Database On External Machine
May 11, 2007
Hi,
I have two servers, namely ServerA and ServerB. These two servers are on the same subnet. ServerB has a database called DatabaseB.
I'm logged in in ServerA and trying to pull data from DatabaseB.
This is the query I do when I'm logged in in ServerB (note im using Microsoft SQL Server Management Studio):
USE DatabaseB
SELECT distinct b.Subject
FROM dbo.F_Class_Exam a
LEFT OUTER JOIN dbo.D_Course_Catalog b
ON a.Course_ID = b.Course_ID
WHERE a.Term = '2071' AND a.Class_Exam_Type = 'FIN' AND b.Term = '2071'
ORDER BY b.Subject
How would I do this same query on ServerA? Ideas? Thoughts?
Thanks,
Mikhial
View 7 Replies
ADVERTISEMENT
Nov 26, 2006
hi there - I'm praying someone here can shed some light on this - after many google and web searches, I have found users with similar issues, but have yet to find a solution.
Problem: I have recently upgraded my desktop from Windows XP to Windows Vista Ultimate (clean install) and have migrated my local machine to SQL Server 2005. However I have a number of .Net projects that access databased on another server running SQL Server 2000 - prior to my upgrade to Vista, I was running SQL Server 2000 on my desktop as well. During the install, everything seemed to go well, and I also installed the SQL Server 2005 Service pack as instructed via the MSDN site. However, when attempting to test my .net projects on my desktop pc (ie visit http://localhost), I encounter the error:
An error has occurred while establishing a connection to the server. When connecting to SQL Server 2005, this failure may be caused by the fact that under the default settings SQL Server does not allow remote connections. (provider: Named Pipes Provider, error: 40 - Could not open a connection to SQL Server)
note that the server I am attempting to connect TO is the old SQL 2000 server - NOT 2005. I specify my connection info in the web.config - and it points to an external ip address on the web.
Can anyone shed some light on this? I've tried enabling remote access on my local SQL 2005 install, but I'm fairly sure thats for servers that want to connect to my desktop, rather than my desktop attempting to connect to external servers. Any help is greatly appreciated - I'm pulling my hair out over trying to figure this out! :)
To summarize my setup (if it helps)
Desktop PC:Windows Vista (Ultimate)SQL Server 2005Visual Studio 2005II 7.0.Net 2.0 (ASP.Net Application)
External Server (co-located at a datacenter)Windows Server 2003SQL Server 2000IIS 6.0.Net 2.0 (ASP.Net Application)
Much appreciated,
Ted
View 5 Replies
View Related
Jul 23, 2005
Hi All;We are going to change our application server. We will copy all of ourDatabase from Mic 2000 Server OS to Mic 2003 Server OS. I found anarticle that how to move all the folders from same OS. My question isthat Would the 2003 OS be a problem when we copy all of the MC SQL 2000folders to New OS ? Has anybody done this before? Could you gimme yoursuggestions please?ThanksASA
View 1 Replies
View Related
Feb 20, 2007
Hi, My server went dead(problems with the hard disk), but I have a copy of the whole sql server directory including the database in a external hard disk. I have a new server now and I would like to copy this database (with the reports from reporting services too) from the external hard disk to my new server. can anybody help me please? Thanks.
Note : I have a plain copy of all the sql server directory with all the files including the database not a SQLServer backup done with the wizards.
View 1 Replies
View Related
Aug 21, 2007
I am getting the error
Unable to open the physical file "E:Navision SqlDataForentaSQL_Data.mdf". Operating system error 5: "5(Access is denied.)".
when I try to "attach" to a database located on an external hd. The database files on the external HD were copied from the original server location to the external HD. The file size is 51G+ which is why it is on the external HD.
Can anyone provide me the syntax to do the sp_attach taht will allow me to send the necessary connection string: server, user, pswd etc.
How can I get past this error?
View 1 Replies
View Related
Jan 23, 2002
Hello,
How does one setup the connection to an external SQL/DB2 database? Any help would be appreciated.
Thanks,
Faustina
ifedif@mail.nih.gov
View 1 Replies
View Related
Jul 20, 2005
I have the need to restore a database to a user's laptop on a dailybasis. This has been no problem using Enterprise Manager. I found astored procedure to run the restore and tried to call it from a visualbasic program. While I can connect to the database, I get an errortelling me "exclusive access could not be obtained because thedatabase is in use".Does this mean the only way to run the restore is via EnterpriseManager?Thanks,Tom
View 1 Replies
View Related
May 11, 2006
Hi All,
Quick question ...
Is it possible to add an external server registration using SQL Server Management Studio Express CTP?
