Date Picker Formatting
Feb 27, 2007
Im sure we have all seen this error before:
"The value for the report parameter XXX is not valid for its type"
I have a report (RS 2005) that has 2 date parameters, "start" and "end".
My SQL in not very complicated at all, I have a simple WHERE date between @start and @end
But when I go to view the report in VS2005, I get the above error.
I am yet to find a decent fix for this, what is going on? the date I am trying is:
"26/02/2007" now, obviously its trying to us the en-US formatting, but im in Australia, so I want en-AU.
I have changed my report Language setting to be en-AU, my local settings in Region Setting is English (Australia). (BTW, I had to change the Language setting in my report through the XML, is there a better way to do this?)
How do I fix this?? I have searched an searched but no-one seems to be able to give a clear answer as to what is going on....
View 3 Replies
ADVERTISEMENT
Sep 5, 2007
Dear Expert!
A server with SQL 2005 sp2, Reporting Services and Sharepoint services (ver 3.0) (in integrated mode) gives an odd error. When viewing a Reporting Services report with a Date Time Picker, the date chosen is wrong. The preferred setting is Danish with the date format dd-mm-yyyy. The date picker shows the months in Danish but when selecting a date, and clicking on the Apply-button, the date reformats to US (mm-dd-yyyy).
Example:
When choosing 5th of September 2007 and clicking apply, it shows in the picker, 9th of May 2007.
When choosing 26th of September 2007 and clicking apply, it shows, again in US format, the RIGHT date but adds a timestamp €œ12:00 AM€? in the end, making further enquiries to fail.
The report itself receives the right date and shows correctly. The only case it fails is, when the time stamp appears.
The server is a 32-bit one with 4 GB RAM. A testserver with identical collation on the Reportserver database cannot recreate the error. The site containing the reports has been set to Danish in the regional settings. To Reinstall is not an option.
The test report has no database connection whatsoever.
When setting the site to US, the timestamp won€™t appear at all.
The server has been restarted and the installation procedure was of the simple kind. No special tweaks at all.
Any advice would be greatly appreciated.
Kind Regards
Johan Rastenberger
View 1 Replies
View Related
Apr 10, 2008
I am using reporting services, when I go to view my report in Report Manager (web browser is IE7), I choose a date from a date picker control, and the date that populates the date field is in US format mm/dd/yyyy, however in my regional settings, although I have English(United States) I have altered my short date format to be dd/mm/yyyy.
Currently my report will display an error saying the date is an invalid format if I pick a date that violates the mm/dd/yyyy format. I want it to display the date format that I have defined in my regional settings, without modifying the 'Language Preference' settings for IE.
The report properties has =User!Language for the 'Language' property.
Does anyone have any suggestions?
View 1 Replies
View Related
Nov 21, 2007
Hi,
I tried to create parameters in my report. I need one date picker. So i select data type as datetime. in default values i selected as non-queried and in date time functions i selected =Today. But am unable to set current date. Please help me to solve it.
Regards
Nataraj.C
View 2 Replies
View Related
Oct 24, 2007
Any way to disable the calendar datepicker show it does not even show up on the report?
View 2 Replies
View Related
Jul 26, 2007
Have seen other questions here about modifying date pickers supplied by reports created in BIDS. The answer is usually NO. But this does not involve a format change, simply want to limit say to a specific year.
Any ideas?
View 4 Replies
View Related
Jun 13, 2007
hi all,
i've just updated my sql server 2005 with sp1 and sp2.
i want my report date format to change according to regional setting, therefore i've set the report property for language as User.Language.
how do i set the report parameter of type datetime to follow the format of regional setting?
my date parameter has default value which i query from a table.
for e.g. if my regional setting is UK and the default date is 9/7/2006, the date picker will display date at 7 september 2006 instead.
please help.... thanks!
View 5 Replies
View Related
May 29, 2007
I created a report with two parameters, StartDate and EndDate.
They are specified as datetime type.
When I went to the Preview tab, there were date pickers for both values.
