Date Parameters Format And Regional Setings
Oct 19, 2007
Hello,
I have a problem with date parameters in my Visual Studio reports. I have set parameters €śStart date€? and €śend date€? as €śdate time€? fields, and the report works fine on my computer, but as soon as I put it in report server and start opening from other computers in the costumers place, the date stays right only about half of the times, I gues it depends on regional settings of the computer that opens the report. For example date 02/12/2007 changes to 12/02/2007 that in effect changes the month from February to December, and if the day is 13 or higher I do not get any result at all.
How should I set the date parameters that they could be correctly open and wieved from any computer no matter what regional settings are?
View 3 Replies
ADVERTISEMENT
Dec 11, 2007
How to return time & number format that has set in the regional setting using stored procedure.
Following is my sp for getting current date format from Sql Server.
View 1 Replies
View Related
May 22, 2007
OK - truck loads of folk have reported this problem - but I cannot solve it - so apologies for repeating the question...
My SQL Server 2005 Report is developed on the same server as it is run.
I have SQL Server 2005 SP2 installed. The report language is set as en-GB.
The browser language setting is en-NZ.
The report previews fine - I pick May 22 from the picker and it appears as 22/05/2007 in the report parameter text box - which since I am in NZ is exactly as I want it.
I deploy the report - If I run it from the report manager virtual directory the date picker performs as above i.e correctly.
I run the deployed report from the report server virtual directory and here is where the problem occurs - selecting May 22 from the date picker produces 05/22/2007 in the report parameter text box and produces the error
"The value provided for the report parameter 'StartScheduledDate' is not valid for its type. (rsReportParameterTypeMismatch)"
thanks for any help here - this problem has made this a ridiculously expensive report!
View 4 Replies
View Related
Feb 1, 2008
E.g, i have a store procedure. The start date is long date (4/15/2007 3:00pm). i want to select the start date with a particular date (short date format 4/15/2006). Thanks in advance.
View 1 Replies
View Related
Nov 14, 2006
Hi
I am trying get my VB6 application to insert a record into a table (SQL Express) which has a datetime column but it would not process if the data format is differ to *American Date format*.
The date() function in VB returns 15/11/2006 which is in Australian Date format (DD/MM/YYYY) according to my setting in "Reginal and Lanuage Option-> Locale 0> English (Australia)" setting.
I get the following error:
Msg 242, Level 16, State 3, Server KITSQLEXPRESS, Line 1
The conversion of a char data type to a datetime data type resulted in an out-of-range datetime value.
The statement has been terminated.
My computer's locale is set to English (Australia) and I expect the datetime format would follow what is set in system locale
I've read an article somewhere on the net about how SQL 2005 eliminate the confusion of date conversion when read/write datetime records into a table...but it seems to me that it is still as in-flexible as MS Access
Is there a setting in the database that takes care of it?
Thanks
View 6 Replies
View Related
May 28, 2008
Hi,
I have a column date in my database which I should send it to Oracle database. The Date format in Oracle is number. I don’t know how should I convert the date to that format?
Example :
SQL FormatOracle Format
02/16/05 105046
Thanks.
View 6 Replies
View Related
Sep 21, 2006
HiI am using SQL 2005, VB 2005I am trying to insert a record using parameters using the following code as per MotLey suggestion and it works finestring insertSQL; insertSQL = "INSERT INTO Issue(ProjectID, TypeofEntryID, PriorityID ,Title, Area) VALUES (@ProjectID, @TypeofEntryID, @PriorityID ,@Title, @Area)"; cmdInsert SqlCommand; cmdInsert=new SqlCommand(insertSQL,conn); cmdInsert.Parameters.Add("@ProjectID",SqlDbType.Varchar).Value=ProjectID.Text; My query is how to detail with dates my previous code wasinsertSQL += "convert(datetime,'" + DateTime.Now.ToString("dd/MM/yy") + "',3), '";I tried the code below but the record doesn't save?string date = DateTime.Now.ToString("dd/MM/yy"); insertSQL = "INSERT INTO WorkFlow(IssueID, TaskID, TaskDone, Date ,StaffID) VALUES (@IDIssue, @IDTask, @TaskDone, convert(DateTime,@Date,3),@IDStaff)"; cmdInsert.Parameters.Add("IDIssue", SqlDbType.Int).Value = IDIssue.ToString();cmdInsert.Parameters.Add("IDTask",SqlDbType.Int).Value = IDTask.Text;cmdInsert.Parameters.Add("TaskDone",SqlDbType.VarChar).Value = TaskDoneTxtbox.Text;cmdInsert.Parameters.Add("Date",SqlDbType.DateTime).Value = date;cmdInsert.Parameters.Add("IDStaff",SqlDbType.Int).Value = IDStaff.Text;Could someone point to me in the right direction?Thanks in advance
View 3 Replies
View Related
Nov 19, 2014
We are migrating data from old DB2 systems to sql server 2012, the DATE FORMAT in those systems is in decimal format with 7 digits. CYYMMDD format.
