When editing the data driven subscription query I SOMETIMES get the following error: The dataset cannot be generated. An error occurred while connecting to a data
source, or the query is not valid for the data source. (rsCannotPrepareQuery) Invalid object name '##XX'. The datasource is ok, authentication also, the query works... Why can't it see the temporary table?
Hi.
Is there a way to supress a system generated error messages?
I have a stored procedure that I'm executing from Query Analyzer that updates a table and potentially generates a foreign key violation. I am trapping and handling the error, but the system generated message still displays. Is there a way to supress these messages (other than pre-checking for the condition prior to updating)?
Thanks,
Glen Smith
I have SSIS sp2 running on a Win2003 64bit Server with 4processors and 16GB of ram. I am trying to load 1 billion rows of data into 10 tables. The source data is found in 12 different 50GB fixed width flat files stored on 2 different files servers. The destination is 10 different tables in a single SQL Server 2000 database which has 1TB of space allocated to it. I use the MS SQL OLE DB connection for each destination table.
The SSIS package is pretty straight forward. Everything takes place in 1 data flow. The 12 sources each flow through 12 different Row Count Transformations into a single Union All Transformation. From the Union All transformation the data goes into another Row Count Transformation then into a Conditional Split Tranformation. The data is split into 10 streams base on the last digit of one of the ID fields in the data. The 10 streams are fed to the 10 destination tables.
Every time I run the package (Start without Debugging) the avaible physical memory goes from around 15GB to 0 in about 2 minutes. The % comitted bytes in use goes from 5% to 100% in about 5 minutes. Once at 100% it will stay there for around 5 minutes before it will finally give me the following error message:
The system reports 98 percent memory load. There are 17178939392 bytes of physical memory with 189382656 bytes free. There are 8796092891136 bytes of virtual memory with 8742748930048 bytes free. The paging file has 54388109312 bytes with 16056320 bytes free.
This message is followed by a bunch of other messages:
SSIS Error Code DTS_E_PROCESSINPUTFAILED. The ProcessInput method on component "Union All" (2073) failed with error code 0x8007000E. The identified component returned an error from the ProcessInput method. The error is specific to the component, but the error is fatal and will cause the Data Flow task to stop running. There may be error messages posted before this with more information about the failure.
SSIS Error Code DTS_E_THREADFAILED. Thread "WorkThread1" has exited with error code 0x8007000E. There may be error messages posted before this with more information on why the thread has exited.
The attempt to add a row to the Data Flow task buffer failed with error code 0xC0047020.
SSIS Error Code DTS_E_PRIMEOUTPUTFAILED. The PrimeOutput method on component "Dr 2" (663) returned error code 0xC02020C4. The component returned a failure code when the pipeline engine called PrimeOutput(). The meaning of the failure code is defined by the component, but the error is fatal and the pipeline stopped executing. There may be error messages posted before this with more information about the failure.
The attempt to add a row to the Data Flow task buffer failed with error code 0xC0047020.
...
SSIS Error Code DTS_E_PRIMEOUTPUTFAILED. The PrimeOutput method on component "Dr 3" (898) returned error code 0xC02020C4. The component returned a failure code when the pipeline engine called PrimeOutput(). The meaning of the failure code is defined by the component, but the error is fatal and the pipeline stopped executing. There may be error messages posted before this with more information about the failure.
SSIS Error Code DTS_E_THREADFAILED. Thread "SourceThread2" has exited with error code 0xC0047038. There may be error messages posted before this with more information on why the thread has exited.
I have tried adjusting the Engine threads down from 5 to 4 to 2. I have tried adjusting the FastLoadMaxInsertCommitSize from 1000000 to 100000 to 1000 (Destinations are tablocked and Check Constraints). I have tried moving the DefaultBufferMax up to 16500 and down to 2000.
Nothing works. The package fails everytime within 20 minutes of its start.
I would prefer not to have to rewrite the package and process each file sequentially as that would take forever.
