Database Prompts In SSRS Cannot Be Deselected
Oct 15, 2007
Hi,
Suppose I have two prompts, say A and B.
These two prompts are populated by using database queries.
B is dependent on A.
These prompts are multiselect.
I have noticed that it is not possible to deselect them once a value(s) are selected.
If I deselect all in A. They automatically get selected again.
They work fine as long as some value selected.
It is possible however to deselect all in B.
Thanks in advance.
View 6 Replies
ADVERTISEMENT
Jun 30, 2005
This question is for Bill directly. Hi Bill, I have lots of experience with RS, implementing the beta in a production environment, I was so impressed. Currently my company uses Cognos for financial reporting, and I am hoping to replace this with RS and MSAS. I have little knowledge of MDX, so I have been using your various series of articles to get up to speed. However, I don't get the article Mastering OLAP Reporting: Cascading Prompts. I fully understand how to build the prompts, but there seems to be a step missing in the article. You never replace the hardcoded where clause in the base dataset, and I can't seem to work out how to pass the parameter from the cascading prompts to the report. Maybe I'm being stupid, but the article doesn't seem to tell us how to do that.
Many Thanks
Sam
View 3 Replies
View Related
Nov 13, 2006
Hi guys
I have been asked to develop a query which when run will prompt the user to enter the number of months before runnin the query.
I know we can do this in MS Acess .
can we do the similar sort of thing in SQL as well??
My query is
SELECT DHBMappingTable.[DHB Name], Agency.DHB_service, PurchaseUnitMappingTable.PU, PurchaseUnitMappingTable.PU_name,
SUM([NMDS Data for IDF Report].[Number of caseweighted discharges]) AS Expr1, AVG(wies2.[0607_cwd_WIES11]) AS Expr2,
AdmissionMappingTable.Admission, wies2.Admission_type
FROM DomicileCodes
In the above query, I need to multiply "0607_cwd_WIES11" with the no. of months
Lets say if the user is being prompted to enter the no of months and he enters 3, then "0607_cwd_WIES11" should be multiplied by 3 and divided by 12.
Do i have to use stored procedures(which I have got no knowledge of)
What do I have to do??
Pls help
Thanks
Mita
View 5 Replies
View Related
Oct 19, 2006
I would like to set up a prompt / filter as part of the model that carries through to the report builder. I have a query where I would like to force a prompt on the user as part of any report they create. Ideally, I would like to have it default as well.
I noticed that there is a prompt attribute in model designer. When I go to add the filter attribute in model designer, I get the same dialog box I get in the report builder - except it does not have the prompt as an option. Is there a way to accomplish this?
Thanks
View 3 Replies
View Related
Jan 24, 2008
Hello everyone,
I have a request to hide certain parameters in a report based on the current user logged into our web based report viewer using the ReportViewer control fo asp.net.
I am doing the standard stuff required to display the report as shown below.
Code Snippet
rptViewer.ServerReport.ReportServerUrl = new Uri("http://172.17.144.26/ReportServer"); // new Uri(MINETSecurity.WebSettings.WebServerPath, UriKind.Absolute);
rptViewer.ServerReport.ReportPath = ReportName;
rptViewer.ServerReport.DisplayName = "Report1";
rptViewer.ServerReport.ReportServerCredentials = new CustomReportCredentials("myUsername", "myPassword", "myDomain");
Now that i have loaded the report into the viewer i illiterate through the report parameters looking for the ones which the specified user should not see as show below.
Code Snippet
ReportParameterInfoCollection MyReportParams = rptViewer.ServerReport.GetParameters();
foreach (ReportParameterInfo MyParameter in MyReportParams)
{
// returns a value from a custom class which is a predefined value for this user based on the current user logged into the website
string Value = CustomParameterValues.ToString(GlobalUserSettings.CurrentUser.CustomValueList);
if(Value != "") MyParameter.PromptUser = false;
}
Here is where the promblem lies, when i try to set the value of PromptUser i get the following compiler error.
Property or indexer 'Microsoft.Reporting.WebForms.ReportParameterInfo.PromptUser' cannot be assigned to -- its is read only
Is there anything i can do to set certain parameters invisible to the user and set there value myself. I know i could create 2 seperate reports and set the PromptUser value in the designer but i dont really want to be duplicating reports just to hide or show parameters.
I have tried using the SetParameters method of the ReportViewer component to pass the value of the parameters that should be hidden and even set the visible property to false, but it dosn't seem to work.
