Date Data Type-Conversion Error.
Jun 22, 2006
Dear friends,
I am struggling to insert a date value in "dd-mm-yyyy" format to SQL server table having datatype as Date/Time.
Regional date setting for Server and Local systems are in dd-mm-yyyy format.
I am using following code
Dim DT As String
DT = Now()
DT = Format(DT, "MM/DD/YYYY")
for the inserting into table using command
ins_comm.CommandText = " INSERT INTO CARD (doe) values("& DT &")"
Procedure will end without any error ,but stored value for the date feild will be garbage value like 1900-01-01.
But if i used mm-dd-yyyy format ,it will get inserted.
What could be the reason,How I can save value in dd-mm-yyyy or dd-mm-yy format
Please help!!!
Graceson Mathew
View 1 Replies
ADVERTISEMENT
Jul 23, 2005
Hi all,I have a table called PTRANS with few columns (see create script below).I have created a view on top that this table VwTransaction (See below)I can now run this query without a problem:select * from dbo.VwTransactionwhereAssetNumber = '101001' andTransactionDate <= '7/1/2003'But when I create an index on the PTRANS table using the command below:CREATE INDEX IDX_PTRANS_CHL# ON PTRANS(CHL#)The same query that ran fine before, fails with the error:Server: Msg 242, Level 16, State 3, Line 1The conversion of a char data type to a datetime data type resulted inan out-of-range datetime value.I can run the same query by commeting out the AssetNumber clause and itworks fine. I can also run the query commenting out the TransactionDatecolumn and it works fine. But when I have both the conditions in theWHERE clause, it gives me this error. Dropping the index solves theproblem.Can anyone tell me why an index would cause a query to fail?Thanks a lot in advance,AmirCREATE TABLE [PTRANS] ([CHL#] [varchar] (100) COLLATE SQL_Latin1_General_CP1_CI_AS NULL ,[CHCENT] [numeric](2, 0) NOT NULL ,[CHYYMM] [numeric](4, 0) NOT NULL ,[CHDAY] [numeric](2, 0) NOT NULL ,[CHTC] [char] (2) COLLATE SQL_Latin1_General_CP1_CI_AS NOT NULL) ON [PRIMARY]GOCREATE VIEW dbo.vwTransactionsASSELECT CONVERT(datetime, dbo.udf_AddDashes(REPLICATE('0', 2 -LEN(CHCENT)) + CONVERT(varchar, CHCENT) + REPLICATE('0', 4 -LEN(CHYYMM))+ CONVERT(varchar, CHYYMM) + REPLICATE('0', 2 -LEN(CHDAY)) + CONVERT(varchar, CHDAY)), 20) AS TransactionDate,CHL# AS AssetNumber,CHTC AS TransactionCodeFROM dbo.PTRANSWHERE (CHCENT <> 0) AND (CHTC <> 'RA')*** Sent via Developersdex http://www.developersdex.com ***Don't just participate in USENET...get rewarded for it!
View 1 Replies
View Related
Mar 20, 2008
I have a web page which executes a stored procedure with several parameters. On execution I get an error for the following piece of code. I will be passing null value to the stroed procedure for this parameter "ActiveDate".
Dim parameterActivedate As SqlParameter = objCommand.Parameters.Add("@Activedate", SqlDbType.DateTime)
parameterActivedate.Value = ""
The error is:
System.InvalidCastException: Conversion from string "" to type 'Date' is not valid. at Microsoft.VisualBasic.CompilerServices.Conversions.ToDate(String Value) at webpage.Do_Update(Object Sender, EventArgs e)
View 3 Replies
View Related
Sep 2, 2015
I am using T-SQL I have a column (ColA)that has datetime format and I simply want to pull the next day but date only into ColB
ColA
3/12/2014 12:00AM
3/19/2014 12:00AM
ColB
3/13/2014
3/20/2014
I have been trying the command below but keep getting the error "Conversion failed when convertint the varchar value '03-03-2014' to data type int."
