I need some help from u.
This is datawarehousing related stuff.
I am having a source table as "test" and target table as "trg".
I need to extract the data in required format as per below loading instructions and then load the data into "trg" table.
Below sample data is only given one zipcode.There can be several codes.
drop table test
create table test
(
currentyear int,
district varchar(10),
school varchar(10),
rollno int,
zipcode varchar(10),
flag1_handicapped char(1),
flag2_disadvantaged char(1),
status varchar(10),
relation varchar(10)
)
/* inserted 11 rows */
insert into test values(2005,'D1','S1',101,'530024','Y','Y','E','R' )
insert into test values(2005,'D1','S1',101,'530024','N','N','E','R' )
insert into test values(2005,'D1','S1',101,'530024','N','N','E','NR ')
insert into test values(2005,'D1','S1',101,'530024','N','N','E','NR ')
insert into test values(2005,'D1','S1',101,'530024','N','N','E','NR ')
insert into test values(2005,'D1','S1',101,'530024','N','N','E','NR ')
insert into test values(2005,'D1','S1',101,'530024','N','N','E','NR ')
insert into test values(2005,'D1','S1',101,'530024','N','N','E','NR ')
insert into test values(2005,'D1','S1',101,'530024','N','N','E','NR ')
insert into test values(2005,'D1','S1',101,'530024','N','N','E','NR ')
insert into test values(2005,'D1','S1',101,'530024','Y','Y','E','NR ')
select * from test
--- Structure of the target table
create table trg
(
cyear int,
district varchar(10),
school varchar(10),
RollNo int,
zipcode varchar(10),
type varchar(20), /* This is an extra column with hard coded values which we need to assume as Total,flag1_handicapped,flag2_Disadvantaged.For Every unique zipcode i need to GROUP BY these 3 values.
These values never come from the source table i.e "test".But we can make use of the 2 source columns "flag1_handicapped" & "flag2_Disadvantaged"*/
actaul_cnt int,
empl_related int,
empl_not_related int,
modified_date datetime
)
-- The below table shows what values should get loaded into trg table
----------------------------------------------------------------------
trg table columnvalue to be loaded Description
-----------------------------------------------------------------------
cyear test.currentyear
districttest.district
schooltest.school
rollnotest.rollno
zipcodetest.zipcode
type /* here we to load 3 rows with 3 values
This table contains some calculated columns. such as "actual_cnt","empl_related","empl_not_related" and so on...
Every calculation should be grouped by this "type" column.For reference the you can see the bottom output rows how they should look like.
The 3 valid values for this type column is "Total","flag1_handicapped","Disadavantaged".
"Total" means = All the records which satisfies the calculation.
"flag1_handicapped" means = All the records which statisfies the calculation and have test.flag1_handicapped = 'Y'
"flag2_Disadvantaged" means = All the records which satisfies the calculation and have test.disadvanatged = 'Y'*/
actaul_cnt This is a calculated column. The calc is as follows:
count of records grouped by currentyear,district,school,zipcode,type(flag1_han dicapped,flag2_Disadvantaged,total)
empl_relatedThis is again calculated column. The calc is as follows.
count of records where status='E' and relation = 'R' grouped by currentyear,district,school,zipcode,type(flag1_han dicapped,flag2_Disadvantaged,total)
empl_not_related This is again calculated column. The calc is as follows.
count of records where status='E' and relation = 'NR' grouped by currentyear,district,school,zipcode,type(flag1_han dicapped,flag2_Disadvantaged,total)
Here is the sample template which i felt like using to load the data. We need to modify this query littlt bit accordingly as per above rules.
select
currentyear as "CYear",
district as "District",
school as "School",
rollno as "RollNo",
zipcode as "zipcode",
count(*) "actaul_count",
sum(case when (status='E' and relation='R') then 1 else 0 end) "Emp_Related",
sum(case when (status='E' and relation='NR') then 1 else 0 end) "Emp_Not_Related",
getdate() "Date"
from test
group by currentyear,
district,
school,
rollno,
zipcode
/* Using the above query we need to load 3 rows into below target table whose structure is defined as follows */
------------------------------------------------------------------------------------------------------------------------
But using above SELECT,i am able to get only row as output that to i am not able to show the "type" column in the output
------------------------------------------------------------------------------------------------------------------------
Basically i am not getting how to build the Group by clause and displaying the type code using above rules.