Any help here would be appreciated.
Cheers
Scott Blood
View 8 Replies
View Related
May 22, 2008
Hello,
We want to have one prompt (parameter) to set a point in time, so we can use this parameter as filter in other elements.
e.g. We have a point in time prompt, that we can set and use to filter by examples illness records and availability record (by the same (one) prompt)
View 9 Replies
View Related
Jan 15, 2005
Hi
Is there any why to Create SQL Server Objects from Command Prompts like (Databases , Tables, Stored Procedures, …) ??
If you will Install some Applications Like this forums you will see the SQL Server object Created from Command Prompts
How Can I do that .. ??
And thanks with my regarding
Fraas
View 1 Replies
View Related
Jan 5, 2008
I am running a report which takes a long time to render. It has 500K rows in it that need to be summed and grouped. After 5 minutes IE prompts for a password. I set the report time out to 15 min just to see if it would make a difference. I even set the IIS timeout to an to 15 min as well.
I know that its bad to run a report this big, but I'm just curious why it prompts for a password. In case a user runs the report. Report uses dates so its possible they could go way back and not realize its 500K rows. I am assuming it is an IE issue with the browser and found a registry edit, but I don't really want to edit registries on my users' computers.
View 1 Replies
View Related
Sep 27, 2007
hye everyone,
i have Problem for the prompts will display at the top of the report in the browser :
1)go to the report manager on computer and set the
set the Prompt User check boxes to checked.
--> auto check
2)select the report viewer control, if you are using it, and set the Parameters property to false.
--> the eror mesage will be display
" The ' field " parameter is missing value. "
what should i do...any idea
thanks in advance
thank you very much
View 1 Replies
View Related
Sep 16, 2004
Hello -
I dont know something weired happened on our MSSQL server today. We are able to connect to any Databases from Enterprise Manager from a Remote server.
Once we logged in and connected to a database on my database server, it keep prompting for the user id and password as we browsing through different tables in that database?
(Right click on the table then select Open Table -> Return all rows -> and it prompts for password )
Now when we enter password the contents of Table are displayed and now when we try to see contents of another table in the database it again prompts for password.
Any Idea whats wrong? How this can be resolved as it was not happening before .. :(
View 1 Replies
View Related
Nov 20, 2015
I run these stored procedure to build the report and I am able successfully to build the report but I need some prompts to in the report to get the specific data .
ALTER
PROCEDURE [dbo].[Sharepoint_Ticket_Report]
@StartDate
DATETIME,
@EndDate
[Code] ....
And for prompts how to create created_by and message_type dropdowns as shown in picture.
View 7 Replies
View Related
Dec 10, 2014
I have an encrypted database in server A. The reporting service is running on server B. I deployed all my reports to Server B. When I run the reports, I got the following message:
The report server cannot decrypt the symmetric key that is used to access sensitive or encrypted data in a report server database.
I googled the problem, some said to backup the key, but when I opened the reporting service configuration tool to backup the encrypted, it said I needed to restore the key first. Some said I need to delete the key, but that defeated the purpose of an encrypted database.
View 0 Replies
View Related
May 21, 2007
I haven't used SSRS much but I need to connect a database in MYSQL for SSRS. I right click on Datasource and do add new datasource but the only option I see is SqlNative client and Oracle client. How do I go about connecting to my database in MYSQL
View 3 Replies
View Related
Apr 13, 2007
Hi All,
My Report Server works find but after apply SQL Server 2005 Service Pack2. I can't connect to ReportServer Database. When Trying to connect from SQL Server Management Studio i get following Page.
TITLE: Connect to Server
------------------------------
Cannot connect to VISTA.
------------------------------
ADDITIONAL INFORMATION:
Client found response content type of 'text/html; charset=utf-8', but expected 'text/xml'.
