I am trying to mirror a database and I keep getting the error Msg 1469 saying that "Database mirroring cannot be enabled because the database is an auto close database on one of the partners. Well.. the database properties is saying "false" under auto-close. What else could be wrong?
View 12 RepliesHi,
I'm trying to add a new transaction log file to a database with mirroring (high safety, automatic failover).
When I add the new transaction log file via SQL management studio, the mirroring status becomes suspended. When I try to restart mirroring, it attempts to re-synchronize and then goes back to the suspended state. Only after I delete the new transaction log file can I sucessfully restart mirroring.
Can you add a transaction log file to a mirrored database? Any ideas would be appreciated.
Also, I'm not sure if this matters, but I am trying this in my development environment and all 3 instances (principal, mirror, witness) are on the same server. It's a long shot, but I thought maybe both the mirror and principal are trying to create the file at the same location on disk.
Thanks,
Don
We have a SQL server 2012 database with size 200mb and Transaction Log has gone up to 34GB.
We have SQL server Mirror is enabled and principal database is running with Full Recovery Model.
How can I truncate/Shrink Log files? Will it impact on existing mirroring setup? I am very much new to SQL server.
I am using SQl Server 2012 Database Mirroring with around 40 gb as mdf and 1 gb as ldf. Now my ldf size increased . How to reduce ldf size while mirror enabled with mirror server and witness server. Can shrink the ldf with mirror enables.
View 4 Replies View Related
Server A = primary SQL DBs (mirroring origination)
Server B = failover SQL DBs (mirroring destination)
For database mirroring a witness is required.
Can the witness live in another instance of SQL on server B?
Using SQL Server 2008, we would like propose mirroring between two servers of a critical database. Since we initiate, may require to clarify on its purpose and also required changes from application end.Any changes required from OS Level? (I believe both servers IP or Host name should be added in host entries. Mirroring ports should be allowed/open including Principal and mirror server IP Addresses): Windows Team.Any changes required from Application? (Instance name, authentication: user name and its password should be added in web config files): Application Team.Any changes required from Network Team?Also for mirroring both the principal and mirror servers should be with same version, does it only mean SQL Server 2008 versions are enough or does it also mean to say build numbers 10.00.4000 should also be same.URL....
View 5 Replies View RelatedHi all,
I am trying to get a MS Access Database to work on my companies intranet. Everything works fine on my laptop with local file paths. After transferring the files to the web server and changing file paths, I get the 2 following errors.
"Data provider could not be initialized"
"Not a valid file name"
I assume that I am having a problem relinking the database, but unsure of how to do this.
All help is greatly appreciated.
We have a server with a database with filestream enabled. The filestream data is in a filegroup with three files spread across 3 LUNs F:, G:, and H: each with a capacity of 1.8 TB.
The file stream containers in those three LUNs reference the same column in the same table.
The F: Drive has only 64 GB free space left. The H: However has around 700 GB free.
We are looking to move some filestream content from the container in F: to the container in H:.
How to check if DB Constraints are enabled in a database?
View 6 Replies View RelatedI am aware that TDE protects data at Rest and not during communication or data in motion (UNLESS you use Encrypted communication channels using SSL certs etc). Hence I am thinking of doing data export from a TDE encrypted database to a database on the instance where TDE is not enabled or supported. I believe it works and need to take care of relationships between tables.The target database is hosted on SQL 2012 standard edition on which TDE is not supported.
View 4 Replies View RelatedI have a database that is the publisher in transactional replication and also part of an availability group. I have put the pertinent certificates on all of the involved servers, and it is encrypted on all servers and operated as expected. However, we are adding additional security for personal data and we have targeted columns in multiple tables for column encryption. I have a master key and certificates that are stored in the master database. Following an example where I am to create the database master key:
-- Create database Key
USE encrypt_test;
GO
CREATE MASTER KEY ENCRYPTION BY PASSWORD = 'Password123';
GO
But when I try to create a certificate on the database:
-- Create self signed certificate
USE encrypt_test;
GO
CREATE CERTIFICATE Certificate1
WITH SUBJECT = 'Protect Data';
GO
It get the following:
Msg 15151, Level 16, State 1, Line 1
Cannot find the certificate 'Certificate1', because it does not exist or you do not have permission.
Can I add a database certificate to an already TDE enabled database and if not to I create the symmetric key through the certificate located on the master database? And how will that effect decrypting the column values in stored procedures and function on the user database?
Is It Possible to Configure Log Shipping On a CDC Enabled Database?
View 4 Replies View RelatedI backed up a database "Broker", and restored it on the same instance as "BrokerQA" (Broker db still exists, I need them both running on the same instance).
View 4 Replies View RelatedHow to find the CDC enabled date and time in database.
View 3 Replies View RelatedFor developers, we often have a need to backup a production database and restore it on local or integration machines. This production database is enabled for service broker and operates at a relatively high traffic level. When the database is backed up, the size is nearly 12GB; when SET NEW_BROKER is subsequently executed on the restored database, the size goes down to about 800MB. It appears that most of this is residing in the xmit queue. So, my question is: how best to backup a production database with queues activated, etc. without ending up with a 12GB backup?
Thanks.
When I try to create a subscription to my SQL Server Compact 3.5-database file, it gives an SqlCeException-message that says that the file is not enabled for replication. How do enable it?
My SQL Server Management Studio won´t connect to my compact server file right now, so that method is not an option for me right now.
