I am trying to load transaction log but I am getting an error message saying database is in use, my question is Is it possible to load transaction log when database is in use? if yes how?
Thanks
Bharvi
Is it possible to load both the SQL 7 database and transaction logbackups to SQL 2000 ? I assume it will perform the upgrade during theload.Thanks,James
View 4 Replies View RelatedHi,
does anybody know how to restore transaction log dumps (several dumps in one dump device) with TSQL statements ?
I tried "Load transaction devicename"
this fires an error message which complains that i have to use right sequence.
How do i tell the load command which sequence it shall use ?
You can use "load headeronly" command which gives you all entrys from the dumpdevice. How can i use this information ?
Thanks
Yorn
Hey guys,
I orignally wrote a post here regarding some info on setting up a cluster. Upon further analysis of the problem with our system, I noted that at particular times we have tremendous amounst of Update, Insert, Delete etc, transactions hitting out database.
I thought originally SQL Clustering could solve this problem, but the time and upkeep that will be required to maintain such a configuration might not be feasible and more importantly it may not even fix the problem.
Next week I plan on doing some more specific performance monitoring off the database during normal business activity, but my initial suspicion is that there is a tremendous amount of I/O processing due to the high transaction load which is slowing down the application.
I was wondering what you have done to alleviate such problems? One of the solutions I have come up with is to possibly create a Master/Slave SQL Server design where the Slave handles most of the database transactions and then at a low load during the day update the Master DB. How does this sound? Any other ideas would be greatly appreciated...
Thanx
Hi,
does anybody know how to automate the loading of incremental transaction dumps. The manual way is to use the "load tran DB with FILE = x" statement.
Since this has to be done in the right sequence and i need to automate this task to keep a second server up to date i like to know if there is a stored procedure
or any other tool which could do the task.
Thanks for your help
Best Regards
Yorn Ziesche
We are experiencing problems when using OLEDB Fast Load option with transaction. We have a sequence container containing a Data Flow Task with a OLEDB source selection from tab1 left join tab2 and inserting into tab2 on a OLEDB Destination Fast Load.
The setup/troubleshooting is:
We are using TransactionOption=Requiered on the sequence container holding the Data Flow Task
OLE DB destination with Fast Load, no table lock, no check constraints
Dosn't happen on small sized data - seems as if everything can be contained in one buffer the task succeeds
Only a problem when selection and insertion is on the same table - or a view based on the same table
I know that we can use the OLE DB destination without Fast Load but this will perform badly on big sized data so that is not an option.
The errormessage is as follow:
Code Block
Information: 0x402090DF at dft Upsert Sag, OLE DB Destination [8295]: The final commit for the data insertion has started.
Error: 0xC0202009 at dft Upsert Sag, OLE DB Destination [8295]: SSIS Error Code DTS_E_OLEDBERROR. An OLE DB error has occurred. Error code: 0x80004005.
An OLE DB record is available. Source: "Microsoft SQL Native Client" Hresult: 0x80004005 Description: "This operation conflicts with another pending operation on this transaction. The operation failed.".
Does anyone have any ideas how to solve this problem?
Hello Folks,
Appreciate if somebody take out a moment and help me here. I'm having a production database backing up every night at 10:00PM. I've one more development server sitting side by and want this development server to load the production backup copy every night. But the problem what I'm encoutering is, When there are users connected to my development server, It wont get load saying "Database is in Use".
Therefore is there a command, I kill all users at one short and have a task which will load the database? If so, Please let me know how to do this.
Thank you very much
Steve
Hello,
Does everyone have experience to load a big database? My SQL Server 2K is running on W2K. The database is 4GB, and the biggest table has 12 million records. Thanks a lot.
ytz
Hello,
I am an administrator of a SQL server 2000 machine residing on a windows 2000 box. I tried restoring a database on this server from a backup file that i copied from another server. Halfway through the restore, the user comes up to me saying they did not want the database restored again. I stopped the restore process and since then it has not gone back to its previous state. Secondly it is grayed out with a (loading) text next to the database icon.
how did this happen and how do you suggest i solve this.
regards
I want to schedule a job on a 7.0 server that will run a LOAD DATABASE command on a 6.5 server. Is there a way to do this?
