I am new to SSRS 2005 but find it to be a wonderful development tool. I discovered that when you run a report where the dataset returns no records the resulting report is blank as opposed to page header, table header, no data, and page footer. Is there a way to force these items to be displayed even when the dataset is empty? Or better yet is there a way to return a (custom) empty dataset message in place of the report body?
Thanks.
Hi,
I have a little question. I searched google, and could not find good answer for this one.
I have a stored procedure that returns two tables. Usually I generate a dataset out of a stored procedure by dragging it to the dataset.
When I drag this one it creates a DS with only one table, the first one. How can I make it use both tables?
Thank you.
I have an sp (attached below) that returns records as desired when run in the query analyzer, but when run from within my adp I get only a "the sp ran successfully but did not return any records" message box. I would like to use it as a record source for a report, and when I try to do that I get a message box saying that the "Provider command for child rowset does not produce a rowset".
To repeat, the sp runs fine in QA, just not in access.
Any thoughts, anybody? Many thanks. David
Alter Procedure spDailyMicroLabel
@Date Datetime = null
AS
IF @Date IS NULL
BEGIN
SET @Date=getdate()
SELECT FERMID, fldfermtank AS "Tank", CONVERT(varchar(12), fldfilltime, 101) AS "Filled",
fldfermprod AS "Brand", CONVERT(varchar(15),fldfilltime, 108) AS "FillTime", CONVERT(varchar(12), @Date, 101) as "ReportDate",
fldfermidold AS "FermenterCode",
CAST(CAST(CONVERT(char(8),GETDATE(),112) AS datetime) - flddtferfil AS int) AS "FillDay",
"Sample Test" = CASE
WHEN CAST(CAST(CONVERT(char(8),GETDATE(),112) AS datetime) - flddtferfil AS int)=1
THEN 'HLP/UBA'
WHEN CAST(CAST(CONVERT(char(8),GETDATE(),112) AS datetime) - flddtferfil AS int) = 3 THEN 'XTF'
WHEN CAST(CAST(CONVERT(char(8),GETDATE(),112) AS datetime) - flddtferfil AS int) = 4 THEN 'HLP, TF'
WHEN CAST(CAST(CONVERT(char(8),GETDATE(),112) AS datetime) - flddtferfil AS int) = 6 THEN 'TA'
WHEN CAST(CAST(CONVERT(char(8),GETDATE(),112) AS datetime) - flddtferfil AS int) = 7 THEN 'HLP/UBA, BU/Color'
WHEN CAST(CAST(CONVERT(char(8),GETDATE(),112) AS datetime) - flddtferfil AS int) = 10 THEN 'HLP'
WHEN CAST(CAST(CONVERT(char(8),GETDATE(),112) AS datetime) - flddtferfil AS int) = 13 THEN 'HLP/UBA'
WHEN CAST(CAST(CONVERT(char(8),GETDATE(),112) AS datetime) - flddtferfil AS int) = 16 THEN 'HLP'
WHEN CAST(CAST(CONVERT(char(8),GETDATE(),112) AS datetime) - flddtferfil AS int) = 19 THEN 'HLP/UBA'
WHEN CAST(CAST(CONVERT(char(8),GETDATE(),112) AS datetime) - flddtferfil AS int) = 90 THEN 'HLP/UBA'
WHEN CAST(CAST(CONVERT(char(8),GETDATE(),112) AS datetime) - flddtferfil AS int) = 91 THEN 'HLP/UBA'
WHEN CAST(CAST(CONVERT(char(8),GETDATE(),112) AS datetime) - flddtferfil AS int) = 92 THEN 'HLP/UBA'
WHEN CAST(CAST(CONVERT(char(8),GETDATE(),112) AS datetime) - flddtferfil AS int) = 93 THEN 'HLP/UBA'
WHEN CAST(CAST(CONVERT(char(8),GETDATE(),112) AS datetime) - flddtferfil AS int) = 94 THEN 'HLP/UBA'
WHEN CAST(CAST(CONVERT(char(8),GETDATE(),112) AS datetime) - flddtferfil AS int) = 95 THEN 'HLP/UBA'
WHEN CAST(CAST(CONVERT(char(8),GETDATE(),112) AS datetime) - flddtferfil AS int) = 96 THEN 'HLP/UBA'
ELSE 'No Test Micro'
END
INTO #tblTempA
FROM vwUnfilteredFermenters
SELECT #tblTempA.FermenterCode AS "Fermenter ID", #tblTempA.Filled AS "Fill Date", #tblTempA.FillDay,
tblMicroTestDays.Test, tblMicroTestDays.HLPResults AS "HLP Results", tblMicroTestDays.UBAResults AS "UBA Results"
FROM tblMicroTestDays RIGHT JOIN #tblTempA ON tblMicroTestDays.TestDay = #tblTempA.FillDay
END