Convert (varchar(10), "StartDate", 110)+1 as Next Day
View 8 Replies
View Related
Jan 28, 2008
update tblPact_2008_0307 set student_dob = '30/01/1996' where student_rcnumber = 1830when entering update date in format such as ddmmyyyyi know the sql query date format entered should be in mmddyyyy formatis there any way to change the date format entered to ddmmyyyy in sql query?
View 5 Replies
View Related
Nov 6, 2007
Hi,I keep getting the error:System.Data.SqlClient.SqlException: Conversion failed when converting the varchar value '@qty' to data type int. When I initiate the insert and update.I tried adding a: Convert.ToInt32(TextBox1.Text), but it didn't work.. Could someone help?My code:private bool ExecuteUpdate(int quantity){ SqlConnection con = new SqlConnection(); con.ConnectionString = "Data Source=.\SQLEXPRESS;AttachDbFilename=|DataDirectory|\ASPNETDB.MDF;Integrated Security=True;User Instance=True"; con.Open(); SqlCommand command = new SqlCommand(); command.Connection = con; TextBox TextBox1 = (TextBox)FormView1.FindControl("TextBox1"); Label labname = (Label)FormView1.FindControl("Label3"); Label labid = (Label)FormView1.FindControl("Label13"); command.CommandText = "UPDATE Items SET Quantityavailable = Quantityavailable - '@qty' WHERE productID=@productID"; command.Parameters.Add("@qty", TextBox1.Text); command.Parameters.Add("@productID", labid.Text); command.ExecuteNonQuery(); con.Close(); return true;} private bool ExecuteInsert(String quantity) { SqlConnection con = new SqlConnection(); con.ConnectionString = "Data Source=.\SQLEXPRESS;AttachDbFilename=|DataDirectory|\ASPNETDB.MDF;Integrated Security=True;User Instance=True"; con.Open(); SqlCommand command = new SqlCommand(); command.Connection = con; TextBox TextBox1 = (TextBox)FormView1.FindControl("TextBox1"); Label labname = (Label)FormView1.FindControl("Label3"); Label labid = (Label)FormView1.FindControl("Label13"); command.CommandText = "INSERT INTO Transactions (Usersname,Itemid,itemname,Date,Qty) VALUES (@User,@productID,@Itemsname,@date,@qty)"; command.Parameters.Add("@User", System.Web.HttpContext.Current.User.Identity.Name); command.Parameters.Add("@Itemsname", labname.Text); command.Parameters.Add("@productID", labid.Text); command.Parameters.Add("@qty", Convert.ToInt32(TextBox1.Text)); command.Parameters.Add("@date", DateTime.Now.ToString()); command.ExecuteNonQuery(); con.Close(); return true; }protected void Button2_Click(object sender, EventArgs e){ TextBox TextBox1 = FormView1.FindControl("TextBox1") as TextBox; ExecuteUpdate(Int32.Parse(TextBox1.Text) );}protected void Button2_Command(object sender, CommandEventArgs e) { if (e.CommandName == "Update") { TextBox TextBox1 = FormView1.FindControl("TextBox1") as TextBox; ExecuteInsert(TextBox1.Text); } } Thanks so much if someone can!Jon
View 33 Replies
View Related
Jul 15, 2014
All source and target date fields are defined as data type "smalldatetime". The "select" executes without error though when used with "insert into" it fails with the error:
Msg 295, Level 16, State 3, Line 25: Conversion failed when converting character string to small date-time data type..I am converting from a character string to smalldatetime since the source and target date columns are "smalldatetime". All other columns for the source and target are nvarchar(255). I assume there is an implicit conversion that I don't understand. In a test, I validated that all dates selected evaluate ISDATE() to 1.
USE [SCIR_DataMart_FromProd_06_20_2014]
GO
IF OBJECT_ID ('[SCIR_DataMart_FromProd_06_20_2014].[dbo].[IdentifierLookup]', 'U') IS NOT NULL
DROP TABLE [SCIR_DataMart_FromProd_06_20_2014].[dbo].[IdentifierLookup]
[code]....