The request failed with the error message:
--
<html>
<head>
<title>
SQL Server Reporting Services
</title><meta name="Generator" content="Microsoft SQL Server Reporting Services 9.00.3054.00" />
<meta name="HTTP Status" content="500" />
<meta name="ProductLocaleID" content="9" />
<meta name="CountryLocaleID" content="1033" />
<style>
BODY {FONT-FAMILY:Verdana; FONT-WEIGHT:normal; FONT-SIZE: 8pt; COLOR:black}
H1 {FONT-FAMILY:Verdana; FONT-WEIGHT:700; FONT-SIZE:15pt}
LI {FONT-FAMILY:Verdana; FONT-WEIGHT:normal; FONT-SIZE:8pt; DISPLAY:inline}
.ProductInfo {FONT-FAMILY:Verdana; FONT-WEIGHT:bold; FONT-SIZE: 8pt; COLOR:gray}
A:link {FONT-SIZE: 8pt; FONT-FAMILY:Verdana; COLOR3366CC; TEXT-DECORATION:none}
A:hover {FONT-SIZE: 8pt; FONT-FAMILY:Verdana; COLORFF3300; TEXT-DECORATION:underline}
A:visited {FONT-SIZE: 8pt; FONT-FAMILY:Verdana; COLOR3366CC; TEXT-DECORATION:none}
A:visited:hover {FONT-SIZE: 8pt; FONT-FAMILY:Verdana; colorFF3300; TEXT-DECORATION:underline}
</style>
</head><body bgcolor="white">
<h1>
Reporting Services Error<hr width="100%" size="1" color="silver" />
</h1><ul>
<li>The report server cannot open a connection to the report server database. The logon failed. (rsReportServerDatabaseLogonFailed) <a href="http://go.microsoft.com/fwlink/?LinkId=20476&EvtSrc=Microsoft.ReportingServices.Diagnostics.Utilities.ErrorStrings&EvtID=rsReportServerDatabaseLogonFailed&ProdName=Microsoft%20SQL%20Server%20Reporting%20Services&ProdVer=9.00.3054.00" target="_blank">Get Online Help</a></li><ul>
<li>For more information about this error navigate to the report server on the local server machine, or enable remote errors</li>
</ul><hr width="100%" size="1" color="silver" /><span class="ProductInfo">SQL Server Reporting Services</span>
</ul>
</body>
--. (Microsoft.SqlServer.Management.UI.RSClient)
------------------------------
BUTTONS:
OK
------------------------------
Colud anyone help me to resolve this issue please???
Thank you very much.
Regards,
Balwant Patel
View 10 Replies
View Related
Nov 20, 2007
Hi all,
I need to connect with the Oracle Database for the Reports application. But i am unable to do the same. I am getting errors like ORA-12514,ORA-06401 while trying it.
(1) Please tell me about any extra settings need to be done in the listener.ora,tnsnames.ora for getting SSRS connected with the Oracle DB.
(2) Tell me the format of the connection string to be used for the connection with the Oracle database.
(3) Also which datasource has to used.. Oracle / Microsft OLEDB provider for Oracle for the Same.
Please help me with these issues.
With Thanks
M.Mahendra
View 4 Replies
View Related
Sep 10, 2007
Hello everyone,
Greetings! I just found this group after wasting hours trying to make
SSRS work with databases that are already created (that is, the DBA
created two empty databases for me, X and XTempDB).
I keep getting "this connection string is invalid can't use this to
connect to SQL Server" in the Database Setup tab.
The problem is that to create its own database, SSRS needs dbcreator
and securityadmin roles (please correct me if I'm wrong here). And I'm
having a helluva problem trying to convince the DBA to give me
temporary dbcreator and securityadmin roles!
Is there any document or
something that I can use to convince him that SSRS will not do
anything like recreating the login (because he said that the login has
already existed and has its role set up in many other databases)?
Any help, pointers, suggestions, etc. is very much appreciated.
Thanks,
Ray
View 7 Replies
View Related
Nov 1, 2012
I am using SQL Server 2005 and SSRS 2005, and I am trying to display a PDF (image datatype, application/pdf filetype) from a SQL Database. Â There is no MIME option for PDF, so it seems my options are limited. Â Is there a way to display the PDF, or maybe convert the binary data at the database level?
View 2 Replies
View Related
Nov 20, 2007
Will like to get some feedback regarding SSRS 2005 with Oracle Database.
Please advice pros and cons..
Thanks in advance and if anyone in such environment is here please respond.
Seems oracle discoverer is useless
View 9 Replies
View Related
Apr 11, 2008
Hi
In my current project we are dealing with a lot if Infopath forms of all sizes and complexities. currently they are being saved in Forms library of sharepoint.
We need to build a warehouse for SSRS which receives data either from content database or from infopath forms submit with minimum latency.
I thought of few alternatives, but, not sure which is most robust and economical.
