Db Is Of 10 GB, Backup Size Is Less Than 10 Gb
Feb 13, 2008My database is of 10 gb, when backup is taken the size of .bak file is less than 10 gb.
Why?
My database is of 10 gb, when backup is taken the size of .bak file is less than 10 gb.
Why?
Why is it that lately our full backup (.bak) file size is more than 2x the size of the actual database file size (.mdb)?
View 9 Replies View RelatedI have a log file that is approximately 50 GIG. I backed up just the log and the file size of the .bak is 192 GIG . Why is this? Shouldn't it be closer to the 50 GIG.
Normally I wouldn't let log grow this much. But we are in process of getting new server up and running and don't have backups going yet. They are working on getting that up and running this week.
So I did a log backup to give me back some log space for now but was concerned when I saw the size of the .bak file.
When I view media contents of the backup device it shows one tranaction log back up and size of 192 GIG.
What is up with this. I know in SQL 2000 the log backup files where never this big. they were about the size of the log itself.
Any ideas?
Stacy
I need to know how big SQL Server 7 backup files are in comparison to the database size. For example if I have a database that is 300 Mb and I do a complete backup to disk with SQL Server 7 will the backup file be about 300 Mb?
Thanks,
Mike
Hi all,
How can I see what is exact size of SQL server backup file while backup is running. The process is running for more than 2 hours, it is chewing up disk space (it already took about 20G), but the size of backup file is still showing as 0.
Thanks in advance
what will be size of backup file(FULL) for 1TB database. Just wanna make sure backup is done right.I did a full backup of 1TB database and backup file came like 507GB. I am using GUI for backup.But it completed 100% but didn't give me the screen'The backup is completed successfully' .it says executing---0%
View 5 Replies View RelatedI have a MS SQL 2000 dB that is 3GB, the transaction log is about 2GB.I do a full dB backup every night. My question is, shouldn't thetransaction log shrink down to next to nothing after a full dB backup?D.p8oust7eh+
View 2 Replies View RelatedI recently started using Differential backups. They are working but are growing in size a lot quicker than I expected.
The backups are growing by 2.5GB every day although the total size of all
transaction backups is under 350MB. I would have imagined that the total transaction log backups would be a good indicator of total database changes and therefore the differential backups would approach this figure.
Please explain!
How does backup database command works? I don't see size of database backup file increasing while backup is in progress OR is it locked till the backup is finished.
Thanks.
Hi all,
please show me the way how to calculate the size of a database in SQL 2000. Whith this size we have already calculated, how much space need to make a backup file for this database.
thanks.
I have installed the sql server management studio express for my express edition of studio 2005 for backup purposes.
I need to automate backing up my database.
I created a backup script and have successfully got sched tasks to backup each night. the problem is it is not overwriting the previous data. My first backup was 1 gig, the next night the file was 2 gig, the next it was 3 and so on.
This is not due to that much data being added to the db.
When I go to restore, I have the option to restore any of the 3 backups. I would like my backup to be a single image of the database at the last backup time. How can I do this?
hello guys,
Please bare with my english.
Is there a way to compute for the backup file size of the database.
Example.
DatabaseName
TEST_DB
*in MB
DataSize DataSize_Used DataSize_UnUsed
150.00 81.00 70.00
LogSize LogSize_Used LogSize_UnUsed
30.00 1.00 29.00
When I run a backup for TEST_DB ,
*base on this figure - can we compute the the estimated backup file size for TEST_DB?
Has anyone come across a more accurate method than sp_spaceused to estimate the size of a full database backup for SQL Server 2000 ?
I have found this to have too great a variance (even after running updateusage) to rely on any accuracy for it. I have also looked at perhaps using the ALLOCATED Pages indicated in the GAM pages but this also seems to be pretty inaccurate.
I have a number of servers where space can be limited and backups using Maintenance Plans have occasionally failed because they delete the old backups AFTER they do the latest one. I am writing a script which can check the space remaining and adjust the backup accordingly but the variance I have observed so far with sp_spaceused is too great.
Any ideas welcomed.
Dear All,
I am using Append to media backup option in 2000 Version. The size of backup is growing. how can I best create the maintenace plan to clear the history or clear the old files in BACKUP (.bak) file but still be able to restore point in time from same physical file. I
Is there any side effect of doing that.
Thanks,
Does any one know what could be making the size of a backup get so big in SQL server?
I noticed if you back-up the same database in Enterprise Manager over and over (without making any changes to the database), the size of the backup gets bigger and bigger. To get around this I simply erase the backup and create a new one.
Now I'm experiencing the same kind of problem, different situation. I decided to make very few changes to my database. If anything, I shrunk the size of the tables and stored procedures.... Now all of a sudden my database backup is 7 times larger.
What could be increasing the size so much, if I haven't increased the amount of tables or stored procedures?