View 9 Replies
View Related
Jun 21, 2001
I'm trying to convert a column from a varchar(14) to float, some of the rows contain some non-numeric characters. I've tried to write a cursor to step through the records, run cast(col1 as float) on each record, then use if @@error <> 0 to capture an error but it doesn't work. It steps through fine but when the cast command fails it ends the execution of the script with "Error converting data type varchar to float."
How can i capture this error without having the script fail? Is there another way to get this done?
Thanks,
Jim
View 1 Replies
View Related
Jan 19, 2007
Hi,
I can't seem to fix the following error in my stored procedure.
Error Message: Conversion failed when converting the nvarchar value '1007-001' to data type int.
The line of code in my stored procedure that seems to be the problem is the following:
CASE WHEN [Order Details].[Job No] IS NULL THEN [Orders].[Order No] ELSE [Order Details].[Job No] END
Order No has a data type of INT and Job No has a data type NVARCHAR(8). In the above case statement i'm not trying to convert anything but just display a column depending on the out come of the case statement. If anyone knows how to get around this error you help would be very welcome.
View 2 Replies
View Related
Sep 27, 2004
Hi,
Iam trying to import data from a csv file into my table in SQL Server 2000. My table is called as temp_table and consists of 3 fields.
column datatype
-------- -----------
program nvarchar(20)
description nvarchar(50)
pId int
pId has been set to primary key with auto_increment.
My csv file has 2 columns of data and it looks like follows:
program, description
"prog1", "this is program1"
"prog2", "this is program2"
"prog3", "this is program3"
Now i use BULK INSERT like this
"BULK INSERT ord_programs FROM 'C:datafile.csv' WITH (FIELDTERMINATOR=',', ROWTERMINATOR='', FIRSTROW=2)"
to import data into my table in SQL server and it gives me this error
"Bulk insert data conversion error (type mismatch) for row 2, column 3 (pId)"
I guess i have to use fileformat or something since i dont have anything for pId field in the csv file to make it work...
Please help me out guys and please post a snippet of code if you have.
Thank You.
View 2 Replies
View Related
Aug 24, 2007
ALTER procedure [dbo].[findConsultantMail]
(
@PerID numeric(18,0),
@perMail nvarchar(100) OUTPUT
)
as
SELECT @perMail=PerMail FROM Personel
WHERE (PerID =@PerID)
return @perMail
I want to get Email address from sql database.
But whenever I executed stored procedure I get an error message
"Conversion failed when converting the nvarchar value 'xxxxxx@xxxxxx' to data type int"
If I want some numeric ID it is worked.
I also change my SP like this but results same.
ALTER procedure [dbo].[findConsultantMail]
(
@PerID nvarchar(18),
@perMail nvarchar(100) OUTPUT
)
as
SELECT @perMail=PerMail FROM Personel
WHERE (PerID =cast(@PerID as numeric(18,0)))
return cast(@perMail as nvarchar(100))
How can I get a string value form stored procedure.
View 4 Replies
View Related
Sep 18, 2015
I am trying to write a query that give me how many items were filed per year.
This is the error:
Conversion failed when converting the varchar value 'YEAR(1999)' to data type int.
Here is the query I am using:
SELECT COUNT (*),
CASE
WHEN ChargesFiledDate > 20141231 THEN 'YEAR (2015)'
WHEN ChargesFiledDate > 20131231 THEN 'YEAR (2014)'
WHEN ChargesFiledDate > 20121231 THEN 'YEAR (2013)'
ELSE YEAR (0000)
[Code] ...
And got the same error. I know there is probably a better way to get this data (being that I need it from 2007 to present), but don't know how to write it.
View 8 Replies
View Related
Dec 14, 2005
After testing out the application i write on the local pc. I deploy it to the webserver to test it out. I get this error.
System.Data.SqlClient.SqlException: The conversion of a char data type to a
datetime data type resulted in an out-of-range datetime value.
Notes: all pages that have this error either has a repeater or datagrid which load data when page loading.
At first I thought the problem is with the date, but then I can see
that some other pages that has datagrid ( that has a date field) work
just fine.
anyone having this problem before?? hopefully you guys can help.
