Database Restoring Problem In Sqlserver 2005

May 2, 2008

Hello

I had created database of name ILM. after some days i renames my database in SSMSE.



by right clicking on ILM

selecting rename option

type the name CIS

Then i take backup of CIS

Problem is that

I have formated the derive where sqlserver was installed.

i only have backup file

plz tell me how i can restore database using this backup file.
i was struct plz help me soon
regards
jawad g

View 18 Replies


ADVERTISEMENT

Restoring SQLserver Database From A Backup Device

Dec 7, 2004

Hello,

Every hour I make a backup of the log files of a database to a backup device. Each backup is appended to this backup device.

Now to restore at a point in time I normally use the following script;

RESTORE DATABASE mcs_carolus
FROM disk='E:sqlserver_databasesmcs_carolus_data.bak'
WITH REPLACE,
NORECOVERY
go
RESTORE LOG MCS_CAROLUS
FROM disk='E:sqlserver_databasesmcs_carolus_log.bak'
WITH FILE = 1, NORECOVERY
GO
RESTORE LOG MCS_CAROLUS
FROM disk='E:sqlserver_databasesmcs_carolus_log.bak'
WITH FILE = 2, NORECOVERY
GO
RESTORE LOG MCS_CAROLUS
FROM disk='E:sqlserver_databasesmcs_carolus_log.bak'
WITH FILE = 3, NORECOVERY
GO
RESTORE LOG MCS_CAROLUS
FROM disk='E:sqlserver_databasesmcs_carolus_log.bak'
WITH FILE = 4, NORECOVERY
GO
RESTORE LOG MCS_CAROLUS
FROM disk='E:sqlserver_databasesmcs_carolus_log.bak'
WITH FILE = 5, NORECOVERY
GO
RESTORE LOG MCS_CAROLUS
FROM disk='E:sqlserver_databasesmcs_carolus_log.bak'
WITH FILE = 6, NORECOVERY
GO
RESTORE LOG MCS_CAROLUS
FROM disk='E:sqlserver_databasesmcs_carolus_log.bak'
WITH FILE = 7, RECOVERY,STOPAT = 'Nov 25, 2004 11:59 AM'

Is there a simpler way of restoring without going through this long process.

Regards,

Albert

View 1 Replies View Related

Trying To 'load' A Copy Of A SQLServer 2000 Database To SQLServer 2005 Express

Apr 18, 2008



I am trying to 'load' a copy of a SQLServer 2000 database to SQLServer 2005 Express (on another host). The copy was provided by someone else - it came to me as a MDF file only, no LDF file.

I have tried to Attach the database and it fails with a failure to load the LDF. Is there any way to bypass this issue without the LDF or do I have to have that?

The provider of the database says I can create a new database and just point to the MDF as the data source but I can't seem to find a way to do that? I am using SQL Server Management Studio Express.

Thanks!!

View 1 Replies View Related

Upgrade SQLServer Mobile (.sdf) Database To SQLServer 2005

Feb 9, 2006

Hello,

I have an SQLServer Mobile database, and I would like to know if there is a way to upgrade it to SQLServer 2005 (.mdf) database. My database has no records in it, just the structure (tables etc). What I am actually asking is if I can create automatically a new SQLServer 2005 Database with the same structure as my existin SQLSErver Mobile database

Thanks in advance,

TassosTS

View 1 Replies View Related

After Restoring MASTER Database, Can't Start SQLServer Service: Configuration Block Version 0 Is Not A Valid Version Number

Jul 16, 2007

Now, I checked and verified that my backup version of SQL Server is the same as the version installed on the computer I'm restoring too.



I have SQL Server on a production machine that I backed up and want to test a full restore on a dev machine to make sure it will work when I need it to.



Now that I've run the restore command on my tape backup and go to restart the SQL server service I receive:

Configuration block version 0 is not a valid version number. SQL Server is exiting. Restore the master database or reinstall.



I'm afraid I don't understand why this is happening. If the builds are the same, then shouldn't restoring the MASTER database have worked normally and I'd be able to restart the service now?



Any thoughts or suggestions?

View 4 Replies View Related

Restoring A 2005 DataBase Into A 2000 Server

Mar 12, 2007

I would like to know if it is possible to make a backup of a database in a SQL Server 2005 server and restoring it in a SQL Server 2000 server.