I need to convert this into DD/MM/YYYY format.
View 9 Replies
View Related
Jun 15, 2005
I have date coming to one page as a string in the following format"May 4 2005 12:00AM"
I need to query one of my tables using this date in combination of other nondate values. How can I convert this date into valid sql server datetime format before I query a database tables
Please help
View 3 Replies
View Related
Jul 20, 2005
Hi,I have a problem with updating a datetime column,When I try to change the Column from VB I get "Incorrect syntax near'942'" returned from [Microsoft][ODBC SQL Server Driver][SQL Server]'942' is the unique key column valueHowever if I update any other column the syntax is fineThe same blanket update query makes the changes no matter what isupdatedThe problem only happens when I set a unique key on the date field inquestionKey is a composite of an ID, and 2 date fieldsIf I allow duplicates in the index it all works perfectlyI am trying to trap 'Duplicate value in index' (which is working onother non-date columns in other tables)This is driving me nutsAny help would be appreciated
View 5 Replies
View Related
Sep 28, 2007
Using DTS package in 2000 version, I am dumping TXT file contents into SQL Table,
I have one column having date in format YYYYMMDD(20070929) and corresponding column in SQL is datetime, but it fails on data type mismatch.
I have no choice of making date column in SQL to string or Varchar etc,
is there any way to make that date column in SQL to convert the value upon transformation from format (YYYYMMDD) to M/DD/YYYY (9/29/2007).
many many thanks,
View 2 Replies
View Related
Sep 5, 2007
Dear Expert!
A server with SQL 2005 sp2, Reporting Services and Sharepoint services (ver 3.0) (in integrated mode) gives an odd error. When viewing a Reporting Services report with a Date Time Picker, the date chosen is wrong. The preferred setting is Danish with the date format dd-mm-yyyy. The date picker shows the months in Danish but when selecting a date, and clicking on the Apply-button, the date reformats to US (mm-dd-yyyy).
Example:
When choosing 5th of September 2007 and clicking apply, it shows in the picker, 9th of May 2007.
When choosing 26th of September 2007 and clicking apply, it shows, again in US format, the RIGHT date but adds a timestamp €ś12:00 AM€? in the end, making further enquiries to fail.
The report itself receives the right date and shows correctly. The only case it fails is, when the time stamp appears.
The server is a 32-bit one with 4 GB RAM. A testserver with identical collation on the Reportserver database cannot recreate the error. The site containing the reports has been set to Danish in the regional settings. To Reinstall is not an option.
The test report has no database connection whatsoever.
When setting the site to US, the timestamp won€™t appear at all.
The server has been restarted and the installation procedure was of the simple kind. No special tweaks at all.
Any advice would be greatly appreciated.
Kind Regards
Johan Rastenberger
View 1 Replies
View Related
Jul 24, 2007
I am having report parameter end date I am showing the default value "5/21/2007 11:59:59 PM" in the end date paramter. And also I want to show date time format "(MM/DD/YYYY HH:MMS)" in the right hand side of the parameter. How to do this?
Thank You
View 1 Replies
View Related
Jun 15, 2015
i have a excel file in which i have a date column it having the below date formats belowÂ
Install Date
20140721
31.07.2014
07.04.2015
20150108
20140811
20150216
7/21/2014
11.08.2014
07.08.2014
So using SSIS how we would load this date column into the table into one format like dd/mm/yyyy or any single date format
View 6 Replies
View Related
Oct 21, 2013
Aim – Convert the following field ”[INSTALLATION_DATE]” date format from “20090709” Into this “2009-07-09” ,
Also create a new column called “BegMonth” which selects first day of the given month of the converted date column
The table is ;
SELECT
[FDMSAccountNo],
[INSTALLATION_DATE]
FROM [FDMS].[dbo].[stg_LMPAB501]
Results
FDMSAccountNoINSTALLATION_DATE
87800000088420030521
Required Results
FDMSAccountNoINSTALLATION_DATEBegMonth
8780000008842003-05-212003-05-01
View 3 Replies
View Related
Apr 10, 2008
I am using reporting services, when I go to view my report in Report Manager (web browser is IE7), I choose a date from a date picker control, and the date that populates the date field is in US format mm/dd/yyyy, however in my regional settings, although I have English(United States) I have altered my short date format to be dd/mm/yyyy.
Currently my report will display an error saying the date is an invalid format if I pick a date that violates the mm/dd/yyyy format. I want it to display the date format that I have defined in my regional settings, without modifying the 'Language Preference' settings for IE.
The report properties has =User!Language for the 'Language' property.
Does anyone have any suggestions?
View 1 Replies
View Related
May 4, 2008
dear all can anybody help me soon....
i am using visual studio 2005 webapplication based on sql server 2005 database.
i can get one date from sql using one query.
I am selecting my field based on following code CONVERT(varchar, Oman.Positions.Datum, 9) AS LastUpdate
this case my output is May 4 2008 3:19:45:000AM.....
this output is correct but from this output i want to avoid millisecond part.
ie i want the output like May 4 2008 3:19:45 AM....
how i can do this
regards
View 4 Replies
View Related
Dec 11, 2007
I need to do the following and am hoping someone can help me out.
I have C#(asp.net app) that will call a stored procedure. The C# will pass in a date to thestored procedure. The date is in the format YY/MM/DD. Once inside of the stored procedure, the datepassed into the stored proc needs to be compared to todays date. Todays date must be determined inthe SQL.
So basically here is my pseudo code for what I am trying to accomplish. Basically I just am afterthe comparison of the two values:
If @BeginDate < TodaysDate
The difficult part is how to obtain the value for "TodaysDate"
Taking into consideration that "TodaysDate" should probably be in the format of YY/MM/DD considering that is how the date it is to be compared with is being passed in.
Can someone please code this out for me in Microsoft SQL. I would be forever grateful.
View 1 Replies
View Related
Feb 15, 2008
Hi,
I Have this simple convertion in a Script component
Dts.Variables("dateOfProcess").Value = CDate(lineMCF.Substring(30, 2) + "/" + lineMCF.Substring(28, 2) + "/" + lineMCF.Substring(24, 4))
this works fin in my development environment which has a spanish version of SQL Server and uses "DD/MM/YYYY" as date format.
but the production environment has an english version of SQL Server and "MM/DD/YYYY" date format, so the package crashes in this server.
How do I convert the string to date not depending on the SQL server language.
thanks.
View 2 Replies
View Related
Oct 24, 2007
Any way to disable the calendar datepicker show it does not even show up on the report?
View 2 Replies
View Related
Jan 24, 2008
Hello,
I am using the calender parameter and I need to convert my data date format to the one that matched that is returned on selecting a date from this calender. Can you show me what this format is.
how can I convert my existing date format to this format. The existing date format is 2007-07-26 21:27:13.000
thank you
Kiran
View 5 Replies
View Related
Mar 31, 2008
Hi,
I'm using the following code (created by Report Designer) to populate the From and To data controls in my report;
WITH MEMBER [Measures].[ParameterCaption] AS '[Check Date].[Date].CURRENTMEMBER.MEMBER_CAPTION' MEMBER [Measures].[ParameterValue] AS '[Check Date].[Date].CURRENTMEMBER.UNIQUENAME' MEMBER [Measures].[ParameterLevel] AS '[Check Date].[Date].CURRENTMEMBER.LEVEL.ORDINAL' SELECT {[Measures].[ParameterCaption], [Measures].[ParameterValue], [Measures].[ParameterLevel]} ON COLUMNS , [Check Date].[Date].ALLMEMBERS ON ROWS FROM [MyCube]
The report parameters for From and To contain a first item of 'All' which I don't want. How can I remove this please?