1. Built c# classes to parse XML of infopath forms and then push data to SQL using ADO.net and SQL stored procedure while item is being added (ItemAdding) to Forms Library.
2. Use CAML queries to extract XML from forms library and then continue with C#/ADO/SQL..
3. Use SSIS APIs and webservices to massage XML and put it to SQL at ItemAdding event
4. Use CAML queries to generate XML files and stage it to FTP and rest will be done on SSIS.
I am currently looking for feseability information based of Besy Known Practise. Please feel free to suggest a totally new approach, if available.
Thanks
View 3 Replies
View Related
Sep 26, 2007
Hi,
I am successfully installed SSRS 2005 in my PC winxp sp2.
BUt while trying to configure database (Previous 5 steps are green) i get the following error.
The feature: "Using other editions of SQL Server for report data sources and/or the report server database" is not supported in this edition of Reporting Services
my database version
Microsoft SQL Server 2005 - 9.00.1399.06 (Intel X86) Oct 14 2005 00:33:37 Copyright (c) 1988-2005 Microsoft Corporation Express Edition on Windows NT 5.1 (Build 2600: Service Pack 2)
my reporting services version
ReportingServicesService!resourceutilities!9!9/26/2007-08:57:28:: i INFO: Reporting Services starting SKU: Standard
thank you in advance for any pointers.
regards
sahridhayan
View 1 Replies
View Related
Jun 1, 2007
Following upgrade to SSRS2005, Reporting Services worked EXCEPT from within applications or from scheduled jobs. Running reports from application-generated URL€™s produced the following error: €˜An internal error occurred on the report server. See the error log for more details€™. These same reports, however, ran perfectly from within SSRS. After running them once from Reporting Services, they subsequently run without problem when called by applications or jobs.
Examples of these errors include the following (stack traces available if needed):
ReportingServicesService!runningjobs!13!5/27/2007-01:57:23:: i INFO: Adding: 1 running jobs to the database
ReportingServicesService!chunks!f!05/27/2007-01:58:34:: e ERROR: LockSnapshotForUpgrade: System.Data.SqlClient.SqlException: Timeout expired. The timeout period elapsed prior to completion of the operation or the server is not responding.
at System.Data.SqlClient.SqlConnection.OnError(SqlException exception, Boolean breakConnection)
at System.Data.SqlClient.SqlInternalConnection.OnError(SqlException exception, Boolean breakConnection)
at System.Data.SqlClient.TdsParser.ThrowExceptionAndWarning(TdsParserStateObject stateObj)
ReportingServicesService!chunks!1a!05/27/2007-01:58:34:: e ERROR: GetChunkPointerAndLength: System.Data.SqlClient.SqlException: Timeout expired. The timeout period elapsed prior to completion of the operation or the server is not responding.
at System.Data.SqlClient.SqlConnection.OnError(SqlException exception, Boolean breakConnection)
at System.Data.SqlClient.SqlInternalConnection.OnError(SqlException exception, Boolean breakConnection)
at System.Data.SqlClient.TdsParser.ThrowExceptionAndWarning(TdsParserStateObject stateObj)
ReportingServicesService!chunks!11!05/27/2007-01:58:34:: e ERROR: ### SnapshotConverter(00d68151-85e5-4669-a0de-28ed81bd091c, True), System.Data.SqlClient.SqlException: Timeout expired. The timeout period elapsed prior to completion of the operation or the server is not responding.
at System.Data.SqlClient.SqlConnection.OnError(SqlException exception, Boolean breakConnection)
at System.Data.SqlClient.SqlInternalConnection.OnError(SqlException exception, Boolean breakConnection)
at System.Data.SqlClient.TdsParser.ThrowExceptionAndWarning(TdsParserStateObject stateObj)
Log entries below correspond to the following attempts to run a specific report.
ENF_Comprehensive_Report 5/31/2007 9:43:37 AM rsInternalError
(one of many user attempts to run from app after upgrade)
ENF_Comprehensive_Report 5/31/2007 10:50:57 AM rsSuccess
(first successful run after upgrade; run from within SSRS)
ENF_Comprehensive_Report 5/31/2007 11:09:59 AM rsSuccess
(first successful run by user from application)
It appears that after the upgrade Reporting Services was attempting to use non-existent or invalid chunks and snapshots to satisfy application or job originated requests. When first called from within SSRS, the old chunk was accessed but then appears to have been ignored, with subsequent calls running without a chunk. Our workaround for the problem was to manually run each of our 200+ reports from within SSRS to €˜initialize€™ them for applications and jobs.