View 1 Replies View RelatedHi,
Here I will describe my problem.
1. We are loading large amount of data from database on background thread which is starting on Application_start event in global.aspx.cs file.The data is later cached for subsquent request to improve the performance.
2. Now when we put the application on web farm garden, it is not able to load the application.
3. We are sending the request the servers through Router kind of application.
4 This application is working fine on single server enviornment.
Please help us.
Ajay Kumar Dwivedi
everything is ok.. the connection is on..the page can be loaded... no error....
BUT the data from the database cannot be retrieved... as in.. it just didnt load on screen...
i dont know whats wrong... i have follow all the steps show on a book.. can anyone pls help me?? thks
Sorry for the ultra noob question...I just installed SQL Server 2005 and I'm trying to open the AdventureWorks database. I don't have a server setup so I can't make a connection when the program starts up. I have all the files for the AdventureWorks DB, but I can't figure out how to open it. Do I need to have a connection? Is there a way to open the DB without it?Thanks very much!
View 2 Replies View RelatedHi All,
I want to load a text file into database without using Bulk Insert.
I readed the text file and kept in a datatable. I need to insert this data into database.
how can i bing data in datatable to dataset.
how can i update changes in dataset to database.
Please help me....
Thank you.
Hi,
When i tried to restore database from the Network m/c ...upto 60% of the restoration process went well,But after that i got message saying that
" Communication link failure " then database went in to LOAD/SUSPECT mode,
This happend in Active/Active Cluster environment and at the same point of time Fail over occured and resources moved to other node.
i tried by running SP_RESETSTATUS stored procedure to change the status of the Database ,But no use...
Then i deleted the Database and recreated and restored.. because it was a test server...BUT if it happens in Production what to do?????.....
Is there anyway to over come such situations...
Thanks in advance
Mar R
Hi,
My problem is I only can put the database table to another database.I use example to ********. For example. My database name is Career. The user has a database name called Online. The Online has already some tables in the database they created before. I just need load my database career tables to the Online database. My database career has seven tables. These tables has a reltionship for each other. I just need to load these table to the Online database, But don't build relation to the tables that already exist in the Online database.
Besides, I want to know how load the stored procedure from my database to another database.
Hello Friends
I had a really big Problem.
Sorry about my Englisch, came from Austria.
After a SQL Database Restore, who ends with no faults, i cannot connect to it.
In the Enterprise Manager it is marked as "in load" and in the Errorlogfile stand following.
"Bypassing Recovery für Database "WINLINE" because it is marked "in load"?
What does it mean! Please help!!
Thanks for all answers
Mike
I have a sql server database linked to my application. I have a table that I want one of the columns (Service Perfomed) to load in a list box. When I start the application nothing appears in the list box. What could I be doing wrong?
Here the code the visual studio created:
Private Sub MainForm_Load(ByVal sender As System.Object, ByVal e As System.EventArgs) _
Handles MyBase.Load
Me.ServiceTableAdapter.Fill(Me.MaintenanceRecordsDataSet.Service)
End Sub
I've tried combo box, text box and these seem to work fine but not the list box.
Hi,
Is there anyway to load all the raw data in one directory into the database? l've several files with same format but different filename in one folder which l do not know their filename before hand.
Is SSIS For Each Loop can help me to accomplish the file loading? If so, where can l find the example?
Thanks you.
Regards,
Yong Boon, Lim
Hi All
I'm getting this when executing the code below. Going from W2K/SQL2k SP4 to XP/SQL2k SP4 over a dial-up link.
If I take away the begin tran and commit it works, but of course, if one statement fails I want a rollback. I'm executing this from a Delphi app, but I get the same from Qry Analyser.
I've tried both with and without the Set XACT . . ., and also tried with Set Implicit_Transactions off.
set XACT_ABORT ON
Begin distributed Tran
update OPENDATASOURCE('SQLOLEDB','Data Source=10.10.10.171;User ID=*****;Password=****').TRANSFERSTN.TSADMIN.TRANSACTIONMAIN
set REPFLAG = 0 where REPFLAG = 1
update TSADMIN.TRANSACTIONMAIN
set REPFLAG = 0 where REPFLAG = 1 and DONE = 1
update OPENDATASOURCE('SQLOLEDB','Data Source=10.10.10.171;User ID=*****;Password=****').TRANSFERSTN.TSADMIN.WBENTRY
set REPFLAG = 0 where REPFLAG = 1
update TSADMIN.WBENTRY
set REPFLAG = 0 where REPFLAG = 1
update OPENDATASOURCE('SQLOLEDB','Data Source=10.10.10.171;User ID=*****;Password=****').TRANSFERSTN.TSADMIN.FIXED
set REPFLAG = 0 where REPFLAG = 1
update TSADMIN.FIXED
set REPFLAG = 0 where REPFLAG = 1
update OPENDATASOURCE('SQLOLEDB','Data Source=10.10.10.171;User ID=*****;Password=****').TRANSFERSTN.TSADMIN.ALTCHARGE
set REPFLAG = 0 where REPFLAG = 1
update TSADMIN.ALTCHARGE
set REPFLAG = 0 where REPFLAG = 1
update OPENDATASOURCE('SQLOLEDB','Data Source=10.10.10.171;User ID=*****;Password=****').TRANSFERSTN.TSADMIN.TSAUDIT
set REPFLAG = 0 where REPFLAG = 1
update TSADMIN.TSAUDIT
set REPFLAG = 0 where REPFLAG = 1
COMMIT TRAN
It's got me stumped, so any ideas gratefully received.Thx
I just have done the SSIS example in the tutorial document included when install SQL 2005 ENT. I have a problem that whenever I test to run, the service load all data from source with out noticing about the data (I mean it load all the data to the destination), I do it several time and it continue to load all without checking. That mean the data is dublicated when the schedule run???
I think there should be a paramete or something like that to help the engine just load the new data to the destination. Could you help please?
Thank
I have a design a SSIS Package for ETL Process. In my package i have to read the data from the tables and then insert into the another table of same structure.
for reading the data i have write the Dynamic TSQL based on some condition and based on that it is using 25 different function to populate the data into different 25 column. Tsql returning correct data and is working fine in Enterprise manager. But in my SSIS package it show me time out ERROR.
I have increase and decrease the time to catch the error but it is still there i have tried to set 0 for commandout Properties.
if i'm using the 0 for commandtime out then i'm getting the Distributed transaction completed. Either enlist this session in a new transaction or the NULL transaction.
and
Failed to open a fastload rowset for "[dbo].[P@@#$%$%%%]". Check that the object exists in the database.
Please help me it's very urgent.
I need to update a number of sql server tables, the data sources for these coming from a number of stored procedures. I want a generic way of getting the data and then passing this data to the tables.I am thinking of doing this for each table:Populating a datasetWriting this dataset to XMLUsing SQLXML Bulk Load to pass this XML to the database to updateI can create the xml data file by:
dataset.WriteXml("C:data.xml")The problem I have is that the example (http://support.microsoft.com/default.aspx/kb/316005/en-us) I looked at relies on the schema being defined:<?xml version="1.0" ?><Schema xmlns="urn:schemas-microsoft-com:xml-data" xmlns:dt="urn:schemas-microsoft-com:xml:datatypes" xmlns:sql="urn:schemas-microsoft-com:xml-sql" > <ElementType name="CustomerId" dt:type="int" /> <ElementType name="CompanyName" dt:type="string" /> <ElementType name="City" dt:type="string" /> <ElementType name="ROOT" sql:is-constant="1"> <element type="Customers" /> </ElementType> <ElementType name="Customers" sql:relation="Customer"> <element type="CustomerId" sql:field="CustomerId" /> <element type="CompanyName" sql:field="CompanyName" /> <element type="City" sql:field="City" /> </ElementType></Schema>Is there any way I can create the schema 'on the fly' similar to how I did for the data source file.As I could then pass these files to the database:objBL.Execute ("schema.xml","data.xml");
can anyone out there help me to solve this problem???
how to load image to and retrieve from database(sql server)??
thanks alot
cyndie
I need to load a customer database onto our SQL 2008 server. I always use restore database option in the management studio and create a new database from device (customer database backup file), it used to work just fine. But when I do the same now, I get this below error:
CREATE DATABASE permission denied in database 'master'.