Thanks.
View 3 Replies
View Related
Nov 27, 2015
I have a table that has a DATE field named. AccountingDate that is in the format YYYY-MM-DD. It's not a VARCHAR field. I simply want to convert this date field into the format MM/DD/YYYY and call it New_Accounting_Date.
I've played with various combinations of CAST & CONVERT but haven't been able to get it to work.
Below is my latest effort which returns the error:
Incorrect syntax near the keyword 'as'
What code would work to return a MM/DD/YYYY value for New_Accounting_Date?
Select GLBATCH.AccountingDate,
convert(GLBATCH.AccountingDate as date),101) AS New_Accounting_Date
from GLBATCH
View 11 Replies
View Related
Jan 8, 2007
Hi,
I am having the "classical problem" of the forums; A local date changed to the american format (normally in the development environment) which I call "Switching months with days"... well it switches both again if you press "view report" again :)The problem I'm having is that when I Navigate from one report to other, the dates get switched... Everything's been set in the locale uk date format (dd/mm/aaaa), in the operating system, in the database and in the reports... and the reports are working properly through the web interface.. the only thing that is not working properly is the Navigation which switches the date month with the day...Changing all the Reporting Services server, database server to the american format date is not an acceptable solution. Thanks for any guidance on this, as I'm pretty lost...Jose
View 4 Replies
View Related
Jan 30, 2007
Hello,
I am running reporting server on a "english" server with dutch regional settings.
My client and the client of the users are also a "english" client with dutch regional settings.
A dutch number should be formatted like 1.234.567,89
Unfortenately when I run a report I get the number back (non formated) like 1234567.89
How do I get it in the dutch format ?
With regards,
Constantijn Enders
View 2 Replies
View Related
Nov 13, 2007
Good morning all,
I have a report which is getting its parameters from an ASP.net page. My ASP developer wants to send in simple values, such as the list 1,2,3,4 for a parameter. However my report needs that list to look like [CD RSRC].[RSRC].&[1], [CD RSRC].[RSRC].&[2], [CD RSRC].[RSRC].&[3], [CD RSRC].[RSRC].&[4].
Is there any way, on the report services side, to capture an incoming report parameter, parse it, loop over the parsed values and format them?
I don't think there is, but I wanted to check before I go back to the developer and tell him he has to send in tuple lists.
Thanks,
Kathryn
View 1 Replies
View Related
Jan 30, 2008
Hi All,
I have been playing around with SSIS for a bit, and i am running into the following problem.
I am trying to import 3 worksheets from an excel file.
The import must be performed on several servers.
I created a config file for this which contains the path to the excel file and the connectionstring, and the LocaleID's of the different tasks.
I have the following tasks :
1. preparation SQL task ( this calls a few sql statements which cleanup certain import tables )
2. data flow task ( this the actual import from the excel file to several tables, this what goes wrong )
3. execute SQL task ( this calls a stored proc which does some filtering the imported data into other tables ).
point 2 is giving problems.
Point 2 will only work when i change my computers regional settings to English.
If i have my settings set to Dutch, it won;t work. Even specifying the english localeID's seem to have no effect.
The problem is a decimal field in the database, and the difference in decimal separator. When i set my regional settings to English the values in the excel are notated like 74.54 which works. And when i have the dutch regional settings the same value in excel is displayed like 74,54. I haven't got a clue how to solve this.
Is there a way to tell the SSIS to not use the regional settings, but use the settings specified in the config file ?
And if this is possible how can i check if the correct settings are used ?