Any ideas would be greatly appreciated.
Thanks.
-Scott
I'm having the same issue in VS2012. When I edit an MDX script the error window pops open between each keystroke. I have to copy the script into notepad, edit, then return it to the MDX editor.
View 9 Replies View RelatedHi all SQL Replication experts :)
I have created my production server as a distributor and a publication on that server. On my backup server I have created a pull subscription. After that I have generated SQL scripts on my backup server so I can create the pull subscription anytime.
To test my script I used sp_removedbreplication 'dbname' to remove replication on the backup server. I then used the generated SQL script to create the pull subscription again. I got this error message
Job 'ProdServName_DBName-BackServName-DBName401A48AE-D8DC-4F29-A610-13916370CD0B' started successfully.
Server: Msg 208, Level 16, State 1, Procedure sp_addsubscription, Line 135
Invalid object name 'syspublications'.
What does this Error message mean and what can I do about it?
Grateful for all answers
Best,
/M
Hello
I tried the Beta 1 of the service pack 1 to .net 3.5. If I try to add an entity (and try to save this), I get the Exception "No support for server-generated keys and server-generated values".
How can I add entities to my Sqlce- database?
I tried to give the id- column (primary key) in the database an identity, another time without identity, only primary key --> none of them worked. I always get the same error.
What do I have to change to make successfully a SaveChanges()?
Thanks for your help,
Gerald
Hi All,
I have a field 'Rowguid' of type uniqueidentifier in a table. This field is the last field in the table. In this case if I update a record through the application I don't get any error. Suppose if there are additional fields after the field Rowguid I get the error "Multiple-Step operation cannot be generated Check each status value"
For your reference I have used the following statement to add the RowGuid field
Alter table <tablename>
Add RowGuid uniqueidentifier ROWGUIDCOL NOT NULL Default (newid())
Can anyone please help me.
Thanks
Sathesh
Some T-SQL commands can fail with multiple errors. For example, if you try to disable a primary key constraint using ALTER TABLE t1 NOCHECK CONSTRAINT PK, you will get messages like:
Msg 11415, Level 16, State 1, Line 341
Object 'PK' cannot be disabled or enabled. This action applies only to foreign key and check constraints.
Msg 4916, Level 16, State 0, Line 341
Could not enable or disable the constraint. See previous errors.
However, in the code below, only the last message is printed. How can I print all the error messages?
USE tempdb;
CREATE TABLE #t1(c1 INT CONSTRAINT PK PRIMARY KEY);
BEGIN TRY
ALTER TABLE #t1 NOCHECK CONSTRAINT PK;
PRINT 'Primary key disabled'
END TRY
BEGIN CATCH
PRINT ERROR_MESSAGE();
END CATCH
Hello,
Just yesterday I implemented SqlCacheDependencies on my ASP.NET 2.0 web site for SQL Server 2005. My SQL Server 2005 database is in mode 90, mirrored with a second database server. Now I am getting Error 17310 while running very simple statements, but only on a specific table.
We have a table called "tblSchools" which, due to negligence and incompetence, has a maximum size of over 8,000. I plan on fixing that eventually, by splitting all the long varchar(2048) fields off into other tables.
I wanted to use SqlCacheDependencies on this table, for every single column. So I created a DateTime column called LastChanged and created a trigger. I am using LastChanged as a DateTime type instead of a TimeStamp/RowVersion type because I thought it would be more useful.
Here are the changes made:
---------------------------
-- Adding the column...
ALTER TABLE tblSchools
ADD
LastChanged DateTime Null
GO
-- The program uses this stored procedure to watch the "LastChanged" column.