Reason being I have been doing some work from home and need to port the data back to the office who are on SQL 2000. I have a database with my web hosting company and wanted to export the data to the 'live' database so I could import to the office database - any ideas?
I've tried to connect using my login details and I know the live DB is operational as I can connect through my work system. I just can't seem to be able to do it on my system at home.
Any help would be greatly appreciated as it's been a real pain to get stuff transferred. I've so far had to generate SQL script to create the procs and tables for when I get to work - the proper down side is that I lose the content of the tables which not much right now but will be loads soon!
Many Thanks
--
I have just dicovered that the CTP management studio will not connect to SQL 7 - is there any alternative or does the new version compensate for this?
View 3 Replies
View Related
Apr 11, 2007
Ok,
I am a webdesigner who at the moment does not know SQL (although, I plan on remedying that) so I am developing a page with a DB designer - he is doing the DB work, I am doing the look/feel, but he asked me the following questions, of which I cannot seem to find an answer and the guys who tend our server are useless - so I am hoping someone here can help me. In general what he needs to know is:
"what is the external address (either in domain format or IP) and the equivalent internal address so that we can access the msSQL running on your server. The internal address is needed for the webpages to talk to it, while the external address is needed for development of the pages in visual studio and the database tools." Also, he later sent me an email asking that when I get this info (from someone) that it would be usefull to get a sample string/query to get access to the DB. I am running SQL 2000 and have enterprise manager. Where can I find this information? or how do I figure this out????
Thank you for all the help -- Please let me know if you need any more info.
View 5 Replies
View Related
Jun 12, 2006
MS-SQL 2005, C# 2.0
I will have many client databases that will be updated. When they are updated I need to transfer some of that data to a central Server database somewhere on the Internet. Note, schemas do not necessarily match.
Transfering the data (Web Services, Remoting) is not a problem.
What I am looking for is a cool, correct, advisable way, for the client database to notify me of an Insert, Update or Delete. I can then initiate the connection to the Server and 'push' the data (maybe pull some back from the Server too).
Obviously Triggers may be a place to start... But I need to know 'external to the database' that an update has happened or can I send the data from within the SQL Server assembly?
Anyone have any ideas or a technique, maybe something new in SQL Server 2005 (all databases will be 2005), for acheiving this? Just so I don't go down the 'wrong' path...
There are some BLOB's involved (1-2 page PDF's), if that makes a difference.
I envisage that the process transfering the data will be a Windows Service running on each client. The connection may not always be available, so some kind of 'to do' list of outstanding data to be transfered is required.
I'm just starting on this, so any pointers would be great, I'm sure it's all been done before ;)
Thanks
Rob.
View 1 Replies
View Related
Jan 28, 2007
Hi again... I guess this is yet another newbie question (Sorry if its been asked before!)
If I have an IP address for an external SQL DB with valid User & Pass... Can I connect to it using SQLExpress on my machine??
If so can anyone point me towards how to do it, or run through it below (In easy steps as I'm dumb )
View 6 Replies
View Related
Mar 13, 2007
Hi,
I'm trying to find out whether it is possible to integrate an external entity into MS SQL Server in following way:
the entity defines certain set of tables
when user performs a query on one of these tables, the query is sent to the entity for processing and results are returned back to SQL server (and to client)
I thought integration services could be used for this task, but I'm quite unfamiliar with MS SQL server, so I don't know whether it would be a feasible solution...
View 4 Replies
View Related
Jan 16, 2008
Hello all,
I have been reading these forums for a while but I am now a new member and relatively new to SQL (< 1 year exp).
In a project that I am currently working on I would like to include information related to current market news. An example would be news updates for certain companies that are generated from the Wall Street Journal or MarketWatch. The application would only be used internally and information would only be shared within the organization.
What I'd like to find out is:
Has anyone else worked with or developed something like this? If so, can you please share some insight.Would I need to purchase a Corproate License to use this information or would a personal account that can access the information be enough?What would be the best way to feed the database with this information? E-mails to the server, SSIS, etc.
Thank you for your help and I look forward to learning from you insight and experience.
View 3 Replies
View Related
Mar 6, 2005
Hi
I have created a .net application using visual studio .net and sql server destop edition on my pc. I have exported the database tables and stored procedures and imported them into a Sql Server database on a web hosting service. The web host does not allow me to access this database directly through visual studio .net.
My connection string to the external database works ok and I can access my stored procedures through my web pages. I know they accept parameters and that I can receive Return Values from them. However, whenever I try to access any of the tables on the external database through a stored procedure, I get a sqlException saying that the table cannot be found (Invalid object name 'UserList').
I have created a text type command which selects data from one of the tables and this runs through without any errors. I have also managed to Insert a row onto one of the external tables also by using a text type command. My only problem seems to be with commands using stored procedures.
