Date Parameter In Reports Manager
Sep 4, 2007
I have one master report and 4 linked reports. I deployed a report and set defaults for BeginDate and EndDate as =Today(). I have 4 linked reports that I need to change the date parameters for each. For instance the first linked reports needs to be BeginDate =Today() and the EndDate as =Today()+30. So in my linked report, I tried to change the EndDate to =Today()+30 and an error, 'The value provided for the report parameter 'BeginDate' is not valid for its type.'
So I can't put =Today() or =Today()+30 in the parameters once I override the defaults. Can someone tell me what I'm missing here?
Thanks, Iris
View 4 Replies
ADVERTISEMENT
Sep 11, 2006
Hi all,
I was wondering if there's a way to override the default date parameter of a report to a dynamic value such as Today(), Now(), DateAdd(),... through Report Manager.
I know this can be done in Report Designer, but never been successful when I try to change the date parameter value in Report Manager.
I've tried to change the date parameter value by clicking on the Override Default button in the report's properties page from Report Manager, error like the one below will be shown after I entered Now() in the Default Value field and clicked Apply:
The value provided for the report parameter 'StartDate' is not valid for its type. (rsReportParameterTypeMismatch)
Thanks in advance.
View 4 Replies
View Related
May 9, 2007
When runing a report in Report Manager I can click on an item and SQL Server provides the logic to drill down into the underlying tables. I can find no button to go back. The only way I've found to go back is to click a different tab at the top of the screen (History or something) then click View again and you get the original report. In designer there's a back button. Is there not such a button when running a saved report????
Thanks.
View 1 Replies
View Related
Mar 28, 2007
When we move reports from one folder to another in Report Manager we have to delete the report in the destination folder first before moving it over if a version is already there. If not we get the error that an item with that name already exists. Is there a way around this? Is there a setting which will allow over-write of a report?
View 1 Replies
View Related
Feb 1, 2007
Hi..
I have deployed reports on to the report server. When I try to open the reports from report server, I get the error," Value does not fall within the expected range." This error message appears as soon as I click on any report on the report manager.
I am not able to find the cause of the error.
Does anybody have any suggestions?
Thanks ,
Viva
View 4 Replies
View Related
Apr 28, 2008
Hello all,
When I print the reports ( or export to PDF) in Report Manager, my every alternate page is blank? If the report is just one page report, I get second page as blank when I print or export. The report prints in Landscape format( which should be fine given 8.5 inch height and 11 inch width).
I have played with the interactive Height and other height parameters but with no luck.
My current settings in the rdl file is:
<BottomMargin>0.5in</BottomMargin>
<RightMargin>0.5in</RightMargin>
<PageWidth>11in</PageWidth>
...
<Width>11in</Width>
<InteractiveHeight>1.5in</InteractiveHeight>
<Language>en-US</Language>
<TopMargin>0.5in</TopMargin>
<PageHeight>8.5in</PageHeight>
I would highly appreciate any suggestions.
Thanks
Phewa Taal
View 1 Replies
View Related
May 21, 2006
Hi,
I'm getting blank page when I open the Report Manager: I've got a header - "...Reporting... HOME", and then just empty space.
I had it working fine a week ago. Any ideas?
The RS runs on Win2003 Std, SQL 2005 Std.
Thanks
View 26 Replies
View Related
Aug 31, 2007
How do you stop anyone from the outside world from viewing the report manager?
From typing eg( www.mywebaspreportapp.com/Reports) and directly accessing the report manager?
Is there a security step i missed somewhere?
View 2 Replies
View Related
Oct 15, 2007
Hi,
I have parameters in my report. The user can choose the year, month and date (3 parameters).
Now I want to set default vaules for the parameters , so that the user sees the report for example for the current day without selecting the parameters. I tried to set the type of the parameters to DateTime and the default value for example for the year to "=Today().Year" . But when I execute the report an error occures . Something like : no validValue for this parameter.
My Attributes for the year month and date are from an Analyis Services Cube from a Server Time dimension .
Does somebody know how to make it possible to set default values for this parameters?
