Datetime Entry For Querying Analysis Service Cube
Jan 16, 2007
Hi everybody,
I have two problems while using a analysis service cube as data source for a reporting service report.
1.) I've an individual time dimension which has day entries in the standard date format "mm/dd/yyyy". When using an parametric entry for the date hierachy the reporting offers me all entries as a list (some 1000 entries). Looking under report parameters I recognized that the input parameter is listed as of the type string. However I know that the underlying field and as well the hierachy in the cube is of the format datetime. Change it to datetime causes the reporting service to fail with the error message:
An error occured during local report processing.
The property 'ValidValues' of report parameter 'DIM...' doesn't have the expected type.
How can I use the parameter in the format datetime to restrict the time dimension? ...so that I can select the date over the calendar function.
2.) I have another dimension with the hierachy cycle which has the string format "year-month". I would like to use the selection of the date hierachy to create the restriction on the cycle hierachy. I.e. entering '01/16/2007' on the time dimension should write the value '2007-01' to a parameter which is then used to restrict the cycle hierachy. Experimenting with report parameters always caused the error message:
An error occured during local report processing.
An error has occured during report processing.
Query execution failed for data set 'DIM...'.
Query (1,453) The restriction by the CONSTRAINED-flag in the STRTOSET-function has been violated.
As I only allow single value entries I thought about changing the STRTOSET command in the underlying MDX query into STRTOMEMBER. However this didn't solve the problem.
How can I create an input for a restriction on a dimension based on a parameter with a self constructed string?
Thanks,
StSt
View 4 Replies
ADVERTISEMENT
Jan 23, 2006
Hi,
I've been trying to use Analysis Services 2005 Cube as a data source, query it via MDX and then use the data returned elsewhere in SSIS.
However, I've been unable to get this working and can't find any information regarding how this can be done. Surely it should be possible when I can get this working even in Excel?
I've looked in December edition of BOL and no luck - have also sent a feedback to BOL regarding this and have been told that "it should be possible, since there is a way to send SQL queries to AS." However the person I was speaking with knew of no one who had actually tried this scenario and to try posting here.
Any help as to how to get this done would be greatly appreciated.
NR
View 18 Replies
View Related
May 19, 2015
I have problems creating a cube with AMO.
I can add the cube to the database object and fill it with dimensions and a measuregroup (see code below).
If I call cube.Update() it says something like "Error in meta data manager. Cube has no measuregroups." (getting the message in german language)
The error in Microsoft.AnalysisServices.OperationException.Results.Messages is -1055653629
I can't find any documentation about this (or any other) error code in Microsoft documentation.
Here's my Code:
Cube newCube = database.Cubes.Add("MyCube","MyCube");
newCube.Language = 1031;
newCube.Collation = "Latin1_General_CI_AS";
CubeDimension dim = newCube.Dimensions.Add("dim1","dim1","dim1");
CubeAttribute attrib = dim.Attributes.Find("dim1Attr1");
[code]....
View 2 Replies
View Related
May 13, 2014
I have a cube that we are processing nightly via an Analysis Service Processing Task in SSIS. In order to increase the performance of the processing time, we elected to use a lot of rigid dimension attributes, and do a full process of everything in the SSIS task. The issue that I am having is that after that task completes, I need to go into Visual Studio to deploy the cube becuase we are unable to browse or use the cube. This issue seemed to start once we changed the SSIS Analysis Service Processing Task to do a full process on the dimensions, rather than an incremental.
I would expect that once development is done, and it is processed and deployed, that is it. My thinking is that the SSIS task should just update the already deployed cube,
View 2 Replies
View Related
May 6, 2008
I have a DTS package in SQL Server 2000 which brings together data from different sources, including from an Analysis Servcies cube, and compares it.
Usually this runs perfectly, but sometimes I get an unexpected internal error from the Data Pump task which queries the cube - no other information, just the error.
This is usually when I have run the package once (manually from Enterprise Manager), then changed a global variable and run it again.
The cube it is querying is a virtual cube and the measures are calculated cells (NOT calculated members).
We are on SP4 of AS so should be up to date.
Does anyone have any ideas?
