to simple to see both the mdf being backup'ed?
hi, we have a SQL Server 2000 database which we set to 'SIMPLE' recovery mode at 6pm (due to nightly large data loads). We revert back to 'FULL' recovery mode at 6am.
My understanding was that in 'SIMPLE' recovery mode, the transaction log would not grow because it would automatically be truncated after a checkpoint. However this is not the case. I thought perhaps it could be due to a long running uncomitted transaction, but when I ran 'dbcc opentran', the oldest running transactions doesn't last for more than a couple minutes. I manually run a 'checkpoint' command as well in the hope of forcing the transaction log truncation. I repeat this a couple of times to no avail. When I run 'dbcc sqlperf(logspace)' , I can still see the transaction log growing.
It is not until I run 'backup log db with truncate_only' that the transaction log gets truncated. I do not understand, why the transaction log does not get automatically truncated in SIMPLE recovery mode?
My understanding is that the log file is not supposed to grow if the database is under simple recovery mode.I am in a situation where the log grows if do any inserts that involve millions of rows.How do i make sure that it does not grow?
I have a small, ~10GB SQL 2008 R2 database, that was setup with simple recovery. We do full backup each night at midnight when no one is using the database. Is there any problems with doing differential backups during the day when users may be writing to the database? Could I even do hourly differential backups while users are using the database? I'm conflicted about switching over to full recovery mode and using transaction logs to have the ability restore data between backups. If I can do a couple daily differential backups while users are using the database during the day, in addition to our nightly full backups, than I live with simple recovery mode.
Wondering whether I can have following included in a script file:
1. set the current single user db from Full to Simple recovery mode. 2. Checkpoint and shrink the transaction log file (release all unused space) 3. set the current single user db from Simple recovery to Full recover mode.
Hi, I don't have any backup file for database. But I do have *.mdf and *.ldf files on tape backup for all the databases on server. Our server has crashed and we are trying to rebuild it. Our DBA is not accessible right now. Can please anyone help how to put sql server back with all the databases?
Hi, I run 2 steps viz with NORECOVERY and with RECOVERY in sequence as SQP jobs. The 2nd step fails some times. When it starts failing, I run full backup of the production server again and the 2nd step starts succeding. Unless I run the full backup the 2nd step keeps on failing.
What are the conditions which generate for [SQLSTATE 42000] (Error 3013) and how to tackle this problem.?
The 2 steps are :- 1.RESTORE DATABASE ARSYSTEM FROM DISK = 'E:SQL backup from productionsql_full_backup' WITH Replace , MOVE 'arsystem' TO 'd:ardataarsystem.mdf' , MOVE 'arsystem_log' TO 'D:ARLOGARsystem' , NORECOVERY GO
2.RESTORE DATABASE ARSYSTEM FROM DISK = 'E:SQL backup from productionSQL daily diff back up' WITH Recovery
The status of the 2 steps is : 1 Executed as user: BPOTESTREMEDY emedybackup. Processed 104480 pages for database 'ARSYSTEM', file 'ARSystem' on file 1. [SQLSTATE 01000] (Message 4035) Processed 1 pages for database 'ARSYSTEM', file 'ARSystem_log' on file 1. [SQLSTATE 01000] (Message 4035) RESTORE DATABASE successfully processed 104481 pages in 49.452 seconds (17.307 MB/sec). [SQLSTATE 01000] (Message 3014)
2. Cannot apply the backup on device 'E:SQL backup from productionSQL daily diff back up' to database 'ARSYSTEM'. [SQLSTATE 42000] (Error 3136) RESTORE DATABASE is terminating abnormally. [SQLSTATE 42000] (Error 3013). The step failed.
I need to change the authentication mode from 'windows' to mixed, its a 4-node participating in always-on... Will this brake/impact alwayson in any way? I know I have to restart the sql instance.
Pages on a full recovery model database corrupted, need to ensure data loss is minimal for restore operation am thinking about restoring the latest full backup.
We have an issue with a 3 node SQL 2012 Always on availability group. Normal operation is node 1 (primary replica) with node 2 and node 3 as secondary replicas.After some patching, SQL wasn't running on node 1 hence the AG flipped over to node 2. This went unnoticed for some time and the transaction log for one of the AG databases became full on node 2 and node 3. (I think this is because it couldn't commit the transactions on node 1 so couldn't truncate it's t-log?) The DB is using synchronous replication btw.So I started SQL on node 1 and flipped the AG back to node 1 (with a data loss warning but I accepted this).Now the issue is that on node 2 and 3, the DB in question is stuck in a "Reverting / In Recovery" State. I've tried various commands such as ALTER DATABASE SET ONLINE, RESTORE DATABASE WITH RECOVERY etc but these fail stating unable to obtain a lock on the DB.
The weird thing is that on node 1 the state of the DB is "synchronised".how to resolve this issue on node 2 and 3? I've left them overnight (in case they were rolling back transactions, the DB is fairly large) but nothing seems to have happened. remove the DB from the AG in node 2 and 3 and add it back in again, ie recreate the replication?
I have relationships built for several tables and I want to bypass the FK restraints when deleting/truncating a table. The FK works fine when some one is trying to delete soemthing within the application, but on an administrative level, it is becoming VERY BOTHERSOME! Any help will be greatly welcomed!
__ Updated 8/24 @ 16:24
I tried a little experiment. I took the constraint off of my two main tables, "manufacturers" and "products". I tried to TRUNCATE the tables again and I got the same error message. My products seems to have other contraints with two other tables. I checked out the two tables and both of them are empty. What's the deal!?! Again, any help is welcomed!
__ Updated 8/24 @ 17:02 Ok so I tried to disable the constraints: ALTER products NOCHECK CONSTRAINT ALL, but it didn't work with truncating.
Well im trying to install some software on someone's cpu. I dont know his password, and he has forgotten. How do I get pass the login screen? and assign a new name and password. :confused:
