I canceled a restore job, and now the database is marked (Loading). When I go to propertied it tells me "database can't be opened, it's in a middle of a restore" Yet from a Query window I can connect and run queries against that database. Should I just wait until it finishes "Loading" or should I re-start the server?
Thanks
Hi! maybe this question is very common, but i can resolve that. I have a DB marked 'loading', and nothing seems to change this state. Is any way to revert to a normal state, or the only way is destroy and re-create?
Thanks in advance
Hello Gurus,
After the power failure my database was marked suspect. According to my associate we will execute SQL command sp_resetstatus. My question is what are the things we have to do first before we execute the command? We are using NT 4.
thanks
Claudio
I have a 3GB DB that I was running an update script on. The sript failed and ran out of transaction log space. I expanded it and stopped and restarted SQL. The user DB is now marked as recovering. How long should I wait for it to recover? I don't want to have to restore again and start all over with my script. Please help.
(By the way this is a restored DB)
Thanks.
LC
Usman Masood writes "we were using our database named db1. when suddenly it stopped working and upon checking it gave an error that db1 and db2 are marked as suspected. while we were only using db1,,,,what is the cause of this error?"
View 1 Replies View RelatedHi all
I tried this command
DBCC CHECKDB (A2PD,REPAIR_ALLOW_DATA_LOSS)
The above command was not executed as there was some long rollback was going from a user...
I stopped and re started the MSSQLSERVR service...
Then i found the follwing error..
how can i work with the database A2PD marked as suspect
Server: Msg 926, Level 14, State 1, Line 1
Database 'A2PD' cannot be opened. It has been marked SUSPECT by recovery. See the SQL Server errorlog for more information.
Thanks
Hi,I restored my Windows XP system and discovered that I cannot access aMSDE DB that was saved in D: drive (I restored my primary partition inC). How can I restore it?Thanks a lot.
View 6 Replies View RelatedHi there,
I need urgent help regarding a database that has been
marked as suspect.
I need to get the data from the database!!
I have a copy of the structure of the database but I need to get cerain very recent data from the database.
I have tried bcp and it doesn't work.
The backup that I have won't sufice
If a database is marked as suspect, Will it recover?>
And if so how long will it take.
If it won't recover is there any other way of getting the data,
Thanks in advance,
Fin
Hello Friends
I had a really big Problem.
Sorry about my Englisch, came from Austria.
After a SQL Database Restore, who ends with no faults, i cannot connect to it.
In the Enterprise Manager it is marked as "in load" and in the Errorlogfile stand following.
"Bypassing Recovery für Database "WINLINE" because it is marked "in load"?
What does it mean! Please help!!
Thanks for all answers
Mike
Hi All,
Sql Server 7
I have database called ecatalog
i have a scheduled job which shrinks the database every day once at 12 am
today the job got failed
In the view Job history its showing the below contents
-------------------------------------------------------
Database 'ecatalog' is already open and can only have one user at a time. [SQLSTATE 42000] (Error
924) DBCC execution completed. If DBCC printed error messages, contact your system
administrator. [SQLSTATE 01000] (Message 2528). The step failed.
And in Application Log of event viewer its showing the below contents
------------------------------------------------------------------------------
The description for Event ID ( 208 ) in Source ( SQLServerAgent$ABCSQL ) cannot be found. The
local computer may not have the necessary registry information or message DLL files to display messages from a remote computer. The following information is part of the event: Shrink Database
- ecatalog, 0xA0C4F8157A744244A61A4ECABE8C6056, Failed, 4/19/2004 12:00:03 AM, The job failed.
The Job was invoked by Schedule 27 (Shrink Database - ecatalog). The last step to run was step 1 (Shrink Database - ecatalog)..
I ran the job manually it worked fine
but now when i go and see the database ecatalog in my Enterprise Manager
it is showing ecatalog(Single User)
What is the meaning of this, will this make any problem to my database
Please help me in this.
Waiting for Reply
Adil
After I restore a database with SQL the database I cannot access it. However, after restoring using Enterprise Manager I do not have the same problem. The message I get is:
Database 'les_test' cannot be opened. It is in the middle of a restore.
The code I am trying to use for the restore is:
RESTORE DATABASE les_test
FROM DISK = 'c:MSSQL7BACKUPiztrobeta_db_200012011201.BAK'
WITH NORECOVERY,
REPLACE,
MOVE 'biztrobeta_PRI' TO 'c:mssql7DATAiztrobeta_PRI.ndf',
MOVE 'biztrobeta_FGE_Dat1' TO 'c:mssql7DATAiztrobeta_FGE_Dat1.ndf',
MOVE 'biztrobeta_FGX_Idx1 ' TO 'c:mssql7DATAiztrobeta_FGX_Idx1.ndf',
MOVE 'biztrobeta_LOG' TO 'c:mssql7Dataiztrobeta_LOG.ldf'
GO
I tried changing the status in the master..sysdatabases tables, but the restored database was still not accessible. I tried to do this using the following statment:
UPDATE sysdatabases
SET STATUS = 4194316
WHERE name = 'les_test'
GO
Any help is appreciated.
Thanks,
Les
I have the MS SQL2000 database failed to recover at computer restart. Now the database is marked suspect. How can I manage to recover the data?
Thank you.
Please, help
Since a few days ago we are viewing these messages, several time at a day:
3/14/2008 2:18:30 PM AppDomain 1668 (FDESK_CANCUN.dbo[runtime].1679) created.
3/14/2008 2:18:44 PM AppDomain 1668 (FDESK_CANCUN.dbo[runtime].1679) is marked for unload due to memory pressure.
3/14/2008 2:18:44 PM AppDomain 1668 (FDESK_CANCUN.dbo[runtime].1679) unloaded.
In this database only have one assemblie installed created using Vb.Net 2005, please help me how to diagnose where are the problem.
1. Is it possible and what would be the gotchas for taking a backup of a database in a 32 bit instance of sql server 2000 and loading it into a 64 bit instance of 2000? How about 2005 to 2005?
2. Is it possible to reverse that and go from a 64 bit to a 32 bit?
3. How about going from a 32 bit sql server 2000 into a 64 bit sql server 2005?
We're on the verge of upgrading a rather large database from sqlserver 2000 (32 bit) into 2005 (32 bit) but they anticipate eventually upgrading the hardware to 64 bit at least for production. The test node would remain at 32 bit.
Thanks for any help.
I gave the command to restore database and in the middle of recovery i canceled it. now the database is showing 'loading'. I am not able to do any thing to it.please suggest how to make it operational.I also want the data
upto the time, I gave the command 'recover database'.
thanks.
Hi,
I have just restored one of my databases. Now, that database is no longer available to me. It has been marked as 'Database(Loading)'
I have reviewed and tried the suggestions given from previous posts of this same question, and they have not been successful (i.e. 'RESTORE DATABASE DPeople WITH RECOVERY' as well as re-restoring the database).
Any suggestions?
Jim
I have a database that is in (loading) status. Don't know why, we don't have a job running on it.
How to resolve this issue.
I have to load a 4 level XML file into Relational Database.
1. The input xml file contains a DTD definition reference. (Its an external file)
2. When tried using an XML source it prompts to set the prohibitdtd setting to false on xmlreader - How to do this.
3. I have primary keys (identity columns) - which are foreign keys in the next level and these primary keys can be generated only once I insert the record into the table. - What would be the best approach for this kind of Data transformations.
Helo
i want to uplaod and doenload some image from database.
For uploading the image i am doing the folowing things. and it is working fine
i am using Input file of HTML shiiped with .NET and Image control of Asp.NEt
public void OnUpload(Object sender, EventArgs e){ // Create a byte[] from the input file int len = Upload.PostedFile.ContentLength; byte[] pic = new byte[len]; Upload.PostedFile.InputStream.Read (pic, 0, len); // Insert the image and comment into the database SqlConnection connection = new SqlConnection (@"server=NewSSA;database=iSense;uid=sa;pwd=pak"); try { connection.Open (); SqlCommand cmd = new SqlCommand ("insert into Image " + "(Picture, Comment) values (@pic, @text)", connection); cmd.Parameters.Add ("@pic", pic); cmd.Parameters.Add ("@text", Comment.Text); cmd.ExecuteNonQuery (); } finally { connection.Close (); }}
now my problem is i want to downlaod the uploaded image in to my image control
for help thanks in advance
sam
while loading the transaction log dump on a 'STANDBY' database the connection got terminated. as a result the database was marked 'LOADING' and inaccesible. i would like to know if there is a way to get the db out of this mode without having to reapply a full database dump.
P.S. please ignore the previous two messages posted with the same subject line. i inadvertently pressed post twice. sorry for the spam.
Hi,
I have a problem in restoring a Database. I have restored a database of size 25MB only onto a different database. This I have done through Query Analyzer not through Enterprise Manager. After restoration the database changed to Loading mode.
I thought it would take some time and change back to the normal mode. But in my case even after 24 hours database didnot change back to the normal mode. I am able to use database.
The following is the command executed through Query Analyzer,
RESTORE DATABASE Test
FROM disk ='c:mssql7ackuphrmdump.dat'
WITH REPLACE,
MOVE 'Test' TO 'c:mssql7datahrm.mdf',
MOVE 'Test_log' TO 'c:mssql7datahrm_log.ldf'
Can anyone help me please.
tks in advance,
Srinvasan Madhavan.