Thanks,
View 4 Replies
View Related
Jul 6, 2006
I am trying to use the Bulk Insert Task to load from a csv file. My final column is a bit that is nullable. My file is an ID column that is int, a date column that is mm/dd/yyy, then 20 columns that are real, and a final column that is bit. I've tried various combinations of codepage and datafiletype on my task component. When I have RAW with Char, I get the error included below. If I change to RAW/Native or codepage 1252, I don't have an issue with the bit; however, errors start generating on the ID and date columns.
I have tried various data type settings on my flat file connection, too. I have tried DT_BOOL and the integer datatypes. Nothing seems to work.
I hope someone can help me work through this.
Thanks in advance,
SK
SSIS package "Package3.dtsx" starting.
Error: 0xC002F304 at Bulk Insert Task, Bulk Insert Task: An error occurred with the following error message: "Cannot fetch a row from OLE DB provider "BULK" for linked server "(null)".The OLE DB provider "BULK" for linked server "(null)" reported an error. The provider did not give any information about the error.The bulk load failed. The column is too long in the data file for row 1, column 24. Verify that the field terminator and row terminator are specified correctly.Bulk load data conversion error (type mismatch or invalid character for the specified codepage) for row 1, column 23 (cancelled).".
Error: 0xC002F304 at Bulk Insert Task 1, Bulk Insert Task: An error occurred with the following error message: "Cannot fetch a row from OLE DB provider "BULK" for linked server "(null)".The OLE DB provider "BULK" for linked server "(null)" reported an error. The provider did not give any information about the error.The bulk load failed. The column is too long in the data file for row 1, column 24. Verify that the field terminator and row terminator are specified correctly.Bulk load data conversion error (type mismatch or invalid character for the specified codepage) for row 1, column 23 (cancelled).".
Task failed: Bulk Insert Task 1
Task failed: Bulk Insert Task
Warning: 0x80019002 at Package3: The Execution method succeeded, but the number of errors raised (2) reached the maximum allowed (1); resulting in failure. This occurs when the number of errors reaches the number specified in MaximumErrorCount. Change the MaximumErrorCount or fix the errors.
SSIS package "Package3.dtsx" finished: Failure.
View 5 Replies
View Related
May 13, 2008
hello all .. I have a form that includes two textboxes (Date and Version) .. When I try to insert the record I get the following error message .. seems that something wrong with my coversion (Data type)"The conversion of a char data type to a datetime data type resulted in an out-of-range datetime value.The statement has been terminated."
in my SQL database I have the date feild as datetime and the version as nvarchar(max)
this is the code in the vb page .. Can you please tell me how to solve this problem?Imports System.Data.SqlClient
Imports system.web.configuration
Partial Class Admin_emag_insert
Inherits System.Web.UI.Page
Protected Sub Page_Load(ByVal sender As Object, ByVal e As System.EventArgs) Handles Me.Load
Record_DateTextBox.Text = DateTime.Now
End Sub
Protected Sub clearButton_Click(ByVal sender As Object, ByVal e As System.EventArgs) Handles clearButton.Click
Me.VersionTextBox.Text = ""
End Sub
Protected Sub addButton_Click(ByVal sender As Object, ByVal e As System.EventArgs) Handles addButton.Click
Dim objConnection As SqlConnection
Dim objDataCommand As SqlCommand
Dim ConnectionString As String
Dim record_date As Date
Dim version As String
Dim emagSQL As String
'save form values in variables
record_date = Record_DateTextBox.Text
version = VersionTextBox.Text
ConnectionString = WebConfigurationManager.ConnectionStrings("HRDBConnectionString").ConnectionString
'Create and open the connection
objConnection = New SqlConnection(ConnectionString)
objConnection.Open()
emagSQL = "Insert into E_Magazine (Record_Date, Version ) " & _
"values('" & record_date & "','" & version & "')"
'Create and execute the command
objDataCommand = New SqlCommand(emagSQL, objConnection)
objDataCommand.ExecuteNonQuery()
objConnection.Close()
AddMessage.Text = "A new emagazine was added successfully"
Me.VersionTextBox.Text = ""
End Sub
End Class
View 10 Replies
View Related
Sep 11, 2015
I've a text file which having a datetime column value like YYYY-MM-DD-HH.MM.SS.XXXXXX. I cannot convert this is to datetime format from text file using BCP utility.