Other question :
Does somebody know how I can reduce the values for a parameter. For Example I have a parameter "year" from a server time dimension from a cube. The values which are available are "Year 2004", "Year 2005", "Year 2006", "Year 2007".
But I want that the user only can choose "Year 2006" or "Year 2007" ant not every Year or "All".
Or Other Example: The User should only choose a Date that is int the past or Today but not a Date in the future.
Thanks !
JF
View 7 Replies
View Related
Apr 4, 2008
IS there a way to do this?
I want everything on one page, no matter how long it is.
View 1 Replies
View Related
Mar 21, 2007
Hello, I need to be able to view and save reports using Report Manager. However, I do not want some users the ability to upload files (need to prevent virus or bad files). It appears I need to select manage reports from the role definition in order for a user to save reports. but then i get the upload file link as well. Is there a way to manage reports but prevent upload file link?
View 2 Replies
View Related
May 6, 2008
Hi,
I would like to restrict users to allow to view related reports only...
like i have 2 users..with 4 reports
1 user can see only two reports
2 user can see only another two reports
how can i do this by SSRS???
Can i do by using Configure item-level role definitions in seetings link..
or is thr any another way to do this?
Pls reply back
Regards,
Maruthi..
View 4 Replies
View Related
Dec 20, 2007
what is MS's strategy for having two off the shelf ways of getting at reports? In a typical company, is the average non administrator type user getting at his reports via one, the other, both?
View 1 Replies
View Related
May 14, 2008
I'm having a strange problem with SSRS 2005 that I'm hoping someone might be able to help with. I've reinstalled SSRS (multiple times) and even reinstalled IIS hoping to resolve the problem, but it still exists.
The problem is that trying to view a report via Report Manager is failing. All other operations within Report Manager work fine (browsing folders and report lists, viewing folder and report properties, changing properties, setting permissions, etc.) Only trying to view reports fails. Whenever I try to view a report, I get the following error:
The request failed with HTTP status 401: Access Denied.
I can view reports via other methods just fine. For example, if I browse to the http://localhost/reportserver URL directly, I can view any report just fine. And if I connect to SSRS via SSMS, I can view reports there as well. I believe that both of those methods use a direct reportserver URL versus using the http://localhost/Reports/Pages/Report.aspx page within the Report Manager virtual directory.
Here's a bit of configuration information that may or may not be helpful to someone:
1. This is on a laptop running Windows XP SP2 (32-bit). SSRS (and all SQL Server components) are installed as default instances and SQL Server SP2 has been applied to everything.
2. All of the latest updates and fixes for Windows, SQL Server, Office, etc. have been installed via Windows Update.
3. This laptop is a member of a domain, but I am typically not connected to the domain (not in the office very often). I am, however, logging into the laptop using a domain account (with cached credentials). Local user accounts are frowned on by the domain and IT administrators involved (except for running local services). My domain account has full admin permissions within Windows and within SQL everywhere.
4. As far as I can tell, everything with regards to IIS, asp.net, and SSRS are configured correctly (ASPNET account seems to be set up correctly, all SQL services including the SSRS service are running under a local account with admin permissions, the Reports and ReportServer virtual directories in IIS are set to use Integrated Security, etc.)
I'm not an expert on SSRS, so this one has me stumped. I've reviewed all of the config files that I can think of looking at for SSRS and I've looked at the SSRS logs. Nothing really jumps out at me in terms of changes that might be required (and the SSRS logs don't really say much other than repeating the error). For example, I see the following lines in the ReportServerWebApp__xxx.log file:
aspnet_wp!ui!8!5/14/2008-13:00:17:: e ERROR: The request failed with HTTP status 401: Access Denied.
aspnet_wp!ui!8!5/14/2008-13:00:17:: e ERROR: HTTP status code --> 500
-------Details--------
System.Net.WebException: The request failed with HTTP status 401: Access Denied.
Anyone have any ideas? I've searched Google for quite a while trying to find something that would help me figure this out, but thus far I've not been able to come up with anything. Any help (or pointers to something on teh web somewhere that I might have missed) would be appreciated!!