Just in case this is the problem - the owner of the table/procedures on my desktop is shown as dbo but on the external database the owner of the tables is shown as [domainname].co.uk_dbuser while the stored procedures owner is still dbo.
Example of stored procedure on external database:
/****** Object: Stored Procedure dbo.AddUser Script Date: 01/03/2005 21:10:06 ******/
CREATE PROCEDURE dbo.AddUser
(
@Username Varchar(20),
@Password Varchar(20)
)
AS
(
Select User_ID From UserList
Where User_Username = @Username
)
GO
Have tried changing dbo.AddUser to [domain].co.uk_dbuser.Adduser but this would not save because there were too many full-stops!
Any help would be greatly appreciated as I am completely stuck.
John
View 2 Replies
View Related
Jul 13, 2015
I have two domains. forest domain abc which has the exchange infrastructure. forest domain xyz which does not have exchange. There is a two way trust set up.
I have set up database mail which sends internally but not externally on the xyz domain its uses mailrelay address to comunicate with exchange. The receive connector is set up correctly on exchange on domain abc as I have managed to send email from a sql server to external contact in the abc domain.
The IP addresses are correct on the receive connector.
The problem is I am unable to send to an external contact from the sql server in the xyz domain. Not sure if this an exchange issue or database mail.
View 2 Replies
View Related
Jan 3, 2008
C# .Net Application as front end
Sql Server2000 as back end
I need to merge an external dataset from .Net app(in XML format) with the information in database with one column in database table as the merging criteria. A situation similar to Left Outer Join, wherein i need all records from external dataset and if matched in database the corresponding values from there too, the only difference here is that the join is not between two Tables its between a table and external dataset.
There is no need to store the external dataset in the database in persistent form, its just a query - merge - response operation.
So, can anyone suggest the best possible solution for this? A table variable / temporary table / some other schema, what and how?
Thanks in advance..
View 8 Replies
View Related
Nov 15, 2006
Hola!I'm currently building a site that uses an external database to store all the product details, and an internal database that will act as a cache so that we don't have to keep hitting the external database to retrieve the products every time a customer requests a list.What I need to do is retrieve all these products from External and insert them into Internal if they don't exist - if they do already exist then I have to update Internal with new prices, number in stock etc.I was wondering if there was a way to insert / update these products en-mass without looping through and building a new insert / update query for every product - there could be thousands at a time!Does anyone have any ideas or could you point me in the right direction?I'm thinking that because I need to check if the products exist in a different data store than the original source, I don't have a choice but to loop through them all.Cheers,G.
View 2 Replies
View Related
Sep 24, 2007
Hi
I'm a newbie at SQL 2005 and I'm trying to create linked tables to our ERP system through ODBC. I can do this in MS Access or vb.net by using the ERP system's ODBC driver, but I am lost when it comes to SQL Server 2005.
Thanks for any help
View 1 Replies
View Related
Apr 9, 2007
I need to create a SQL server database and add some tables to it. Then access it with a C# application. The problem is that the new SQL server database and it's tables must reside on an external hard drive. How do I point SQL server to this external drive, so that I can create a database on this drive and then create tables and access data on it?
View 7 Replies
View Related
Oct 19, 2006
OS: Windows XP (SP2)
App: MS Access 2003 (SP2)
DB: MS SQL 2000 (SP4, 2040)
User is using MS Access linked table to query database (using ODBC). User can open the query in MS Access. However when the user goes to export the data to MS Excel format, the user receives the error message:
"Unexpected Error from External Database Driver (22)."
A trace on the db, reveals that the user process is attempting to log in to the server as 'Admin'. However, when the query with the linked table is first opened, the user is prompted for username/password (non Windows authentication).
Any ideas? I googled and found some stuff, but nothing directly related and most of what I found was supposedly fixed with SP1.
Any help appreciated. I am not an Access guru.
Regards,
hmscott
View 1 Replies
View Related
May 20, 2008
Hello Everyone
I want to install only the Reporting Service (and Analyzing Service) on a machine without any database (I will create a dedicated SQL Machine later on). Now, after the installation process I can see a SQL Server in my Installed Programs View. To me this looks like a complete SQL Server installation,but this is not what I wanted (I only checked the two services during the Setup). Or are those just some supoorting components?
Thanks
View 2 Replies
View Related
May 4, 2007
Help!
I am using Script Transformation to output a new column as image[DT_IMAGE]
field to store serialized object. In the VB script, the sample code as
Row.serializedobject.AddBlobData ( binaryArrayReturnedFromC#dll )
The package always runs fine on my developing machine and will halt on other
machine at AddBlobData after certain number row records were processed. I am
stuck here. Anyone has any suggestion?