CREATE PROCEDURE [apCacheWatchSchool]
@SchoolID int
AS
select LastChanged from dbo.tblSchools where SchoolID = @SchoolID
GO
-- Any updates on the table cause the LastChanged column to be updated with getdate()
CREATE TRIGGER [UpdateLastChanged_TS]
ON [dbo].[tblSchools]
AFTER INSERT,UPDATE
AS
BEGIN
SET NOCOUNT ON;
update [dbo].[tblSchools]
set LastChanged = getdate()
where SchoolID in (select SchoolID from inserted);
END
GO
---------------------------
After adding this column and the trigger and s-proc, any update to any row in tblSchools fails with error 17310. It CANNOT set LastChanged to anything. It has to remain NULL. I was able to perform the following operation (as long as the tblSchools.LastChanged updating trigger [UpdateLastChanged_TS] was disabled): "update tblSchools set SchoolName = 'ZZZZ' + SchoolName where SchoolID = 185" -- so, it's not some kind of row length limit. I think it's a limit on # of columns that can be dealt with. I don't really know.
I don't know where the problem is occurring. I am just telling you why. I got around the problem (temporarily) by simply having the trigger update a DateTime column in another table, and having the SqlCacheDependency watch that column in the other table. No biggie.
As for moving some of the enormous varchar columns off of tblSchools... I don't really care enough. I guess that's why it's been like this for so long.
So, my problem is fixed, I just wanted to submit this bug report so you can at least fail gracefully in the next version of SQL Server.
I have the log/txt/mdmp files available, and can provide them upon request; they're too big for this form, sorry. Please contact me at plushpuffin AT wwddfd.com if you have any questions.
Hi,
View 5 Replies View RelatedI have been searching for a means to change the System Failure Error Check policy that comes as part of the Best Practice policies. I want to look back 24 hours. The WQL query shipped with the policy doesn't have a WHERE clause component that looks at TimeGenerated. That query looks like:
IsNull(ExecuteWql('Numeric', 'rootCIMV2', 'select EventCode from Win32_NTLogEvent where EventCode=6008 and Logfile="System"'), 0)
After searching for an example of how to do this and not finding any that are specific to PBM, I decided to fall back to a very basic approach - use wbemtest.exe to try out where clause additions and see how they work, then plug the result into the policy and see if it works. As a start, I tried the following query using wbemtest.exe:
select Event Code
from Win32_NTLogEvent
where EventCode = 6008
and Logfile = 'System'
and TimeGenerated > '20130101010000.000000–000'
This works great in wbemtest.exe. My next step was to plug this into the policy condition expression as follows: IsNull(ExecuteWql ('Numeric', 'rootCIMV2', 'select EventCode from Win32_NTLogEvent where EventCode=6008 and Logfile="System" and TimeGenerated > "20130101010000.000000–000"'), 0)
When I try to manually evaluate this policy in SSMS, I receive an "Invalid Query" error message.I assume that SWbemDateTime isn't available to use inside Policy Based Management policies. All the examples of how to handle the kind of dynamic date creation I have seen are for use in PowerShell, VBScript, or SSIS. I've played with using DateDiff, DateAdd, and GetDate inside the query string, with no success.
Why does the ExecuteWql above fail?Is it at all possible to dynamically generate a datetime (say, 24 hours ago) as part of the query string parameter of the ExecuteWql call?What might that look like?
View 1 Replies View Related
Hi,
I am using ATL COM library application. It is using sql data base for fetching the records. Some times, i get the following error. could you please let me know, why this happens? This is not reproduceble every time.
(Error! hr=80040e21, hrDesc=Multiple-step OLE DB operation generated errors. Check each OLE DB status value, if available. No work
Here is the code to connect to database which i am using.
CDataSource db;
CDBPropSet dbinit(DBPROPSET_DBINIT);
dbinit.AddProperty(DBPROP_AUTH_INTEGRATED, OLESTR("SSPI"));
dbinit.AddProperty(DBPROP_INIT_CATALOG, (const char *)bDatabase);
dbinit.AddProperty(DBPROP_INIT_DATASOURCE, (const char *)bServer);
dbinit.AddProperty(DBPROP_INIT_LCID, (long)1033);
dbinit.AddProperty(DBPROP_INIT_PROMPT, (short)4);
dbinit.AddProperty(DBPROP_INIT_TIMEOUT, (short)150);
hr = db.Open(_T("SQLOLEDB.1"), &dbinit);
if (FatalError(hr, "db.Open", buf))
{
*iErrorCode = hr;
return S_OK;
}
Any help, appreciated.
