Have seen other questions here about modifying date pickers supplied by reports created in BIDS. The answer is usually NO. But this does not involve a format change, simply want to limit say to a specific year.
Any ideas?
Dear Expert!
A server with SQL 2005 sp2, Reporting Services and Sharepoint services (ver 3.0) (in integrated mode) gives an odd error. When viewing a Reporting Services report with a Date Time Picker, the date chosen is wrong. The preferred setting is Danish with the date format dd-mm-yyyy. The date picker shows the months in Danish but when selecting a date, and clicking on the Apply-button, the date reformats to US (mm-dd-yyyy).
Example:
When choosing 5th of September 2007 and clicking apply, it shows in the picker, 9th of May 2007.
When choosing 26th of September 2007 and clicking apply, it shows, again in US format, the RIGHT date but adds a timestamp €ś12:00 AM€? in the end, making further enquiries to fail.
The report itself receives the right date and shows correctly. The only case it fails is, when the time stamp appears.
The server is a 32-bit one with 4 GB RAM. A testserver with identical collation on the Reportserver database cannot recreate the error. The site containing the reports has been set to Danish in the regional settings. To Reinstall is not an option.
The test report has no database connection whatsoever.
When setting the site to US, the timestamp won€™t appear at all.
The server has been restarted and the installation procedure was of the simple kind. No special tweaks at all.
Any advice would be greatly appreciated.
Kind Regards
Johan Rastenberger
I am using reporting services, when I go to view my report in Report Manager (web browser is IE7), I choose a date from a date picker control, and the date that populates the date field is in US format mm/dd/yyyy, however in my regional settings, although I have English(United States) I have altered my short date format to be dd/mm/yyyy.
Currently my report will display an error saying the date is an invalid format if I pick a date that violates the mm/dd/yyyy format. I want it to display the date format that I have defined in my regional settings, without modifying the 'Language Preference' settings for IE.
The report properties has =User!Language for the 'Language' property.
Does anyone have any suggestions?
In SSRS report I have 2 parameters start date and end date, so when somebody is selecting end date more than a month(if today date is 22 then they are selecting aug 23) then it should give error message to user like "Date out of range".
View 2 Replies View RelatedHi,
I tried to create parameters in my report. I need one date picker. So i select data type as datetime. in default values i selected as non-queried and in date time functions i selected =Today. But am unable to set current date. Please help me to solve it.
Regards
Nataraj.C
Any way to disable the calendar datepicker show it does not even show up on the report?
View 2 Replies View RelatedI have 2 tables, one is table A which stores Resources Assign to work for a certain period. The structure is as below
Name StartDate EndDate
Tan 2015-04-01 08:30:00.000 2015-04-01 16:30:00.000
Max 2015-04-01 08:30:00.000 2015-04-01 16:30:00.000
Alan 2015-04-01 16:30:00.000 2015-04-02 00:30:00.000
The table B stores the item process time. The structure is as below
Item ProcessStartDate ProcessEndDate
V 2015-04-01 09:30:10.000 2015-04-01 09:34:45.000
Q 2015-04-01 10:39:01.000 2015-04-01 10:41:11.000
W 2015-04-01 11:44:00.000 2015-04-01 11:46:25.000
A 2015-04-01 16:40:10.000 2015-04-01 16:42:45.000
B 2015-04-01 16:43:01.000 2015-04-01 16:45:11.000
C 2015-04-01 16:47:00.000 2015-04-01 16:49:25.000
I need to select the item which process in 2015-04-01 16:40:00 and 2015-04-01 17:30:00. Beside that I need to know how many resource is assigned to process the item in that period of time. I only has the start date is 2015-04-01 16:40:00 and end date is 2015-04-01 17:30:00. How I can select the data from both tables. There is no need for JOIN, just seperate selections.
Another item process time is in 2015-04-01 10:00:00 and 2015-04-04 11:50:59.