What is the log file about? Mine is huge? Is there a way to reset it or clear it?
any help would be great.
Thank you,
Alec
I have got SQLv6.5 SP5a with SMS1.2 SP4 on seperate Alpha boxes. I have automated the backups so they are scheduled for after hours. SMS gets backed up first and TEMPDB shortly afterwards. However, since a back log in SMS MIFS has happened, the TEMPDB backup displays of 100,000pages backed up. When you back it up on its own, it only shows 170+ pages.
The SMS DB is 600MB in size, the Log is 210MB, Open objects is 5000, and TEMPDB is set 210MB on its own device.
Any ideas
I'm having a problem. When I use the SQL query to make a backup of the database, it worked fine. But everytime I use it, the backed-up file's size kept growing in size. Say I have the file, test.bak whose filesize is 450 MB then I run a new backup to overwrite the existing test.bak file, it just end up as 900 MB. If I run it again, it become 1350 MB and so on.
Is there a way to prevent that from happening?
finding the database size from the backup file.I have SQL 2012 backup file, is there any way to find the estimated database size from the backup.I tried restoring , i got an error saying " no space need additional xxx bytes " ...does this error gives the exact space needed to restore ?
One more question....one of the backup file size is 7.2 GB, when i try to restore it ....it throws error saying it needs 292GB extra space while only 100 Gb is available. How come 392 Gb sized database becomes 7.2 Gb .bak file ?
I have a question regarding FUll and differential backup.
We we take full or diff back up, does it create lot of logs ie. Does full or diff backup has any impact on log size?
Thanks
In a recent attempt to keep the size of my transaction log files down I altered the schedule of my SQL Server log backups from running every 15 minutes from 07:00 to 19:00 to run every 15 minutes.My company also uses a Dell AppAssure application to also take backups. The backups are of the entire drives so I don't this will affect the size of my SQL log files but I did notice that AppAssure has a tick box to truncate the SQL logs so it made me wonder that it could affect the size of my log file. The Appassure backups currently run every 15 minutes from 07:00 to 19:00. I'm wondering if I would be able to maintain my log files at a smaller size if I ran this every 15 minutes from 07:00 to 07:00.
View 2 Replies View Related
In my enrv. DBA just migrated SQL Server 2000 Databases from WINDOWS 2000 to WINDOWS 2003 Enterprise Edition and the same SQL version. The problem which i need to analyse
1. Why the full backup size is occupying only 70GB when DB size is 120GB?
Here is the situation
Full Backup is taken once every day ---- 70gb
Diff Backup Taken every 3 hrs till 5 PM ----- size is 50GB
Transaction log backed up every 10 min uptill 8 PM ----- not a big size
I am really confused as to why Full DB Backup is taking only 70GB.............Can some one please throw a Light on how the SQL Server 2000 Backup functions.
My backups are failing sometimes.My db size is around 400 GB and we are taking backup to the remote server. Free size available on the disk is showing 600 GB but my database full backup run more than 10 hrs and failed. The failure reason is there is not enough space on the disk.
What could be the possible failure reasons? It has more than the the database size on the backup server but why it is showed that msg on the job failures. I noticed same thing occurred couple of times in the past.
Is there any way to find how much the backup file will be generate before we run the backup job?
i.e. If we run the full backup of test1 database now, it will generate ....bak file for that test1 db
currently we are using maintenance plan and with compression (2008R2) and the database has TDE enabled
I am trying to resize a database initial log file from 500M to 2M. I€™m using€?
ALTER DATABASE <DBNAME> MODIFY FILE ( NAME = <DBLOGFILENAME, SIZE = 2 ) "
And I'm getting "MODIFY FILE failed. Specified size is less than current size." I tried going into the database properties and setting the log file to 2M, but it doesn€™t keep the changes.
Any help with this process?
I installed sql 2005 a while back. Then I recently found out my file system was fat32 (I don't understand why the hardware people did this...) and I had to convert to NTFS. Naturally the sql service no longer worked so I uninstalled inorder to reinstall now I can't reinstall it I keep getting this message
native_error=5039, msg=[Microsoft][SQL Native Client][SQL Server]MODIFY FILE failed. Specified size is less than current size.
I'll try to post the full log in a new post.
