The operator for both these is set to "=", and the value is set to "=true".
Based on user selection in a report wizard, the 4th column (And/Or) may need to be changed from 'and' to 'or', or vice-versa.
Is there anyway to accomplish this programatically?
I have to create an expression that makes bold the text for some possibilities, otherwise the font will keep same, is there any staff for creating an expression like "IF ID_Name IN (x,y,z...) THEN bla-bla" like querying in SQL? Cuz I have to use multiple possibilites for same condition
I want to pull out the data to show the sum of the totals for each year the user is in. The idea is to then be able to see a comparison for year on year on a month by month basis Eg.
I am new in SQL programming world, following is query that i had created
select interfaces.nodeid as 'Node Id', nodes.caption as 'Node Name', netflowsources.Lasttime as NetflowLastTime
from interfaces inner join nodes on interfaces.nodeid = nodes.nodeid inner join netflowsources on interfaces.interfaceid = netflowsources.interfaceid
where netflowsources.LastTime NOT LIKE GETDATE()
which is from that query i get a return successfully, but i just noticed that, for column nodeid was showed me multiple duplicated records, for example
nodeid value = a,a,a,b,b,c,c,c,c,d,d,d
But what i expected was to get a return without any duplicate record within it. and i also have tried using "distinct" command, but that only impacted on "a" value, but others value not change at all.
Hello, I am looking at writing a SP without much success which enables multiple filtering on one field. Something like below: Input field: Product Description So if the user enters: "Large Drill" OR "Drill Large" the same resultset will be returned. SELECT * FROM products WHERE products.prod_desc contains both "Large" AND "Drill" I guess there'll need to be a nested Select and loop to parse the space separated input field. Any pointers would be appreciated. Thank you Lee
I want to have this query insert a bunch of XML but i get this error...
Msg 128, Level 15, State 1, Procedure InsertTimeCard, Line 117
The name "ExpenseRptID" is not permitted in this context. Valid expressions are constants, constant expressions, and (in some contexts) variables. Column names are not permitted.
Msg 128, Level 15, State 1, Procedure InsertTimeCard, Line 151
The name "DateWorked" is not permitted in this context. Valid expressions are constants, constant expressions, and (in some contexts) variables. Column names are not permitted.
What am i doing wrong...Can anyone help me out!! Thanks!!
p.s I know this query looks crazy...
Code Block
IF EXISTS (SELECT NAME FROM sysobjects WHERE NAME = 'InsertTimeCard' AND type = 'P' AND uid=(Select uid from sysusers where name=current_user)) BEGIN DROP PROCEDURE InsertTimeCard END go /********************************************************************************************************* ** PROC NAME : InsertTimeCardHoursWorked ** ** AUTHOR : Demetrius Powers ** ** TODO/ISSUES ** ------------------------------------------------------------------------------------ ** ** ** MODIFICATIONS ** ------------------------------------------------------------------------------------ ** Name Date Comment ** ------------------------------------------------------------------------------------ ** Powers 12/11/2007 -Initial Creation *********************************************************************************************************/ CREATE PROCEDURE InsertTimeCard @DateCreated DateTime, @EmployeeID int, @DateEntered DateTime, @SerializedXML text, @Result int output as declare @NewTimeCardID int select @NewTimeCardID = max(TimeCardID) from OPS_TimeCards -- proc settings SET NOCOUNT ON
-- local variables DECLARE @intDoc int DECLARE @bolOpen bit SET @bolOpen = 0 --Prepare the XML document to be loaded EXEC sp_xml_preparedocument @intDoc OUTPUT, @SerializedXML -- check for error IF @@ERROR <> 0 GOTO ErrorHandler --The document was prepared so set the boolean indicator so we know to close it if an error occurs. SET @bolOpen = 1