Typical Application Request Failure for report:
w3wp!library!a!5/31/2007-09:43:22:: i INFO: Cleaned 0 batch records, 0 policies, 4 sessions, 0 cache entries, 5 snapshots, 46 chunks, 0 running jobs, 0 persisted streams
w3wp!library!a!05/31/2007-09:43:37:: i INFO: Call to RenderFirst( '/Enforcement/Historical/ENF_Comprehensive_Report' )
w3wp!chunks!a!05/31/2007-09:43:37:: i INFO: Returning old chunk for: (24788648-41c5-43d8-ba6b-409662211a37, 'CompiledDefinition', 0)
w3wp!runningjobs!6!5/31/2007-09:44:29:: i INFO: Adding: 1 running jobs to the database
w3wp!chunks!a!05/31/2007-09:45:37:: e ERROR: ### SnapshotConverter(24788648-41c5-43d8-ba6b-409662211a37, True), System.Data.SqlClient.SqlException: Timeout expired. The timeout period elapsed prior to completion of the operation or the server is not responding.
ßstack trace entries here€”>
w3wp!library!a!05/31/2007-09:45:37:: e ERROR: Throwing Microsoft.ReportingServices.Diagnostics.Utilities.InternalCatalogException: An internal error occurred on the report server. See the error log for more details., ;
Info: Microsoft.ReportingServices.Diagnostics.Utilities.InternalCatalogException: An internal error occurred on the report server. See the error log for more details. ---> System.Data.SqlClient.SqlException: Timeout expired. The timeout period elapsed prior to completion of the operation or the server is not responding.
ßstack trace entries here€”>
--- End of inner exception stack trace ---
w3wp!webserver!a!05/31/2007-09:45:37:: e ERROR: Reporting Services error Microsoft.ReportingServices.Diagnostics.Utilities.RSException: An internal error occurred on the report server. See the error log for more details. ---> Microsoft.ReportingServices.Diagnostics.Utilities.InternalCatalogException: An internal error occurred on the report server. See the error log for more details. ---> System.Data.SqlClient.SqlException: Timeout expired. The timeout period elapsed prior to completion of the operation or the server is not responding.
First run of report from within Reporting Services following upgrade:
w3wp!library!19!05/31/2007-10:50:30:: Call to GetPermissionsAction(/Enforcement/Historical/ENF_Comprehensive_Report).
w3wp!library!19!05/31/2007-10:50:30:: Call to GetSystemPropertiesAction().
w3wp!library!19!05/31/2007-10:50:30:: Call to GetPropertiesAction(/Enforcement/Historical/ENF_Comprehensive_Report, PathBased).
w3wp!chunks!19!05/31/2007-10:50:30:: i INFO: Returning old chunk for: (24788648-41c5-43d8-ba6b-409662211a37, 'CompiledDefinition', 0)
w3wp!library!1!05/31/2007-10:50:31:: Call to GetSystemPermissionsAction().
w3wp!library!1!05/31/2007-10:50:31:: Call to GetPropertiesAction(/Enforcement/Historical/ENF_Comprehensive_Report, PathBased).
w3wp!library!e!05/31/2007-10:50:31:: Call to GetSystemPropertiesAction().
w3wp!library!1!05/31/2007-10:50:56:: Call to GetPermissionsAction(/Enforcement/Historical/ENF_Comprehensive_Report).
w3wp!library!6!05/31/2007-10:50:56:: Call to GetSystemPropertiesAction().
w3wp!library!6!05/31/2007-10:50:56:: Call to GetPropertiesAction(/Enforcement/Historical/ENF_Comprehensive_Report, PathBased).
w3wp!library!6!05/31/2007-10:50:56:: Call to GetSystemPermissionsAction().
w3wp!library!6!05/31/2007-10:50:56:: Call to GetPropertiesAction(/Enforcement/Historical/ENF_Comprehensive_Report, PathBased).
w3wp!library!6!05/31/2007-10:50:56:: Call to GetSystemPropertiesAction().
w3wp!library!1!05/31/2007-10:50:57:: i INFO: Call to RenderFirst( '/Enforcement/Historical/ENF_Comprehensive_Report' )
w3wp!webserver!1!05/31/2007-10:50:58:: i INFO: Processed report.