Thanks,
Satish
Hi,
I have a problem using more than one dataset to create my report. I wish to use data from one stored procedure to create the values for a combobox, that I use as input to another stored procedure.
When I create more than one dataset and set up my report parameters to use one of them to create comboboxes, I get the following error, when I want to see the preview:
An error occured during local report processing.
The definition of the report '/StockInTrade' is invalid.
The data set name is missing in the data region 'DataSetName'
------------------------------
The report worked just fine when I used hardcodede values for my combobox. The error occurs as soon as I define more than one dataset (meaning it fails even before I try to use the second dataset as report parameter values).
Does anyone know what I am doing wrong?
-- Heidi :-)
I have a gridview and a dataset. When I start my application I see the results in my gridview. When I clic on edit and chanche some value and click on update it wil give me this error:ObjectDataSource 'ObjectDataSourcePersoon' could not find a non-generic method 'Update' that has parameters: naam, tussenvoegsel, achternaam, adres, woonplaats, telefoonnummer, original_id, Original_naam, Original_tussenvoegsel, Original_achternaam, Original_adres, Original_woonplaats, Original_telefoonnummer. Does someone know whats the problem??
View 10 Replies View RelatedHi,I am unable to load data in dataset via sqlconncetion object. Always i get error at ds.fill.Thanks in advance. PLS Help.Sudipta Datta www.geocities.com/dattasudipta
View 1 Replies View RelatedHi,
I always get a "ConstraintException" error when trying, at beginning of application, to run following statement (within "Form1_Load" routine called by "this->Load" EventHandler):
"this->TauxTaxeTableAdapter->FillByPays(this->TauxTaxeDataSet->TauxTaxe,Cur_GrdView_SlPays);"
Also curiously if, while application is still running, I invoke again that same statement by means of a pushbutton clickevent, everything is running smootly without error... Looks to me that it is bugging only when running the first time...
Within Dataset, I tried to see what constraint could give me such trouble. Here is the only constraint I could find:
"this->Constraints->Add((gcnew System::Data::UniqueConstraint(L"Constraint1", gcnew cli::array< System::Data::DataColumn^ >(2) {this->columnPays, this->columnProvince_Etat}, true)));"
I then tried to find within "TauxTaxe" table if there could be any trace of records where "Pays" and "Province_Etat" columns would show any null value as well as any duplicate key values but there wasn't any...
Any place I should start to look for? BTW, I'm using a SQL Express database.
Thanks for your help,
Stéphane
Here is the detailed error log I got:
System.Data.ConstraintException: Impossible d'activer les contraintes. Une ou plusieurs lignes contiennent des valeurs qui violent les contraintes de type non null, unique ou de clé externe.