Presence of hypen "-" between DD and HH, the SQL server does not accept this is as Datetime.
Is there any option to covert the date value in format file in BCP.
View 3 Replies
View Related
Apr 29, 2015
I am getting the above error when trying to add a dataset to my report. Here is my stored procedure below.
USE [HSIU_TEST]
GO
SET ANSI_NULLS ON
GO
SET QUOTED_IDENTIFIER ON
GO
ALTER PROCEDURE [ssrs].[spKEMHWaitTimeCaseList]
[Code] .....
View 5 Replies
View Related
Apr 18, 2015
I have a table with one of the column(EmpHiredate) datatype is char(10). It has value like "20141023". I need to display this value as date format(dd/mm/yyyy) in report. Following methods i tried in textbox expression but no luck.
=Format(Fields!EmpHireDate.Value,"dd/MM/yyyy")
=Cdate(Fields!EmpHireDate.Value)
Error:[rsRuntimeErrorInExpression] The Value expression for the textrun ‘EmpHireDate.Paragraphs[0].TextRuns[0]’ contains an error: Conversion from string "20041023 " to type 'Date' is not valid.
Is it possible to convert string to date using SSRS textbox expression ?
View 7 Replies
View Related
Apr 19, 2008
Advance thanks ....... My table is TimeSheet:----------------------------------- CREATE TABLE [dbo].[TimeSheet]( [autoid] [int] IDENTITY(1,1) NOT NULL, [UserId] [int] NOT NULL, [starttime] [datetime] NOT NULL, [endtime] [datetime] NOT NULL, [summary] [nvarchar](50) NOT NULL, [description] [nvarchar](50) NULL, [dtOfEntry] [datetime] NOT NULL, [Cancelled] [bit] NULL) ON [PRIMARY] My Query is------------------ insert into timesheet (UserId, StartTime,EndTime, Summary, Description,DtOfEntry) values (2, '19/04/2008 2:05:06 PM', '19/04/2008 2:05:06 PM', '66', '6666','19/04/2008 2:05:06 PM')i m not able to insert value Error Message is-------------------------Msg 242, Level 16, State 3, Line 1The conversion of a char data type to a datetime data type resulted in an out-of-range datetime value.The statement has been terminated. can any body give any solution
View 5 Replies
View Related
Aug 3, 2005
Hey, I have a big problem that i wanna search data from SQL by DateTime like thatselect * from test where recorddate='MyVariableWhichHoldDate'i use variable that holds Date info.i searched a lot infomation on net but there is no perfect solution. i know why this occur but there is no function to solve this problem. i used a lot of ways. it accept yyyy-mm-dd format but my variable format is dd-mm-yyyyy . is there any function for this problem? and any other solution.thanks for ur attentionregards
View 6 Replies
View Related
Mar 30, 2007
I am using Visual Studio 2005 and SQL Express 2005. The database was converted from MS Access 2003 to SQL Express by using the upsize wizard.
I would like to store the current date & time in a column in a table. This column is a smalldatetime column called 'lastlogin'.
The code I'm using is:
Dim sqlcommand As New SqlCommand _
("UPDATE tableXYZ SET Loggedin = 'True', LastLogin = GetDate() WHERE employeeID = '" & intEmployeeID.ToString & "'", conn)
Try
conn.Open()
sqlcommand.ExecuteNonQuery()
conn.Close()
Catch ex As Exception
MessageBox.Show(ex.Message)
End Try
This code works fine on my local machine and local SQL server. However at the client side this code results in the error as mentioned in the subject of this thread. I first used 'datetime.now' instead of 'getdate()', but that caused the same error. Then I changed the code to 'getdate()', but the error still remains.
The server at the client is running Windows Server 2000 UK . My local machiine is running WIndows XP Dutch.
Maybe the conversion from Dutch to UK has something to do with it. But this should be solved by using the 'Getdate()' function..... ?
View 1 Replies
View Related
Mar 7, 2007
We have some columns in a table where the date is stored as 19980101 (YYYYMMDD). The data type for this column is NUMBER(8) in Oracle.