Subsequent application request for same report:
w3wp!library!11!05/31/2007-11:09:59:: i INFO: Call to RenderFirst( '/Enforcement/Historical/ENF_Comprehensive_Report' )
w3wp!webserver!11!05/31/2007-11:10:00:: i INFO: Processed report. Report='/Enforcement/Historical/ENF_Comprehensive_Report', Stream=''
Environment: 32-bit WK3 Enterprise R2 SP2 with single instance of SQL2000 SP3 hosting SSRS2005 SP2 metadata; IIS running in 6.0 isolation mode; separate dedicated IIS server; dedicated domain user accounts for service accounts and application pools. Over 200 reports deployed, half of which are run by users from within applications.
SSRS upgrade process: backup up existing databases, settings, keys; uninstall SSRS2000; perform €˜files only€™ install of SSRS2005 to existing SQL2000 instance; manually configure SSRS2005 and IIS; upgrade reporting services databases.
This is a followup of a previous posting to this forum 30-May 6:28 pm UTC: Problems following SSRS database upgrade.
View 2 Replies
View Related
Aug 11, 2015
I have to display check box against each value coming from the table in SSRS. I have tried using html tags in an expression but it is displaying only for the first field.
Ex: my table contains Medical details with Type column with 3 rows Type
Prevention
Relief
Required
in my report i have to display asÂ
View 3 Replies
View Related
Jan 23, 2007
How to display an database image in the Report page header of sql server reporting service?
View 3 Replies
View Related
Feb 19, 2008
"Short" Story Version:
I have a VS 2005 Web Appplication solution that uses SQL Server Reporting Services 2005. One of the projects is a Report Server Project. In this project I have an RDL file that has:
1.)a non-shared XML DataSource (no credentials),
2.)a DataSet with a Command Type of Text and a Query String that is as follows:
<Query>
<XmlData>
<Root>
<LOAD LOAD_ID_PREFIX="" LOAD_ID="" TRUCK="" DIAGRAM=""/>
</Root>
</XmlData>
</Query>
3.)a field that comes from the Database that is of VarBinary(Max) that is a JPEG Image
What happens is, is that by doing #2 above, at design time I can create tables and hook into my datasets and get the report all designed out the way I want. Then at runtime, I have a Stored Procedure that uses the "FOR XML AUTO" option so that I can represent my results from the database in an XML fashion which will allow me to replace the XML Schema in between the Root tags above (in #2) with my actual data (which still has the same schema). I then save the modified RDL to a database table field and move on to happily ever after......in this case, not. In this case, since an VarBinary is involved, unless I want to get a pointer back for the Diagram Column, I have to use the "FOR XML AUTO, BINARY BASE64" option. This returns an Encoded string to represent the Binary value that was in the Database....and this is the partial source of my angst....read on.
My approach that I described above worked flawlessly in all cases where an image wasn't involved. This report is the only report in the whole system I am working on that will have an image and it is the last one being done, so that's why I didn't run into this earlier.
I have tried all kinds of things at different levels, but the thing that I have tried that seemed to me to have the most potential was to use Embedded Code to take the Encoded ASCII Value and convert into something binary that the SSRS Reporting Engine likes (so my image will show), but I have been unsuccessful thus far. The error message I keep getting now from my Embedded Function is: "Invalid length for a Base-64 char array", which I have not been able to resolve thus far....and I do know that the Binary value in the database is good becuase I can see it in pages in my application otherwise.
This aside, is there anyone out there that knows how to take the value of a VarBinary(Max) field and insert it into the Text (XML) DataSet in the markup of an RDL file....and have it appear correctly when the report is rendered in something like the standard Report Viewer Control (or even when being previewed at design time inside of Visual Studio for that matter)?
Just to be clear, the root of my problem, as I see and understand it, is that I have a VarBinary value in a database that is being converted to a string (ASCII...I am presuming) due to how I am writing my stored procedure and then needs to go back to something else binary that the SSRS Engine will accept so that I can see my Image in the report when I render it.
I am wishful that someone out there understands my problem and has run into this and has a solution......but I am wishful of winning the lottery, too, and that hasn't happened yet...............
Thanks.
View 4 Replies
View Related
Mar 20, 2008
I've had some problems with Reporting Services and getting connected to the database server after configuration. I am now getting the following error message:
The report server cannot open a connection to the report server database. A connection to the database is required for all requests and processing. (rsReportServerDatabaseUnavailable) (rsRPCError)
In my Database Setup everything runs fine when I click apply except for the Setting Connection Info for Reporting Server this has a yellow triangle with a ! and says that the report server cannot access internal information.