à System.Data.DataSet.FailedEnableConstraints()
à System.Data.DataSet.EnableConstraints()
à System.Data.DataSet.set_EnforceConstraints(Boolean value)
à System.Data.Common.DataAdapter.Fill(DataTable[] dataTables, IDataReader dataReader, Int32 startRecord, Int32 maxRecords)
à System.Data.Common.DbDataAdapter.FillInternal(DataSet dataset, DataTable[] datatables, Int32 startRecord, Int32 maxRecords, String srcTable, IDbCommand command, CommandBehavior behavior)
à System.Data.Common.DbDataAdapter.Fill(DataTable[] dataTables, Int32 startRecord, Int32 maxRecords, IDbCommand command, CommandBehavior behavior)
à System.Data.Common.DbDataAdapter.Fill(DataTable dataTable)
à Test_ADO.DS_TauxTaxeTableAdapters.TA_TauxTaxe.FillByPays(TauxTaxeDataTable dataTable, String Pays) dans d:projetvisual c++ 2005projets c++cli est_adods_tauxtaxe.h:ligne 1247
à Test_ADO.Form1.Sel_Pays_NewSel(Object sender, EventArgs e) dans d:projetvisual c++ 2005projets c++cli est_adoform1.h:ligne 1887
à System.Windows.Forms.RadioButton.OnCheckedChanged(EventArgs e)
à System.Windows.Forms.RadioButton.set_Checked(Boolean value)
à Test_ADO.Form1.Init_Form1() dans d:projetvisual c++ 2005projets c++cli est_adoform1.h:ligne 1480
à Test_ADO.Form1.Form1_Load(Object sender, EventArgs e) dans d:projetvisual c++ 2005projets c++cli est_adoform1.h:ligne 1446
à System.Windows.Forms.Form.OnLoad(EventArgs e)
à System.Windows.Forms.Form.OnCreateControl()
à System.Windows.Forms.Control.CreateControl(Boolean fIgnoreVisible)
à System.Windows.Forms.Control.CreateControl()
à System.Windows.Forms.Control.WmShowWindow(Message& m)
à System.Windows.Forms.Control.WndProc(Message& m)
à System.Windows.Forms.ScrollableControl.WndProc(Message& m)
à System.Windows.Forms.ContainerControl.WndProc(Message& m)
à System.Windows.Forms.Form.WmShowWindow(Message& m)
à System.Windows.Forms.Form.WndProc(Message& m)
à System.Windows.Forms.Control.ControlNativeWindow.OnMessage(Message& m)
à System.Windows.Forms.Control.ControlNativeWindow.WndProc(Message& m)
à System.Windows.Forms.NativeWindow.Callback(IntPtr hWnd, Int32 msg, IntPtr wparam, IntPtr lparam)
Finally, SQL Statement for "TA_TauxTaxe::FillByPays" is the following:
SELECT Pays, Province_Etat, Taxe1_Appl, Taxe1_Dsc, Taxe1_Taux, Taxe2_Appl, Taxe2_Dsc, Taxe2_Taux
FROM TauxTaxe
WHERE (Pays = @Pays)
In debug mode, I double-checked and could verify that @Pays didn't have any null value but a valid string value at time "Fill" routine was invoked. Any clue?
I have a report with multiple datasets, the first of which pulls in data based on user entered parameters (sales date range and property use codes). Dataset1 pulls property id's and other sales data from a table (2014_COST) based on the user's parameters. I have set up another table (AUDITS) that I would like to use in dataset6. This table has 3 columns (Property ID's, Sales Price and Sales Date). I would like for dataset6 to pull the Property ID's that are NOT contained in the results from dataset1. In other words, I'd like the results of dataset6 to show me the property id's that are contained in the AUDITS table but which are not being pulled into dataset1. Both tables are in the same database.
View 0 Replies View RelatedI have a small number of rows in a dataset, Table 1. There is a CLOB on a large dataset, Table 2. They join on a PK. I would like to retrieve this CLOB and add it to the data flow for Table1. In short I want to emulate the following:
Table 1:Â Small table without CLOB, 10 rows.Â
Table 2: Large table with CLOB, 10,000,000 rows
select CLOB
from table2
where pk = (select pk from table1)
I want this to return the CLOBs for the small number of rows in Table 1. The PK is indexed obviously so it should be a fast look up.
Table 1 and Table 2 live on different Oracle databases. How do I perform this operation efficiently in SSIS? It seems the Lookup and Merge Join wont do this.
I have a report with multiple datasets, the first of which pulls in data based on user entered parameters (sales date range and property use codes). Dataset1 pulls property id's and other sales data from a table (2014_COST) based on the user's parameters.
I have set up another table (AUDITS) that I would like to use in dataset6. This table has 3 columns (Property ID's, Sales Price and Sales Date). I would like for dataset6 to pull the Property ID's that are NOT contained in the results from dataset1. In other words, I'd like the results of dataset6 to show me the property id's that are contained in the AUDITS table but which are not being pulled into dataset1. Both tables are in the same database.
