How can I format the current date as yyyy-mm-dd and display it in a text box on the report. The FormatDateTime function only allows certain NamedFormat for the short and long dates but does not satisfy the above requirements. Any ideas?
A date field in a report returns the date value as:
2015-07-01 13:30:27.000
Is there any way I can script this to appear as:
01 July 2015 (or 01-07-2015 or 01/07/2015)Â - basically to cut out the hours, minutes and seconds?
The best I have managed is: CONVERT (varchar(17),DATE,113) AS Date1 but this still leaves me with:
01 July 2015 13:30
Hi,I need a way of changing the following SQL statement so that the dates are without the hh:mm:ss tt:"Select DISTINCT([StartDate]) From [Events]"How can this be done?Thanks,Curt.
View 4 Replies View RelatedI'm currently getting a date in this format 2001-10-08 10:35:45
(yyyy-mm-dd hh:mm:ss) how would I convert the date to this format
2001-10-08/10:35:45 (yyyy-mm-dd/hh:mm:ss)? The only thing added was the / between the date and time.
Thanks in advance,
Ed
Hi,
I need to know how i can format the date so that the query results will come out as the format mm/dd/yy hh:mm:ss?
Thanks alot.
Hello everyone,
I have a date field called book_flag_date of varchar data type.
The values in the table look like this:
3/4/2008 14:32:59
OR
3/4/2008 14:9:0
The issue arises when I am ordering by. I want the value
3/4/2008 14:9:0 to format to 3/4/2008 14:09:00
Thank you very much for your help.
I am trying to format a date value as XX/XX/XX when I place a "d" in the format property it formats it as XX/XX/XXXX any ideas on how to change it to XX/XX/XX?
thanks in advance
My problem is with the paramater format date.
My code and data in SQL are showing the date correctly as dd/mm/yyyy.
When I run report in SSRS a couple of columns show the date mm/dd/yyyy.
The format option in all cells are set to 'd'. There is no difference between the properties on these cells.
The dates themselves seem to go wrong on the date "31/12/4000" and returns them as "12/31/4000".
Any help wqould be appreciated
Helo All -
I would greatly appreciate some help formatting the values for my sproc.
I need to call a sproc and pass it the values StartTime and EndTime from a web form. The web form uses 3 DDLs for the Start Hour, Start Minute and Start AM/PM as well as 3 DDLs for the End Hour, End Minute and End AM/PM.
When I call the sproc, I get the error:
SqlDateTime overflow. Must be between 1/1/1753 12:00:00 AM and 12/31/9999 11:59:59 PM.
Here is the sample column data: 2:06 PM which is stored as nvarchar in the sql db
Here is the Sub and the Sproc,
Sub Protected Sub btnDateQuery_Click(ByVal sender As Object, ByVal e As System.EventArgs) Handles btnDateQuery.Click
pnlFiltered.Visible = True
pnlShowAll.Visible = FalseDim StartTime As DateTime
Dim EndTime As DateTimeStartTime = ddlFromHour.SelectedValue + ":" + ddlFromMinute.SelectedValue + ":" + "00 " + ddlFromAMPM.SelectedValue
EndTime = ddlToHour.SelectedValue + ":" + ddlToMinute.SelectedValue + ":" + "00 " + ddlToAMPM.SelectedValueStartTime = CDate("2:07:00 AM")
EndTime = CDate("2:07:00 AM")Dim Query_TA As New dalDataFeedsdefsTableAdapters.spFilterExpectedEndTimeTableAdapterDim returncode As Integer = 0
Query_TA.GetExpectedEndTimeData(StartTime, EndTime)
Dim Select_TA As New dalDataFeedsdefsTableAdapters.spDynamic_Basics_TblTableAdapterDim dv As New DataView
Try
dv = Query_TA.GetExpectedEndTimeData(StartTime, EndTime).DefaultView()Catch ex As Exception
Response.Write(StartTime + " - " + EndTime)
End TryWith DataFeedGridView
.DataSource = dv
.DataBind()
End With
End Sub
SPROC ALTER PROCEDURE [dbo].[spFilterExpectedEndTime]
-- Add the parameters for the stored procedure here
@StartTime datetime,@EndTime datetime
AS
BEGIN
-- SET NOCOUNT ON added to prevent extra result sets from
-- interfering with SELECT statements.