View 1 Replies
View Related
Aug 12, 2007
Hi,
I have a date field in my report which takes the current date as the value. My default regional settings is en-US. If I change my regional settings to Germany, on executing the report, I get rsReportParameterTypeMismatch for the Date parameter.
Any help in this regard is welcome.
Thanks.
View 2 Replies
View Related
Nov 11, 2002
Hello,
anybody has query regarding converting date from Julian into our our dateformat?.
Your Help really apreciated,
Thanks,
Ravi
View 3 Replies
View Related
Feb 7, 2008
Here's the situation:
I have a ssis package which receives 3 dates as input parameters (3 datetime variables), executes different data flows and at the end inserts (among some other values) these 3 dates into a custom log table.
The problem comes while inserting the values into a log table. I added an Execute SQL Task that calls a stored procedure which inserts a record into a log table (sqlStatement exec dbo.InsertIntoLog date1=?, date2=?, date3=?).
In Parameter mapping section I set parameters = variables that hold the datetime values. The problem is that the dates are inserted into the log table in American format (mm/dd/yyyy, that's the server setting), my dates are in the european format...
Any ideas how to avoid it? Is there a way to write an expression instead of the sqlStatement in which I'd do some datepart-ing?
View 25 Replies
View Related
Aug 27, 2004
Hi all,
With Windows regional options are set to Dutch/Netherlands (or any other country using comma as the decimal symbol), MS SQL Server BCP Delivers incorrect figures to the target table.
The source table is a text file containing commas as the decimal character (As an example, in the text file 100.000 is represented as 100,000).
The target table is a Sql Server database table, with the column in question defined as a FLOAT datatype.
When BCP is run to deliver the data from the text file to Sql Server,
all figures are multiplied by 1000 because the input file for BCP contains a comma as the decimal symbol.
Thus, instead of the data being delivered with a value of 100, it ends up having a value of 100000
Is there anyone out there who is aware of any command line parameters that can be added to the bcp command in order to avoid this ? Note, the field in question is defined as SQLCHAR in the BCP format file.
Thanks for any help anyone may be able to offer.
View 2 Replies
View Related
Dec 23, 2006
I tried Data Mining Add-Ins for Office 2007 - CTP December 2006.
Test settings: Windows XP SP2 english with Italian regional settings, Office 2007 english (RTM), SQL Server 2005 Developer (with SP2 CTP Dec06) and Data Mining Add-ins for Office 2007 (CTP Dec06).
If I keep regional settings in Italian, I get error like this:
Old format or invalid type library. (Exception from HRESULT: 0x80028018 (TYPE_E_INVDATAREAD))
If I change regional settings to English, the Add-in works.
I found this description as the possible cause of the problem: http://msdn2.microsoft.com/en-us/library/ms178780(vs.80).aspx - if this is the issue, it would be necessary to change the ExcelLocale1033Attribute on the component.
Is there another workaround other than to install the Office 2007 MUI?
Marco Russo
http://www.sqlbi.eu
http://www.sqljunkies.com/weblog/sqlbi
View 10 Replies
View Related
Sep 17, 2006
Hello!I inserted data to dbase, but I soon got error message.. Europien date format is dd.mm.yyyy So I get date from text box:<asp:textbox id="date" style='Z-INDEX: 102; LEFT: 411px; POSITION: absolute; TOP: 42px' runat='server' Width='185px' Height='22px'>Date</asp:textbox>Date which is get as string is inserted to dbase by code behind:string insert = "INSERT INTO tbl_UFD_PlanPremier (DAT_Prem) VALUES ('"+date.Text+"')";I thought that that will work ok, but.. By date 1.1.2006 was everithing ok, problems begann with 30.5.2006 - I get error message: failed to convert char data type to smalldatetype.I was seeking for reason and I found out that date in SQL database is saved in format dd.mm.yyyy but string which is inserting by ASP function:ExecuteNonQuery() into dbase has format mm.dd.yyyy - when I wrote to textbox date 5. 30. 2006, it passed allrightIs there any help? like how to change date format? Thanks
View 3 Replies
View Related