SQL Server 7.0If I run the following in Query Analyzer I get no records returned:exec GetLeadsOutcome_Dealer '1/1/2003','12/2/2003',10, '176, 183'If, however, I run either :exec GetLeadsOutcome_Dealer '1/1/2003','12/2/2003',10, '176'orexec GetLeadsOutcome_Dealer '1/1/2003','12/2/2003',10, '183'I get a single record returned in each case (which is what I wouldexpect).The SQL for GetLeadsOutcome_Dealer is:CREATE PROCEDURE GetLeadsOutcome_Dealer@FromDate smalldatetime,@ToDate smalldatetime,@OutcomeTypeID integer,@DealerCode varchar(8000)ASDECLARE @TotalLeads integerBEGINSELECT @TotalLeads=COUNT(fldLeadID) FROM tblLeads WHERE(tblLeads.fldDealerID IS NOT NULL)SELECT DISTINCT (dbo.tblDealers.fldDealerName),COUNT(dbo.tblLeads.fldLeadID) as LeadCount,@TotalLeads AS TotalLeadsFROM tblLeads LEFT OUTER JOINtblOutcome ON tblLeads.fldOutcomeID =tblOutcome.fldOutcomeID RIGHT OUTER JOINtblDealers RIGHT OUTER JOINtblRegion ON tblDealers.fldRegionID =tblRegion.fldRegionID ON tblLeads.fldDealerID = tblDealers.fldDealerIDWHERE (((dbo.tblLeads.fldEntered) BETWEEN @FromDate And @ToDate)) ANDtblOutcome.fldOutcomeID=@OutcomeTypeID AND(dbo.tblDealers.fldDealerCode in (@DealerCode))GROUP BY dbo.tblDealers.fldDealerNameORDER BY dbo.tblDealers.fldDealerNameENDGOHowever, if I open EM, open a table in query view, and paste this intothe SQL window,SELECT DISTINCT tblDealers.fldDealerName, COUNT(tblLeads.fldLeadID) ASLeadCountFROM tblLeads LEFT OUTER JOINtblOutcome ON tblLeads.fldOutcomeID =tblOutcome.fldOutcomeID RIGHT OUTER JOINtblDealers RIGHT OUTER JOINtblRegion ON tblDealers.fldRegionID =tblRegion.fldRegionID ON tblLeads.fldDealerID = tblDealers.fldDealerIDWHERE (tblLeads.fldEntered BETWEEN '1/1/2003' AND '12/2/2003') AND(tblOutcome.fldOutcomeID = 10) AND (tblDealers.fldDealerCode IN (176,183))GROUP BY tblDealers.fldDealerNameORDER BY tblDealers.fldDealerNameI get two records returned.What is happening?TIAEdwardTABLE DEFS:if exists (select * from dbo.sysobjects where id =object_id(N'[dbo].[FK_tblLeads_tblDealers]') and OBJECTPROPERTY(id,N'IsForeignKey') = 1)ALTER TABLE [dbo].[tblLeads] DROP CONSTRAINT FK_tblLeads_tblDealersGOif exists (select * from dbo.sysobjects where id =object_id(N'[dbo].[FK_tblSystemUsers_tblDealers]') andOBJECTPROPERTY(id, N'IsForeignKey') = 1)ALTER TABLE [dbo].[tblSystemUsers] DROP CONSTRAINTFK_tblSystemUsers_tblDealersGOif exists (select * from dbo.sysobjects where id =object_id(N'[dbo].[FK_tblLeadNotes_tblLeads]') and OBJECTPROPERTY(id,N'IsForeignKey') = 1)ALTER TABLE [dbo].[tblLeadNotes] DROP CONSTRAINTFK_tblLeadNotes_tblLeadsGOif exists (select * from dbo.sysobjects where id =object_id(N'[dbo].[FK_tblDealers_tblRegion]') and OBJECTPROPERTY(id,N'IsForeignKey') = 1)ALTER TABLE [dbo].[tblDealers] DROP CONSTRAINT FK_tblDealers_tblRegionGOif exists (select * from dbo.sysobjects where id =object_id(N'[dbo].[tblDealers]') and OBJECTPROPERTY(id,N'IsUserTable') = 1)drop table [dbo].[tblDealers]GOif exists (select * from dbo.sysobjects where id =object_id(N'[dbo].[tblLeads]') and OBJECTPROPERTY(id, N'IsUserTable')= 1)drop table [dbo].[tblLeads]GOif exists (select * from dbo.sysobjects where id =object_id(N'[dbo].[tblOutcome]') and OBJECTPROPERTY(id,N'IsUserTable') = 1)drop table [dbo].[tblOutcome]GOif exists (select * from dbo.sysobjects where id =object_id(N'[dbo].[tblRegion]') and OBJECTPROPERTY(id, N'IsUserTable')= 1)drop table [dbo].[tblRegion]GOCREATE TABLE [dbo].[tblDealers] ([fldDealerID] [int] IDENTITY (1, 1) NOT NULL ,[fldDealerCode] [varchar] (50) NOT NULL ,[fldDealerName] [varchar] (50) NULL ,[fldDealerTel] [varchar] (20) NULL ,[fldDealerEmail] [varchar] (100) NULL ,[fldDealerContact] [varchar] (50) NULL ,[fldRegionID] [int] NULL ,[fldDealerActive] [smallint] NOT NULL ,[fldHeadOffice] [smallint] NULL) ON [PRIMARY]GOCREATE TABLE [dbo].