SET NOCOUNT ON;
-- Insert statements for procedure here
select * From tmpBasics
where convert(datetime, ltrim(rtrim(starttime)), 114) >= @StartTime and dateadd(mi,convert(int, duration), convert(datetime, ltrim(rtrim(starttime)), 114)) <= @EndTime
order by convert(datetime, ltrim(rtrim(starttime)), 114)
END
Thanks,
Pat
I converted an Access Database to SQL Express. The dates were converted to datetime
I'm using VWD 2005
Here is the source of my date and the query.
sqlDate = (DateTime.Now.AddDays(-7))
sqlTxt = "SELECT Service_Orders.SStore_Assigned_Number, Store_Info.Store_Other, Service_Orders.PO_Number, Service_Orders.SWorkType, Service_Orders.Service_Order_Number, Service_Orders.SDate_Entered, Service_Orders.SContact, Service_Orders.SClosed FROM Service_Orders INNER JOIN Store_Info ON Service_Orders.Store_ID = Store_Info.Store_ID WHERE (Service_Orders.SDate_Entered >= CONVERT(DATETIME, '" + sqlDate + "', 101)) ORDER BY Service_Orders.SDate_Entered DESC"
This retrurns 0 records.
sqlDate = 11/28/2005 12:23:27 AM from the function above.
The query will return records with :
sqlDate = "2005-11-01 21:56:20"
I tried changing the CONVERT(DATETIME, '" + sqlDate + "', 1XX from 100 to 120 with no luck
I know this must be an easy fix, but it is beyond me.
I need to know how to
1. convert my date to the dateformat from "11/28/2005 12:23:27 AM" to "2005-11-01 21:56:20"
or
2. find out how to use the CONVERT(DATETIME, '" + sqlDate + "', 1XX properly
Thanks for any help in advance!
Bill
Hi,
I have around 1000 records each with two dates in a database in MSDE on
my PC. I need to move the data to an on line SQL server and have
tried to use Microsoft Web Data Administrator to do this. I can
export the data from the MSDE to an SQL file but it will not import
because the date format in the SQL file is "dd,mm,yyyy".
If I export from either the MSDE or the SQL server both produce files
with date in the format "dd,mm,yy" and yet I cannot import either!?!
It is impractical to change all the dates by hand. I am on a
budget and do not have access to anything other than free software.
Can anyone advise me of the best way forward.
Thanks in anticipation.
Mike
I have a date string that is an integer 20040119 and I converted it to a varchar and then to date format-CONVERT(datetime, CAST(my_date AS varchar(8))) AS my_date
My result is 2003-12-31 00:00:00.000. How can I now format this string so I don't get the time string at the end?
Thanks
I hope I explain myself clear enough. I have an integer field of date values: 20031231. Some of the values in the field are zero. I want to convert the integer to 12/31/2003. Right now I am doing it with 2 views. The first view takes the zeros and converts them to null by using case. The second view uses convert to make it into the date string I want. Is there some way I can do it all in one view?
Thanks
Im sure we have all seen this error before:
"The value for the report parameter XXX is not valid for its type"
I have a report (RS 2005) that has 2 date parameters, "start" and "end".
My SQL in not very complicated at all, I have a simple WHERE date between @start and @end
But when I go to view the report in VS2005, I get the above error.
I am yet to find a decent fix for this, what is going on? the date I am trying is:
"26/02/2007" now, obviously its trying to us the en-US formatting, but im in Australia, so I want en-AU.
I have changed my report Language setting to be en-AU, my local settings in Region Setting is English (Australia). (BTW, I had to change the Language setting in my report through the XML, is there a better way to do this?)
How do I fix this?? I have searched an searched but no-one seems to be able to give a clear answer as to what is going on....
I want to for that format the date in YYYYMMDD and MMDDYY, with no '-' as data type is integer
I have used the following code (not the conversion function as I don€™t need Hyphen '-')
for YYYYDDMM
SET @DATE = CONVERT(INT,(CONVERT(VARCHAR(4),DATEPART(YYYY,GETDATE())) +
CONVERT(VARCHAR(4), DATEPART(MM,GETDATE())) +
CONVERT(VARCHAR(4), DATEPART(DD,GETDATE())) ))
& for MMDDYY
SET @DATEUS = CONVERT(INT,(CONVERT(VARCHAR(3),DATEPART(MM,GETDATE()))+
CONVERT(VARCHAR(3),DATEPART(DD,GETDATE())) +
SUBSTRING(CONVERT(VARCHAR(4), DATEPART(YY,GETDATE())),3,4) ))
I am getting the result
YYYYMMDD= 200688
MMDDYY =8806
but i want result in
YYYYDDMM = 20060808
MMDDYY = 080806
note: I need to convert in integer, finally, caz database data type is integer.