Thank you
View 1 Replies
View Related
Nov 9, 2007
Hi, I know this is probably very simple but I am pretty new to this and have tried looking but cant seem to get the search criteria right. I have a database with a storeDate field which is of shortdatetime type. I am connecting to the database (MSSQL) via a stored procedure and returning all the records. I then use the code foreach (DataRow dr in ds.Tables[0].Rows) { DateTime dtTo = DateTime.Now; DateTime dtFrom = DateTime.Parse(dr["storeDate"].ToString()); TimeSpan diff = dtTo.Subtract(dtFrom); } I am basically trying to find out the age of the database entry by subtracting it from the current DateTime so i can delete records over a certain age. The problem (at least one of them!) is retrieving the "storeDate" object from the database and storing it in the dtFrom object. I have tried just assigning it directly as dtFrom = dr["storeDate"] and various other methods but I just don't know enough to assign it! Can anyone help me with this or spot any other mistakes in this process of removing old files automatically. Greatly Appreciated,Sean.
View 4 Replies
View Related
Jan 22, 2007
Hi,
I am using SQL Server Management Studio Express for creating my database. I also use the GUI tools for data entry instead of using T-SQL. Whenever I try to enter a value in a field that has a smalldatetime data type, it gives me an error message -
"Invalid Value for cell (row 1, column 2).
The changed value in this cell was not recognised as valid.
.Net Framework Datatype: Datetime
Error Message: Index was outside the bounds of the array.
Type a value appropriate for this data type or press ESC to cancel the change."
Now I have tried entering all different combinations in which one can enter a date or a time or both, including in the format I have specified in the windows regional settings, but I always get the same error message.
How do I input data into the field?
View 9 Replies
View Related
Jun 1, 2007
My other thread containg this same topic seems to have some error. It doesn't show up in the main 'SQL Server Database Engine' group at all. So I had to start a new thread instead.
Here's the link to the original - http://forums.microsoft.com/MSDN/ShowPost.aspx?PostID=1136124&SiteID=1
Here are the contents of the same -
Post#1
Orginally posted by me -
Hi,
I am using SQL Server Management Studio Express for creating my database. I also use the GUI tools for data entry instead of using T-SQL. Whenever I try to enter a value in a field that has a smalldatetime data type, it gives me an error message -
"Invalid Value for cell (row 1, column 2).
The changed value in this cell was not recognised as valid.
.Net Framework Datatype: Datetime
Error Message: Index was outside the bounds of the array.
Type a value appropriate for this data type or press ESC to cancel the change."
Now I have tried entering all different combinations in which one can enter a date or a time or both, including in the format I have specified in the windows regional settings, but I always get the same error message.
How do I input data into the field?
Post#2
Originally posted by Jens K. Suessmeyer -
Hi,
you are using a format SQL Serve ri snot expecting. Which User language did you configured for the accessing user and which date are you trying to insert ?
HTH, Jens K. Suessmeyer.
---
http://www.sqlserver2005.de
---
Post#3
Originally posted by me -
Hi,
I use only English as the default language for all programs, OS included. The date in question is not just one particular date, it is any date or time value, and I've been facing this issue ever since I started using SQL Server Express a year ago. Only I haven't used it much since, and need to seriously develop something now, that I bothered to ask the question here.
Some examples of the values I tried entering yesterday, and none of them worked. (I got the same error message for each value) -
1-1-2007
01-01-2007
01/01/2007
01,01,2007
01:01:2007
Jan 01, 2007 (this is the format I have specified for short date in the Win regional settings - MMM dd, yyyy)
I even tried entering time alongside with all those above figures in the format -
11:35 PM
11:35 AM
23:35
The only time value(s) I didn't try was/were - hh:mms tt - which is the time format specified in my Win regional settings, neither standalone, nor with the date values.
I also tried entering a time value standalone, without the date. Still no go.
(Also, as I have gleaned from previous posts, if all goes well and SQL Server accepts your data, then if you enter just a date value in a datetime field, then the field automatically gets populated with the value of the system time at that moment, and if you enter just a standalone time value, then the date part will be filled by the system date value on the date of the entry. Am I correct so far?)
Now I'm in a real fix because of the inability to enter date/time values.
Could you please help me out?
Post#6
Originally posted by me -
I don't understand. I can enter the datetime values in all the above mentioned combinations if I use an Insert or Update statement using T-SQL, but I can't seem to enter data in the datetime/smalldatetime fields at all if I try to use the GUI of Management Studio Express to enter data. (right click the table, select show table, and the grid view pops up). Ditto for using GUI tools of Visual Studio Express. Is this a bug in the Visual Studio (Express) software?