The result expected is
Table A
Name StartDate EndDate
Alan 2015-04-01 16:30:00.000 2015-04-02 00:30:00.000
Table B
Item ProcessStartDate ProcessEndDate
A 2015-04-01 16:30:10.000 2015-04-01 16:32:45.000
B 2015-04-01 16:33:01.000 2015-04-01 16:35:11.000
C 2015-04-01 16:37:00.000 2015-04-02 16:39:25.000
Scenario 2 expected result
Table A
Name StartDate EndDate
Tan 2015-04-01 08:30:00.000 2015-04-01 16:30:00.000
Max 2015-04-01 08:30:00.000 2015-04-01 16:30:00.000
Table B
Item ProcessStartDate ProcessEndDate
Q 2015-04-01 10:39:01.000 2015-04-01 10:41:11.000
W 2015-04-01 11:44:00.000 2015-04-01 11:46:25.000
My goal is to select values from the same date range for a month on month view to compare values month over month. I've tried using the date trunc function but I'm not sure what the best way to attack this is. My thoughts are I need to somehow select first day of every month + interval 'x days' (but I don't know the syntax).In other words, I want to see
Select
Jan 1- 23rd
feb 1-23rd
march 1-23rd
april 1-23rd
,value
from
table
Hi,
Does anyone have a workaround or know of a fix to this problem:
Default value set to 'date pick' from date currently within field by setting value equal to that field . ie if date is 01/01/2010 date picker opens in Jan 2010 - works ok.
However, once published to Sharepoint and run through browser the Date Picker ignores the default value and the date picker opens for today. ie April 2008.
Any words of wisdom gratefully recieved,
Howard Stiles
I have a QA Deployment Date field that is being returned in a custom report I created. I also found a sample date range parameter:
What I want to accomplish:
I want to select a From and To Date and filter the report to only display the rows that have the QA Deployment Date within the selected range.
For example.. I want to select From Date (8/1/2105) and To Date (8/31/2015) and I only want to return only the results that have a QA Deployment date between that selected range.
Date parameter. I created a report that allows a drop down for a date range to be selected. However, whenever I preview the report, I get an error. I know my error stems from my date fields being in this format "201301" , and the "date/ time" in SSRS being mm/dd/yyyy on the drop down calendar in SSRS.
I know the direction I want to go in, but just a little confused on where would I use the convert or cast function. Would it be in the data parameter itself, or a part of the query before the @start date and @End date?
I would like to be able to search by a single date, @StartDate, or by a date range , between @StartDate and @EndDate. I am having a hard time with the logic on this for a report in SSRS.
View 5 Replies View Relatedhi all,
i've just updated my sql server 2005 with sp1 and sp2.
i want my report date format to change according to regional setting, therefore i've set the report property for language as User.Language.
how do i set the report parameter of type datetime to follow the format of regional setting?
my date parameter has default value which i query from a table.
for e.g. if my regional setting is UK and the default date is 9/7/2006, the date picker will display date at 7 september 2006 instead.
please help.... thanks!
I created a report with two parameters, StartDate and EndDate.
They are specified as datetime type.
When I went to the Preview tab, there were date pickers for both values.
After a week or so of using the report, I thought it would be better if I gave the parameters default values. I spent some time reading what others had done in this forum and used the following as the expressions for the parameters:
Code Snippet
=IIF(Weekday(Today()) =1, FormatDateTime(Today(),2),
IIF(Weekday(Today()) =2, FormatDateTime(Today.AddDays(-1),2),
IIF(Weekday(Today()) =3, FormatDateTime(Today.AddDays(-2),2),
IIF(Weekday(Today()) =4, FormatDateTime(Today.AddDays(-3),2),
IIF(Weekday(Today()) =5, FormatDateTime(Today.AddDays(-4),2),
IIF(Weekday(Today()) =6, FormatDateTime(Today.AddDays(-5),2), FormatDateTime(Today.AddDays(-6),2)))))))
=IIF(Weekday(Today()) =1, FormatDateTime(Today.AddDays(6),2),
IIF(Weekday(Today()) =2, FormatDateTime(Today.AddDays(5),2),
IIF(Weekday(Today()) =3, FormatDateTime(Today.AddDays(4),2),
IIF(Weekday(Today()) =4, FormatDateTime(Today.AddDays(3),2),
IIF(Weekday(Today()) =5, FormatDateTime(Today.AddDays(2),2),
IIF(Weekday(Today()) =6, FormatDateTime(Today.AddDays(1),2), FormatDateTime(Today(),2)))))))
and now, there are no date pickers. I am curious. Why are they gone? Can I get them back and still have my default values?
Thanks,
IanO
I am sure others have ran into this issue.
But I need to have date parameters using the datetime type and I need to be able to pass the correct value to the MDX.
Updated SQL 2005 to SP2 and Reporting Services Date Picker now has dates defaulting to US format (MM/DD/YYYY) instead of our previous English-Australian (DD/MM/YYYY). Both the clients and server are set to English Australian regional settings in the O/S and the reports are composed for English Australian language. Reports have correct format in Visual Studio development and re-deploying them had no effect. Everything was fine under SP1 - not sure what is going on. Any ideas???