Thanks a lot in advanced.

View 5 Replies View Related

Restoring Database From MS SQL 2000 To SQL Express 2005

Sep 4, 2006

Hello,

I tried to restore a database which I backuped from MS SQL 2000 to SQL Express 2005 but it always failed with the following error message. What could be the problem?

Restore failed for Server 'SERVSQLEXPRESS'. (Microsoft.SqlServer.Express.Smo)

Additional information

System.Data.SqlClient.SqlError: The backup set holds a backup of a database other than the existing 'gtp' database.

(Microsoft.SqlServer.Express.Smo)

Thanks

View 23 Replies View Related

Problem When Restoring Old Version Database To Sql Server 2005

Jul 26, 2006

Dear All,

I am experiencing a problem that, after i have made a backup database file in SQL Server version (9.00.1090), when i restore the database in a newer SQL Server 2005 version(9.00.1399), an error occurs.

The error is:

Restore failed for Server 'demo'. (Microsoft.SqlServer.Smo)

Additional information:
System.Data.SqlClient.SqlError: The database was backed up on a server running version 9.00.1090. That version is incompatible with this server, which is running version 9.00.1399. Either restore the database on a server that supports the backup, or use a backup that is compatible with this server. (Microsoft.SqlServer.Smo)

Anyone can tell me how i could fix this?
Why would it happen?

Thank you very much

Regards,

George

View 1 Replies View Related

Recovery :: Restoring 2005 Database With Full Text Catalogs To 2012?

Nov 15, 2015

We are trying to restore from a backup (.bak) of a sql 2005 database with full text catologs to sql 2012.

We are getting errors saying that the backup file context are different from what we are trying to restore to, even if we try to create a new database from the backup.The new database is just a test database. The source is a production database with full cataologs.

The normal restore from a bak file does not seem to work.

We dont need the full text catalogs in the new database, but cannot change settings in the source production database.

Is there a way to take a backup of the sql 2005 database without the full text cataologs being included ? , without changing setting in the source database beforehand ?

View 2 Replies View Related

SqlServer 2005: How *best* To Copy One Database To Another

May 16, 2007

Hi;I thought I would rephrase a question I asked in another post to morequickly get to the heart of the matter. My apologies for anyone whois offended by what appears to be a repetition.My company has two identical web sites. One copy is for our customer,and one copy is for us to test our code changes on.We developed a hard to isolate bug in the copy of the web stie for ourcustomers.We believe the bug might be data related.We would like to replace our test database with our productiondatabase to try to reproduce the problem without interrupting ourservice to our customers.The test database and production database have all the same tables andstructures,but the names of the databases are slightly different.We have tried dropping tables from our test database and importingtables from our customer database in Management Studio. We got thedata but the identity fields were turned off as identities. We canmanually turn them back on in Management Studio, but we have severalhundred tables.In the end we just want to the data from our customer db to be in ourtest db with the test db name being the same, and have our identityfields preserved.What is the easiest way to do this?Thanks in advance for anyinformationSteve

View 5 Replies View Related

Restoring Database Leaves Me With (Restoring...) Message

Jan 9, 2007

I did a full backup of a db from one server(Express2005) and trying to restore it to a different instance of SQL2005 on the same development machine. (Also had some fulltext columns if that means anything)

Many failures but finally got it to report all was successful except the icon in Object Explorer shows (Restoring...) with no indication of any real activity going on. It's a tiny database with hardly any data in it.

Just not sure what the heck is going on there. It also won't let me into the database until this the (Restoring...) goes away.



Any advice on how to get this thing finished out?

View 3 Replies View Related

Restoring A SQL Server Express 2005 Database To SQL Server Standard 2005

Mar 24, 2007

Hello,If I backup and restore an express database to sql server 2005 standard, will there still be limitations in regards to the database size, cpu...etc.? Thanks,Jon 

View 1 Replies View Related

Restore (migrate) Database From MS SQLserver 2005

Nov 1, 2007

can we restore (migrate) database from MS SQLserver 2005 to MS SQLserver 2000

Pls reply.