Also, my other concerns are, once I develop a front-end for data entry using VB, will I face the same issues with data entry in the datetime fields using the GUI of the front end? I can't test that right now, because I'm still learning VB, and cannot create the front end just yet.
Post#7
Originally posted by me this afternoon, but it never showed up on the page -
Alright, I have done a complete reinstall of Win XP, and have also reinstalled SQL Server Express. Prior to this, I had SQLExpress SP1, but now I have directly installed SP2.
Now I continue to face the same issue. SQL Server will not accept any value for any datetime field, unless it is entered as an SQL insert statement. It won't accept the value entered in the exact same format as the insert statement from the GUI mode of Management Studio Express, nor will it take any values from any GUI developed using VBExpress and the fill dataset method. It throws an error everytime. I don't know any other way of databinding and updating/inserting using VB at this time.
I am at my wits' end because of this. I ask again, is this a bug in SQL Server Express? If so how do I report it to MS and get my issue resolved? If not, even then how can I solve this problem?
Could someone please help me out? I am stuck and cannot use the product at all, without the datetime field.
View 29 Replies
View Related
Sep 17, 2015
The Member_Key we can get by the method suggested in the post, but when we get the Member_Key, Id as Measures/members then performance is very slow.
Is there any way i can get the Member_key in a set in rows section.
Like
With SET [UniqueName] AS [Geography].[Country].CURRENTMEMBER.UNIQUENAME
Select Measures.Value on Columns,
UniqueName on Rows
From Cube
I want the value as just like
Value
Employees, UniqueName
View 2 Replies
View Related
Mar 12, 2007
Finding the earliest datetime entry, and then updating the database on these reults.
I need to query a table of data that has multiple datetime entries in it relating to individual customer records. So one customer could have 1 entry, or it could have 10 entries. I need to be able to identify the earliest of these records, and then on this earliest record update a field value. Example:
My Fields in the table are as follows.
Log_ID, Cust_Ref_No, ActionDateTime, Action_Code
The Log_ID is the primary key, and I need to update the Action_Code field on only the earliest entry against a customer record i.e.
12345,ABCDEF,01/01/2007 00:00:01.000,6
12346,ABCDEF,01/01/2007 09:00:00.000,6
12347,ABCDEF,01/01/2007 17:00:00.000,2
In the above I need to change the first record Action_Code from a 6 to a 1, but leave all other records unaffected.
All help greatly appreciated, Thanks : o )
View 10 Replies
View Related
Nov 24, 2015
I am using
SSAS: version 2008
Excel: version 2013
I am connecting to SSAS cube from Excel and I have date dimension with 4 fields (I have others but I don't use it for this case). I created 4 fields in order to test all possible scenarios that I could think of:
DateKey:
- Type: System.Integer
- Value: yyyyMMdd
Date:
- Type: System.DateTime
DateStr0:
- Type: System.String
- Value: dd/MM/yyyy (note: I am not using US culture)
- Example: 01/11/2015
DateStr1:
- Type: System.String
- Value: %d/%M/yyyy (note: I am not using US culture)
- Example: 1/11/2015
Filtering on date is working fine:
Initially, in excel, filtering on date was not working. But after changing dimensional type to time, and setting DataType to Date, as mentioned in [URL] filter is working fine as you can see in the picture.Grouping on date is not working:
I have hierarchy in my Date dimension and I can group based on hierarchy, no problem. But user is used to pre-build grouping function of excel, and he wants to use that. Pre-build functions of Excel, Group and ungroup seems to be available as you can see in following picture:
But when user clicks 'Group', excel groups it as if it is a string, and that is the problem. User wants to group using pre-build grouping function available in Pivot table. I also find out that Power Pivot Table does not support this excel grouping functionality. And if I understood well, this pre-build grouping functionality of excel, needs to do calculation at run time, and that is not viable solution if you have millions of rows. So Power pivot table does not support pre-build grouping functionality of excel and hence we need to use dimension hierarchy to do the grouping. But I am not using Power Pivot table, I am using simple Pivot Table. So I expect grouping functionality to be working fine. Then I tried to do simple test. I created a simple data source in excel itself. And use it as source of my Pivot table. Then grouping is working fine. The only difference that I can see is (When double click the Measure value in Excel),For date values of my simple test, excel consider them as 'Date'.