I need to copy rows from Oracle to SQL Server using SSIS. I used the Data Conversion transformation editor to change it to DT_DATE, but the rows are not being inserted to the destination.
On Error, If I fail the component, then the error is :
There was an error with input column "ORDER_DATE_CONV" (1191) on input "OLE DB Destination Input" (29). The column status returned was: "Conversion failed because the data value overflowed the specified type.".
Regards
RH
View 3 Replies
View Related
Jan 17, 2007
here is my code the falue of pr_h_reqby is "Test"
Dim strconn As New SqlConnection(connstring)
Dim myReqdata As New DataSet
Dim mycommand As SqlDataAdapter
Dim sqlstr As String = "select pr_H_reqby from tbl_pr_header where pr_h_recid = " & recid & ""
mycommand = New SqlDataAdapter(sqlstr, strconn)
mycommand.Fill(myReqdata, "mydata")
If myReqdata.Tables(0).Rows.Count > 0 Then
'lblReqID.Text = myReqdata.Tables(0).Rows("reqid").ToString
lblNameVal.Text = myReqdata.Tables("mydata").Rows("pr_H_reqby").ToString()
lblEmailVal.Text = myReqdata.Tables("mydata").Rows("pr_h_reqemail").ToString()
lblReqDateVal.Text = myReqdata.Tables("mydata").Rows("pr_h_reqdate").ToString()
lblneedval.Text = myReqdata.Tables("mydata").Rows("pr_h_needdt").ToString()
lblDeptval.Text = myReqdata.Tables("mydata").Rows("pr_h_dept").ToString()
txtbxReqDesc.Text = myReqdata.Tables("mydata").Rows("pr_h_projdesc").ToString()
End If
View 1 Replies
View Related
May 9, 2008
Hi all,
I have 2 conversion related to same table.
a) Date:
I have a table called Table1. It has a field called HDate(nvarchar type). The records are like this;
HDate
H01042008
H01082008
H01102006
H01112008
Each records always start with an H charatcter, the remaining characters always represents date in the format of DDMMYYY.
I want to convert this format into the date format of YYYYMMDD. So once coverted, the record should be as follows;
HDateConverted
2008-04-01
2008-08-01
2006-10-01
2008-11-01
b) In the same table I have another field called NoID of nvarchar type. The records are like this;
NoID
00.
000
001
002
003
004
005
006
007
008
010
I want to convert it to Integer. Once converted the records for above example should be like this;
NoIDConverted
0
0
1
2
3
4
5
6
7
8
10
How can I solve both these conversions?..
Thanks a million for your qucik help.
Zee
View 10 Replies
View Related
Mar 13, 2001
I am trying to execute a custom DTS package i made using VB. The SQL datatypes that I am using are short, VarChar and Single in SQL. Would anybody happen to know the equivalent data types in MSAccess 97?
View 1 Replies
View Related
May 27, 2008
Im running the following join on derived/real tables. I get 18 rows when I run query1 mentioned below & I get 122 rows in query 2.
Column, id is nvarchar & column membernumber is INT. Im converting nvarchar to INT ...but it is still not fetching desired results..
Thanks
Anil Kumar.