RESTORE HEADERONLY is terminating abnormally.(Microsoft SQL Server,Error: 262)
I also tried to create new database option in the management studio, but get the same error. I did run management studio as 'Run as admin'.
Server - Windows 2008 R2
SQL Server 2008 R2, SP1
Hi all
Iam working in Prodcution ENV,Please help how make space
The log file for database 'Home_alone' is full. Back up the transaction log for the database to free up some log space.
Hi All,
I am trying to restore a DB from my production to Standby server..it gives me a mesage "Msg 3105, Level 16, State 1
Data on dump will not fit into current database. Need 6500 Mbyte database."
The production server DB size is 5000MB and I have increased the size of standby DB to 6500MB but still the same message...
HELP!!!!!
Thanks in Advance
We need to implement incremental load in database. A sample scenario is, there is a view (INCOMEVW) which is build on top of a query like
CREATE VIEW INCOMEVW
AS
SELECT CLIENTID,COUNTRYNAME,SUM(OUTPUT.INCOME) AS INCOME
(SELECT EOCLIENT_ID AS CLIENTID,EOCOUNTRYNAME AS COUNTRYNAME,EOINCOME AS INCOME FROM EOCLIENT C INNER JOIN EOCOUNTRY CT ON
C.COUNTRYCODE=CT.COUNTRYCODE
[code]...
This is a sample view. As of now there is a full load happening from the source(select * from INCOMEVW) and loads to target table tbl_Income.We need to pick only the delta and load to the target table using a staging. The challenge is,
1) If we get the delta(Insert,update or deleted rows in the source tables EOCLIENT,EOCOUNTRY,ENCLIENT,ENCOUNTRY, how to load the incremental to
single target table tbl_Income.
2) How to do the Sum operation with group by in incremental load?
3) We are planning to have a daily incremental load and thinking to create the same table structure as source with Date and Flag column to identify
the date and whether that source row is an Insert or Update or Delete with the flag. But not sure how to frame something like this view and load to single target with Sum operations.
I am getting this error :Distributed transaction completed. Either enlist this session in a new
transaction or the NULL transaction. Description:
An unhandled exception occurred during the execution of the current web
request. Please review the stack trace for more information about the error and
where it originated in the code. Exception Details:
System.Data.OleDb.OleDbException: Distributed transaction completed. Either
enlist this session in a new transaction or the NULL transaction.have anybody idea?!
i have a sequence container in my my sequence container i have a script task for drop the existing tables. This seq. container connected to another seq. container. all these are in for each loop container when i run the package it's work fine for 1st looop but it gives me error for second execution.
Message is like this:
Distributed transaction completed. Either enlist this session in a new transaction or the NULL transaction.
Hi,
i am getting this error "Distributed transaction completed. Either enlist this session in a new transaction or the NULL transaction.".
my transations have been done using LINKED SERVER. when i manually call the store procedure from Server 1 it works but when i call it through Service broker it dosen't work and gives me this error.
Thanks in advance.
I am having difficulties loading data from a flat file to a SQL Database. I am able to load some data but the rest gets kicked out for the following reasons:
1 – The field is varchar 50 and I would like to convert it to a date field
2 – The field contain periods (.) (Only 1 period in each row)
3 – The field contain blanks (NULLS)
How do I create a derived column that will bypass blanks (Nulls) and remove periods (.) in each row then convert column to a date field in SSIS? Looking for steps to create a derived date column using SSIS (derived task); convert it to a date column (09-19-2015); use functions to redirect the nulls and possibly remove the period (.)?
[b][u]Sample Data[/u][/b]
Column 3 (Varchar 50) Â Â Â Need to convert to date; remove periods, and bypass nulls(blanks) Â Â Â Â Â Â Â Â Â
Blank
.
Blank
.
Blank
Blank
.
01-19-2015
01-19-2015
Blank
.
Blanlk
.
Blank
01-19-2015
.
Blank
.
I am trying to implement some powerview report in excel 2013 itself (not in sharepoint).
I have implemented a SSAS tabular model and deployed to server. Now my aim is to load this tables in the SSAS tabular database into powerpivot so that i can use this data for creating powerview reports. However when i tried to import data from SSAS, it asks database and MDX query. My requirement is to load the dimension and fact tables to power pivot as it is.