Can anyone help me out in solving the problem.
Do we need to perform any UNION ALL ON test.flag1_handicapped and test.flag2_Disadvantaged columns.?
This is totally seems out of box for me.
I am into starting a new dataware house project where i will be loading data from several sources to respective tables within databases.Are there any basic things which i need to set in doing this.
Iam using Sql Server Integration Service to transfer the data. I have to methods to transfer the data.
Method -1
Daily cleaning Dataware house Data base and transfering the data from Source database.
Method -2
Only new rows transfering from the Source database to dataware house data base.
If i use first method, Any performence issues's will come in the future?. In future my source data will have upto 6 lacks records.
If i use second method, daily date based i can transfer the data. But if they delete any previous records from the source database how can i reflect the same in Data ware house Data base.
i unpacked starter site and dw.pup file and i got 34 reports provided by commerce server 2007. i want to edit these reports. i followed these steps 1)created a "Report server project" in Visual studio 2005 2)In that project in "Shared data sources" folders i added "Startersite_Datawarehouse" of type "Microsoft SQL Server" 3)i added another shared data source name "Startersite_Datawarehouse" of the type "Microsoft SQL services analysis services" 4)later i added one of the reports to "Reports" folder by selecting "Add existing item". But in design mode of that report when i clicked "Preview" tab i am getting the error "an error occured during the local report processing. The item /CSDW_olap cant be found"
when i clicked "data" tab i am getting this below error "Connection cant be made to database"
insert @table select '123b apple avenue' union all select '12b apple avenue' union all select '3b apple avenue' union all select '32 apple avenue' union all select '322 apple avenue' union all select '3 apple avenue'
select * from @table
how to select the records where the house number contain letter.
My name is Dr. James Triton. I am working on a research program for an unnamed University. Without getting into too much detail, I was wondering if any lower level college (or perhaps late high-school, depending on the strength of your Computer Science program) would be interested in filling out a few SQL queries, making an ER model or DDLs for a database.
Here is some example questions:
1.List each employee's first name, middle initial, and last name, concatenated to form a single value, as well as how many years they have been working for the company. An example name would appear as "JOHN Q SMITH". Sort the output by descending number of employment years. (HINT: create a column alias.) 2.List all of the job functions (such as "CLERK"), and the last names of all employees associated with each function. Order the output alphabetically by the functions. (HINT: there are a total of seven different functions.) 3.List the last name of every manager, along with the last names of the employees that the manager manages. Create column aliases "MANAGER" and "EMPLOYEE", and order the output by manager last name.
(there are 15 such queries) The table for these is located here:
I'm only have permition to query table data and with local sql server installed. Also, capable link server from local machine to live sql server (Blue). Getting error type when ran a query that commons: Column name or number of supplied values does not match table definition. Others, ambiguous column name " ". Here are the information below before i ran the query.
In house data:-Table fields contain (address,city,state,zip,zip4,fips) -All data type fields are character -No Primary Key
Local machine table: -Fipscodes (table) contain data was provided by customer that I inserted into my machine and column fields (state,zip,fips) made Zip as Primary Key.
So, I wants to able run a query to retrieve data from live server by using some kind of join table with table(FipsCodes)locate in my local machine.
FROM blue5.Homeowner.dbo.homeowners AS h INNER JOIN FipsCodes AS n ON h.FIPS = n.FIPS
WHERE state ='AL' AND fips='001' AND pubDate >= '12/1/2006' AND pubDate <='1/8/2007'
Error occur: Msg 209, Level 16, State 1, Line 1 Ambiguous column name 'State'. Server: Msg 209, Level 16, State 1, Line 1 Ambiguous column name 'FIPS'.
, please help me solve this issue and thank you very much everyone.
A few weeks ago I've done a SQL Server migration from SQL Server 2000 to SQL Server 2014.It was a bit tricky but anything worked fine.