Query1--
select isnull(ea.id,0) , coalesce(sum(ea.earn),0) ,
coalesce(B.membernumber,0) , coalesce(B.RecruitingBonus,0)
from [hqvm03hqsqlinst05].sdk.dbo.DecBonusPaidSPBN Ea
left outer join
(select A.Membernumber, A.RecruitingBonus from
(select bb.beenumber as MemberNumber, sum(pc.RecruitingBonusMTD) as RecruitingBonus
from beebusiness bb
join probucketamount pc on pc.beebusinessguid = bb.beebusinessguid
join beeentity be on be.beeentityguid = bb.beeentityguid
where pc.RecruitingBonusMTD != 0 group by bb.beenumber)A)B
--
on B.Membernumber = ea.id
--
where ea.earn != 0 or b.RecruitingBonus != 0
group by isnull(ea.id,0), coalesce(B.membernumber,0), coalesce(B.RecruitingBonus,0)
Query 2--
select isnull(ea.id,0) , coalesce(sum(ea.earn),0) ,
coalesce(B.membernumber,0) , coalesce(B.RecruitingBonus,0)
from [hqvm03hqsqlinst05].sdk.dbo.DecBonusPaidSPBN Ea
left outer join
(select A.Membernumber, A.RecruitingBonus from
(select bb.beenumber as MemberNumber, sum(pc.RecruitingBonusMTD) as RecruitingBonus
from beebusiness bb
join probucketamount pc on pc.beebusinessguid = bb.beebusinessguid
join beeentity be on be.beeentityguid = bb.beeentityguid
where pc.RecruitingBonusMTD != 0 group by bb.beenumber)A)B
--
on B.Membernumber = convert(int, ea.id)
--
where ea.earn != 0 or b.RecruitingBonus != 0
group by isnull(ea.id,0), coalesce(B.membernumber,0), coalesce(B.RecruitingBonus,0)
View 4 Replies
View Related
Sep 11, 2006
im trying to convert char (18) data type to decimal (18,6) but it wont let me do it. It gives an arithematic error. what would be other way to solve this problem. Can i do it with float if yes how so? or any other suggested way. Thanks
View 6 Replies
View Related
Oct 3, 2006
Dear all,
Hi, I'm using this code to export record from sql to excel and i got this error message "Implicit conversion from data type text to nvarchar is not allowed. use the convert function to run this query"
Excel file is already created columns in the view and excel file are the same and cell format of the excel is converted to text.
--- code used
insert into OPENROWSET('Microsoft.Jet.OLEDB.4.0',
'Excel 8.0;Database=c:filename.xls;',
'SELECT * FROM [filename$]') select * from ViewName
thanks,
View 6 Replies
View Related
Oct 28, 2006
I am not sure if this is the right place to post, although I am new to SQL Server.
I upsized a database from MS Access to SQL Server 2005 on my local machine. I am trying to change the primary key from int to uniqueidentifier, but I get this error: "conversion from int to uniqueidentifier is not supported on the connected database server". I have tried googling around to see if anyone has posted an answer, but haven't found a solution. I have also tried detaching the database, but that doesn't help either.
Can someone help me understand what the error is meaning by "connected database server", and how I can make it possible to change the data type?
Thank you.
Ben
View 5 Replies
View Related
Oct 3, 2006
Hi guys
I exported some data from a text file to sql server. Here is the sample data..
This table has about 2 million rows.There is a date field in the table which comes as a 'nvarchar' in sql .When i try to convert it to a 'datetime' , i get an error as operation timed out..
Here is the data from the text file...
Date dispensed Outliers Formulation ID Provider Number (dispensing) NSS flag Patient category Units dispensed Total days supply
1/01/2006 12:00:00 a.m. normal 106509.00 7952 I A 120.00 30.00
1/01/2006 12:00:00 a.m. normal 106509.00 8208 I A 360.00 90.00
1/01/2006 12:00:00 a.m. normal 106509.00 9460 I A 120.00 30.00
1/01/2006 12:00:00 a.m. normal 106509.00 10184 I A 120.00 60.00
1/01/2006 12:00:00 a.m. normal 106509.00 10291 I A 120.00 60.00
1/01/2006 12:00:00 a.m. normal 106509.00 11149 I A 120.00 30.00
1/01/2006 12:00:00 a.m. normal 106509.00 11294 I A 120.00 60.00
1/01/2006 12:00:00 a.m. normal 106509.00 11777 I A 120.00 30.00
1/01/2006 12:00:00 a.m. normal 106509.00 12048 I A 120.00 30.00
I have tried the bulk insert as well.
Here is the script for the create table ..