I also have not been able to Initialize as there are no instances to initialize and none are created when I go through setup. Is there something I need to delete from the registry or the file system that does not get removed upon uninstall?
Thanks.
Emily
View 11 Replies
View Related
Sep 22, 2015
I have a requirement where we have to connect to two different data-sources one is Database Table and another one is Excel Source. I know we can do this by creating a SSIS package and loading the excel data into database table and then based on some relationship between the tables we can create the data-set in SSRS. But I am looking for some other approach where I can do this without creating the SSIS package.
View 4 Replies
View Related
Aug 12, 2015
I have a database field which consists of a long string of values with some separator.
Ex:Â Injection^!@$#Medication
in my report i have to split the string as
Injection
Medication
till here i am able to display the results but in addition to that i have to display check box against these values like below
and this string can contain any no of values ex: if we have 4 values are separated within a string then i have to display 4 check boxes against 4 results.
View 6 Replies
View Related
Apr 24, 2007
Hi,
Does anyone know of a link or list that has all the parameters for the "rs:" section of the URL access parameter, except for the ones in the Microsoft books?
Thanks,
View 1 Replies
View Related
Feb 7, 2008
We have installation of Dbase Engine and SSIS that is PRODUCTION, and want to replace with newer hardware. In "the old days", we built "boxname_new" and installed SQL with "sqlname_new", took PROD users off-line, and quickly renamed original boxes/SQL and new boxes/SQL to original name, copied data and off we went with upgrade.
NOW, the "renaming" option for SQL tools is not supported, but with re-installation.
Has anyone developed game plan steps for accomplishing hardware upgrade, including SQL environment swap with MINIMAL downtime for PRODUCTION environment? Can you share?
View 2 Replies
View Related
Sep 3, 2015
Currently we are using Custom Delivery Extension for SSRS 2008R2 We are planning to move it SSRS2012
My Question is: Whether we can use the same Code used for SSRS2008R2 to SSRS2012?
if not what code changes we should do?
View 3 Replies
View Related
Sep 12, 2007
Is it possible to write SSRS 2008 reports to run on an existing SSRS 2005 server?
If yes, what do I need to do to be able to write SSRS 2008 reports on my developer PC that will run on the SQL 2005 Server (which also has SSRS 2005 installed on it)?
I installed Visual Studio 2008 beta on the development PC and it appears that it needs SSRS installed on it too. So I installed SQL 2008 SSRS (SQL Server Reporting Services) and SQL 2008 Workstation Components onto the developer PC. Next I run the SQL 2008 "Reporting Services Configuration" tool. When I click on the "Web Service URL" section it hangs indefinitely and I have to force it closed.
The developer PC is Windows Vista Business.
Any suggestions on making this work, or any other information that you can think of that would allow me to use Visual Studio 2008 and the SQL 2008 "Report Designer Preview" tool to develop SSRS reports that will run on the SQL 2005 SSRS server?
Thanks!
-ErikR
View 4 Replies
View Related
Apr 28, 2015
Basically i have 3 images capacity per record in my asp.net application. In there i am saving the image path with record id in database and image in my application folder.
Now i am creating SSRS Report in Report builder . In there i have taken one image control to show the images. In the Image properties in report builder i have chosen database under the select the image source field. then inside use this field i have chosen image url and in use this MIME Type i have selected image/jpeg. Now i have saved this report in report server folder.
Now while calling in .net web from through report viewer control. It is opening the report but wont showing the image.
View 2 Replies
View Related
Nov 2, 2013
I'm working on a report to show financial transactions from a table over a certain period. For most transactions there is a PDF document that is stored in a separate table in a binairy format. In my report I would like to include a link on every line with transaction information in the report that opens the PDF that is linked to that transaction. Just to be clear, I don't want to embed the PDF in the report but I want the users of the report to have the option to view the PDF that is related to that transaction in their standard pdf reader (adobe).
Code to do the following:
Once a user clicks on the link to view the PDF I need the code to get the binairy data of the PDF file from the table, convert it back to a PDF and open it in the default pdf reader (for example adobe reader). If it can't directly open the file then it's maybe possible to activate the 'open or download' pop up that you also get when you download something from a website.Â
View 4 Replies
View Related