I have some legacy VB6 (Visual Basic 6) applications written in house which worked with Databases on the old SQL server 2000.Surprisingly, these applications worked well after the upgrade to SQL Server 2014 without having to change a piece of code.
Now, some users tell me that they receive some unusual message when saving data from these legacy applications.After investing for a few hours, I discovered that triggers are not executed when those users try to save data from grids or forms in their applications.Trying to reproduce the INSERT statement in SQL Server Management Studio, the triggers run well.From the application, they don't.
These applications connect to Database Server thru OLEDB connection with the following ADO connection string :
Provider=SQLOLEDB.1;Password={password};User ID={user};Initial Catalog={db};Data Source={datasource}.the {user} is a true SQL account who have read/write/delete access in the databases.
On the web there is a lot of questions involving the same issue, but only from SSIS.I found some articles about an OLEDB connection parameter named FastLoadOptions with a value of FIRE_TRIGGERS, but nowhere how to put it in the ADO OLEDB connection string.
how to reactivate the "normal" use of triggers from an ADO OLEDB connection ?Either with some obscur parameter in the connection string or options somewhere in the SQL Server 2014.
does anybody know how I would create a connection string in asp.net 2.0 express to access a database in a different location from the web server. I have a static IP address on the web server, so I've allowed access from the web server through the firewall. I have a user name and password, and I've made sure that I have the correct database. Would I access the database using the network IP address and if so, where do I put it. Thank you to anyone that can give me some insight to this problem, I'm very new to asp.net so, about a weeks worth of knowledge, so if you could explain as such I would appreciate it.
-- Get the new Customer Identifier, return as OUTPUT param SELECT @NoteID = @@IDENTITY
-- Insert new notes for all the users that the note pertains to, in this case this will be by the assigned -- users. IF @FK_UserIDList IS NOT NULL EXECUTE spInsertNotesByAssignedUsers @NoteID, @FK_UserIDList
-- Insert New Address record -- Retrieve Address reference into @AddressId -- EXEC spInsertForUserNote -- @FK_UserID, --@NoteID, -- @BeenRead -- @Fax, -- @PKId, -- @AddressId OUTPUT
COMMIT TRANSACTION
-------------------------------------------------- GO
ok can someone tell me why i get two different answers for the same query. (looking for last day of month for a given date)
SELECT DATEADD(ms, - 3, DATEADD(mm, DATEDIFF(m, 0, CAST('12/20/2006' AS datetime)) + 1, 0)) AS Expr1 FROM testsupplierSCNCR I am getting the result of 01/01/2007
"Error: 8624, Severity: 16, State: 1 Internal Query Processor Error: The query processor could not produce a query plan. For more information, contact Customer Support Services."
I have traced this to an insert statement that executes as part of a stored procedure.
INSERT INTO ledger (journal__id, account__id,account_recv_info__id,amount)
There is also an auto-increment column called id. There are FK contraints on all of the columns ending in "__id". I have found that if I remove the contraint on account__id the procedure will execute without error. None of the other constraints seem to make a difference. Of course I don't want to remove this key because it is important to the database integrity and should not be causing problems, but apparently it confuses the optimizer.
Also, the strange thing is that I can get the procedure to execute without error when I run it directly through management studio, but I receive the error when executing from .NET code or anything using ODBC (Access).