Greetings,
I am new at SQL and I have been asked to load some data into a database. I was given a file that has an extention .sql. shown below are the first few lines
quote:TRUNCATE TABLE henrylee.[HenryLee]
GO
INSERT INTO henrylee.[HenryLee] ( [custno], [company], [address1], [address2], [city], [state], [zip], [phone], [email] ) VALUES ( 'C00001', 'SUPREME NOVELTY', '5954 S PULASKI ROAD', '', 'CHICAGO', 'IL', '60629', '', '' )
several more rows after this
This looks to me like it was built to be scripted in or use some function of SQL to create and populate the table... does that make sense? Anyway, is there an easy way to insert this data into a table?
Thanks
-B
I have the file with binary data on my hard disk.
Also I have the table in the database with image field.
I want to load binary data from file to this field. Does any body know how can i do it?
I want to do it using only T-SQL, without any Š”# (etc.) coding - only sql script is properly.
I recently installed MSDE on a laptop. I then restored several databases from backup files without problem. However, one database is constantly stuck at the grey colour displaying the (Loading) message.
Why won't this database restore ? It is of course the most important database and I only have the one backup file.
This only appears to fail on his server. Do I need to uninstall MSDE and start over ?
Hi All:I need to make my database unavailable when i am loading the db. Thishappens daily and the db is not connected to any online app, to makethe app unavailable. It is queried thru an Access and hence availableall the time.The load happens daily for an hour in the morning.Is there anyway to make it inaccessible to users while loading dataand then make it accessibleThank youRS
View 1 Replies View RelatedHere's my delema, I have a file that's 308 bytes wide by 5.7 million records. The record length is fixed and the position and width of the known within the record. When I run DTS I recieve this error Msg MS DTS flat file provide and Err Diesdription: error creating file mapping view: not enough storage is available to process this command. Then when I try to continue with the wizard, it will not allow me to separate the data into the format that I need. Is there any other way to import this file using DTS?
View 1 Replies View RelatedIs there a way I can load a SQL2000 DB backup onto a SQL 7 server? Thanks.
View 1 Replies View RelatedI had to restore a database late this afternoon. I have the database set to FULL recovery. Database backups are performed nightly and transaction log backups are performed every other hour. I decided to perform a point-in-time restore. When I restored this way everything seems to go ok and it finishes. Then the database is grayed and says "Loading". Although I tried 4 separate times, one time allowing over an hour, the grayed out database and "Loading" never goes away.
Freaking out I deleted the "Loading" database (didn't delete logs and backup files) and tried a manual restore from the previous night's backup file. It attached and restored properly and was ready to go in 2 minutes.
Of course I wanted to get the transaction log files restored too, since it had work from earlier today. So I tried another restore via point-in-time and got the same old messages. Currently, the database is running with the previous night's backup restored but the users aren't too keen on having to do 5 hours worth of work to catch up to the previous transaction log backup come Monday morning.
Any suggestions?
Thanks,
JB
Hi ,I have a file presumably backup of a User database from a SQLServer(2k) database. I want to load/restore that in a local SQL Serverto be able to see the table , views , etc present in the database.How do I do that ?Thanks,Arijit
View 4 Replies View RelatedHi, there,
I have a Excel cross-tab (multilevel column) report that need to be loaded into a database table. Currently, I am using a Excel macro that convert the columns into rows before loading into the database table. I was thinking whether there is a better way of doing this perhaps in SSIS or using XML.
Any ideas greatly appeciated.
Thank you.
Yong Hwee
I Restored the database from Backup with a Different database Name. I got a message the Restore Database was successful. Still the database has Loading Status. Can you let me know what I have to take that status.
View 1 Replies View RelatedI can run this example from SQL Book Online from sql query analyzer. I can build the TestDB database.
BACKUP DATABASE Northwind
TO DISK = 'c:Northwind.bak'
RESTORE FILELISTONLY
FROM DISK = 'c:Northwind.bak'
RESTORE DATABASE TestDB
FROM DISK = 'c:Northwind.bak'
WITH MOVE 'Northwind' TO 'c: est estdb.mdf',
MOVE 'Northwind_log' TO 'c: est estdb.ldf'
GO
But... When I build stored procedure and call it through VB6. I've got the gray database symbol along with message TestDB (Loading/Suspecting)
Why I cannot run these commands through VB6
Hi all,
I want to know if the System.Xml.XmlTextReader is marked with Host Protection Attributes(HPA) in the SQL Server 2005 CLR. I ask this because when I add a custom class that inherits from System.Xml.XmlTextReader, I get a code access security error at runtime. I am able to register the assembly just fine. I have tested it with all the cases and pretty much sure my code breaks in this class.
My code snippet is shown below:
public class CustomXmlTextReader : XmlTextReader
{
......
......
}
Doesn't really matter what is in this class. It gives an expection even when there is no code inside.
Any help is greatly appreciated.
Thanks,
Jai