[tblLeads] ([fldLeadID] [int] IDENTITY (1, 1) NOT NULL ,[fldAccountNo] [varchar] (50) NULL ,[fldDealerID] [int] NULL ,[fldStatusID] [int] NOT NULL ,[fldOutcomeID] [int] NOT NULL ,[fldContacted] [smallint] NOT NULL ,[fldDateContacted] [smalldatetime] NULL ,[fldAppointment] [smallint] NULL ,[fldShowRoom] [smallint] NOT NULL ,[fldTestDrive] [smallint] NOT NULL ,[fldSalesPersonID] [int] NULL ,[fldCustomerName] [varchar] (50) NULL ,[fldCHouseNo] [varchar] (50) NULL ,[fldCStreet] [varchar] (50) NULL ,[fldCDistrict] [varchar] (50) NULL ,[fldCTown] [varchar] (40) NULL ,[fldCCounty] [varchar] (50) NULL ,[fldCPostcode] [varchar] (50) NULL ,[fldPhoneInd] [varchar] (20) NULL ,[fldCTel] [varchar] (50) NULL ,[fldNewBusinessDate] [smalldatetime] NULL ,[fldAgreementType] [varchar] (50) NULL ,[fldCashPrice] [smallmoney] NULL ,[fldBalanceFin] [smallmoney] NULL ,[fldCustRate] [varchar] (10) NULL ,[fldOrigTerm] [int] NULL ,[fldPPPType] [varchar] (10) NULL ,[fldBalloonValue] [smallmoney] NULL ,[fldMonthlyInstal] [smallmoney] NULL ,[fldRegNo] [varchar] (10) NULL ,[fldRegDate] [smalldatetime] NULL ,[fldModel] [varchar] (50) NULL ,[fldDescription] [varchar] (50) NULL ,[fldTheoPIFDate] [smalldatetime] NULL ,[fldMonthsToGo] [int] NULL ,[fldBalanceOS] [smallmoney] NULL ,[fldLeadPrinted] [smallint] NULL ,[fldMergeFile] [varchar] (255) NULL ,[fldTPS] [varchar] (10) NULL ,[fldMPS] [varchar] (10) NULL ,[fldUpdated] [smalldatetime] NULL ,[fldUpdatedBy] [int] NULL ,[fldEntered] [smalldatetime] NULL ,[fldReasonLeadNotProgressed] [varchar] (5000) NULL) ON [PRIMARY]GOCREATE TABLE [dbo].[tblOutcome] ([fldOutcomeID] [int] IDENTITY (1, 1) NOT NULL ,[fldOutcomeCode] [int] NULL ,[fldOutcome] [varchar] (100) NULL ,[fldConvertedSales] [smallint] NULL) ON [PRIMARY]GOCREATE TABLE [dbo].[tblRegion] ([fldRegionID] [int] IDENTITY (1, 1) NOT NULL ,[fldRegionCode] [varchar] (10) NULL ,[fldRegion] [varchar] (50) NULL) ON [PRIMARY]GOALTER TABLE [dbo].[tblDealers] WITH NOCHECK ADDCONSTRAINT [PK_tblDealers] PRIMARY KEY CLUSTERED([fldDealerID]) WITH FILLFACTOR = 90 ON [PRIMARY]GOALTER TABLE [dbo].[tblLeads] WITH NOCHECK ADDCONSTRAINT [PK_tblLeads] PRIMARY KEY CLUSTERED([fldLeadID]) WITH FILLFACTOR = 90 ON [PRIMARY]GOALTER TABLE [dbo].[tblOutcome] WITH NOCHECK ADDCONSTRAINT [PK_tblOutcome] PRIMARY KEY CLUSTERED([fldOutcomeID]) WITH FILLFACTOR = 90 ON [PRIMARY]GOALTER TABLE [dbo].[tblRegion] WITH NOCHECK ADDCONSTRAINT [PK_tblArea] PRIMARY KEY CLUSTERED([fldRegionID]) WITH FILLFACTOR = 90 ON [PRIMARY]GOALTER TABLE [dbo].[tblDealers] WITH NOCHECK ADDCONSTRAINT [DF_tblDealers_fldActive] DEFAULT ((-1)) FOR[fldDealerActive],CONSTRAINT [DF_tblDealers_fldHeadOffice] DEFAULT (0) FOR[fldHeadOffice],CONSTRAINT [IX_tblDealers] UNIQUE NONCLUSTERED([fldDealerCode]) ON [PRIMARY]GOALTER TABLE [dbo].[tblLeads] WITH NOCHECK ADDCONSTRAINT [DF_tblLeads_fldOutcomeID] DEFAULT (10) FOR[fldOutcomeID],CONSTRAINT [DF_tblLeads_fldContacted] DEFAULT (0) FOR [fldContacted],CONSTRAINT [DF_tblLeads_fldAppointment] DEFAULT (0) FOR[fldAppointment],CONSTRAINT [DF_tblLeads_fldShowRoom] DEFAULT (0) FOR [fldShowRoom],CONSTRAINT [DF_tblLeads_fldTestDrive] DEFAULT (0) FOR [fldTestDrive],CONSTRAINT [DF_tblLeads_fldLeadPrinted] DEFAULT (0) FOR[fldLeadPrinted],CONSTRAINT [DF_tblLeads_fldTPSMatch] DEFAULT ('NO') FOR [fldTPS],CONSTRAINT [DF_tblLeads_fldMPSMatch] DEFAULT ('NO') FOR [fldMPS]GOALTER TABLE [dbo].[tblOutcome] WITH NOCHECK ADDCONSTRAINT [DF_tblOutcome_fldConvertedSales] DEFAULT (0) FOR[fldConvertedSales]GOALTER TABLE [dbo].[tblRegion] WITH NOCHECK ADDCONSTRAINT [IX_tblRegion] UNIQUE NONCLUSTERED([fldRegionCode]) ON [PRIMARY]GOALTER TABLE [dbo].[tblDealers] ADDCONSTRAINT [FK_tblDealers_tblRegion] FOREIGN KEY([fldRegionID]) REFERENCES [dbo].[tblRegion] ([fldRegionID])GOALTER TABLE [dbo].[tblLeads] ADDCONSTRAINT [FK_tblLeads_tblDealers] FOREIGN KEY([fldDealerID]) REFERENCES [dbo].[tblDealers] ([fldDealerID])GOalter table [dbo].[tblLeads] nocheck constraint[FK_tblLeads_tblDealers]GO
View 2 Replies View RelatedI have my SQL call:
SELECT CallLog.CallID, Journal.HEATSeqFROM CallLog INNER JOIN Journal ON CallLog.CallID = Journal.CallID
There are multiple enteries in the Journal table for every entry in the CallLog table, so I receive multiple records:
CallID HEATSeq00000164 983290904 00000164 983291548 00000164 983295209 00000231 984818271 00000231 985194317 00000231 985280248
I only want to return the LAST record in the Journal table, so the output will be:
CallID HEATSeq00000164 983295209 00000231 985280248
Can this be done directly in the SQL call?