can any one give me solution
waiting for quick reply
regards,
Anas
I have written this ugly expression because I didn't know any other way. What I am trying to do is convert an English date string to a French string.
example
January 2005 ---> Janvier 2005
Thank you,
Pavel
=Switch(
Month(CDate(Fields!Month.Value) ) = 1, "Janvier" & " " & Year(CDate(Fields!Month.Value)),
Month(CDate(Fields!Month.Value) ) = 2, "Fevrier" & " " & Year(CDate(Fields!Month.Value)),
Month(CDate(Fields!Month.Value) ) = 3, "Mars" & " " & Year(CDate(Fields!Month.Value)),
Month(CDate(Fields!Month.Value) ) = 4, "Avril" & " " & Year(CDate(Fields!Month.Value)),
Month(CDate(Fields!Month.Value) ) = 5, "Mai" & " " & Year(CDate(Fields!Month.Value)),
Month(CDate(Fields!Month.Value) ) = 6, "Juin" & " " & Year(CDate(Fields!Month.Value)),
Month(CDate(Fields!Month.Value) ) = 7, "Juillet" & " " & Year(CDate(Fields!Month.Value)),
Month(CDate(Fields!Month.Value) ) = 8, "Aout" & " " & Year(CDate(Fields!Month.Value)),
Month(CDate(Fields!Month.Value) ) = 9, "September" & " " & Year(CDate(Fields!Month.Value)),
Month(CDate(Fields!Month.Value) ) = 10, "Octobre" & " " & Year(CDate(Fields!Month.Value)),
Month(CDate(Fields!Month.Value) ) = 11, "November" & " " & Year(CDate(Fields!Month.Value)),
Month(CDate(Fields!Month.Value) ) = 12, "December" & " " & Year(CDate(Fields!Month.Value))
)
Hello €“ I€™m developing a report that is using SSRS 2005 as the reporting software and Oracle as the database. The report contains a calendar control so that users can select a date range. (DateStart & DateEnd) However, the column that the report is querying against is not formatted as a date, but rather it is a number. (E.g. 12/10/2007 is 20071205 in the table)
I€™ve set up the report parameters with a data type of DateTime and then in the DataSet properties I€™m using the following values:
DateStart =RIGHT(Parameters!DateStart.Value, 4) & LEFT(Parameters!DateStart.Value, 2) & MID(Parameters!DateStart.Value, 4,2)
DateEnd =RIGHT(Parameters!DateEnd.Value, 4) & LEFT(Parameters!DateEnd.Value, 2) & MID(Parameters!DateEnd.Value,4,2)
Then, I€™m using the TO_NUMBER function in the SQL pane around each parameter.
The problem is, the calendar control is only sending a 1 byte number when the month and/or day is not 2 bytes. (E.g. 07/06/2007 is 7/6/2007, but I need to convert it to 20070706)
Does anyone have any suggestions for how to resolve this issue?