--Create temp variable to store values inthe XML document DECLARE @tempXMLTimeCardExpense TABLE ( TimeCardExpenseID int not null identity(1,1), TimeCardID int, ExpenseRptID int, ExpenseDate datetime, ProjectID int, ExpenseDescription nvarchar(510), ExpenseAmount money, ExpenseCodeID int, AttachedRct bit, SubmittoExpRep bit ) DECLARE @tempXMLTimeCardWorked TABLE ( TimeCardDetailID int not null identity(1,1), TimeCardID int, DateWorked DateTime, ProjectID int, WorkDescription nvarchar(510), BillableHours float, BillingRate money, WorkCodeID int, Location nvarchar(50) ) -- begin trans BEGIN TRANSACTION insert OPS_TimeCards(NewTimeCardID, DateCreated, EmployeeID, DateEntered, Paid) values (@NewTimeCardID, @DateCreated, @EmployeeID, @DateEntered, 0) -- check for error IF @@ERROR <> 0 GOTO ErrorHandler
--Now use @intDoc with XPATH style queries on the XML INSERT @tempXMLTimeCardExpense (TimeCardID, ExpenseRptID, ExpenseDate, ProjectID, ExpenseDescription, ExpenseAmount, ExpenseCodeID, AttachedRct, SubmittoExpRep) SELECT @NewTimeCardID, ExpenseRptID, ExpenseDate, ProjectID, ExpenseDescription, ExpenseAmount, ExpenseCodeID, AttachedRct, SubmittoExpRep FROM OPENXML(@intDoc, '/ArrayOfTimeCardExpense/TimeCardExpense', 2) WITH ( ExpenseRptID int 'ExpenseRptID', ExpenseDate datetime 'ExpenseDate', ProjectID int 'ProjectID', ExpenseDescription nvarchar(510) 'ExpenseDescription', ExpenseAmount money 'ExpenseAmount', ExpenseCodeID int 'ExpenseCodeID', AttachedRct bit 'AttachedRct', SubmittoExpRep bit 'SubmittoExpRep') -- check for error IF @@ERROR <> 0 GOTO ErrorHandler
-- remove XML doc from memory EXEC sp_xml_removedocument @intDoc SET @bolOpen = 0
-- commit transaction, and exit COMMIT TRANSACTION set @Result = @NewTimeCardID RETURN 0
-- Error Handler ErrorHandler: -- see if transaction is open IF @@TRANCOUNT > 0 BEGIN -- rollback tran ROLLBACK TRANSACTION END -- set failure values SET @Result = -1 RETURN -1
I'm building a report that has a column in the table called countries of origin, that column can contain data like "USA","China" ( normal countries) but some rows can also contain "USA, China, Australia" ( multiple counties in one row).
I'm trying to build a filter to filter my results :
-I have a data set created with a list of all world countries
-I've Build a Parameter containing a drop down list with all countries
--- My problem is when I want to create the filter in my main data set , I can so it , but when I search for example for "USA" , I don't get the lines where there are multiple countries and "USA" is one of them...
There must be an expression in the filter that will be able to search through all the values in the string and return me my correct results.
This provides a good example for my situation. In this example, you will see a Movie dimension with four attributes; Genre, Language, Movie, and Theme. I have a similar setup except mine is Top Level Hierarchy>Categories>Values which are all under the one hierarchy.
My Question: I have the dimension setup as a multi-value parameter in one of my reports. When I filter on a value in Genre and in Language, it provides all values from that genre and all values from that language. I really only want the values that include both.
If I filter on Western and English, I get Movie1-5 when all I really want is Movie2 only. Is there any way to have this do an Intersect within the same dimension or do I have to build each one out into its own dimension?
In a table I have some rows with flag A & B for a scode, some scode with only A and some are only B flags.
I would like to fetch all rows with flag A when both flags are present, no rows with B should be fetched. Fetch all rows when only single flags are present for a scode.How to achieve this using TSQL code.
I am new to Reporting service, Trying to create a report RS2005. I defined two dataset (query getting data from same database)
In report designer, I inserted a group and drap columns from first dataset. and inserted second group, when i dragcolumns from second dataset it shows like this
=First(Fields!GroupStatus.Value, "ParentGroup")
in my first group columns shows like =Fields!Member.Value
when i run the report i am getting one row in second group.
this looks like very basic mistake I am doing, since I don't have any experience in RS2005, i am posting this question,
I have to design a tabular report where the data in all the columns of the table comes from the cube, but for one column where the data comes from the ODS table.