I am having a query
select INVOICE.TarrifHeadNumber, SUM(INVOICEITEMS.ItemQuantity) From invoiceitems,
invoice Where invoice.invoicenumber = invoiceitems.invoicenumber and
month(InvoiceDate)='11' and year(InvoiceDate)= '2012'
group by INVOICE.TarrifHeadNumber
tarrifheadno SUM(INVOICEITEMS.ItemQuantity)
84195030 9.00
84198910 5.00
84212190 223.00
84569090 247.00
84799040 1138.00
8481-80-1030 137.00
85433000 6177.20
tarrifheadno is unique
Now if i use below query and add invoicetypecode field
select INVOICE.TarrifHeadNumber,CETSH.GoodsDescription, SUM(INVOICEITEMS.ItemQuantity),INVOICE.invoicetype code From invoiceitems,
invoice , cetsh Where invoice.invoicenumber = invoiceitems.invoicenumber and
month(InvoiceDate)='11' and year(InvoiceDate)= '2012' and
cast(CETSH.CETSHNumber as varchar) = INVOICE.TarrifHeadNumber group by INVOICE.TarrifHeadNumber,CETSH.GoodsDescription,in voicetypecode
This query return distinct of 11 records
84195030 84195030
9.00 1
84198910 84198910
5.00 2
84212190 84212190
157.00 1
84212190 84212190
42.00 2
84212190 84212190
24.00 3
84569090 84569090
189.00 1
84569090 84569090
58.00 2
84799040 84799040
166.00 1
84799040 84799040
972.00 2
85433000 85433000
3764.00 1
85433000 85433000
2413.20 2
How to get same 7 records
I have a SP that manipulates data for picking products and puts them into a temp table "#PickList" which is used for the basis of printing a picking note report.
I have also added code at the end of the SP to take the "#PickList" data and insert into a permanent table called "BWT_Lift_Transaction" and then use the bcp command to query it out to a text file. All this works fine, until the bcp command runs. Although the records are in the table, bcp returns nothing. Here is the code:
DECLARE @strLocation VARCHAR(50)
DECLARE @TransNum VARCHAR(50)
DECLARE @strFileLocation VARCHAR(1000)
DECLARE @strFileName VARCHAR(1000)
DECLARE @bcpCommand VARCHAR(8000)
[code].....
The earlier parts of the code create the filename for the text file and location to store it. If I insert a SELECT on the dbo.BWT_Lift_Transaction directly after the insert, I can see the data in there, but although the bcp command creates the file correctly, it returns no data:
output
NULL
Starting copy...
NULL
0 rows copied.
Network packet size (bytes): 4096
Clock Time (ms.) Total : 1
NULL
If I remove the delete statement at the end and run the code twice, it will insert the data into the table twice. On the first run, nothing is returned by bcp. On the second run, the first set is returned by bcp, not both sets.
I don't understand why this is, but I guess it's something to do with transaction commitment and the way bcp works.
Hi,
I need to know whether a stored procedure returns only a single record or it can return more than one if the query if for example to return all records in a specific date range.
Thanks.
I am creating a simple SSRS table report through Report Builder. My dataset is looking for the stored procedure . When I execute the Stored procedure through SSMS I get resutset for certain parameters. I execute the dataset (Store procedure) through query designer in dataset properties and I get results back. But when I try to run the report and see the preview, I do not get any results displayed. I been looking on the same issue form last 3-4 days and have not found any clue.
Following is the stored procedure I am using. Also I am passing multivalued parameter through report as well, and I am using spilt function to seperate the libraryid I am reading from parameter values. This works fine. I have similar kind of four other reports and with different stored procedure which exactly follow the same method , like multivalue parameters and other criteria are also very similar. All other reports works just fine.. This perticular report has issue for displying results, following is the stored procedure I am using
SET ANSI_NULLS ON
GO
SET QUOTED_IDENTIFIER ON
GO
[code]....
Hi all I am having some issues in selecting items from my database where the record is NOT NULL. I have the code below however although some fields do contain soem data in it, others are blank which I believe are empty spaces. How do I do a SELECT command which ignores empty spaces and NULLS?
Code Snippet
SELECT CustomSearch FROM OfficesTable WHERE CustomSearch IS NOT NULL
Thanks, Onam.
I have a query that will return one record as its results if you provide two variables: @login and @record_date. This works great if you only want one result. However, now what I want to do is not provide those variables and get the result set back for each login and record_date combination. The hitch is that there are several other variables that are built off of the two that are supplied. Here is the query:
DECLARE @login char(20), /*This sets the rep for the query.*/
@record_date datetime, /*This is the date that we want to run this for.*/
@RWPY decimal(18,2), /*This is the required wins per year.*/
@OCPW decimal(18,2), /*This is the opportunities closed per week.*/