Hello,I'm using a typed dataset to access my database (SQL Express); I have a table that returns data, which two fields are null; I'm getting this error:{"Failed to enable constraints. One or more rows contain values violating non-null, unique, or foreign-key constraints."}There are no foreign-key or unique key constraints, so it has to be a non-null issue; I changed the two fields in the table to have a null value of Empty instead of Throw Exception, but I don't understand what the problem is coming from... I'm at a loss.Thanks.
View 2 Replies View RelatedI've just recently tried to upload a report to my organisations local SharePoint site (2010)...it has reporting servers functionality and works fine otherwise. I have site ownership but have no control over the SharePoint Farm etc.
The trouble i've ran into is that the new report i've created is being pulled from a third party company's own server, with the shared dataset on their reporting server...it works fine when i run it on my computer or on their software system but it needs to be on the SharePoint site as well. For some bizzare reason it's against their policy to connect direcrtly to the database meaning i can't just create a data-source to sort this mess out.
The report server cannot process the report. The reference for the shared dataset 'DischargePerformancefull' is not valid. (rsInvalidDataSetReference)Â
I've tried uploading the dataset into the same sharepoint library as the report but it just comes up with XML errors when i try to open it and it won't let me point the dataset to it from the SharePoint options.
Hi,
I've a dataset which is filled using a stored procedure in either MSSQL2005 or 2000.
The procedure may return sql-errors (f.ex 208 if a table is not found), but the procedure will anyway return data which shall populate the dataset, independent on 208 errors.
The procedure works fine if running it from f.ex. SqlMgtStudio, and the dataset is filled if the procedure triggers no errors.
However, if the procedure triggers an error like 208, then I get an exception in the application and the dataset is not populated with the data returned by the procedure.
Is there a way of telling the DataSet/SqlDataAdapter to fill the dataset even if the sql-code genererates som errors?
Regards, Guttorm
All,
I'm getting a strange error in SSRS when there is no data returned from a OLEDB datasource.
Here are the steps to simulate the error
1. Create 2 shared datasources to the Adventure Database - one using ADO MD provider (Microsoft SQL Server Analysis Services (AdomdClient)) and another using OLEDB (OLEDB 9.0 for Analysis Services)
2. Create a new report and create a dataset with the ADO-MD provider and copy and paste the below query. (This query will not return any data)
SELECT NON EMPTY [Measures].[End of Day Rate] ON 0 ,NON EMPTY {[Date].[Date].&[10000]} ON 1 FROM [Adventure Works]
3. Run report. It will be blank as nothing is defined in the layout. But this shows that the query is executed in the dataset and is succesfull although the query does not return any data.
4. Create another report and create a dataset with the OLE-DB provider and copy paste the above query.
5. Run the report. It will come back with error in the lines of "Object reference not set to an instance of an object". The reporting services log file will show that the query execution has failed although this is not the case when analysed from profiler.
Any ideas on how to solve this? What I'm trying to acheive is to use the NoRows property of table to display a message when there is no data. But I'm not able to pass the above hurdle when no data is returned from the dataset.
Thanks in advance.
Arun.
An error has occurred during report processing.
Cannot set the command text for data set 'ScoreboardOLAP'.
Error during processing of the CommandText expression of dataset €˜ScoreboardOLAP€™
Can anyone help at all here? I've seen about 10 articles on this one but none appear to be relevant. I have a complex report comprising many sub-reports which runs successfully in a development environment. When deployed to an environment which comprises a separate report sever and report server DB I get the above error even when I try and browse to any of the sub-reports.
The sub-report is using an OLEDB connection to an SSAS DB and its command text is set as:-
=Code.GetQueryString(parameters)
Where GetQueryString is a function in the code section of the report which returns some MDX based on the supplied parameters. I obviously know the function works because it works in development mode.