Could anyone please let me know if it is possible to combine the results of the query from a cube with query from an ODS table and display together in a single report?
I usually use Access for my database work, but a recent request needs data from a table with about 8 million records - a mite outside of Access' league.
So, I am using SQL Server Report Services to create this report.
Essentially, I need to be able to use a table from database A and a table from databse B in a single dataset for the report I'm making.
I'm self-learning this package and have not been able to locate if this is even possible, let alone how to do it. I can't see it not being possible, so I figure the procedure is simply eluding me.
I've seen a thread on a similar - if not the same - problem, and the answers given all seemed to be based upon the user being able to write to the database server or in some other manner manipulate the server. I have no such capabilities. All I can do is look at the data and create a report based upon what I see. No write access at all.
This wasn't a problem in Access, because, though the main data was on the server, I linked to any needed tables and everything else was local to my box.
Hi, Is it possible to populate a dataset with tables returned by a stored proc?Consider this: BEGINSELECT * FROM Table1SELECT * FROM Table2SELECT * FROM Table3END If that is my stored proc, could I call it from a page and automatically populate a dataset with all 3 tables (if yes, then how?), or would I have to make 3 seperate calls to the db for each table? Thanks
Hi, I have a stored proc which returns multiple result sets. These results sets I am capturing using a strongly typed dataset which in turn I am using to display in the code. My dataset will have 5 tables. However when I run the code only 3 tables get populated and the remaining 2 gets no data. I have seen the problem earlier and could not resolved it. Please let me know if any one can help.
I'm looking for some advice on how to manage reports that use the same query in their datasets. I have multiple reports that use several datasets that are the same. If I need to make a change to one dataset, I need to remember to update the other datasets. Of course I don't always remember to do that!
Is there a way to create a dataset in a single location and then share it? I was thinking of using a View but I don't think it'll accept the parameters.
I've been cutting & pasting the entire query as I make change but I'm afraid it'll mess that up or forget to update a dataset.
I am trying to combine like data from two different data sources into a single data set. Is there anyway I can do this? It seems like I can only add one data set, but is there some sort of workaround I could use?
Hi, OK, trying to return the results from two SQL statements into a DataSet using SqlDataAdapter. The SELECT statements query the same table but are looking for different records based on the date that the records were inserted - the 1st query looks for records fro the current month and the 2nd one looks at the same records but for the previous month. The goal is to be able to do some math within a repeater and get the difference between the two records. Sounds easy enough and it has worked for me in different variations of the same idea but not this time - here's the code: Protected Sub buildPartsReport(ByVal varHC) objConn.Open() sSQL = "SELECT ap.id,item_model,item_sn,aircraft_id,item_loc=item_type+ ' on ' +(SELECT tnum FROM T_Aircraft WHERE id=aircraft_id),apt.tot_time As endTimes,apt.tot_cycles as endCycles FROM T_Aircraft_Parts ap, T_Aircraft_Parts_Totals apt WHERE ap.id=apt.part_id AND report_date= '" & rD & "' AND item_type LIKE 'engine%';SELECT ap.id,apt.part_id,apt.tot_time as startTimes,apt.tot_cycles as startCycles FROM T_Aircraft_Parts ap, T_Aircraft_Parts_Totals apt WHERE ap.id=apt.part_id AND report_date= '" & oldRD & "' AND item_type LIKE 'engine%'" Dim objCommand As New SqlDataAdapter(sSQL, objConn) DS = New DataSet() objCommand.Fill(DS) Repeater1.DataSource = DS Repeater1.DataBind() DS.Dispose() objCommand.Dispose() objConn.Close() End Sub Sorry if it wrapped a bit. The "rD" and "oldRD" are the variables for the date ranges (currently set to static numbers for testing). I'm getting the following error when I run this on an ASP.Net page: System.Web.HttpException: DataBinding: 'System.Data.DataRowView' does not contain a property with the name 'startTimes'. The code works fine when run via the Query Tool on the SQL server (SQL 2005 Std) though it produces two distinct "tables" which I'm guessing is the problem. I've tried variations on the code including creating a 2nd dataset and then attempting a merge (no joy) and I've tried the ".TableName" route but it complains about trying to add the tablename twice. Thoughts? I need to get this to work - it is part of a reporting component for an application that I'm developing and I'm stuck. Thanks as always...