Hi folks,Can anyone enlighten me here? I'm trying to use a SPROC which, when supplied with an int, looks up the table and returns certain columns from it. I'm using a SqlCommand, here's my codebehind: ------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------ SqlCommand dataSource = new SqlCommand("retrieveData", new SqlConnection(dbConnString)); dataSource .CommandType = CommandType.StoredProcedure; dataSource .Parameters.AddWithValue("id", poid); dataSource .Parameters.AddWithValue("title", title).Direction = ParameterDirection.Output; dataSource .Parameters.AddWithValue("creator", creator).Direction = ParameterDirection.Output; dataSource .Parameters.AddWithValue("assignee", assignee).Direction = ParameterDirection.Output; etc, etc... And the SPROC:------------------------------------------------------------------------------------------------------------------set ANSI_NULLS ONset QUOTED_IDENTIFIER ONGOALTER PROCEDURE [dbo].[retrieveData] @id int, @title varchar(50) OUTPUT, @creator varchar(50) OUTPUT, @assignee varchar(50) OUTPUT, @contact varchar(50) OUTPUT, @deliveryCost numeric(18,2) OUTPUT, @totalCost numeric(18,2) OUTPUT, @status tinyint OUTPUT, @project smallint OUTPUT, @supplier smallint OUTPUT, @creationDateTime datetime OUTPUT, @amendedDateTime datetime OUTPUT, @locked bit OUTPUT AS /**SET NOCOUNT ON; **/ SELECT [title] AS [@title], [datetime] AS [@creationDateTime], [creator] AS [@creator], [assignee] as [@assignee], [supplier] as [@supplier], [contact] AS [@contact], [delivery_cost] AS [@deliveryCost], [total_cost] AS [@totalCost], [amended_timestamp] AS [@amendedDateTime], [locked] AS [@locked] FROM purchase_orders WHERE [id] = @id; ------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------ The id being passed in is definately not null, and is set to a value of an item I know exists. The resulting error is:
Exception Details: System.InvalidOperationException: String[1]: the Size property has an invalid size of 0.Line 63: retrievePODetails.Connection.Open();Line 64: retrievePODetails.ExecuteNonQuery();[InvalidOperationException: String[1]: the Size property has an invalid size of 0.] System.Data.SqlClient.SqlParameter.Validate(Int32 index) +717091... ... Can anyone see anything I'm missing? Thanks,Ally
Using C#, SQL Server 2005, ASP.NET 2, in a web app, I've tried removing the size from parameters of type NCHAR, NVARCHAR, and VARCHAR. I'd rather just send a string and let the size of the parameter in the SP truncate any extra chars if need be. I began getting the error below, and eventually realized it happened only with output parameters, as in the code snippet below.String[3]: the Size property has an invalid size of 0. par = new SqlParameter("@BusinessEntity", SqlDbType.NVarChar); par.Direction = ParameterDirection.Output; cmd.Parameters.Add(par); cmd.ExecuteNonQuery();What's the logic behind this? Is there any way around it other than either finding out what the size should be, or assigning a size larger than would ever be needed? ThanksMike Thomas
View 6 Replies View RelatedI have one db test with one .mdf and .ldf file...mdf file size is 100mb and for some reson i removed all the tablesfrom that .mdf file and transfer it into new secondary file so all thetables moved into secondary file now i want to reduce the first .mdffile from 100 mb to 50mb is that possible,it's showing 90mb is free.Please reply
View 1 Replies View RelatedI want to know encrypted data's size for designing database field size.
For example, cardnumber varchar(20) Encrypted by Triple_DES and PassPhrase, How match size does need to encrypted data store field.
I think the size does not depend to PassPhrase char length.
Regards,
Yoshihiro Kawabata
Hi there
I'm getting this message on my third automated backup of the transaction logs of the day. Both databases are in full recovery mode, both successfully backed up at 01.00. The transaction logs backed up perfectly happily at 01:30 and 05:30, but failed at 09:30.
The only difference between 05:30 and 09:30's backups is that the log files were shrunk at 08:15 (the databases in question are the ones that sit under ILM2007, and keeping the log files small keeps the system running better).
Is it possible that shrinking the log files causes the database to think that there hasn't been a full database backup?
Thanks
Jane
I am getting error to run stored procedure using executenonquery method. The Stored Procedure is having OUTPUT parameter.
ExecuteNonQuery statement is called using SqlHelper.
Error : String[18]: the Size property has an invalid size of 0
Just wanted to know what is a general rule of thumb when determining log file space against a database's data file.We allow our data file for our database to grow 10%, unlimited. We do not allow our log file to autogrow due to a specific and poorly written process (which we are in a three month process of remove) that can balloon the log file size.Should it be 10% of the Data file, i.e. if the Date file size is 800MB the log file should be 8MB?I realize there are a myraid of factors that go against file size but a general starting point would be nice.ThanksJeff--Message posted via http://www.sqlmonster.com
View 4 Replies View RelatedThe Tabular model is showing 19 GB on disk, but it is acquiring around 40 GB in memory.
View 3 Replies View RelatedHi,
An MSSQL DB running SAP indicates a smaller DB size (MMC & SAP) than the actual physical size. The difference is about 8 GB.
A lot of records were deleted before this. Did they remain in the DB as NULL values or something ?
Does anyone know what the reason for this could be ? And how to clean this up ?
Thanks in advance,
Paul