Thank you
Helen
I am trying to make a dropdownlist with a date. Where should I define
that I do want only the date, not the hour. So far it shows something
like "14-02-2006 0:00:00" whereas I just want "14-02=2006". I tried
"CAST(CONVERT (varchar(25); Ma_Fecha; 112) AS datetime)" in the SQL
Statement but it doesnt seem to work.[CODE]Dim sSQL As String = " SELECT "sSQL = sSQL & " Ma_Date,sDate "sSQL = sSQL & " FROM vwMareaMain "Dim comm As New SqlCommand(sSQL, objConn)Dim dataAdapter As New SqlDataAdapter(comm)dataAdapter.Fill(objDS2, "vwDate")Me.cboDate.DataMember = "vwDate"Me.cboDate.DataValueField = "Ma_Date"Me.cboDate.DataSource = objDS2.Tables("vwDate").DefaultView[/CODE]
Hello, I'm new to SQL Server, working for a non-profit computerizing alot of its data.I imported a table of people's names, birth dates, etc. into SS2005from Access, and the birth_date was imported as an Access date/timefield, giving it the datetime datatype in SQL.The column values look like:10/14/1964 12:00:00 AMWhere and how do I learn to specify that all fields like this should bein ISO format of yyyy-mm-dd??Do I have to create a new column and put all the dates into it??Should I just convert the data in queries/views??Use a constraint to format the data??I can redo the Access table if necessary, it is only 300-some rows.I tried BOL but it was not helpful...The end users will likely enter mm/dd/yy or mm/dd/yyyy and it will haveto be stored properly in the database table as column/fieldbirth_date...Thank you, Tom
View 11 Replies View RelatedHi All,
I am wondering how to achieve a running count on the rows being displayed in a table list. Not sure how to get it to show 1 for first row, 2 for second row, 3 for third row and so on. Example
No | Name
1 | John
2 | Jane
3 | Jim
I am also wondering on the date format in SSRS. When I try to format the date 10/31/2007 in a DD/MM/YYYY format it does not come out so good. Basically I go to the cell property and choose custom formatting, input the formatting string d/mm/yyyy but it only shows 31/00/2007. Can you guys tell me what I am doing wrong?
Thanks for the help.
Regards,
Fadzli
I need creating date of birth using ID number the ouput that im looking is a follows
e.g. RSA ID: 800101 (80 is year, 01 is month and 01 is day) that will be 1980 01 01
e.g. RSA ID: 000101 (00 is year, 01 is month and 01 is day) that will be 2000 01 01
The desired format I need is to take the above and create date of birth with the below format as required by the application used.
01 Jan 1980
01 Jan 2000
Select '"' + CAST( GETDATE() as varchar(100) ) + '"' as Obs_dt_1
I get this output---> "Apr 6 2015 4:07PM"
But what I really need is for it to show in this format---> "2015-04-06 16:08:05.317" .... How do I do the select ?
'17686568 - Bill Statement - 11/16/2006 - Stm. Date - 10/27/2006'
Above is the data string that I am trying to pull the information from. Here is the function I'm currently using:
cast(substring(c.itemname,charindex('Bill Statement - ',c.itemname)+18,10) as varchar)
...which gives me what i want most of the time, but beacuse the date is not equally formatted through out the database and the date can look like 5/4/2012 and using the above formula it will show up as 5/4/2012 -
So my question is how can i trim off the dash part when the data shows up like 5/4/2012 - ?
Running into an error [BC30205] and no values get colored using this syntax
=iif(DateDiff("d",Fields!Last_Reboot.Value,Now()) > 30 Â And DateDiff("d",Fields!Last_Reboot.Value,Now()) <= 59, "Orange", NOTHING),IIF(DateDiff("d",Fields!Last_Reboot.Value, Now()) >60, "Red",
NOTHING)
Please find below my query and result , how to display [Total Service Time ] in HH:Min format (Currently values in minutes)
Query:Â
SELECT Â DISTINCT Â dbo.sectn_dept.sectn_sc AS Customer,
MONTH(dbo.incident.date_logged) AS Month_Number, DATENAME(month,
dbo.incident.date_logged) AS Month, YEAR(dbo.incident.date_logged) AS Year,Â
dbo.incident.incident_ref PM_ref,
dbo.product.product_n "Product",
[Code] ....
 Â
Result:
Need to Display [Total Service Time] in below Format:
But Some values are repeating ....
In my SELECT query I have: MIN(a.orderdue) AS 'Oldest order date'
This works in that it brings through the oldest order date, however it brings through a date format like: 2015-06-11 11:30.000
So I amended the SELECT query to:
MIN (CONVERT(varchar(17),a.orderdue,103)) AS 'Oldest order date'
This brings the date through as 11/06/2015, which is preferable.
But I have noticed that doing this has affected the output: the MIN function no longer returns the first (oldest) date, but a completely different value.
Obviously my changing the formatting for the date has affected the MIN output. Is there any way I can amend the formatting of the date without this happening?
Hi All
I have seen several posts on this issue but as yet no answer. So i'm hoping that somewhere out there knows what the issue is.
SSIS package queries database creates MS spreadsheets per customer and then emails each customer their list.
Anyway all works fine apart from the fact that the Excel Destination Editor converts the date from uk to us format. My routine is already using an MS Excel template (correctly formatted) which it copies as part of the package.