View 2 Replies View Related

Migrating SQLServer 2000 Database To 2005

Jan 25, 2008

Hi there

I heard from someone that there is a tool that can verify/check whether the database can be deported to SQL Server 2005 native (90) or not. Is this true?

Thanks

View 1 Replies View Related

How To Start Creating DataBase Diagram In SqlServer 2005?

Feb 29, 2008

HI,
How can i start to create database diagram in Sqlserver 2005.
Please provide any URL(s).
 
Thanks and Regards,
Rafeeq

View 1 Replies View Related

AdventureWorksDW Database Download For Sqlserver 2005 - Link

Apr 24, 2008

hi friends
anyone can tell me what is the exact ink to download AdventureWorksDW database for sqlserver 2005.
have checked lots from google but unable to found exact link which is compatible with sqlserver 2005
pls help me, bit urgent
samir

View 2 Replies View Related

Restore Database From Evaluation Version Sqlserver 2005

Apr 3, 2008

Hi

I have an sqlserver 2005 Enterprise edition (Evaluation version) installed on one of my servers.It got expired after 180days and now i want to transfer the database that was residing on that Evaluation version sqlserver to a new Development server.

Do we have any way to restore the database from a already expired Sqlserver trail version to a new Development server.
I dont want make an upgrade.
Please suggest me.

Regards
Arvind

View 5 Replies View Related

Problem In Accessing The Database(Sqlserver 2005) From Client Machine

Apr 25, 2007

Hi



We have upgraded sql server 2000 to sqlserver 2005 on the development server.

To access the database server, we installed the sql server management studio on the client PC with Admin Account. The .Net framework and sqlserver management studio were installed and I am able to access the database from the client PC using Admin Login. Then we logged off and tried to login as user account on the client PC. From the user account login we are unable to open the sql server management studio. The error is as follows
€œThe proper type library could not be found in system registry€?

The client PC configuration : windows 2000 Professional ( sp4)

Regards,
K.S.Subba Rao

View 1 Replies View Related

How To Transfer Data From A SqlServer Database To A SqlServer Express Database

Mar 29, 2006

Is there a way to transfer data from a SqlServer db to a SqlServer Express db. I tried to use the backup file of SqlServer, but this file is not valid for SqlServer Express. Or there any alternatives?

thanks,

Henk

View 7 Replies View Related

Problem Unicode Data 0x2300 In SQLServer 2000 SQLServer 2005 Express

Sep 20, 2006

Hi experts;
I have a problem with unicode character 0x2300
I created this table
create table testunicode (Bez nchar(128))

Insert Data
insert into testunicode (Bez)values('Œ€„’')
with 2 Unicode characters
Œ€ = 0x2300
„’ = 0x2122

Selecting the data
select Bez from testunicode
I see
"?„’"

„’ = 0x2122 is ok but instead of 0x2300 there is 0x3f

When I modify the insert statement like that ( 8960 = 0x2300 )
insert into testunicode (Bez)values(NCHAR(8960)+'„’')

and select again voila i see
"Œ€„’"
Does anyone have an idea?

Thanks

View 1 Replies View Related

Replacing Sqlserver 2000 With Sqlserver 2005 Express

Jun 14, 2006

I have an app that uses a sqlserver 2000 jdbc driver to connect to a sqlserver 2000.

Is it possible to do a direct replacement of sqlserver 2000 with sqlserver 2005 express just by reconfiguring the app to point to the express? The app would still be using the sqlserver 2000 jdbc driver to try and make the connection.

If that is a possibility, what can be some differences in the configuration? Previously with 2000 the config information I entered is:

server name: "machinename"( or ip). I've also tried "machiname/SQLEXPRESS"

DB name: name of db instance

port: 1433(default)

user and pass.

My attempts so far results in

"java.sql.SQLException: [Microsoft][SQLServer 2000 Driver for JDBC]Error establishing socket."

and

"java.sql.SQLException: [Microsoft][SQLServer 2000 Driver for JDBC]Unable to connect. Invalid URL."

View 1 Replies View Related

Restoring Sql Server 7.0 Database Into Sql Server 2005 Express - Problem!

Feb 19, 2007

Hi!