After a week or so of using the report, I thought it would be better if I gave the parameters default values. I spent some time reading what others had done in this forum and used the following as the expressions for the parameters:
Code Snippet
=IIF(Weekday(Today()) =1, FormatDateTime(Today(),2),
IIF(Weekday(Today()) =2, FormatDateTime(Today.AddDays(-1),2),
IIF(Weekday(Today()) =3, FormatDateTime(Today.AddDays(-2),2),
IIF(Weekday(Today()) =4, FormatDateTime(Today.AddDays(-3),2),
IIF(Weekday(Today()) =5, FormatDateTime(Today.AddDays(-4),2),
IIF(Weekday(Today()) =6, FormatDateTime(Today.AddDays(-5),2), FormatDateTime(Today.AddDays(-6),2)))))))
=IIF(Weekday(Today()) =1, FormatDateTime(Today.AddDays(6),2),
IIF(Weekday(Today()) =2, FormatDateTime(Today.AddDays(5),2),
IIF(Weekday(Today()) =3, FormatDateTime(Today.AddDays(4),2),
IIF(Weekday(Today()) =4, FormatDateTime(Today.AddDays(3),2),
IIF(Weekday(Today()) =5, FormatDateTime(Today.AddDays(2),2),
IIF(Weekday(Today()) =6, FormatDateTime(Today.AddDays(1),2), FormatDateTime(Today(),2)))))))
and now, there are no date pickers. I am curious. Why are they gone? Can I get them back and still have my default values?
Thanks,
IanO
View 5 Replies
View Related
May 8, 2007
I am sure others have ran into this issue.
But I need to have date parameters using the datetime type and I need to be able to pass the correct value to the MDX.
View 1 Replies
View Related
Apr 11, 2007
Updated SQL 2005 to SP2 and Reporting Services Date Picker now has dates defaulting to US format (MM/DD/YYYY) instead of our previous English-Australian (DD/MM/YYYY). Both the clients and server are set to English Australian regional settings in the O/S and the reports are composed for English Australian language. Reports have correct format in Visual Studio development and re-deploying them had no effect. Everything was fine under SP1 - not sure what is going on. Any ideas???
View 4 Replies
View Related
Feb 3, 2008
hi.
i have created a database with a table called customer. hav a field which displays the date. how can i add a query on the date picker so that when i choose a date on the calendar i can view the customers details. in other display the record by choosing a particular date.
thx.
View 9 Replies
View Related
Jun 15, 2007
I read a lot of posts in this forum, but none of them provide a solution.
Probably it is related to SP2 as many report, I have SP2 as well...
A funny situation:
I have a report parameter @date, datatype datetime, so I can use the datepicker control.
But, even when not using this @date parameter in my dataset, I still get the error:
The value provided for the report parameter 'date' is not valid for its type. (rsReportParameterTypeMismatch)
Of course it has to do with regional settings and languages etc... But at my international client's site, workstations are in any regional setting and servers are in en-US, nothing I can do about that.
Come'on Microsoft, don't tell us this datePicker is only for the US market?
View 1 Replies
View Related
Mar 20, 2012
I have a date range parameters in my report, and when viewing it using IE and Firefox ReportViewer, the date picker is there. But when I tried running it using Chrome, the date picker was missing. I tried double click on the date field itself but nothing.
My Chrome version is 17.0.963.79 m. I tried allowing the pop-up blocker but still nothing.
View 12 Replies
View Related
Aug 24, 2015
SSRS Date Picker is not working in Google Chrome, it works in both IE and Firefox.
View 3 Replies
View Related
Apr 3, 2008
Hi,
Does anyone have a workaround or know of a fix to this problem:
Default value set to 'date pick' from date currently within field by setting value equal to that field . ie if date is 01/01/2010 date picker opens in Jan 2010 - works ok.
However, once published to Sharepoint and run through browser the Date Picker ignores the default value and the date picker opens for today. ie April 2008.
Any words of wisdom gratefully recieved,
Howard Stiles
View 1 Replies
View Related
Jul 6, 2015
A date field in a report returns the date value as:
2015-07-01 13:30:27.000
Is there any way I can script this to appear as:
01 July 2015 (or 01-07-2015 or 01/07/2015)Â - basically to cut out the hours, minutes and seconds?
The best I have managed is: CONVERT (varchar(17),DATE,113) AS Date1 but this still leaves me with:
01 July 2015 13:30
View 9 Replies
View Related
May 2, 2008
Hi,I need a way of changing the following SQL statement so that the dates are without the hh:mm:ss tt:"Select DISTINCT([StartDate]) From [Events]"How can this be done?Thanks,Curt.