View 4 Replies View Relatedhi.
i have created a database with a table called customer. hav a field which displays the date. how can i add a query on the date picker so that when i choose a date on the calendar i can view the customers details. in other display the record by choosing a particular date.
thx.
Im sure we have all seen this error before:
"The value for the report parameter XXX is not valid for its type"
I have a report (RS 2005) that has 2 date parameters, "start" and "end".
My SQL in not very complicated at all, I have a simple WHERE date between @start and @end
But when I go to view the report in VS2005, I get the above error.
I am yet to find a decent fix for this, what is going on? the date I am trying is:
"26/02/2007" now, obviously its trying to us the en-US formatting, but im in Australia, so I want en-AU.
I have changed my report Language setting to be en-AU, my local settings in Region Setting is English (Australia). (BTW, I had to change the Language setting in my report through the XML, is there a better way to do this?)
How do I fix this?? I have searched an searched but no-one seems to be able to give a clear answer as to what is going on....
I have to display the last temperature reading from an activity table for all the dates in a selected date range.So if I select the date range from 09/01/2012 to 09/30/2012, the results should look like this:
Date Temperature
09/01/2012 73.5
09/02/2012 75.2
09/03/2012 76.3
09/04/2012 73.3
09/05/2012 77.0
09/06/2012 74.5
and so on.
I am using this to get the dates listed:
WITH CTE_DatesTable
AS
(
SELECT CAST('20120901' as date) AS [Date]
UNION ALL
SELECT DATEADD(dd, 1, [Date])
FROM CTE_DatesTable
WHERE DATEADD(dd, 1, [Date]) <= '20120930'
)
SELECT [Date]
FROM CTE_DatesTable
How could I get the temperature if I did a sub-query here?
I have a report that I need to run on 2 different date ranges.
Both report's data is 2 days behind today's date.
so...
WHERE reportdate between dateadd('d',date(),-2) and dateadd('d',date(),-2)
OR SOMETHING LIKE THAT, NO BIGGIE HERE
The 2nd report is a month to date report. This is the 1 I can't figure out.
WHERE reportdate between (the first day of this month) and dateadd('d',date(),-2)
So that would look like
WHERE reportdate between 1/1/2007 and 1/21/2007
My problem is, if today is the 1st day of the month... how can I get my critiera to NOT do this
WHERE reportdaye between 2/1/2007 and 1/30/2007
Any help would be greatly appriciated!
Hi Group!I am struggling with a problem of giving a date range given the startdate.Here is my example, I would need to get all the accounts opened betweeneach month end and the first 5 days of the next month. For example, inthe table created below, I would need accounts opened between'5/31/2005' and '6/05/2005'. And my query is not working. Can anyonehelp me out? Thanks a lot!create table a(person_id int,account int,open_date smalldatetime)insert into a values(1,100001,'5/31/2005')insert into a values(1,200001,'5/31/2005')insert into a values(2,100002,'6/02/2005')insert into a values(3,100003,'6/02/2005')insert into a values(4,100004,'4/30/2004')insert into a values(4,200002,'4/30/2004')--my query--Select *[color=blue]>From a[/color]Where open_date between '5/31/2005' and ('5/31/2005'+5)
View 2 Replies View RelatedI read a lot of posts in this forum, but none of them provide a solution.
Probably it is related to SP2 as many report, I have SP2 as well...
A funny situation:
I have a report parameter @date, datatype datetime, so I can use the datepicker control.
But, even when not using this @date parameter in my dataset, I still get the error:
The value provided for the report parameter 'date' is not valid for its type. (rsReportParameterTypeMismatch)
Of course it has to do with regional settings and languages etc... But at my international client's site, workstations are in any regional setting and servers are in en-US, nothing I can do about that.
Come'on Microsoft, don't tell us this datePicker is only for the US market?
Hi;
We received a Payment from a customer on '10/10/2007 10:30:00'. i am trying to calculate the commission we would receive from that payment. the commission rate can be edited. so i have to find what the commission rate was when that payment was received.
I have a CommisionAudit table that tracks changes in commission rate with the following values.
ID | Commission Change | UpdatedOn
----------------------------------------------
1 | Change from 20->25 | 03/07/2007 09:00:00
----------------------------------------------
2 | Change from 25->35 | 10/09/2007 17:00:00
----------------------------------------------
3 | Change from 35->20 | 01/10/2007 16:00:00
----------------------------------------------
4 | Change from 20->26 | 11/10/2007 10:00:00
----------------------------------------------
with this payment, as the commission rate had been changed on 01/10/2007 it would obviously be 20%(ID 3). But I need to write sql to cover all eventualities i.e. Before the first and after the last. any help would be most welcome.