I'm a beginner w ith SQL Express and am having some problems. I am using 2005 SP1 and installed the SQL Server Management Studio Express as well. I have a backup from a SQL Server 7.0 database that I am trying to restore into my database using the management studio. When I try to restore from the file into my database, I get the error,

System.Data.SqlClient.SqlError: The backup of the system database on the device D:GMBeta2Local.bak cannot be restored because it was created by a different version of the server (7.00.1063) than this server (9.00.3033). (Microsoft.SqlServer.Express.Smo)

Is this true? Is there any way for me to get this data into my SQL Server 2005 express on my laptop?

View 1 Replies View Related

Restoring A SQL Server 2005 Database Into SQL Server 2000

Nov 21, 2007

Hey guys
 We currenlty have SQL Server 2000 installed inhouse for testing.  A client has given us a backup of their 2005 database and i'm wondering if the restore will work into 2000, or any issues i should be aware of. Should i just install msde locally on my machine and restore the database?
 thanks

View 2 Replies View Related

SQLSERVER 2005 X64 Linked Server To SQLSERVER 7.0

Jun 20, 2007

Hello people.

I am in the process of planning a server upgrade to sql2005 x64.

I created 2 linked servers: one to a SQL2000 sp4 server and one to a SQL7.0 SP3.

I have the following error when I query the linked servers.
OLE DB provider "SQLNCLI" for linked server "IVDM2K" returned message "Unspecified error".
OLE DB provider "SQLNCLI" for linked server "IVDM2K" returned message "The stored procedure required to complete this operation could not be found on the server. Please contact your system administrator.".
Msg 7311, Level 16, State 2, Line 1
Cannot obtain the schema rowset "DBSCHEMA_TABLES_INFO" for OLE DB provider "SQLNCLI" for linked server "IVDM2K". The provider supports the interface, but returns a failure code when it is used.

I am aware of KB 906954.
http://support.microsoft.com/default.aspx?scid=kb;en-us;906954

I applied the instcat.sql on the SQL2000SP4 server and my linked server issues for that one are gone.

However, I ran the instcat.sql script on the SQL7.0 sp3 server and the linked server is still giving me an issue.

Can someone help me find a solution to this?

View 1 Replies View Related

Not Be Able To Reinstall SQLServer 2005 After SQLServer 2005 SP I

May 9, 2006

Hi every body,

I have SQLServer 2005 runs well for months and stop working after install SqlServer2005 SP1. I try to reinstall the SQLServer 2005 but I have problem when install work station component on my and the error is "There is a problem with this Windows Installer package. A program run as part of the setup did not finish as expected. Contact your support personnel or package vendor". Please help me to fix this bug. I do not want to reformat my machine.

John Dang



View 1 Replies View Related

SQL Server Admin 2014 :: Restoring A Database Even If No Database Or Backup Encryption

Sep 3, 2014

I did tried the encryption on server "A" for database "AdventureWorks2012". Then I tried to restore to server "B". There was the certificate issue, and I thought "of course : it's encrypted ! Let's deactivate it". So here I go "ALTER DATABASE AdventureWorks2012 SET ENCYRPTION OFF".I look at sys.databases : not encrypted.I backup using no encryption, I verify using msdb.dbo.backupset : not encrypted.

I move my backup to my other server where encryption was never configured (so no certificate, nothing...), and I have the error :
Msg 33111, Level 16, State 3, Line 1

Cannot find server certificate with thumbprint '0xFA130E58C999C4919B8975999C83A75A403B11D8'.
Msg 3013, Level 16, State 1, Line 1
RESTORE DATABASE is terminating abnormally.

View 6 Replies View Related

SQL Server 2014 :: Restoring Database Programmatically But Not Over Existing Live Database

Aug 6, 2015

I want to restore a database (from an encrypted .bak file) - but *not* over the live original if you take my meaning. Encryption is the standard AES-256 that comes with Sql Server 2014 btw. I don't want the original touched/altered in any way. I would like to capture a success message if possible.I can extract the physical device name of the database in question using the following code:

SELECT physical_device_name, *
FROM msdb.dbo.backupmediafamily
WHERE media_set_id =(SELECT TOP 1 media_set_id
FROM msdb.dbo.backupset
WHERE database_name='MyDatabase'
AND type='D'
ORDER BY backup_start_date DESC)

I would like if the newly restored database was rename to something different than 'MyDatabase' (as shown above) and has different logs than the original. If possible, and capture a success message when restored.