View 4 Replies
View Related
Oct 10, 2001
I'm currently getting a date in this format 2001-10-08 10:35:45
(yyyy-mm-dd hh:mm:ss) how would I convert the date to this format
2001-10-08/10:35:45 (yyyy-mm-dd/hh:mm:ss)? The only thing added was the / between the date and time.
Thanks in advance,
Ed
View 2 Replies
View Related
Aug 6, 2004
Hi,
I need to know how i can format the date so that the query results will come out as the format mm/dd/yy hh:mm:ss?
Thanks alot.
View 1 Replies
View Related
Mar 7, 2008
Hello everyone,
I have a date field called book_flag_date of varchar data type.
The values in the table look like this:
3/4/2008 14:32:59
OR
3/4/2008 14:9:0
The issue arises when I am ordering by. I want the value
3/4/2008 14:9:0 to format to 3/4/2008 14:09:00
Thank you very much for your help.
View 7 Replies
View Related
Sep 27, 2007
I am trying to format a date value as XX/XX/XX when I place a "d" in the format property it formats it as XX/XX/XXXX any ideas on how to change it to XX/XX/XX?
thanks in advance
View 1 Replies
View Related
May 25, 2007
How can I format the current date as yyyy-mm-dd and display it in a text box on the report. The FormatDateTime function only allows certain NamedFormat for the short and long dates but does not satisfy the above requirements. Any ideas?
View 3 Replies
View Related
Feb 13, 2007
My problem is with the paramater format date.
My code and data in SQL are showing the date correctly as dd/mm/yyyy.
When I run report in SSRS a couple of columns show the date mm/dd/yyyy.
The format option in all cells are set to 'd'. There is no difference between the properties on these cells.
The dates themselves seem to go wrong on the date "31/12/4000" and returns them as "12/31/4000".
Any help wqould be appreciated
View 1 Replies
View Related
Jan 24, 2008
Helo All -
I would greatly appreciate some help formatting the values for my sproc.
I need to call a sproc and pass it the values StartTime and EndTime from a web form. The web form uses 3 DDLs for the Start Hour, Start Minute and Start AM/PM as well as 3 DDLs for the End Hour, End Minute and End AM/PM.
When I call the sproc, I get the error:
SqlDateTime overflow. Must be between 1/1/1753 12:00:00 AM and 12/31/9999 11:59:59 PM.
Here is the sample column data: 2:06 PM which is stored as nvarchar in the sql db
Here is the Sub and the Sproc,
Sub Protected Sub btnDateQuery_Click(ByVal sender As Object, ByVal e As System.EventArgs) Handles btnDateQuery.Click
pnlFiltered.Visible = True
pnlShowAll.Visible = FalseDim StartTime As DateTime
Dim EndTime As DateTimeStartTime = ddlFromHour.SelectedValue + ":" + ddlFromMinute.SelectedValue + ":" + "00 " + ddlFromAMPM.SelectedValue
EndTime = ddlToHour.SelectedValue + ":" + ddlToMinute.SelectedValue + ":" + "00 " + ddlToAMPM.SelectedValueStartTime = CDate("2:07:00 AM")
EndTime = CDate("2:07:00 AM")Dim Query_TA As New dalDataFeedsdefsTableAdapters.spFilterExpectedEndTimeTableAdapterDim returncode As Integer = 0
Query_TA.GetExpectedEndTimeData(StartTime, EndTime)
Dim Select_TA As New dalDataFeedsdefsTableAdapters.spDynamic_Basics_TblTableAdapterDim dv As New DataView
Try
dv = Query_TA.GetExpectedEndTimeData(StartTime, EndTime).DefaultView()Catch ex As Exception
Response.Write(StartTime + " - " + EndTime)
End TryWith DataFeedGridView
.DataSource = dv
.DataBind()
End With
End Sub
SPROC ALTER PROCEDURE [dbo].[spFilterExpectedEndTime]
-- Add the parameters for the stored procedure here
@StartTime datetime,@EndTime datetime
AS
BEGIN
-- SET NOCOUNT ON added to prevent extra result sets from
-- interfering with SELECT statements.