Hey, i've written a query to search a database dependant on variables chosen by user etc etc. Opened up a new sqldatasource, entered the query shown below and went on to the test query page. Entered some test variables, everything works as it should do. Try to get it to show in a datagrid on a webpage - nothing. No data shows. SELECT dbo.DERIVATIVES.DERIVATIVE_ID, count(*) AS Matches FROM dbo.MAKES INNER JOIN dbo.MODELS ON dbo.MAKES.MAKE_ID = dbo.MODELS.MAKE_ID INNER JOIN dbo.DERIVATIVES ON dbo.MODELS.MODEL_ID = dbo.DERIVATIVES.MODEL_ID INNER JOIN dbo.[VALUES] ON dbo.DERIVATIVES.DERIVATIVE_ID = dbo.[VALUES].DERIVATIVE_ID INNER JOIN dbo.ATTRIBUTES ON dbo.[VALUES].ATTRIBUTE_ID = dbo.ATTRIBUTES.ATTRIBUTE_ID WHERE ((ATTRIBUTES.ATTRIBUTE_ID = @ATT_ID1 and (@VAL1 is null or VALUE = @VAL1)) or (ATTRIBUTES.ATTRIBUTE_ID = @ATT_ID2 and (@VAL2 is null or VALUE = @VAL2)) or (ATTRIBUTES.ATTRIBUTE_ID = @ATT_ID3 and (@VAL3 is null or VALUE = @VAL3)) or (ATTRIBUTES.ATTRIBUTE_ID = @ATT_ID4 and (@VAL4 is null or VALUE = @VAL4)) ) GROUP BY dbo.DERIVATIVES.DERIVATIVE_ID HAVING count(*) >= CASE WHEN @VAL1 IS NOT NULL THEN 1 ELSE 0 END + CASE WHEN @VAL2 IS NOT NULL THEN 1 ELSE 0 END + CASE WHEN @VAL3 IS NOT NULL THEN 1 ELSE 0 END + CASE WHEN @VAL4 IS NOT NULL THEN 1 ELSE 0 END -2 ORDER BY count(*) DESC
Here is the page source
<%@ Page Language="VB" MasterPageFile="~/MasterPage.master" Title="Untitled Page" %> <asp:Content ID="Content1" ContentPlaceHolderID="ContentPlaceHolder1" Runat="Server"> <asp:SqlDataSource ID="SqlDataSource1" runat="server" ConnectionString="<%$ ConnectionStrings:DevConnectionString1 %>" SelectCommand="	SELECT dbo.DERIVATIVES.DERIVATIVE_ID, count(*) AS Matches 	FROM dbo.MAKES INNER JOIN 				 dbo.MODELS ON dbo.MAKES.MAKE_ID = dbo.MODELS.MAKE_ID INNER JOIN 				 dbo.DERIVATIVES ON dbo.MODELS.MODEL_ID = dbo.DERIVATIVES.MODEL_ID INNER JOIN 				 dbo.[VALUES] ON dbo.DERIVATIVES.DERIVATIVE_ID = dbo.[VALUES].DERIVATIVE_ID INNER JOIN 				 dbo.ATTRIBUTES ON dbo.[VALUES].ATTRIBUTE_ID = dbo.ATTRIBUTES.ATTRIBUTE_ID 	WHERE ((ATTRIBUTES.ATTRIBUTE_ID = @ATT_ID1 and (@VAL1 is null or VALUE = @VAL1)) or 		 (ATTRIBUTES.ATTRIBUTE_ID = @ATT_ID2 and (@VAL2 is null or VALUE = @VAL2)) or 		 (ATTRIBUTES.ATTRIBUTE_ID = @ATT_ID3 and (@VAL3 is null or VALUE = @VAL3)) or 		 (ATTRIBUTES.ATTRIBUTE_ID = @ATT_ID4 and (@VAL4 is null or VALUE = @VAL4)) ) 	GROUP BY dbo.DERIVATIVES.DERIVATIVE_ID 	HAVING count(*) >= CASE WHEN @VAL1 IS NOT NULL THEN 1 ELSE 0 END + 									 CASE WHEN @VAL2 IS NOT NULL THEN 1 ELSE 0 END + 									 CASE WHEN @VAL3 IS NOT NULL THEN 1 ELSE 0 END + 									 CASE WHEN @VAL4 IS NOT NULL THEN 1 ELSE 0 END -2 	ORDER BY count(*) DESC "> <SelectParameters> <asp:ControlParameter ControlID="DropDownList1" Name="ATT_ID1" PropertyName="SelectedValue" /> <asp:ControlParameter ControlID="TextBox1" Name="VAL1" PropertyName="Text" /> <asp:Parameter Name="ATT_ID2" /> <asp:Parameter Name="VAL2" /> <asp:Parameter Name="ATT_ID3" /> <asp:Parameter Name="VAL3" /> <asp:Parameter Name="ATT_ID4" /> <asp:Parameter Name="VAL4" /> </SelectParameters> </asp:SqlDataSource> <asp:SqlDataSource ID="SqlDataSource2" runat="server" ConnectionString="<%$ ConnectionStrings:DevConnectionString1 %>" SelectCommand="SELECT * FROM [ATTRIBUTES]"></asp:SqlDataSource> <br /> <asp:DropDownList ID="DropDownList1" runat="server" DataSourceID="SqlDataSource2" DataTextField="ATTRIBUTE_NAME" DataValueField="ATTRIBUTE_ID"> </asp:DropDownList> <asp:TextBox