USE [Library]
GO
/****** Object: Table [dbo].[tablename] Script Date: 10/03/2006 14:45:59 ******/
SET ANSI_NULLS ON
GO
SET QUOTED_IDENTIFIER ON
GO
CREATE TABLE [dbo].[NormalOutlier1](
[Datedispensed] [nvarchar](max) COLLATE Latin1_General_CI_AS NULL,
[Outliers] [nvarchar](max) COLLATE Latin1_General_CI_AS NULL,
[Formulation ID] [float] NULL,
[Provider Number (dispensing)] [nvarchar](max) COLLATE Latin1_General_CI_AS NULL,
[NSS flag] [nvarchar](max) COLLATE Latin1_General_CI_AS NULL,
[Patient category] [nvarchar](max) COLLATE Latin1_General_CI_AS NULL,
[Units dispensed] [float] NULL,
[Total days supply] [float] NULL
) ON [PRIMARY]
Hope this helps
View 8 Replies
View Related
Jul 12, 2000
I would like to know how to translate a numeric value = 3 to a text or char value = 03.
Any input would be appreciated.
Thanks,
Joel
View 1 Replies
View Related
Aug 2, 2006
Hi,
I have a stored procedure a portion of which looks like this:
IF (CAST (@intMyDate AS datetime)) IN (
SELECT DISTINCT SHOW_END_DATE
FROM PayPerView PP
WHERE PP_Pay_Indicator = 'N' )
BEGIN
--ToDo Here
END
where:
@intMyDate is of type int and is of the form 19991013
SHOW_END_DATE is of type datetime and is of the form 13/10/1999
however when I run the procedure in sql query analyzer as:
EXEC sp_mystoredproc param1, param2
i get the error:
Server: Msg 242, Level 16, State 3, Procedure usp_Summary_Incap, Line 106
The conversion of a char data type to a datetime data type resulted in an out-of-range datetime value.
what is the proper way of doing the conversion from int to datetime in stored procedure?
thank you!
cheers,
g11DB
View 11 Replies
View Related
Apr 29, 2008
Hi All,
I am facing very weird issue...
When i am running package thru SQL server job and getting follwing error:
SIS Error Code DTS_E_OLEDBERROR. An OLE DB error has occurred. Error code: 0x80004005. An OLE DB record is available. Source: "Microsoft SQL Native Client" Hresult: 0x80004005 Description: "Invalid character value for cast specification". An OLE DB record is available. Source: "Microsoft SQL Native Client" Hresult: 0x80004005 Description: "Invalid character value for cast specification".
There was an error with input column "Billing_date" (2568) on input "OLE DB Destination Input" (979). The column status returned was: "Conversion failed because the data value overflowed the specified type.".
SSIS Error Code DTS_E_INDUCEDTRANSFORMFAILUREONERROR. The "input "OLE DB Destination Input" (979)" failed because error code 0xC020907A occurred, and the error row disposition on "input "OLE DB Destination Input" (979)" specifies failure on error. An error occurred on the specified object of the specified component. There may be error messages posted before this with more information about the failure.
SSIS Error Code DTS_E_PROCESSINPUTFAILED. The ProcessInput method on component "billing_table" (966) failed with error code 0xC0209029. The identified component returned an error from the ProcessInput method. The error is specific to the component, but the error is fatal and will cause the Data Flow task to stop running. There may be error messages posted before this with more information about the failure.
SSIS Error Code DTS_E_THREADFAILED. Thread "WorkThread0" has exited with error code 0xC0209029.
In the package, i am selecting data from SQL Server database into query(billing_table) and inserting data using destination task into SQL server table(stg_billing_table). Both table has same data type datetime for Billing_date.
Here are couple of points:
1) When i am trying to execute same insert statement thru SQL Server editor, it is running successfully.
INSERT INTO stg_billing_table (Billing_date)
SELECT Billing_date FROM stg_billing_table;
2) When I am running package from Solution explorer then also it works fine.
Issue only comes when i try to run package thru SQL server job. one point, There are lot of other task running parallel to this package when we run thru JOB.
One more thing which i have observed that when i tried to see input transformation datatype for same column in package, it is DT_DATABASETIMESTAMP. Well i am not able to understand that it may be potential issue because if it is related to DT_DATABASETIMESTAMP to date time conversion then we should have faced this issue while running thru solution IDE.
Issue looks related to database level buffer/ Memory overflow etc. to me. Can somebody help me understanding the issue?
Thanks.
View 8 Replies
View Related