SET NOCOUNT ON;
-- Insert statements for procedure here
select * From tmpBasics
where convert(datetime, ltrim(rtrim(starttime)), 114) >= @StartTime and dateadd(mi,convert(int, duration), convert(datetime, ltrim(rtrim(starttime)), 114)) <= @EndTime
order by convert(datetime, ltrim(rtrim(starttime)), 114)
END
Thanks,
Pat
View 1 Replies
View Related
Dec 5, 2005
I converted an Access Database to SQL Express. The dates were converted to datetime
I'm using VWD 2005
Here is the source of my date and the query.
sqlDate = (DateTime.Now.AddDays(-7))
sqlTxt = "SELECT Service_Orders.SStore_Assigned_Number, Store_Info.Store_Other, Service_Orders.PO_Number, Service_Orders.SWorkType, Service_Orders.Service_Order_Number, Service_Orders.SDate_Entered, Service_Orders.SContact, Service_Orders.SClosed FROM Service_Orders INNER JOIN Store_Info ON Service_Orders.Store_ID = Store_Info.Store_ID WHERE (Service_Orders.SDate_Entered >= CONVERT(DATETIME, '" + sqlDate + "', 101)) ORDER BY Service_Orders.SDate_Entered DESC"
This retrurns 0 records.
sqlDate = 11/28/2005 12:23:27 AM from the function above.
The query will return records with :
sqlDate = "2005-11-01 21:56:20"
I tried changing the CONVERT(DATETIME, '" + sqlDate + "', 1XX from 100 to 120 with no luck
I know this must be an easy fix, but it is beyond me.
I need to know how to
1. convert my date to the dateformat from "11/28/2005 12:23:27 AM" to "2005-11-01 21:56:20"
or
2. find out how to use the CONVERT(DATETIME, '" + sqlDate + "', 1XX properly
Thanks for any help in advance!
Bill
View 2 Replies
View Related
Jan 30, 2006
Hi,
I have around 1000 records each with two dates in a database in MSDE on
my PC. I need to move the data to an on line SQL server and have
tried to use Microsoft Web Data Administrator to do this. I can
export the data from the MSDE to an SQL file but it will not import
because the date format in the SQL file is "dd,mm,yyyy".
If I export from either the MSDE or the SQL server both produce files
with date in the format "dd,mm,yy" and yet I cannot import either!?!
It is impractical to change all the dates by hand. I am on a
budget and do not have access to anything other than free software.
Can anyone advise me of the best way forward.
Thanks in anticipation.
Mike
View 8 Replies
View Related
Jan 19, 2004
I have a date string that is an integer 20040119 and I converted it to a varchar and then to date format-CONVERT(datetime, CAST(my_date AS varchar(8))) AS my_date
My result is 2003-12-31 00:00:00.000. How can I now format this string so I don't get the time string at the end?
Thanks
View 12 Replies
View Related
Jan 20, 2004
I hope I explain myself clear enough. I have an integer field of date values: 20031231. Some of the values in the field are zero. I want to convert the integer to 12/31/2003. Right now I am doing it with 2 views. The first view takes the zeros and converts them to null by using case. The second view uses convert to make it into the date string I want. Is there some way I can do it all in one view?
Thanks
View 14 Replies
View Related
Aug 8, 2006
I want to for that format the date in YYYYMMDD and MMDDYY, with no '-' as data type is integer
I have used the following code (not the conversion function as I don€™t need Hyphen '-')
for YYYYDDMM
SET @DATE = CONVERT(INT,(CONVERT(VARCHAR(4),DATEPART(YYYY,GETDATE())) +
CONVERT(VARCHAR(4), DATEPART(MM,GETDATE())) +
CONVERT(VARCHAR(4), DATEPART(DD,GETDATE())) ))
& for MMDDYY
SET @DATEUS = CONVERT(INT,(CONVERT(VARCHAR(3),DATEPART(MM,GETDATE()))+
CONVERT(VARCHAR(3),DATEPART(DD,GETDATE())) +
SUBSTRING(CONVERT(VARCHAR(4), DATEPART(YY,GETDATE())),3,4) ))
I am getting the result
YYYYMMDD= 200688
MMDDYY =8806
but i want result in
YYYYDDMM = 20060808
MMDDYY = 080806
note: I need to convert in integer, finally, caz database data type is integer.
can any one give me solution
waiting for quick reply
regards,
Anas
View 3 Replies
View Related
May 31, 2007
I have written this ugly expression because I didn't know any other way. What I am trying to do is convert an English date string to a French string.