ID="TextBox1" runat="server" AutoPostBack="True"></asp:TextBox><br /> <br /> <br /> <asp:GridView ID="GridView1" runat="server" AutoGenerateColumns="False" DataKeyNames="DERIVATIVE_ID" DataSourceID="SqlDataSource1"> <Columns> <asp:BoundField DataField="DERIVATIVE_ID" HeaderText="DERIVATIVE_ID" InsertVisible="False" ReadOnly="True" SortExpression="DERIVATIVE_ID" /> <asp:BoundField DataField="Matches" HeaderText="Matches" ReadOnly="True" SortExpression="Matches" /> </Columns> </asp:GridView> </asp:Content> AFAIK I have configured the source to pick up the dropdownlist value and the textbox value (the text box is autopostback). Am i not submitting the data correctly? (It worked with a simple query...just not with this one). I have tried a stored procedure which works when testing just not when its live on a webpage. Please help!
(Visual Web Devleoper 2005 Express and SQL Server Management Studio Express)
However, as you can see, the original select query is run twice and joined together.What I was hoping for is this to be done in the original query without the need to duplicate the original query.
I'm trying to find the command to open up an odbc conection inside sql2005 express. I only have ues of an odbc connector, we're conection to remedy. We will eventually be using stored procedures to extract the data we need from remedy and doing additional data crunching. I'm a foxpro programmer so once I get the correct syntax for making the odbc connector I shold be ok. Also I need a really good advanced book on sql2005. The type of book that would have my odbc answer. I've spent all morning trying to find this information and was unable to.
Thanks in advance
Daniel Buchanan.
If this was the wrong forum to post this on, please move this question to the correct one. I need this answer soon.
We have a issue with a MDS server that have been over us for a couple of days, the original error msg from SQL Server Engine is the one "The query processor could not produce a query plan" but the ones we get on the Excel-Addin are "Sequece contains no elements" or "The value cannot be null" T
• Using Microsoft SQL Server 2012 (SP1) - 11.0.3393.0 (X64) for 6months on this server without issues
• Two weeks ago we started to have 2 errors: "Sequence Contains No Elements" | "The Value Cannot Be Null"
• We are using the last version of Excel Add-in
• We try to reinstall the MDS feature
• If I backup/restore MDS database to other server it works
• We updated to SQL 2012 SP2 + CU4 but the error persisted ...
Looking at the MDSTraceLog we are routed to the this msg
SQL Error Debug Info: Number: 8624, Message: Internal Query Processor Error: The query processor could not produce a query plan. For more information, contact Customer Support Services., Server: bbdvsql03inst01, Proc: udpMetadataEntityGetDetailsXML, Line: 28
At line 28 udpMetadataEntityGetDetailsXML is calling udfMetadataEntityGetDetailsXML … and here is where we stopped
** Error found when try to get data from a entity using Excel add-in ** =================================== Sequence contains no elements ------------------------------ Program Location: at Microsoft.MasterDataServices.AsyncEssentials.AsyncResultBase.EndInvoke() at Microsoft.MasterDataServices.ExcelAddInCore.AsyncProviderBase`1.EndOperation(IAsyncResult ar)
how do I get the variables in the cursor, set statement, to NOT update the temp table with the value of the variable ? I want it to pull a date, not the column name stored in the variable...