I have tried to determine what is going on from the logs but the only messages I get are those above. I've set the data sources on the server up to use valid Windows Credentials stored on the server so I don't believe the issue is one of authentication
Any thoughts or tips in helping to diagnose the cause of the problem would be greatly appreciated.
Hi, when I try to open up an existing report project in VS 2005 then open the report template it will guide me to the Layout tab. Once I change the tab to Data, the following error showed up with an OK button:
TITLE: Microsoft Report Designer
------------------------------
The data extension SQL was not found in the configuration file RSReportDesigner.config.
Add the extension to the configuration file before proceeding or choose another data extension.
------------------------------
I tried creating a new dataset on the Data tab, the "Command Type" section use to have 2 selection: Text and Storeprocedure type. But now the Storeprocedure type is missing. I tried uninstall VS 2005 & SQL Server 2005 Components and reinstall them the same error still occurs.
I have no idea how to solve it, anyone encounter the same problem or able to help out please do so. Thanks in advance.
From,
Daren
I found out the data I need for my SQL Report is already defined in a dynamic dataset on another web service. Is there a way to use web services to call another web service to get the dataset I need to generate a report? Examples would help if you have any, thanks for looking
View 2 Replies View Relatedstring fileName = "d:\shiporder.xml";
DataSet dataSet = new DataSet();
dataSet.ReadXML(fileName);
//connection string
string cmd = "INSERT INTO Orders (OrderID, OrderPerson) VALUES (dataSet.Tables[0].Row[0][0].ToString(),dataSet.Tables[0].Row[0][1].ToString);
SqlConnection con = new SqlConnection(conection string);
SqlCommand mycmd = new SqlCommand(cmd,con);
con.Open();
mycmd.ExecuteNonQuery();
con.Close();
it gives me this error
dataSet.Tables its not permitted in this context. valid expression are constants, constant expression, . Columns name are not permitted
Hi all
I have a procedure where I am inserting some elements into #Table and then finally get the datset I need.
Now when I am using this procedure as dataset to my report, it throws up the following error:
Invalid object Name "#TEMP2".
The data that I retrieve is similar to the data that I get from this query in the post by Manivannan.D.Sekaran
http://forums.microsoft.com/MSDN/ShowPost.aspx?PostID=1871478&SiteID=1
Is it because my columns are generated on the fly that I am not able to retrieve the column headers appropriately. If so can someone suggest a way over to this?
I am not sure should I posting it here or in T-SQL Forum.
Is there any way to display this information in the report?
Thanks
Hi,
I have a stored procedure attached below. It returns 2 rows in the SQL Management studio when I execute MyStorProc 0,28. But in my program which uses ADOHelper, it returns a dataset with tables.count=0.
if I comment out the line --If @Status = 0 then it returns the rows. Obviously it does not stop in
if @Status=0 even if I pass @status=0. What am I doing wrong?
Any help is appreciated.
ALTER PROCEDURE [dbo].[MyStorProc]
(
@Status smallint,
@RowCount int = NULL,
@FacilityId numeric(10,0) = NULL,
@QueueID numeric (10,0)= NULL,
@VendorId numeric(10, 0) = NULL
)
AS
SET NOCOUNT ON
SET CONCAT_NULL_YIELDS_NULL OFF
If @Status = 0
BEGIN
SELECT ......
END
If @Status = 1
BEGIN
SELECT......
END
When  I click on the DataSet Query Desginer there is an Error Source:.NetSqlClient Data Provider. why this error comes and I have executed the SQL query in SSMS succesfully and the result comes. However this is causing the report from the report manager to fail.
View 8 Replies View Relatedi have two datasets.one dataset have old data from some other database.second dataset have original data from sql server 2005 database.both database have same field having id as a primary key.i want to transfer all the data from first dataset to new dataset retaining the previous data but if old dataset have the same id(primary key) as in the new one then that row will not transfer.
but if the id(primary key) have changed values then the fields updated with that data.how can i do that.