example
January 2005 ---> Janvier 2005
Thank you,
Pavel
=Switch(
Month(CDate(Fields!Month.Value) ) = 1, "Janvier" & " " & Year(CDate(Fields!Month.Value)),
Month(CDate(Fields!Month.Value) ) = 2, "Fevrier" & " " & Year(CDate(Fields!Month.Value)),
Month(CDate(Fields!Month.Value) ) = 3, "Mars" & " " & Year(CDate(Fields!Month.Value)),
Month(CDate(Fields!Month.Value) ) = 4, "Avril" & " " & Year(CDate(Fields!Month.Value)),
Month(CDate(Fields!Month.Value) ) = 5, "Mai" & " " & Year(CDate(Fields!Month.Value)),
Month(CDate(Fields!Month.Value) ) = 6, "Juin" & " " & Year(CDate(Fields!Month.Value)),
Month(CDate(Fields!Month.Value) ) = 7, "Juillet" & " " & Year(CDate(Fields!Month.Value)),
Month(CDate(Fields!Month.Value) ) = 8, "Aout" & " " & Year(CDate(Fields!Month.Value)),
Month(CDate(Fields!Month.Value) ) = 9, "September" & " " & Year(CDate(Fields!Month.Value)),
Month(CDate(Fields!Month.Value) ) = 10, "Octobre" & " " & Year(CDate(Fields!Month.Value)),
Month(CDate(Fields!Month.Value) ) = 11, "November" & " " & Year(CDate(Fields!Month.Value)),
Month(CDate(Fields!Month.Value) ) = 12, "December" & " " & Year(CDate(Fields!Month.Value))
)
View 2 Replies
View Related
Dec 10, 2007
Hello €“ I€™m developing a report that is using SSRS 2005 as the reporting software and Oracle as the database. The report contains a calendar control so that users can select a date range. (DateStart & DateEnd) However, the column that the report is querying against is not formatted as a date, but rather it is a number. (E.g. 12/10/2007 is 20071205 in the table)
I€™ve set up the report parameters with a data type of DateTime and then in the DataSet properties I€™m using the following values:
DateStart =RIGHT(Parameters!DateStart.Value, 4) & LEFT(Parameters!DateStart.Value, 2) & MID(Parameters!DateStart.Value, 4,2)
DateEnd =RIGHT(Parameters!DateEnd.Value, 4) & LEFT(Parameters!DateEnd.Value, 2) & MID(Parameters!DateEnd.Value,4,2)
Then, I€™m using the TO_NUMBER function in the SQL pane around each parameter.
The problem is, the calendar control is only sending a 1 byte number when the month and/or day is not 2 bytes. (E.g. 07/06/2007 is 7/6/2007, but I need to convert it to 20070706)
Does anyone have any suggestions for how to resolve this issue?
Thank you
Helen
View 3 Replies
View Related
Feb 14, 2006
I am trying to make a dropdownlist with a date. Where should I define
that I do want only the date, not the hour. So far it shows something
like "14-02-2006 0:00:00" whereas I just want "14-02=2006". I tried
"CAST(CONVERT (varchar(25); Ma_Fecha; 112) AS datetime)" in the SQL
Statement but it doesnt seem to work.[CODE]Dim sSQL As String = " SELECT "sSQL = sSQL & " Ma_Date,sDate "sSQL = sSQL & " FROM vwMareaMain "Dim comm As New SqlCommand(sSQL, objConn)Dim dataAdapter As New SqlDataAdapter(comm)dataAdapter.Fill(objDS2, "vwDate")Me.cboDate.DataMember = "vwDate"Me.cboDate.DataValueField = "Ma_Date"Me.cboDate.DataSource = objDS2.Tables("vwDate").DefaultView[/CODE]
View 2 Replies
View Related
Sep 16, 2006
Hello, I'm new to SQL Server, working for a non-profit computerizing alot of its data.I imported a table of people's names, birth dates, etc. into SS2005from Access, and the birth_date was imported as an Access date/timefield, giving it the datetime datatype in SQL.The column values look like:10/14/1964 12:00:00 AMWhere and how do I learn to specify that all fields like this should bein ISO format of yyyy-mm-dd??Do I have to create a new column and put all the dates into it??Should I just convert the data in queries/views??Use a constraint to format the data??I can redo the Access table if necessary, it is only 300-some rows.I tried BOL but it was not helpful...The end users will likely enter mm/dd/yy or mm/dd/yyyy and it will haveto be stored properly in the database table as column/fieldbirth_date...Thank you, Tom
View 11 Replies
View Related