@OACW decimal(18,2), /*This is opportunities advanced to close per week.*/
@TOC decimal(18,2), /*This is the total number of opportunities in close.*/
@OANW decimal(18,2), /*This is opportunities advanced to negotiate per week.*/
@TON decimal(18,2), /*This is the total number of opportunities in negotiate.*/
@OADW decimal(18,2), /*This is the opportunities advanced to demonstrate per week*/
@TOD decimal(18,2), /*This is the total number of opportunities in demonstrate.*/
@OAIW decimal(18,2), /*This is the opportunities advanced to interview per week.*/
@TOI decimal(18,2), /*This is the total number of opportunities in interview.*/
@OCW decimal(18,2), /*This is the opportunities created per week.*/
@TOA decimal(18,2) /*This is the total number of opportunities in approach.*/
SET @login = 'GREP'
SET @record_date = '12/18/2007'
SET @RWPY = (SELECT ((SELECT annual_quota FROM #pipelinehist WHERE loginname = @login AND record_date = @record_date)/(SELECT target_deal FROM #pipelinehist WHERE loginname = @login AND record_date = @record_date)))
SET @OCPW = (SELECT @RWPY/weeks FROM #pipelinehist WHERE loginname = @login AND record_date = @record_date)
SET @OACW = (SELECT @OCPW/cls_perc_adv FROM #pipelinehist WHERE loginname = @login AND record_date = @record_date)
SET @TOC = (SELECT @OACW*(cls_time/7) FROM #pipelinehist WHERE loginname = @login AND record_date = @record_date)
SET @OANW = (SELECT @OACW/neg_perc_adv FROM #pipelinehist WHERE loginname = @login AND record_date = @record_date)
SET @TON = (SELECT @OANW*(neg_time/7) FROM #pipelinehist WHERE loginname = @login AND record_date = @record_date)
SET @OADW = (SELECT @OANW/dem_perc_adv FROM #pipelinehist WHERE loginname = @login AND record_date = @record_date)
SET @TOD = (SELECT @OADW*(dem_time/7) FROM #pipelinehist WHERE loginname = @login AND record_date = @record_date)
SET @OAIW = (SELECT @OADW/int_perc_adv FROM #pipelinehist WHERE loginname = @login AND record_date = @record_date)
SET @TOI = (SELECT @OAIW*(int_time/7) FROM #pipelinehist WHERE loginname = @login AND record_date = @record_date)
SET @OCW = (SELECT @OAIW/app_perc_adv FROM #pipelinehist WHERE loginname = @login AND record_date = @record_date)
SET @TOA = (SELECT @OCW*(app_time/7) FROM #pipelinehist WHERE loginname = @login AND record_date = @record_date)
SELECT loginname,
CAST(@TOA AS decimal(18,1)) AS [Opps in Approach],
app_time AS [Approach Average Time],
app_perc_adv AS [Approach Perc Adv],
CAST(@TOI AS decimal(18,1)) AS [Opps in Interview],
int_time AS [Interview Average Time],
int_perc_adv AS [Interview Perc Adv],
CAST(@TOD AS decimal(18,1)) AS [Opps in Demonstrate],
dem_time AS [Demonstrate Average Time],
dem_perc_adv AS [Demonstrate Perc Adv],
CAST(@TON AS decimal(18,1)) AS [Opps in Negotiate],
neg_time AS [Negotiate Average Time],
neg_perc_adv AS [Negotiate Perc Adv],
CAST(@TOC AS decimal(18,1)) AS [Opps In Close],
cls_time AS [Close Average Time],
cls_perc_adv AS [Close Perc Adv]
FROM #pipelinehist
WHERE loginname = @login AND record_date = @record_date
Here is some sample data to use with this. With this sample data what I want to get back is a total of 30 records in the result set each with its data specific to the login and record_date of that returned record.
CREATE TABLE #pipelinehist (
glusftboid int IDENTITY(1,1) NOT NULL,
record_date datetime NOT NULL,
loginname char(20) NOT NULL,
app_new float NOT NULL,
app_time float NOT NULL,
app_perc_adv float NOT NULL,
int_time float NOT NULL,
int_perc_adv float NOT NULL,
dem_time float NOT NULL,
dem_perc_adv float NOT NULL,
neg_time float NOT NULL,
neg_perc_adv float NOT NULL,
cls_time float NOT NULL,
cls_perc_adv float NOT NULL,
target_deal money NOT NULL,
annual_quota money NOT NULL,
weeks int NOT NULL
) ON [PRIMARY]
INSERT into #pipelinehist VALUES ('12/17/2007 0:00', 'AREP', 56.8, 26.9, 0.57, 29.5, 0.47, 20, 0.67, 80.7, 0.53, 2.1, 0.97, 2194.93, 575000, 50)
INSERT into #pipelinehist VALUES ('12/17/2007 0:00', 'BREP', 33.2, 0.5, 0.9, 7.7, 0.77, 8, 0.77, 9.2, 0.6, 7.7, 0.64, 971.1, 330000, 50)
INSERT into #pipelinehist VALUES ('12/17/2007 0:00', 'CREP', 210.2, 0.3, 0.87, 6.6, 0.5, 13.7, 0.4, 16.3, 0.43, 1.5, 0.91, 461.25, 330000, 50)
INSERT into #pipelinehist VALUES ('12/17/2007 0:00', 'DREP', 47.6, 5, 0.53, 33.3, 0.6, 57.5, 0.53, 50, 0.7, 1.5, 1, 2045.7, 575000, 50)
INSERT into #pipelinehist VALUES ('12/17/2007 0:00', 'EREP', 75.3, 110.9, 0.47, 36, 0.5, 17.4, 0.87, 20.3, 0.6, 7.2, 0.83, 2021.74, 775000, 50)
INSERT into #pipelinehist VALUES ('12/17/2007 0:00', 'FREP', 17.2, 23.3, 0.73, 6.8, 0.8, 6.3, 0.93, 29.7, 0.67, 15.5, 0.83, 2218.95, 575000, 50)
INSERT into #pipelinehist VALUES ('12/17/2007 0:00', 'GREP', 105.4, 67, 0.2, 32.9, 0.43, 18.5, 0.67, 8.9, 0.77, 3.5, 0.93, 1838.91, 400000, 50)
INSERT into #pipelinehist VALUES ('12/17/2007 0:00', 'HREP', 116.4, 118.5, 0.33, 30.9, 0.77, 46.3, 0.77, 46.3, 0.6, 0.9, 0.97, 1735.13, 1150000, 50)
INSERT into #pipelinehist VALUES ('12/17/2007 0:00', 'IREP', 143.3, 9, 0.77, 96, 0.17, 21.6, 0.77, 39.9, 0.43, 0.9, 0.93, 1385.43, 400000, 50)