I have a question about SQL Reporting Services. I have a stored procedure which returns multiple resultsets (multiple select). In my reporting services project I have a dataset that connects to this procedure. But, when I execute it in the Data tab, I only get the first resultset. So can't I have more resultsets? I can't use more datasets (that have the selects in the procedure) because the procedure is complicated and has many calculation. I've managed to get all the selects in only one and the reporting services in working in this way. How about many resultsets in a dataset?
I want to display the total no. of Addition, Removals and Relocations during the past 3 months in a paticular Area.
I have written the query for this.
select q.[areaname] as Area,
classCount as TotalCount, ReqType
from ( select a.areano,
a.classCount, ReqType
from ( select areano,
count(*) as classCount, reqdtls as ReqType
from WebSummit
join RequestType
on WebSummit.reqid = RequestType.reqid
where date_created >= dateadd(mm, -3, getdate())
group by areano, reqdtls
) a
join WebSummit b
on a.areano = b.areano
group by a.areano,
a.classCount, ReqType
) p
join Area q
on p.areano = q.areano
The query works fine and has been tested. Now I want to display this in chart format.
The display should be in a chart format, one for each area showing a bar for each RequestType.
I have placed "TotalCount" in the Data Fields section and ReqType in Category fields. How do I use the Filter to set an expression so that it displays the data in a seperate chart for each Area.
I tried using =Fields!Area.Value and set it to Area1 to display only Area1 values, however the preview shows nothing.
Wondering how this is handled by Multicast component. If multiple copies are created in the memory and the size of the dataset is large, this could cause some performance problems. Any thoughts? TIA
I want to design a report in which it will contain fields derived from 2 different stored procedures. I understand a 'table' can display data from a single dataset. How can i bind these two stored procedures into a single dataset so as when i click on the table and use its property 'DataSetName', to be able to select the dataset which holds all columns from stored proc 1 and stored proc 2. How can i link multible tables ( multible stored procedures with different column names in each one) into a single dataset to feed the report?
I'm looking to build a report that is basically a series of line charts that is plotting a value over time. I can accomplish this one chart/dataset at a time, but I believe with 'List's this can be achieved in a more automated fashion.If I have some data similar to this:
I want the charts grouped by the Area_ID, and then each Location_Name is a Series in that chart. So in this example, I would end up with 2 charts (Areas 1 & 2), each have 2 series (Area 1: Site1, Site2 and Area 2: Site3, Site4)Is it possible to build this with a list? or do I need to structure the data differently?
I have a MS Access database (mdb) containing the following tables:
Crime
Criminal
CrimeCommitted
Hideout
CriminalType
The Criminal table contains information about each criminal and the CrimeCommitted table contains information about the specific crimes. I've written the following query to return only the latest crime committed by each criminal:
Code Snippet
SELECT Criminal.CriminalID, Criminal.Firstname, Criminal.Lastname, Criminal.Nickname, Criminal.Gender, Criminal.DOB, Criminal.Eyes, Criminal.Complexion, Criminal.Weight, Criminal.Height, Criminal.Build, Criminal.Scars, Criminal.Occupation, Criminal.CrimeOrgID, Criminal.IQ, Criminal.Hideout, Criminal.CriminalType, Max(CrimeComitted.Date) AS Last_Crime_Comitted FROM Criminal INNER JOIN CrimeComitted ON Criminal.CriminalID=CrimeComitted.CriminalID GROUP BY Criminal.CriminalID, Criminal.Firstname, Criminal.Lastname, Criminal.Nickname, Criminal.Gender, Criminal.DOB, Criminal.Eyes, Criminal.Complexion, Criminal.Weight, Criminal.Height, Criminal.Build, Criminal.Scars, Criminal.Occupation, Criminal.CrimeOrgID, Criminal.IQ, Criminal.Hideout, Criminal.CriminalType;
This query works fine for obtaining the Criminal table data, but once i've include CrimeCommitted.Country in the SELECT statement, the data returned contained all the crimes committed by each criminal (i just need the latest crime).