For date values of my data coming from cube, excel consider them as 'General'
2.1. But value here is same as it was in simple test.
2.2. 'Date Filter' works just fine.
2.3. If I just select this cell and unselect it, then excel change type to 'Date' though for that cell.
2.4. I have created 4 different types of fields in my date dimension thinking that values of attribute of my dimension might be the problem, but excel consider 'General' for all of them.
2.5 This value (that can be seen when double clicking on measure) comes from 'Name Column' of the attribute. And the DataType defined is WChar. And I thought that might be the reason of issue. And I changed it to 'Date'. But SSAS does not allow it to change to 'Date' giving error : The 'Date' data type is not allowed for the 'NameColumn' property; 'WChar' should be used.
So, I don't know, what is the puzzle piece that I am missing.
1. Date filter works, group does not work
2. Excel consider it as 'General' string.
3. SSAS does not allow to change 'NameColumn' to Date.
View 2 Replies
View Related
Oct 31, 2007
Hey,
What is the best way to query two datetime values to see if they are alike? I need to determine if an [AccountEndDate] is today (both values are datetime). Using "Like" does not work.
Thanks!
View 4 Replies
View Related
Jul 29, 2007
If I do the following
SELECT *
FROM MyTable
WHERE DateCreated = '27/07/2007'
It fail's, what am I doing wrong?
Thanks
View 7 Replies
View Related
May 30, 2015
I would like to know the best practice for running analysis service in terms of port usage. Is it better to run on a specific port or have dynamic ports ? We have clustered servers that run default on 2383 but not sure with non clustered what's the best way to get performance.
View 2 Replies
View Related
Aug 5, 2007
Hi all,
1. I need to query a DateTime field, I'm using the following which works but I was just wondering if there is a faster or better way to query a DateTime field, omitting the Time part:
CAST(FLOOR(CAST(dbo.tblContactLog.DateCreated AS FLOAT)) AS DateTime) <=' + '''' + @EndDate + ''''
2. Also, I'm using the getdate() function to insert the date the record was entered, this always puts in the Date and the Time, is there a way to just put in the Date part?
Thanks
View 1 Replies
View Related
Aug 6, 2015
I want to find out if it is possible to create a role in a cube without an AD account, e.g. using a GMail email address.
View 3 Replies
View Related
Mar 29, 2008
Hello all,
I am having an issue querying DateTime. The field I am querying on holds a full datetime stamp, such as "29/03/2008 13:30:00". I need to query the Date only, and return the results that match the specified date regardless of the time stamp.
So my query would look like this:-
SELECT * FROM table WHERE Date = '29/03/2008'
At the minute my code returns nothing. Is there way way to query the Date only ??
Thanks,Sean
View 5 Replies
View Related
Feb 7, 2008
Hi,
I was talking to my boss to day and our report request are not very consistant. We always having someone coming back to change something in our report. We were thinking of useing something called the Cube Analysis. Then it give our employees the raw data for them to run any standard query for themself. We have folks that want a report one way, but then they changed their minds and we are creating yet another report 4 or 5 times. what are your thoughts about this type of database?