INSERT into #pipelinehist VALUES ('12/17/2007 0:00', 'JREP', 179.4, 66.7, 0.7, 67.6, 0.1, 41.4, 0.6, 20.2, 0.8, 14, 0.7, 1563.76, 330000, 50)
INSERT into #pipelinehist VALUES ('12/17/2007 0:00', 'KREP', 107.6, 38.2, 0.23, 47.5, 0.47, 21.3, 0.77, 9.6, 0.73, 2.1, 0.83, 2120, 575000, 50)
INSERT into #pipelinehist VALUES ('12/17/2007 0:00', 'LREP', 18.6, 8.3, 0.87, 23.2, 0.57, 2.6, 0.87, 12.2, 0.67, 1, 1, 1229.02, 330000, 50)
INSERT into #pipelinehist VALUES ('12/17/2007 0:00', 'MREP', 4, 46.2, 0.6, 26.7, 0.57, 8.1, 0.87, 1.7, 0.9, 1.4, 1, 1091.22, 350000, 50)
INSERT into #pipelinehist VALUES ('12/17/2007 0:00', 'NREP', 54, 21.6, 0.57, 1.7, 0.77, 11, 0.8, 7.4, 0.9, 49, 0.47, 3240.68, 1300000, 50)
INSERT into #pipelinehist VALUES ('12/17/2007 0:00', 'OREP', 37.6, 24.4, 0.57, 50.1, 0.43, 6.7, 0.87, 15.6, 0.73, 0.9, 0.97, 1163.48, 330000, 50)
INSERT into #pipelinehist VALUES ('12/18/2007 0:00', 'AREP', 57.2, 32.5, 0.6, 29.5, 0.47, 20, 0.67, 85.6, 0.5, 2.1, 0.97, 2194.93, 575000, 50)
INSERT into #pipelinehist VALUES ('12/18/2007 0:00', 'BREP', 33.9, 0.5, 0.93, 7.8, 0.73, 8.3, 0.77, 9.2, 0.6, 7.7, 0.64, 971.1, 330000, 50)
INSERT into #pipelinehist VALUES ('12/18/2007 0:00', 'CREP', 152.1, 0, 0.87, 4.3, 0.67, 9.7, 0.47, 15.7, 0.47, 1.8, 0.85, 396.43, 330000, 50)
INSERT into #pipelinehist VALUES ('12/18/2007 0:00', 'DREP', 80.5, 9.8, 0.5, 40.7, 0.57, 68.3, 0.43, 64.2, 0.57, 1.5, 1, 2045.7, 575000, 50)
INSERT into #pipelinehist VALUES ('12/18/2007 0:00', 'EREP', 61, 92.1, 0.5, 31, 0.53, 16.9, 0.83, 17.7, 0.6, 7.3, 0.83, 2318.04, 775000, 50)
INSERT into #pipelinehist VALUES ('12/18/2007 0:00', 'FREP', 19.4, 21.1, 0.7, 5.3, 0.77, 2.2, 0.93, 33.3, 0.7, 9.7, 0.87, 1937.17, 575000, 50)
INSERT into #pipelinehist VALUES ('12/18/2007 0:00', 'GREP', 81.7, 40.5, 0.3, 33, 0.37, 18.5, 0.67, 8.9, 0.77, 3.5, 0.93, 1838.91, 400000, 50)
INSERT into #pipelinehist VALUES ('12/18/2007 0:00', 'HREP', 128.6, 115.7, 0.3, 30.9, 0.77, 46.3, 0.77, 48.8, 0.6, 0.9, 0.97, 1728.29, 1150000, 50)
INSERT into #pipelinehist VALUES ('12/18/2007 0:00', 'IREP', 100.9, 3.4, 0.77, 86.2, 0.27, 18, 0.8, 54.7, 0.37, 0.9, 0.93, 1385.43, 400000, 50)
INSERT into #pipelinehist VALUES ('12/18/2007 0:00', 'JREP', 179.4, 66.7, 0.7, 63.5, 0.1, 41.4, 0.6, 20.2, 0.8, 14, 0.7, 1563.76, 330000, 50)
INSERT into #pipelinehist VALUES ('12/18/2007 0:00', 'KREP', 285.2, 36.5, 0.1, 46, 0.43, 24.2, 0.73, 9.6, 0.73, 2.1, 0.83, 2120, 575000, 50)
INSERT into #pipelinehist VALUES ('12/18/2007 0:00', 'LREP', 17.6, 7.3, 0.9, 21.5, 0.57, 1.7, 0.87, 12.2, 0.67, 1, 1, 1250.54, 330000, 50)
INSERT into #pipelinehist VALUES ('12/18/2007 0:00', 'MREP', 26.7, 46.2, 0.6, 26.7, 0.57, 8.1, 0.87, 1.7, 0.9, 1.3, 1, 979.7, 350000, 50)
INSERT into #pipelinehist VALUES ('12/18/2007 0:00', 'NREP', 61.6, 20.8, 0.5, 1.7, 0.77, 11, 0.8, 7.4, 0.9, 49, 0.47, 3240.68, 1300000, 50)
INSERT into #pipelinehist VALUES ('12/18/2007 0:00', 'OREP', 31.6, 16.9, 0.63, 50.1, 0.43, 7.2, 0.87, 19.5, 0.7, 0.9, 0.97, 1303.48, 330000, 50)
Hi all..
How to reflect deleted records in Sql Server table to the Dataset?
-- using a web service --
Thank you..
I created very simple table with 3 columns and one is varchar(max) datatype
When i insert records thru VC++ ADO code i am getting this error
Exception Description Multiple-step OLE DB operation generated errors. Check e
ach OLE DB status value, if available. No work was done. and Error Number:: -2147217887
ODBC Driver: SQL Native Client
SQL server 2005
Table
CREATE TABLE [dbo].[RAVI_TEMP](
[ID] [int] NULL,
[Name] [varchar](max) NULL,
[CITY] [varchar](50) NULL
)
VC++ code
#include "stdafx.h"
#include <string>
#include <strstream>
#include <iomanip>
int main(int argc, char* argv[])
{
try
{
HRESULT hr = CoInitialize(NULL);
_RecordsetPtr pExtRst = NULL;
_bstr_t bstrtDSN, bstrtSQL;
bstrtDSN = L"DSN=espinfo;UID=opsuser;PWD=opsuser;";
bstrtSQL = L"SELECT * FROM RAVI_TEMP";
_variant_t vartValueID,vartValueNAME,vartValueCITY;
_bstr_t bstrtValueID,bstrtValueNAME,bstrtValueCITY;
pExtRst.CreateInstance(__uuidof(Recordset));
hr = pExtRst->Open(bstrtSQL, bstrtDSN, adOpenDynamic, adLockOptimistic, adCmdText);
hr = pExtRst->AddNew();
bstrtValueID = L"1";
vartValueID = bstrtValueID.copy();
bstrtValueNAME = L"RAVIBABUBANDARU";
vartValueNAME = bstrtValueNAME.copy();
bstrtValueCITY = L"Santa Clara";
vartValueCITY = bstrtValueCITY.copy();
pExtRst->GetFields()->GetItem(L"ID")->Value = vartValueID;
pExtRst->GetFields()->GetItem(L"NAME")->Value = vartValueNAME;
pExtRst->GetFields()->GetItem(L"CITY")->Value = vartValueCITY;
pExtRst->Update();
pExtRst->Close();
}
catch(_com_error e)
{
printf("Exception Description %s and Error Number:: %d",(LPTSTR)e.Description(),e.Error());
return e.Error();
}
return 0;
CoUninitialize();
}
if i use regular SQL ODBC driver, no error but its truncating the data
Adv Thanks for your help
Hi
I've created a sproc in SQL2000 that returns a dataset from a temp table & the number of records it's returning as an output parameter, although I can't seem to retrieve the value it's returning in asp.net although I get the dataset ok.