create table #temptable (columname varchar(150), columnheader varchar(150), earliestdate varchar(120), mostrecentdate varchar(120)) insert into #temptable SELECT ColumnName, headername, '', '' FROM eddsdbo.[ArtifactViewField] WHERE ItemListType = 'DateTime' AND ArtifactTypeID = 10 --column name declare @cname varchar(30)
-- The 3rd query uses an incorrect column name in a sub-query and succeeds but rows are incorrectly qualified. This is very DANGEROUS!!! -- The issue exists is in 2008 R2, 2012 and 2014 and is "By Design"
set nocount on go if object_id('tempdb.dbo.#t1') IS NOT NULL drop table #t1 if object_id('tempdb.dbo
[code]....
This succeeds when the invalid column name is a valid column name in the outer query. So in this situation the sub-query would fail when run by itself but succeed with an incorrectly applied filter when run as a sub-query. The danger here is that if a SQL Server user runs DML in a production database with such a sub-query which then the results are likely not the expected results with potentially unintended actions applied against the data. how many SQL Server users have had incorrectly applied DML or incorrect query results and don't even know it....?
For each customer, I want to add all of their telephone numbers to a different column. That is, multiple columns (depending on the number of telephone numbers) for each customer/row. How can I achieve that?
I want my output to be
CUSTOMER ID, FIRST NAME, LAST NAME, TEL1, TEL2, TEL3, ... etc
Each 'Tel' will relate to a one or more records in the PHONES table that is linked back to the customer.
do i need to nest a query in RS if i want a calculated column to be compared against a multi value variable? It looks like coding WHERE calcd name in (@variable) violates SQL syntax. My select looked like
SELECT ... ,CASE enddate WHEN null then 1 else 0 END calcd name FROM... WHERE ... and calcd name in (@variable)
When viewing an estimated query plan for a stored procedure with multiple query statements, two things stand out to me and I wanted to get confirmation if I'm correct.
1. Under <ParameterList><ColumnReference... does the xml attribute "ParameterCompiledValue" represent the value used when the query plan was generated?
2. Does each query statement that makes up the execution plan for the stored procedure have it's own execution plan? And meaning the stored procedure is made up of multiple query plans that could have been generated at a different time to another part of that stored procedure?
FROM [Order Details] OD, Orders O, Products P, Categories C
WHERE OD.OrderID = O.OrderID
AND OD.ProductID = P.ProductID
AND P.CategoryID = C.CategoryID
AND C.CategoryName = @CategoryName
AND SUBSTRING(CONVERT(nvarchar(22), O.OrderDate, 111), 1, 4) = @OrdYear
GROUP BY ProductName
ORDER BY ProductName
//////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////// From an ADO.NET 2.0 book, I copied the code of ConnectionPoolingForm to my VB 2005 Express. The following is part of the code:
Imports System.Collections.Generic
Imports System.ComponentModel
Imports System.Drawing
Imports System.Text
Imports System.Windows.Forms
Imports System.Data
Imports System.Data.SqlClient
Imports System.Data.Common
Imports System.Diagnostics
Public Class ConnectionPoolingForm
Dim _ProviderFactory As DbProviderFactory = SqlClientFactory.Instance
Public Sub New()
' This call is required by the Windows Form Designer.
InitializeComponent()
' Add any initialization after the InitializeComponent() call.
'Force app to be available for SqlClient perf counting
Using cn As New SqlConnection()
End Using
InitializeMinSize()
InitializePerfCounters()
End Sub
Sub InitializeMinSize()
Me.MinimumSize = Me.Size
End Sub
Dim _SelectedConnection As DbConnection = Nothing
Sub lstConnections_SelectedIndexChanged(ByVal sender As Object, ByVal e As EventArgs) Handles lstConnections.SelectedIndexChanged
End Sub /////////////////////////////////////////////////////////////////////////////////////////////////////////////////////// I executed the code successfully and I got a box which asked for "Enter the query string". I typed in the following: EXEC dbo.SalesByCategory @Seafood. I got the following box: Query attempt failed. Must declare the scalar variable "@Seafood". I am learning how to enter the string for the "SQL query programed in the subQuery_Click(ByVal sender As Object, ByVal e As EventArgs) Handles btnQuery.Click" (see the code statements listed above). Please help and tell me what I missed and what I should put into the query string to get the information of the "Seafood" category out.