I have a date range parameters in my report, and when viewing it using IE and Firefox ReportViewer, the date picker is there. But when I tried running it using Chrome, the date picker was missing. I tried double click on the date field itself but nothing.
My Chrome version is 17.0.963.79 m. I tried allowing the pop-up blocker but still nothing.
SSRS Date Picker is not working in Google Chrome, it works in both IE and Firefox.
View 3 Replies View RelatedI am attempting to write a SQL query that retrieves info processed between two times (ie. 2:00 pm to 6:00 pm) during a date range (ie. 8/1/06 to 8/14/06)... I am new to SQL and am perplexed... I have referenced several texts, but have not found a solution. Even being pointed in the right direction would be greatly appreciated!!
View 6 Replies View RelatedI have a query that is the initial part of a stored procedure; the results are put in a temporary table that will be used by several other operations. I'm trying to consolidate some of these, possibly getting the whole thing down to one query. One of steps I'm trying to consolidate results in a join that looks like this (where c is a table alias created previously):
Code:
LEFT JOIN proccode_t pc ON pc.proccode=c.proccode
AND (pc.effectivedate<=c.dateofservice OR pc.effectivedate IS NULL)
I don't have any influence over the schema in this database, I can only write select queries. Things are set up such that proccode_t will have several records for any given proccode, each with a different effectivedate. The oldest/original effectivedate is often NULL. This means my join up there often matches up with several records in proccode_t, when I only ever want to match the one most recent and occasionally not match anything at all.
I know a few ways to accomplish this (as covered in another recent thread here), but none of them seem to match well to this situation. A sub query that uses TOP 1 ORDER BY effectivedate DESC would almost cover it, but if the query returns NULL that might or might not mean it matched the NULL effectivedate for that proccode. It's also kinda slow.
The proccoce_t table does contain another field to tell you which of the codes is currently effective aside from just using the date, and that would be the normal way to do this here. However, this procedure is for auditing old data and therefore the currently effective proccode may not be the one I'm concerned with.
Any thoughts?
I have a order table which has a orderdate and despatchdate
i want to write a query in such a way that i want to get all the details from the table for a range specified date as the oderdate and despatchdate are user
interactable. I search the google to solve this problem but could not find a answer
What is the best way to do a where clause that includes a date range. Ex. WHERE date1 BETWEEN @Begin Date AND @EndDate. I want to include all of the @EndDate.
View 6 Replies View RelatedI am working on a report for staff productivity, and have to get a summary figure for how much productivity was expected for a date range. The problem is that the amount expected from an employee can change if they move from full time to part time etc.
So I have a view that has the begin date, end date, expected daily production # by employee, and have to figure out how to get the multiplication to work correctly.
Example:
Employee 1 had a daily production # of 10 from 1/1/07-3/31/07 and daily production of 5 from 4/1/07 - now
If I run the production report for 1/1/07 - 6/30/07 what I want is one summary figure of for the entire range which would be 10*Datediff(d,1/1/07,3/31/07)+5*Datediff(4/1/07,6/30/07) or 890+450=1340.
Of course the actual date range for the report will be a variable, and the dates for the begin and end of a production date range will be all over the place.
Any quick and easy way to do this?
Hey guys..
pls help
what query should I do? Obtaining certain date only using SQL server2000?
Thnx...
Hi All,
I am very new to SQL and have a question, hopefully someone can answer.
I have a table of data, one of the fields is a date.
What i want to do is be able to have a query that can check if the date falls within a certain range - ie fiscal year and output in another column the fiscal year "code".
Ie: dates between 01/06/05 and 31/05/06 is fiscal year 0506
dates between 01/06/06 and 31/05/07 is fiscal year 0607
Could this query be dynamic so if a new fiscal year begins it would know to make the output the next fiscal year code???
Any help is much appreciated.
Cheers
Rudi
Hi, 'am fairly very new to SQL SERVER 2000.
I have this particular problem....I need to develop a stored proc
where in a parameter checks the dates between JAN 1st and DEC 31st of a particular year. The parameter is declared for year..
I'll mention a small example below...
USE PUBS
declare @year as varchar
set @year = 1993
select * from employee
where hire_date >= '@year-01-01'
and hire_date<='@year-12-31'
This is just an example to show wat i want...
the year is prompted to the user...he/she can select any year
I get the following error message....
Server: Msg 241, Level 16, State 1, Line 1
Syntax error converting datetime from character string.
Can anyone help me on this......
Thanks in advance