Any ideas anyone?
rgds
HiI am using SQL 2005, VB 2005I am trying to insert a record using parameters using the following code as per MotLey suggestion and it works finestring insertSQL; insertSQL = "INSERT INTO Issue(ProjectID, TypeofEntryID, PriorityID ,Title, Area) VALUES (@ProjectID, @TypeofEntryID, @PriorityID ,@Title, @Area)"; cmdInsert SqlCommand; cmdInsert=new SqlCommand(insertSQL,conn); cmdInsert.Parameters.Add("@ProjectID",SqlDbType.Varchar).Value=ProjectID.Text; My query is how to detail with dates my previous code wasinsertSQL += "convert(datetime,'" + DateTime.Now.ToString("dd/MM/yy") + "',3), '";I tried the code below but the record doesn't save?string date = DateTime.Now.ToString("dd/MM/yy"); insertSQL = "INSERT INTO WorkFlow(IssueID, TaskID, TaskDone, Date ,StaffID) VALUES (@IDIssue, @IDTask, @TaskDone, convert(DateTime,@Date,3),@IDStaff)"; cmdInsert.Parameters.Add("IDIssue", SqlDbType.Int).Value = IDIssue.ToString();cmdInsert.Parameters.Add("IDTask",SqlDbType.Int).Value = IDTask.Text;cmdInsert.Parameters.Add("TaskDone",SqlDbType.VarChar).Value = TaskDoneTxtbox.Text;cmdInsert.Parameters.Add("Date",SqlDbType.DateTime).Value = date;cmdInsert.Parameters.Add("IDStaff",SqlDbType.Int).Value = IDStaff.Text;Could someone point to me in the right direction?Thanks in advance
View 3 Replies View RelatedHello all,I have a strange problem that i need some advice on. I have the following field called FILENO. It is a SQL 2000 field with the Data Type set to Char (7). The following sql statement works perfectly:SELECT TOP 1 RTRIM(FILENO) AS TEST, RIGHT(DATEPART(Yy, FILENOYEAR), 2) AS YEAR FROM tblRecordsWHERE RIGHT(DATEPART(Yy, FILENOYEAR), 2) = '05'ORDER BY FILENO DESCIt returns the correct data, 0050. Now, what i'm trying to do is add 1 to the value so i can get the next available number which is 0051. But, when i run the following sql statement, i get 51 instead of 0051.SELECT TOP 1 RTRIM(FILENO+1) AS TEST, RIGHT(DATEPART(Yy, FILENOYEAR), 2) AS YEAR FROM tblRecordsWHERE RIGHT(DATEPART(Yy, FILENOYEAR), 2) = '05'ORDER BY FILENO DESCDoes anyone have an idea how to solve this? Thanks.Richard M.
View 1 Replies View RelatedI'm working as a consultant for a project and I have been having constant issues with the in house "database guru" about stored procedure formating.
He insists I use a format similar to this:
create procedure getUser @UserId int = NULL
as
select
UserName
, UserPassword
, UserRole
from
Users
join
UserRole
on
User.ID = UserRole.ID
where
User.ID = @UserID
and
User.Active = 1
where as I prefer this format:
create procedure getUser
(
@UserId int = NULL
)
as
select UserName,
UserPassword,
UserRole
from Users
join UserRole on User.ID = UserRole.ID
where User.ID = @UserID
and User.Active = 1
Now normally I don't argue about style issues but I find his format confusing and it bothers me that it senselesly wastes lines make the stored procedure longer than necessary.
I'd love to get some comments on this issue or reference to any discussions on issues such as this.
Thanks
Hello -
Does anyone know why SQL Server Reporting Services formatts SQL weird? -- If I type a SQL statement in notepad or notepad++ and then paste it in Reporting Services it will change the whole structure and "expand" it out to three or four times its size.
Thanks
Adam
Hello All,
Is it possible to format an integer to a float value with 2 decimals in an sql query.
If yes, Please help?
I need to show my SUM of the 2 columns added in the query below formatted as currency. Is this possible?
SELECT SUM(QVSTDN + QVNONC) AS Total FROM INVOICE_TBL WHERE QVORDN = @QVORDN AND QVINV = @QVINV
I tried:
SELECT CONVERT(varchar(12), SUM(QVSTDN + QVNONC) , 1) AS Total FROM INVOICE_TBL WHERE QVORDN = @QVORDN AND QVINV = @QVINV
But this does not format it as currency. Any input would be helpful.