We have a new database with cdc enabled on all of its tables. This causes the index maintenance task to fail with following message:
"Executing the query "EXEC DBName.dbo.IndexDefrag_sp" failed with the following error:  "The unique index 'PK_TableName' on source table '[dbo].[TableName]' is used by Change Data Capture.  To alter or drop the index, you must first disable Change Data Capture on the table.  The transaction ended in the trigger. The batch has been aborted.". Possible failure reasons: Problems with the query, "ResultSet" property not set correctly, parameters not set correctly, or connection not established correctly" We would like to run the index maintenance without losing the cdc data. We plan on installing SP2 on SQL Server 2008 R2 soon, would that solve the issue? Disabling the cdc prior to index maintenance and then re-enabling back upon completion; would delete the data as I found in most discussions, but we would like to retain it.Â
I have just finished configuring my first test mirrored environment (High safety mode). I setup the database engine service accounts on each of the servers with domainuser. I inherited a production mirrored environment set up by someone else. On the production servers the database engine service account is NT Authorityuser a local account. I am trying to practice installing Windows updates within a mirrored environment and I not sure how to proceed when the service account is NT Authority user account. should I change the service account to a domainuser?
View 2 Replies View RelatedWhen I issue this command:
ALTER DATABASE foo set PARTNER = 'TCP://10.3.3.1:1234'
I get this error message:
The database is being closed before database mirroring is fully initialized. The ALTER DATABASE command failed.
What does that mean, and how do I fix it?
Hi,
View 6 Replies View RelatedI set up a new mirror server. Everything is good except that the Database Mirroring Monitor is not working for one of the databases. In the monitor the principal data is showing up as blank
If I look at dbm_monitor_data on the principal most of the data columns (e.g. Send_queue_size) are null where as they have data for the other databases.
Both servers are SQL Server 9.0.2047 Enterprise Edition.
Any idea what might be going on here?
Thanks in advance.
Hi All,
Does anybody know the OS requirements for Database Mirroring? I checked BOL and Google but couldn't find any info on that.
Thanks.
Hi All,
I have read on the web that high protection mode not recommended, except in the event of replacing the existing witness server. But I can't find the reason why anywhere. Can anybody explain? Thanks.
Hi All,
Couple of questions about database mirroing.
1. Once the mirroring is setup is it possible to switch between high-protection and high-performance modes? If it is will I have to stop the mirroring, switch the modes and then restart it again?
2. Let's say the principal server went down and I manually failed over to the mirror server. Mirror server runs as a new principal server for a couple of days and then I bring the original principal server back up. What needs to be done in order to bring transactions on the principal server up to date?
Thanks.
for a database mirroring , which stretergy is good.
Creating with witness server or without it.?
I am firsttime doing this , so i am posting it to the forum..
and also if we are creating the database mirroring with witness server for automatic failover , will the witness server need the same amount of harddisk space like the pricipal or mirror server.??
thanks
we want to migrate our production server , without taking the database down.so what we did was , we mirrored the databases from production to one of our development servers and we took the prodcution server for uprgrade.
so today we are moving back (mirroring) all the databases from that development server to our new production server.
my question is , when i move
productionserver_old(principal server) - having the script for principal server
development server(mirror server---->principalserver)) - having the script for mirror server , which is now acting as principal server
new production server(mirror server) - having the script for mirror server. will become principal server , once i moved all the databases
now while mirroring between the developement server and the new production server, i have to run the scripts for the mirror server only.
so both the servers are havign the mirror script now...
is that a problem, or any other way i can handle this....
Hi All,
Does anybody know any good Tutorials for Database Mirroring (Automatic Failover) or Manual Sync with Mirror Server. I tried some sites online, but doesn't have detailed steps..
pls.help as i need to sync data with One of my Mirror using Sql Server 2005.
thanks
Hi,
I have some questions about database mirroring. we have almost 40 databases in one server. Can I set up the database mirroring for all the databases. Is it going to any affect on performance. we have already setup the mirroring on almost 30 databases, and I need to set up for the rest of 10. please some body could help on this. Thank you.
Hi,
i'm a novice of sql server and I have a problem.
I have to reply a server in which there are database that are managed with sql server 2000 sp3; what I must make in order to set up the mirroring between the database of the two server so that the data are always aligned ?
thanks for the attention
best regards
alessandro
I am new user of SQl and preparing the exam database mirroring....can you tell me how i start the mirroirng ..what is my first tep..and is there only one instance
View 3 Replies View RelatedHi All,
Couple of questions about database mirroing.
1. Once the mirroring is setup is it possible to switch between high-protection and high-performance modes? If it is will I have to stop the mirroring, switch the modes and then restart it again?
2. Let's say the principal server went down and I manually failed over to the mirror server. Mirror server runs as a new principal server for a couple of days and then I bring the original principal server back up. What needs to be done in order to bring transactions on the principal server up to date?
Thank you.
Can we have database mirroring for two databases. Like i have an application where in the db used are two, namely DB1 and DB2, DB1 is used in the connection string and with the help of DB1 the tables and sps of DB2 are handled.
in this case can i go ahead with database mirroring. Please comment and give the idea or link on the same.
Hi,
Is there a way to automatically mirror/backup a SQL Express database with a SQL Server 2005 licenced system?
They will be on seperate machines on the internet.
I have done manual backup and restores but would like to allow constant updates to allow both databases to be synchronized.
I read that the SQL Server 2005 version has a mirroring facility but I also read that this is not possible in the Express version.
What other (automated) options do I have?
Thanks Andrew