Dave Fackler
View 5 Replies
View Related
Oct 4, 2007
Hi everyone, I am working with SSRS 2000, and I have 2 reports that are linked with a hyperlink. Well, one is the report with all the data (numbers, months, etc) and the second one is a Chart with all the information. Well, both have a parameter, that prompts the part #. I want to know, how can I get both reports to run with one parameter only. For example, the first report with the data, fill in the parameter (part#), and when click on the hyperlink to have the Chart (second report) automatically fill in the part # that was typed in the first report so it can display the information. I know excell does it, but how can I do this with SSRS?
Thanks a bunch,
Abner
View 1 Replies
View Related
Jul 24, 2007
I am having report parameter end date I am showing the default value "5/21/2007 11:59:59 PM" in the end date paramter. And also I want to show date time format "(MM/DD/YYYY HH:MMS)" in the right hand side of the parameter. How to do this?
Thank You
View 1 Replies
View Related
Apr 25, 2007
Hi,
I am new at using Report Service and after successful install the SQL SERVER EXPRESS ADVANCE SP2 and configured the ReportIing Services Configuration. I try to launch the report manager by typing http://localhost/Reports I get the following error:
The report server is not responding. Verify that the report server is running and can be accessed from this computer.
I've read many forums but I couldn't resolve my problem. Any help would be greatly appreciated.
By the way, I am running IIS 7 on Window Vista Business Ed. & SQL Server Express Ed. I am not sure if this make any differences.
View 5 Replies
View Related
Sep 14, 2007
I've tried changing the default zoom setting by editing the RSReportServer.config file to include
<Configuration>
<DeviceInfo>
<Zoom>Page Width</Zoom>
</DeviceInfo>
</Configuration>
under the
<Render>
<Extension Name = "HTML4.0" etc.
However, all reports still show up with the zoom setting at 100% on the toolbar.
I stop and restart the Report Server Service and it comes up OK so I know my XML syntax is cool. What am I doing wrong?
This is on a 2005 Report Server. Reports are built in VS2005 Report Designer and deployed to the Report Server directly. Reports are accessed via IE7 browser.
View 2 Replies
View Related
Aug 11, 2013
Date parameter. I created a report that allows a drop down for a date range to be selected. However, whenever I preview the report, I get an error. I know my error stems from my date fields being in this format "201301" , and the "date/ time" in SSRS being mm/dd/yyyy on the drop down calendar in SSRS.
I know the direction I want to go in, but just a little confused on where would I use the convert or cast function. Would it be in the data parameter itself, or a part of the query before the @start date and @End date?
View 18 Replies
View Related
Sep 27, 2007
Hi,
I have bunch of reports that take same set of parameters. I am trying parametrize the report type so that depending on the report type selected, body should display that report when user hits "View report" button. How can I do this? Pardon me if there is an obvious solution as I am pretty new to the joys of MS Reporting Services.
Thanks a bunch.
View 1 Replies
View Related
Nov 13, 2007
Hi all,
Is it possible to generate mulitple reports from parameter? what I want is for example: I have a report with a sales orders table, it has 2 input parameter fields; two dates to make up a date range. If the date range is between yesterday and today, I will get two reports (two reports with two different total page number); one is for yesterday and one is for today.
I did some research on resetting the total page, but their solution doesnt work on my special case (very complicate..). A similiar work out also apperciate.
Regards,
Bryan
View 3 Replies
View Related
Mar 29, 2007
We have timed-based subscriptions set up for our standard set of 10 client
reports which run monthly with the appropriate parameters set for each
of our clients. Our management has requested that we provide them with
the ability to run the set of 10 reports together at will. So we would
provide the client parameter and all 10 reports would be generated.
What is the recommended approach to accomplish this? We are using Sql
Server 2005, Visual Studio 2003 and .Net 2.0.
View 1 Replies
View Related
Aug 13, 2007
I've seen some theads on this but cant seem to get this right. Report A has 5 parameters 2 of them are multi value-- when I click on part of Report A I want to jump to report B and pass all parameter values from report A. The single value ones work but multi value only passes on value and not all values selected-- what am I missing here? Do I need to pass the values in the multi value parameters in an array??
thanks
k
View 1 Replies
View Related
Nov 21, 2007
Hi,
I tried to create parameters in my report. I need one date picker. So i select data type as datetime. in default values i selected as non-queried and in date time functions i selected =Today. But am unable to set current date. Please help me to solve it.