This is my sproc
create procedure return_data_and_value
@return int output
as
set nocount on
...
...
select * from #Table
select @return = count(*) from #Table
drop table #Table
go
This is asp.net code
Dim nRecords as Int32
Dim cmd As SqlCommand = New SqlCommand("return_data_and_value", conn)
cmd.CommandType = CommandType.StoredProcedure
Dim prm As SqlParameter = New SqlParameter("@return", SqlDbType.Int)
prm.Direction = ParameterDirection.Output
cmd.Parameters.Add(prm)
conn.Open()
dr = cmd.ExecuteReader
nRecords = convert.int32(cmd.parameters(@return).value)
conn.close
Thanks
Lbob
I have a transformation where final result set give me 25 rows of data. Now before I put into destination table, I need to add another column which will show how many total records we have. Like.
My dataset:
A 20 abc
B 24 mnp
c 44 apq
Now I need to add another column within my transformation before I store the result set to destination like this:
A 20 abc 3
b 24 mnp 3
c 44 apq 3
Here. new column gives count of total rows in our dataset which was 3.
How can I achieve this? Can I use derive column to this?
I have a report with multiple datasets, the first of which pulls in data based on user entered parameters (sales date range and property use codes). Dataset1 pulls property id's and other sales data from a table (2014_COST) based on the user's parameters. I have set up another table (AUDITS) that I would like to use in dataset6. This table has 3 columns (Property ID's, Sales Price and Sales Date). I would like for dataset6 to pull the Property ID's that are NOT contained in the results from dataset1. In other words, I'd like the results of dataset6 to show me the property id's that are contained in the AUDITS table but which are not being pulled into dataset1. Both tables are in the same database.
View 0 Replies View RelatedI have a small number of rows in a dataset, Table 1. There is a CLOB on a large dataset, Table 2. They join on a PK. I would like to retrieve this CLOB and add it to the data flow for Table1. In short I want to emulate the following:
Table 1: Small table without CLOB, 10 rows.
Table 2: Large table with CLOB, 10,000,000 rows
select CLOB
from table2
where pk = (select pk from table1)
I want this to return the CLOBs for the small number of rows in Table 1. The PK is indexed obviously so it should be a fast look up.
Table 1 and Table 2 live on different Oracle databases. How do I perform this operation efficiently in SSIS? It seems the Lookup and Merge Join wont do this.
I have a report with multiple datasets, the first of which pulls in data based on user entered parameters (sales date range and property use codes). Dataset1 pulls property id's and other sales data from a table (2014_COST) based on the user's parameters.
I have set up another table (AUDITS) that I would like to use in dataset6. This table has 3 columns (Property ID's, Sales Price and Sales Date). I would like for dataset6 to pull the Property ID's that are NOT contained in the results from dataset1. In other words, I'd like the results of dataset6 to show me the property id's that are contained in the AUDITS table but which are not being pulled into dataset1. Both tables are in the same database.
I found out the data I need for my SQL Report is already defined in a dynamic dataset on another web service. Is there a way to use web services to call another web service to get the dataset I need to generate a report? Examples would help if you have any, thanks for looking
View 2 Replies View Related
Is there any way to display this information in the report?
Thanks
Hi,
I have a stored procedure attached below. It returns 2 rows in the SQL Management studio when I execute MyStorProc 0,28. But in my program which uses ADOHelper, it returns a dataset with tables.count=0.
if I comment out the line --If @Status = 0 then it returns the rows. Obviously it does not stop in
if @Status=0 even if I pass @status=0. What am I doing wrong?
Any help is appreciated.
ALTER PROCEDURE [dbo].[MyStorProc]
(
@Status smallint,
@RowCount int = NULL,
@FacilityId numeric(10,0) = NULL,
@QueueID numeric (10,0)= NULL,
@VendorId numeric(10, 0) = NULL
)
AS
SET NOCOUNT ON
SET CONCAT_NULL_YIELDS_NULL OFF
If @Status = 0
BEGIN
SELECT ......
END
If @Status = 1
BEGIN
SELECT......
END
Grrr!I'm trying to run a script:print 'Declaring cursor'declare cInv cursor forward_only static forselectdistinctinv.company,inv.contact,inv.address1,inv.city,inv.state,inv.postalcode,inv.cmcompanyidfromdedupe.dbo.ln_invoice as invleft joindedupe.dbo.customerid as cidondbo.fnCleanString(inv.company) = cid.searchcowhere((inv.customerid is nulland cid.searchco is null)and (inv.date >= '01/01/2003' or (inv.date < '01/01/2003' andinv.outstanding > 0.01))and not inv.company is null)print 'Cursor declared'declare@contact varchar(75),@company varchar(50),@address1 varchar(75),@city varchar(30),@state varchar(20),@zip varchar(10),@cmcompanyid varchar(32),@iCount int,@FetchString varchar(512)open cInvprint 'cursor opened'fetch cInv into@company,@contact,@address1,@city,@state,@zip,@cmc ompanyidprint 'Cursor fetched @@Cursor_rows = ' + cast(@@cursor_rows asvarchar(5))All the prints are there to help me figure out what's going on!When I get to the Print 'Cursor fetched @@cursor_rows....the value is 0 and the script skips down to the close and deallocate.BUT, if I just highlight the Select...When section, I get over 2,000rows. What am I missing?Thanks.