I have two tables .. in one (containing user data, lets call it u).The important fields are:u.userName, u.userID (uniqueidentifier) and u.workgroupID (uniqueidentifier)The second table (w) has fieldsw.delegateID (uniqueidentifier), w.workgroupID (uniqueidentifier) The SP takes the delegateID and I want to gather all the people from table u where any of the workgroupID's for that delegate match in w. one delegateID may be tied to multiple workgroupID's. I know I can create a temporary table (@wgs) and do a: INSERT INTO @wgs SELECT workgroupID from w WHERE delegateID = @delegateIDthat creates a result set with all the workgroupID's .. this may be one, none or multipleI then want to get all u.userName, u.userID FROM u WHERE u.workgroupIDThis query works on an individual workgroupID (using another temp table, @users to aggregate the results was my thought, so that's included) INSERT INTO @users SELECT u.userName,u.userID FROM tableU u LEFT JOIN tableW w ON w.workgroupID = u.workgroupID WHERE u.workgroupID = @workGroupIDI'm trying to avoid looping or using a CURSOR for the performance hit (had to kick the development server after one of the cursor attempts yesterday)Essentially what I'm after is: SELECT u.userName,u.userID FROM tableU u LEFT JOIN tableW w ON w.workgroupID = u.workgroupID WHERE u.workgroupID = (SELECT workgroupID from w WHERE delegateID = @delegateID) ... but that syntax does not work and I haven't found another work around yet.TIA!
When I run the following query from Query Analyzer in SQL Serer 2005, I get a message back that says. Command(s) completed successfully. What I really need it to do is to display the results of the query. Does anyone know how to do this? declare @SniierId as uniqueidentifierset @SniierId = '85555560-AD5D-430C-9B97-FB0AC3C7DA1F'declare @SniierAlias as nvarchar(50)declare @AlwaysShowEditButton as bitdeclare @SniierName as nvarchar (128)/* Check access for Sniier */SELECT TOP 1 @SniierName = Sniiers.SniierName, @SniierAlias = Sniiers.SniierAlias, @AlwaysShowEditButton = Sniiers.AlwaysShowEditButtonFROM SniiersWHERE Sniiers.SniierId=@SniierId
I am trying to run queries against any of the user tables in my MS SQL 7.0 database. I get a message the Query Designer encountered a query error. We have tried rebooting the SQL Server and I am still getting these messages. Also, the SQL error logs look fine - all database maintenance are running successfully including the DBCCs which show no errors. Any help would be greatly appreciated as we are to go into production in a few days.
How to optimize the following Stored procedure running on MSSQL server 2000 sp4 :
CREATE PROCEDURE proc1 @Franchise ObjectId , @dtmStart DATETIME , @dtmEnd DATETIME AS BEGIN
SET NOCOUNT ON
SELECT p.Product , c.Currency , c.Minor , a.ACDef , e.Event , t.Dec , count(1) "Count" , sum(Amount) "Total" FROM tb_Event t JOIN tb_Prod p ON ( t.ProdId = p.ProdId ) JOIN tb_ACDef a ON ( t.ACDefId = a.ACDefId ) JOIN tb_Curr c ON ( t.CurrId = c.CurrId ) JOIN tb_Event e ON ( t.EventId = e.EventId ) JOIN tb_Setl s ON ( s.BUId = t.BUId and s.SetlD = t.SetlD ) WHERE Fran = @Franchise AND t.CDate >= @dtmStart AND t.CDate <= @dtmEnd AND s.Status = 1 GROUP BY p.Product , c.Currency , c.Minor , a.ACDef , e.Event , t.Dec
I am able to run a query which runs FAst in QA but slow in theapplication.It takes about 16 m in QA but 1000 ms on theApplication.What I wanted to know is why would the query take a longtime in the application when it runs fast on SQL server?How should we try debugging it?Ajay