The query doesn't work when another table, other than Criminal, is selected. How can i obtain the columns in the CrimeCommitted table in this query?
I have used my parameter value in where clause of my dataset control SQL query. When I choose a single value in my multiple-value parameter then I get output as expected. Hovewer when I choose multuple values I get an arror:
Only one expression can be specified in the select list when the subquery is not introduced with EXISTS. ---------------------------- Query execution failed for dataset 'DATABASE'. (rsErrorExecutingCommand) ---------------------------- An error has occurred during report processing. (rsProcessingAborted)
I am convinced that it's a syntax problem. Is there a way I can change syntax of data output from query:
select @parameter
I need output to be like: value, value, value ... etc.
The dataset control query looks something like the following:
select ID, a, b, c, d from DATASET.dbo.Table where ID in (select @parameter)
I have been searching through google for weeks to solve this and got this far and got stuck. Is it possible at all to achieve what I am looking for?
We are post-deployment with a serious reporting issue that's causing us to rethink our reporting solution. We're considering moving from what we have to SQL Server Reporting Services (client side).
I have spent the past couple of days getting up to speed on this feature and seeing if we can easily migrate it into our existing application. However, I've hit a couple of stumbling blocks and was hoping perhaps someone here could either tell me the solution or point me in the right direction.
I'm not having any problems creating basic reports (e.g. flat data).
However, I am having problems creating reports where there are related tables in a dataset.
The way it works with our existing solution is that I get a dataset (which contains several data tables) and point it to the report's datasource. That report expects those tables and I have defined table-relationships in the report which process and display the information correctly.
I'm not having as much luck with RDLC.
I can go into futher detail about how I'm creating the report, but let me just ask these general questions first: 1. Can I set a dataset containing multiple datatables equal to a property on an RDLC report and that RDLC report know how to treat and display the data? 2. Is there a better/smarter than this to get a field selection from my datasource (remember, this information is coming from a stored procedure so connecting directly to the database is not an option): a. In code, populate dataset b. In code, write dataset schema to xml (e.g. an xsd file) c. In Visual Studio, add the XSD file to project d. Use fields from XSD file to drag and drop fields on report
A fancy example would be nice too. I've googled like crazy the past couple of days and downloaded as many samples as I can find (including the ones on ftponline.com, gotreportviewer.com, "Tudor's WebLog", and several others). However, I have yet to find one that uses grouping and related datatables.
Thank you so much (if, for nothing else, reading this post )
I have a report with multiple datasets, the first of which pulls in data based on user entered parameters (sales date range and property use codes). Dataset1 pulls property id's and other sales data from a table (2014_COST) based on the user's parameters. I have set up another table (AUDITS) that I would like to use in dataset6. This table has 3 columns (Property ID's, Sales Price and Sales Date). I would like for dataset6 to pull the Property ID's that are NOT contained in the results from dataset1. In other words, I'd like the results of dataset6 to show me the property id's that are contained in the AUDITS table but which are not being pulled into dataset1. Both tables are in the same database.
I have a small number of rows in a dataset, Table 1. There is a CLOB on a large dataset, Table 2. They join on a PK. I would like to retrieve this CLOB and add it to the data flow for Table1. In short I want to emulate the following:
Table 1: Small table without CLOB, 10 rows. Table 2: Large table with CLOB, 10,000,000 rows
select CLOB from table2 where pk = (select pk from table1)
I want this to return the CLOBs for the small number of rows in Table 1. The PK is indexed obviously so it should be a fast look up.
Table 1 and Table 2 live on different Oracle databases. How do I perform this operation efficiently in SSIS? It seems the Lookup and Merge Join wont do this.