What I need is reading data from mutiple tables in one database and writing
into a single table in another datable. In order preserve all the columns
data, I use input column fields to construct a new object and then serialize
it, and store the serialize data into detination db table. (The object and
serialization function is coming from c# dll.)
Dim b As BusinessLicense = New BusinessLicense()
b.ApprovalDate = Row.approvaldate
b.BusinessId = Row.busid
b.BusinessName = Row.busname
b.NaicsCode = Row.naicscode
b.NaicsDescription = Row.naicsdescr
b.OwnerName = Row.ownername
b.Phone = Row.phone
b.Pkey = Row.pkey
b.RenewalDate = Row.renewaldate
b.StartDate = Row.startdate
b.Suite = Row.suite
Row.serializedobject.AddBlobData(Serializer.Serialize(b)) '''----This is blocking line
Row.infoType = BusinessLicense.TYPE
Both machine is xp with sp2. and standard SQL Server 2005 - 9.00.1399.06
Thanks!
View 4 Replies
View Related
Nov 28, 2006
Hi All,
I have enterprise version software CD1 and CD2 of SQL server 2005
when i try to run setup.exe..the following error pops -up
The image file Setup.exe is valid, but is for a machine type other than the current machine
MY OS version is windows 2003 32bit Operating system...
I am suspecting the binarie may be of 64bit.. How do we check the binaries are 32 bit and 64 bit software
Thanks for your Help
Mohan
View 4 Replies
View Related
Nov 16, 2006
Hi to everyone,
I'm facing a problem that drives me crazy. I've a web application that has the following problem. When I test the application on my developement machine all runs fine, but when I put into production server there is a problem in connection pooling. Look at the following image, the blue line is the number of connection in the pool and the violet line is the number of connection reclaimed. From the image it is clear that connection are returned on the pool only in block, maybe when the garbage collection pass and reclaim the object. The strange thing is that on my developement machine all is good, and also I'm using Enterprise Library and the connection are managed internally.- Thanks to everyone for any help.
View 2 Replies
View Related
Oct 2, 2000
Hullo all
I have two machines,
One is a standalone machine and the other is on a domain network. How can I run a stored procedure/job on the standalone machine from the domain machine ?
running the procedure as a Domain user results in a failed job/stored proc.
also creating an sql login and attempting to run it as that user also fails. How can I solve this problem ?
please e-mail me at wayde@sunnygrp.com if you have any thoughts...
View 1 Replies
View Related
Jan 29, 2008
What is the fastest way to get a copy of a SQL server database on a server to my local Windows XP Professional system?
View 4 Replies
View Related
Jan 26, 2006
I am using SQL Server 2005 Management studio. I already created a database including the table with stored procedure. Now, I want to copy all my database data, including the table and stor proc into my laptop. How I can do that? How I can save my database data in management studio into external drive (pen drive or external drive) then tranfer into my personal laptop?
Please help...
Thanks
View 8 Replies
View Related
Feb 18, 2004
Hi All,
Is it possible to backup a database exists on MACHINE A to on of the folder on MACHINE B through DATABASE MAINTAINCE PLAN WIZARD.
thanks..
Jes.
View 1 Replies
View Related
Apr 18, 2001
I have a backup file in SQL Server 6.5 on machine A and wish to restore the database on another server on machine B but I cannot figure out how to do this...There is not enough room on one machine for both the database and the backup file and I cannot seem to be able to create a backup device on a different machine. ... ... HELP.
View 3 Replies
View Related
Jan 15, 2007
I'm a beginner user. I'd like to move the whole database from a work station to a server, how should I do it in a safe way? First of all, I have a very basic question: How could I save a database in SQL Server? Thanks in advance.
View 3 Replies
View Related
May 17, 2007
machine A and B in the same network.
A has dbs A1, A2,A3...
B has dbs B1 B2 B3....
I conect to B first using sql query analyzer. how I can access A1 in A?
Thanks.
Jeff
View 8 Replies
View Related
Jul 20, 2005
How would I copy an entire database to another (using a differentname, of course) on the same server? I am new with working withdatabases, so any help would be appreciated. Thanks.
View 3 Replies
View Related
May 1, 2007
Im guessing this is the right forum for this question:
I have a database on a WS2003 box running on MSDE 2000. Were trialling SQL 2005 (currently running on Win XP pro) so what i would like to do is to "copy" the database from the WS2003 box to the XP SQL box. So we can evaluate the database and see what SQL does/doesnt do.
1. How can this be done please?
2. Will it do anything to the original database?
3. Can this be scheduled to be done everyday? if yes how please?
Thank you in advance.
View 4 Replies
View Related