View 6 Replies
View Related
May 9, 2012
I have 2 tables that I would like to summarize a couple of columns for a full day of production(12:00:00 AM to 11:59:59 PM) based on passed variables. Here are my Tables:
Order_Details_tbl
PlantID – IngredientID – AmountBatched – DateTime
1 – 8 – 1000 – 4/30/2012 1:23:12 PM
1 – 8 – 1000 – 4/30/2012 4:23:12 PM
1 – 8 – 1000 – 5/1/2012 1:23:12 PM
1 – 8 – 1000 – 5/1/2012 10:23:12 PM
1 – 8 – 4500 – 5/3/2012 1:23:12 PM
1 – 8 – 11000 – 5/7/2012 1:23:12 PM
1 – 8 – 1000 – 5/7/2012 10:23:12 AM
1 – 8 – 1000 – 5/7/2012 1:23:12 PM
1 – 8 – 1000 – 5/7/2012 1:23:12 PM
1 – 8 – 1000 – 5/8/2012 9:23:12 AM
1 – 8 – 1000 – 5/8/2012 4:23:12 PM
1 – 8 – 1000 – 5/8/2012 2:23:12 PM
Order_Details_Details_tbl
PlantID – IngredientID – AmountBatched – DateTime
1 – 8 – 100 – 4/30/2012 1:23:12 PM
1 – 8 – 11000 – 5/4/2012 11:23:12 PM
1 – 8 – 11000 – 5/7/2012 11:23:12 PM
1 – 8 – 1000 – 5/8/2012 11:23:12 AM
1 – 8 – 1000 – 5/8/2012 1:23:12 AM
1 – 8 – 1000 – 5/8/2012 11:23:12 PM
1 – 8 – 1000 – 5/8/2012 5:23:12 PM
1 – 8 – 1000 – 5/8/2012 2:23:12 PM
I will pass in the @PlantID int, @IngredientID int, and @Days int. I want to sum the AmountBatched from both tables and display the total for each given day. The @Days will indicate the number of days to query off of previous to the current date. I would also like to eliminate weekends from the results. For example when stored procedure is run passing the following values @PlantID = 1, @IngredientID = 8, and @Days = 14. If date procedure is run is 5/9/2012, would like to summarize for 4/25/2012 to 5/8/2012 excluding weekends if possible.
Results
Date – AmountBatched
4/25/2012 – 0
4/26/2012 – 0
4/27/2012 -- 0
4/30/2012 -- 2100
5/1/2012 -- 2000
5/2/2012 -- 0
5/3/2012 -- 4500
5/4/2012 -- 11000
5/7/2012 -- 25000
5/8/2012 – 8000
Notice 4/28, 4/29, 5/5, and 5/6 are eliminated from the results, which are weekends. Is this possible in a sql stored procedure? I am writing an app in vb .net and am hoping to get the results I need in a single call to sql server and not have to make several calls back. I have not worked with advanced datetime methods in sql server before.
View 6 Replies
View Related
Jun 21, 2007
I'm making my first attempt at creating a cube using Analysis Services based on my exisiting datamart. Datasource, views, and dimensions have been defined. But comes deploying the cube, it's giving the error saying "A connection cannot be made. Ensure that the server is running." The Deploy Target server and database are the same where my datamart is. Or, maybe I don't know what I'm doing.
Would appreciate any suggestion for my enlightenment. Thanks
View 1 Replies
View Related
Jun 30, 2007
I setup Hiarchy in the dimentions of my cube, however when I go and look at it via proclarity, I can't see the hiearchy there.
I have one table that has:
Category
Subcategory
Partnumber
And I have the hiearchy set from Subcategory to partnumber.
Then I go into proclarity and limit the category by "my catname" and I still see the 8000 partnumbers in the list.
Any ideas?
View 1 Replies
View Related
Jul 20, 2005
I have a (hopefully typical) problem when it comes to cube design. Westore millions of product records every year, broken down bymonth/quarter. Each product can be assigned to various heirarchialclassification groups etc. The data in an OLTP DB occupies roughly100G for a typical year.We're looking at breaking this out into OLAP to provide faster accessto the data in various configurations and groupings. This is not aproblem, as this is the intended use for Analysis Services.The problem is that we apply projection factors on the product pricesand quantities. This would be ok if it only happened once, however,this happens every quarter (don't ask why). The projection factorschange 4 times a year, and they affect all historical product records.This presents a challenge because to aggregate the data into a usefulconfiguration in the cubes, you throw out the detail data, but thismeans throwing out the price and quantities which are needed to applythe projection.So if you have Product A at $10 and Product B at $20, and roll both upinto Category X, you'll have $30, but you'll lose the ability to applya projection factor of .5 to Product A and .78 to Product B. They'rerolled up.I don't want to regenerate the cubes every 3 months. That's absurd.But we can't live without the ability of projection theprices/quantities on a product level (detail level). So how can thisbe achieved when the other cubes are created at a higher level withless details and sums of the detail data?My initial guess is that we have to update the product data, and thenreaggregate all the other data that is built upon that product data.Is there any other way to apply math to the data on the way out?Thanks in advance!Regards,Zach
View 2 Replies
View Related
May 6, 2015
i want to create cube withe 2 fact tables. is it possible?? if it is could you show me how !!