View 6 Replies View Relatedi have two datasets.one dataset have old data from some other database.second dataset have original data from sql server 2005 database.both database have same field having id as a primary key.i want to transfer all the data from first dataset to new dataset retaining the previous data but if old dataset have the same id(primary key) as in the new one then that row will not transfer.
but if the id(primary key) have changed values then the fields updated with that data.how can i do that.
Hi,
I have two datasets in my report, D1 and D2.
D1 is a list of classes with classid and title
D2 is a list of data. each row in D2 has a classid. D2 may or may not have all the classids in D1. all classids in D2 must be in D1.
I want to show fields in D2 and group the data with classids in D1 and show every group as a seperate table. If no data in D2 is available for a classid, It shows a empty table.
Is there any way to do this in RS2005?
writing the query for the following, I need to collapse the continuity. If the termdate for an ID is one day less than the effdate of the next id (for the same ID) i need to collapse the records. See below example .....how should i write the query which will give me the desired output. i.e., get min(effdate) and max(termdate) if termdate is one day less than the effdate of next record.
ID effdate termdate
556868 1999-01-01 1999-06-30
556868 1999-07-01 1999-10-31
556869 2002-10-01 2004-01-31
556872 1999-02-01 2000-08-31
556872 2000-11-01 2004-01-31
556872 2004-02-01 2004-02-29
output should be ......
ID effdate termdate
556868 1999-01-01 1999-10-31
556869 2002-10-01 2004-01-31
556872 1999-02-01 2000-08-31
556872 2000-11-01 2004-02-29
Using this IIF statement:
=CountDistinct(IIF(Fields!Released_DT.Value = Fields!Date2.Value, Fields!Name.Value,
Nothing))
Released_DT = a date - 09/03/2015 or 09/02/2015
Date2 = returns another date value in this case 09/03/2015
What I'm trying to do is: count distinct number of people (Fields!Name.Value) if the Relased_DT = Date2.My IIF statement is returning a zero value.
Hi every body...
I have a probleme
I have a web Services which contains a method getValue(IDEq (int), idIndicator(int), startTime(dateTime), endTime(dateTime))
I need to call this method. But my problem is how pass parameter ?
I see the tab Param but it isn't work as I wait,... maybe I do a mistake...
I want that statTime and endTime are select by the user via a calendar for example...
now idIndicator and idEq was result of an other dataSet from a xml datasource...
But I don't how integrate dynamically... I try to enter a parameter via the param tab, and create and expression :
=First(Fields!idEq.Value, "EquipmentDataSet")
but when i execute the query, the promter display <NULL>...
So I don't know how to do and if it is possible !
I hope someone can help me !
Thank you !
Hi experts,
I'm not sure my design is normal or not. Please give me some advice.
I've a dataset and query by a field name 'companyid'.
select * from companyid where companyid = @icompany which @icompany is a input field.
if user select all, i'll send 0 to @icompany then I need to select all records.
question 1. How can I get all records? (i think about this query select * from companyid <> 0)
if user select for example companyid = 1, i'll send 1 to @icompany and the query work fine.
question 2. How can I change the query to adopt this 2 condition?
Thanks a lot,
Jeff
CREATE PROCEDURE UpdateAccount
(
@AccountID int,
@EmailAddress varchar(255),
@Password varchar(16)
)
AS
DECLARE @actualPassword varchar(16)
SELECT @actualPassword = Password
FROM Account WHERE AccountID = @AccountID
If Exists( SELECT EmailAddress FROM Account
WHERE EmailAddress = @EmailAddress )
RETURN -1
ELSE IF @Password <> @actualPassword
RETURN - 2
ELSE
UPDATE Account
SET
EmailAddress = @EmailAddress,
Password = @Password
WHERE AccountID = @AccountID
GO
I have a situation where deleting old records is blocking updating latest records on highly transactional table and getting timeout errors from application.
In details, I have one table called Tran_table1 in OLTP database. This Tran_table1 is highly transactional table, it will receive data for insert/update continuously
While archiving 2 years old records from Tran_table1 into Tran_table1_archive in batches(using DELETE OUTPUT INTO clause), if there is any UPDATEs on Tran_table1,these updates are getting blocked and result is timeout errors in application.
Is there any SQL Server hints to avoid blocking ..
declare @table table (
ParentID INT,
ChildID INT,
Value float
)
INSERT INTO @table
SELECT 1,1,1.2
[code]....
This case ParentID - Child 1 ,1 & 2,2 and 3,3 records are called as parent where as null , 1 is child whoose parent is 1 similarly null,2 records are child whoose parent is 2 , .....
Now my requirement is to display parent records with value ascending and display next child records to the corresponding parent and parent records are sorted ascending
--Final output should be
PatentID ChildID VALUE
33 1.12
null3 56.7
null3 43.6
11 1.2
null1 4.8
null1 4.6
22 1.8
null1 1.4
HI,
I have been trying to solve the locking problem from past couple of days. Please help mee!!
Scenario:
--------------
I have a SSIS package in which 2 data flow tasks. 1st data flow task deletes records from a 5 tables and the 2nd data flow task should insert records into 1 of the five tables after the success of 1st data flow task. This scenario runs in Transacation.
The above scenrio in the 2nd data flow task hangs in runtime. It does not complete. with sp_who2 command i could see that there is an intent share lock(LK_M_IS) on the table and the status is SUSPENDED.
I dont know how to come out of this locking. Please help.
Thanks ,
Sunil
Hello
Im searching for a solution to set all matrix row or cell the same height.
it schoud looks like this example:
This is a simple matrix
test a
text b
text c
text d
text e
text f
text g
This is a matrix with all the same row-height.
test a
text b
.
text c
.
.
text d
text e
text f
text g
.
.
Thx you a lot