Regards
Nataraj.C
View 2 Replies
View Related
Jul 20, 2005
I would like to pass an unique identifier (UserID) to a Crystal Reportfrom a SQL stored procedure. I found an article from Business Objectsabout this issue, but I couldn't get my head around it's hard codedexample.Does anyone have an example of this? Would I need to also create aparameter in my Crystal Report?Help appreciated.Steve*** Sent via Developersdex http://www.developersdex.com ***Don't just participate in USENET...get rewarded for it!
View 1 Replies
View Related
Sep 11, 2007
Under My Subscriptions I have a report that runs daily. This report allows me to select certain items from a dropdown in parameter fields or select all. Some days the report fails and I get the follow error: The subscription contains parameter values that are not valid. When I click Edit to review, the parameter field is blank and my selections have been unselected. This report has several parameter fields but only only one or two of the parameter fields are blank, the others are ok.
View 4 Replies
View Related
Oct 26, 2007
Is there a way to set the default so that the parameter area is displayed by default when running a report in Report Manager. Currently you have to go up and hit the arrows to open the parameter area. I'd like it to be open by default.
Thanks.
View 2 Replies
View Related
Jan 24, 2008
Hello,
I am using the calender parameter and I need to convert my data date format to the one that matched that is returned on selecting a date from this calender. Can you show me what this format is.
how can I convert my existing date format to this format. The existing date format is 2007-07-26 21:27:13.000
thank you
Kiran
View 5 Replies
View Related
Jul 23, 2015
I am working into a t-sql where i need to expand the date within a date parameter. For example:
Start Date = '1/1/2014'
End Date = '12/31/2014'
I want to expand this as:
01/2014
02/2014
03/2014
04/2014
05/2014
06/2014
up to
12/2014
View 4 Replies
View Related
May 11, 2008
How to pass master reports (fields!OrderId) value to a subreport as a parameter value.
if i right click the subreport control on the main report layout, i do see parameters tab, under that would like to pass the (fields!orderID).
Thanks for the info.
View 4 Replies
View Related
Sep 15, 2015
I'm trying to create a report that will be data-driven and produce multiple reports based on a parameter. For example, 5 reports go out today based on invoice numbers from yesterday. Each invoice can have multiple trasnsaction lines and each line contains the invoice number. What I have so far is only taking the first invoice number (let's say it has 10 transactions) and sending me the same report 10 times and stopping.
I get nothing for the remaining 4 invoices/reports. Here is what I have. To me this should enter the distinct invoice no's from yesterday into #temp, while a invoice no exiists begin query with one invoice selected from #temp then delete that invoice no and select another one and repeat till no more invoice no's. But it's only going through the one invoice no.
select distinct InvoiceNo
into #temp
from table
where Invoicedate between getdate()-1 and getdate()
declare @InvoiceNo VARCHAR(25)
[Code] ....
View 0 Replies
View Related
Aug 13, 2007
Hi,
Reports created in BIDS/ Report Builder in SQL Server 2005 has the following date format:
MM/DD/YYYY 12:00:00: AM
eg: 5/26/2007 12:00:00 AM
Is it possible to create a format in SSRS (similar to the Friendly-Date format in SSAS) such that we can get date format like:
5/26/2007
Any help is appreciated.
Thanks,
Sundar
View 6 Replies
View Related
Apr 3, 2008
I have a problem with the dates and "datetime" picker in my report (sqlserver 2005 sp2).
My reginal settings on the server are: "hebrew" - "Isreal".
I have a report with a datetime picker.
If I'm opening the report from: http://myserver/REPORTSERVER and I'm writting in the datepicker textbox the value "01/04/2008", and then click on the calander icon it opens on the on the 4th of january 2008.
If I'm opening the report from: http://myserver/REPORTS and I'm writting in the datepicker textbox the value "01/04/2008", and then click on the calander icon it opens on the on the 1th of april 2008.
Does anybody know this bug and how to wotk with it?
Thanks.
View 3 Replies
View Related