View 2 Replies
View Related
May 21, 2015
how can use this mdx script in the calculation part of a cube, will i simply dump it in the script form by starting with the 'create member current cube.
[measures].[test]'
select
[measures].[abc] on 0,
[xyz].[xyz].(&0):[xyz].[xyz].(&60) on 1
from
(
select
(tail([month].[month].[month].members,6))on 0
from
[cube])
View 3 Replies
View Related
May 18, 2015
The data attached below is from a Fact table. When this data is browsed in the Cube the end user is only interested in value of Measure 1 when it is not equal to zero. Measure 1 is a base measure .how to suppress the value 0 for Measure 1 in the Cube.
DimesionKey1
DimensionKey2
DimensionKey3
Measure 1
Measure 2
Measure 3
[code]...
View 4 Replies
View Related
Nov 23, 2015
I know where the data files are etc, but what is the physical structure of a cube like on disk?
Logically we see the data as a star. Is the physical file akin to a star also? Or is a single file a measure group containing all the required member and measure data - thereby eliminating the need for physical join operators.
View 2 Replies
View Related
Oct 14, 2015
I am planning to implement the security in my cube..
Total sales is 1000..
Customer Sales
A 100
B 200
C 300
D 400
Total Sales 1000
When i want to give access to the customer A, he can capabule of viewing only A value 100... But the problem is A is able to see total sales 1000.. How can i restrict the sales a value to 100 in the cube.. Where i have to set the property to fix this issue.....
View 3 Replies
View Related
Nov 22, 2015
Is it correct to say that for each cube you can have only one Fact Table? I am having a funny dispute just now.
According my experience I never built cubes with more than one fact table, if I want take data from more than one table I write a view and I use it as Fact table...but a cube with two or three fact tables? Never tried..
View 3 Replies
View Related
Jun 12, 2006
i am currently trying to build a distinct count on my cube (mssql2005 analysis services).But after i added the discount count on the field i want to and start the processing, the following errors appear.Errors in the OLAP storage engine: The sort order specified for distinct count records is incorrect.
View 17 Replies
View Related
Aug 4, 2015
I have a cube. Its xml is different at some point than its design view. Suppose for some dimension and its attributes, source table is different than what it showing in the properties window for them..
Is this possible? How to read cube xml because there are repeating tags in it. There are two type if dimension tags.. one has only attributed and other has all properties.
View 7 Replies
View Related
Dec 13, 2010
Is it possible to have more than one cube under one SSAS database? For example I have a database "Test" and in this the cube exist is "TestCube", is iit possible to deploy another cube "TestCube2" under the Test databse?
If yes then what is the process to do that, the reason I am asing is there are some common dimensions used n both the cubes and I am not sure what is the best way so that I can use the shared dimension?
View 6 Replies
View Related
Nov 3, 2015
How can we select translated text of cube translations, like measures, dimensions, dimension attributes. I have below query which return translations of dimension attribute's memebers
WITH
MEMBER Measures.CategoryCaption AS Product.Category.CurrentMember.MEMBER_CAPTION
MEMBER Measures.SpanishCategoryCaption AS Product.Category.CurrentMember.Properties("LCID3082")
MEMBER Measures.FrenchCategoryCaption AS Product.Category.CurrentMember.Properties("LCID1036")
SELECT
{ Measures.CategoryCaption, Measures.SpanishCategoryCaption, Measures.FrenchCategoryCaption } ON 0
,[Product].[Category].MEMBERS ON 1
FROM [Adventure Works]
I am getting translations of product category members but I want to get translated text of "Category"?
View 2 Replies
View Related
Mar 31, 2006
Hello,
In our project, we would like to use the same data source for our analysis service database cubes and for our reporting service reports.
I created the analysis service project first, deployed successfully. When trying to setting up the data source in the report model project, I selected the "create a data source based on another object", and then selected the "create a data source based on an analysis service project". However, there is no analysis service project to select, and no browse button to see where the reporting service is looking for analysis service project either.
I have tried creating a new analysis service project with data source views, cubes, dimensions and all the stuff, but still cannot see the analysis service project in the drop down box to be selected for my reporting model project data source.
As I am fairly new to the reporting service, I'm sure I'm missing something, but couldn't find much information in the help or on the web. Any suggestion would be much appreciated.
Thank you very much,
Annie
View 5 Replies
View Related