View 5 Replies View Related

Restoring In SQL 2005

Feb 8, 2006

Hi ,

I am trying to restore database , which is backed up from SQL 2005 ver 9.00.1399.06

to anothere machine have SQL 2005 ver 9.00.1399.00.



When I try to do a restore I am getting the following error!

Too many backup devices specified for backup or restore ; only 64 are allowed.

RESTORE HEADER ONLY is terminating abnormally . (Microsoft SQL Server, Error:3205)

Please give me some solution for this.

View 12 Replies View Related

Restoring A Backup Of A Subscriber Database To A New Database

Dec 1, 2006

I have a Subscriber database updated using transactional
replication and want to create a copy for development & testing. The Distribution database is running on the
same 2005 instance as the Subscriber and the Publication database on another
server running SQL Server 2005.



If I use a TSQL script to run the restore, the database is
restored to a usable state but I get the following messages:









Msg 15247, Level 16, State 1, Procedure
sp_MSrepl_check_job_access, Line 112
User does not have permission to perform this action.
The replication agent job [job name] was not removed because
it has a non-standard name; manually remove the job when it is no longer in use.
(I€™ve removed the job name from the message)
RESTORE DATABASE successfully processed 46219 pages in
935.413 seconds (0.404 MB/sec).



It looks like an attempt is being made to restore
replication information too. I note that
the RESTORE statement has a KEEP_REPLICATION options which implies (I would have
thought) that by default the replication information is not be restored.



Incidentally, before implementing replication, backing up
the live database and restoring the backup to a new database took < 7
minutes but running the same process with a Subscriber database backup takes
about 15 minutes.



I€™d be interested to know if anyone has any idea what I€™m
overlooking or doing wrong.



ThanksTim

View 7 Replies View Related

How To Upgrade From SQLServer Management Studio Express 2005 To SQL Developer 2005

May 25, 2007

I currently have SQL Server Management Studio Express 2005 and would like to upgrade my machine to SQL Developer 2005 as easily as possible. Keeping my databases and such.



Any recommendations on the best way to do this would be greatly appreciated.



thanks!

View 3 Replies View Related

Restoring Filegroups In 2005.

May 3, 2007

Howdy all. I want to be able to restore just 1 filegroup from a filegroup backup, without having to restore the log afterwords even if the data has changed post filegroup backup. While this would leave the data inconsistant, it may be desired at times. From BOL: ms-help://MS.SQLCC.v9/MS.SQLSVR.v9.en/udb9/html/2f552700-efb3-48f1-b96d-c073049100f0.htm

************************************************** ******
If the files have been modified after the file backup was created, execute the RESTORE LOG statement to apply the transaction log backup, specifying:

The name of the database to which the transaction log will be applied.
The backup device from where the transaction log backup will be restored.
The NORECOVERY clause if you have another transaction log backup to apply after the current one; otherwise, specify the RECOVERY clause.
The transaction log backups, if applied, must cover the time when the files and filegroups were backed up until the end of log (unless ALL database files are restored).
************************************************** ******

But thats just it, I may not want to take this action. Maybe some data got deleted from a set of tables in a filegroup right after I took my last filegroup backup, so I just want to restore that filegroup back to that backup, but leave my other filegroups alone. Restoring the log brings the data back to a consistant state when the log was backed up, which may not be what I want.

Can this be accomplished?

TIA, cfr

View 2 Replies View Related

Restoring A 2000 Db To 2005

Jun 20, 2007

Hello,

I'm having an issue with stored procedures after restoring a db from 2000 -> 2005.

If any stored procedures isnt owned by dbo (eg tomsqluser.updateItems rather than dbo.updateItems) then it just wont work and Studio Management Server doesnt give the permission to change it to dbo.

Is there any way around this after restoring?

View 10 Replies View Related

Restoring DB From Sql 2005 To Sql 2000

Nov 11, 2007

hi there,
I've got a problem while restoring a DB from sql server 2005 to sql server 2000 I always got an error message 3169.
Please I want if it's possible to make it, it urgent.


Thanks in advance

View 1 Replies View Related







Copyrights 2005-15 www.BigResource.com, All rights reserved