Dbbc Not Logging Db Name In Error Log Correctly?
May 2, 2007
In the SQL error log it is not showing the actual database that was checked. Below is the entries for user databases. What gives?
2007-05-01 18:20:36.28 spid99 DBCC CHECKDB (master) WITH no_infomsgs executed by
2007-05-01 18:20:37.64 spid99 DBCC CHECKDB (mssqlsystemresource) WITH no_infomsgs executed by
2007-05-01 18:20:38.20 spid99 DBCC CHECKDB (master) WITH no_infomsgs executed .
2007-05-01 18:20:39.54 spid99 DBCC CHECKDB (mssqlsystemresource) WITH no_infomsgs executed by
2007-05-01 18:20:40.21 spid99 DBCC CHECKDB (master) WITH no_infomsgs executed by
2007-05-01 18:20:41.56 spid99 DBCC CHECKDB (mssqlsystemresource) WITH no_infomsgs executed by
View 4 Replies
ADVERTISEMENT
Oct 22, 2007
I have the following query in an ExecuteSQL Task:
Insert Into Table2
Select * From Table1 Where Column1Val = '4'
As you can see, I don't need any parameters so I havent configured any. Also, there should not be any result set so I shouldnt need to configure a resultset parameter.
Why is the above query failing with
Problems with the query, "ResultSet" property not set correctly, parameters not set correctly, or connection not established correctly
View 4 Replies
View Related
Nov 21, 2007
I click on menu item SSIS and enable logging to my SQL Database (SSIS log provider for SQL Server). When I run the package it runs fine for the first time. Upon subsequent runs I get the following error.
[Log provider "SSIS log provider for SQL Server"] Error: SSIS Error Code DTS_E_OLEDBERROR. An OLE DB error has occurred. Error code: 0x80040E14. An OLE DB record is available. Source: "Microsoft OLE DB Provider for SQL Server" Hresult: 0x80040E14 Description: "There is already an object named 'sysdtslog90' in the database.".
It seems like I need to drop the table every time to avoid this error. Is there a way I can log all package logs to single table historically? Any weblink or tip is appreciated.
Thanks!
Palak Mody
View 3 Replies
View Related
Jun 18, 2007
Greetings,
I am developing a package on my local workstation. I have defined two logging service providers. One is for SQL Server and the other is for the Windows Event Log. I am using the Dts.Log method in a script task to write log entries.
Logging is working properly with the SQL Server provider and rows are being inserted into the sysdtslog90 table. However, the only events that are being logged in the Windows Event Log are the package start and end events which I believe SSIS is doing automatically anyway.
Is there something I need to do to enable WIndows Event Log logging other than defining a log provider and making sure it is checked active? Won't SSIS write to two different logs with one Dts.Log call? Any ideas on what might be going wrong with my approach?
Thanks,
BCB
View 3 Replies
View Related
Apr 15, 2008
Hi all,
I am getting the following error when I log into SQL server using MS SQL Server Management Studio.
"An error has occurred while establishing a connection to the server. When connecting to SQL Server 2005, this failure may be caused by the fact that under the default settings SQL Server does not allow remote connections. (provider: TCP Provider, error: 0 - No such host is known.) (.Net SqlClient Data Provider)".
I tried to allow remote connections using Surface Area Configuration, but it is not allowing me to do so.
I am not sure what I need to do. Anybody, please advice.
Thanks & Regards
View 20 Replies
View Related
Jun 18, 2007
Hey all
I'm using the Execute SQL Task to import error messages into a table. I'm using the following:
"INSERT INTO SSISLog (EventDescription)
VALUES (" +@[System::ErrorDescription]+")"
I've got an import task with deliberate errors in the file to be imported to test the error logging task. When I execute it, I get the following messages:
[Execute SQL Task] Error: Executing the query "INSERT INTO SSISLog (EventDescription) VALUES (An OLE DB error has occurred. Error code: 0x80004005. An OLE DB record is available. Source: "Microsoft SQL Native Client" Hresult: 0x80004005 Description: "Invalid character value for cast specification". )" failed with the following error: "The name 'An' is not permitted in this context. Only constants, expressions, or variables allowed here. Column names are not permitted.". Possible failure reasons: Problems with the query, "ResultSet" property not set correctly, parameters not set correctly, or connection not established correctly.
[Execute SQL Task] Error: Executing the query "INSERT INTO SSISLog (EventDescription) VALUES (There was an error with input column "IssueNo" (94) on input "Destination Input" (68). The column status returned was: "The value could not be converted because of a potential loss of data.". )" failed with the following error: "The name 'There' is not permitted in this context. Only constants, expressions, or variables allowed here. Column names are not permitted.". Possible failure reasons: Problems with the query, "ResultSet" property not set correctly, parameters not set correctly, or connection not established correctly.
[Execute SQL Task] Error: Executing the query "INSERT INTO SSISLog (EventDescription) VALUES (The "input "Destination Input" (68)" failed because error code 0xC0209077 occurred, and the error row disposition on "input "Destination Input" (68)" specifies failure on error. An error occurred on the specified object of the specified component. )" failed with the following error: "The name 'The' is not permitted in this context. Only constants, expressions, or variables allowed here. Column names are not permitted.". Possible failure reasons: Problems with the query, "ResultSet" property not set correctly, parameters not set correctly, or connection not established correctly.
[Execute SQL Task] Error: Executing the query "INSERT INTO SSISLog (EventDescription) VALUES (The ProcessInput method on component "Destination - tbl_clients" (55) failed with error code 0xC0209029. The identified component returned an error from the ProcessInput method. The error is specific to the component, but the error is fatal and will cause the Data Flow task to stop running. )" failed with the following error: "The name 'The' is not permitted in this context. Only constants, expressions, or variables allowed here. Column names are not permitted.". Possible failure reasons: Problems with the query, "ResultSet" property not set correctly, parameters not set correctly, or connection not established correctly.
[Execute SQL Task] Error: Executing the query "INSERT INTO SSISLog (EventDescription) VALUES (Thread "WorkThread0" has exited with error code 0xC0209029. )" failed with the following error: "The name 'Thread' is not permitted in this context. Only constants, expressions, or variables allowed here. Column names are not permitted.". Possible failure reasons: Problems with the query, "ResultSet" property not set correctly, parameters not set correctly, or connection not established correctly.
Any ideas?
Thank you in advance
Rupa
View 4 Replies
View Related
Oct 17, 2007
Hi,
I decided to use the SQL Server log provider to store logging data of all my Integration Services packages. I also created some reports about this data for operating purposes.
I have a problem occurs the name of the executing package is not always written to the log,but the name of the single task which failed. But that is not very useful information for operating, because I do not see any chance to get the name of the package by the information which is logged in the sysdtslog90 table in the database which I defined for SSIS Logging.
How do I configure the package to always log the package information into the table, too?
Best regards,
Stefoon
View 5 Replies
View Related
May 7, 2002
Hi,
How can I avoid certain messages from SQL Server being recorded into the Event viewer ?
For example, every time I truncate the transaction log with 'Backup log with truncate_only', It is being recorded into the Event viewer as an Error. But, I know that it is not an error.
How can I avoid this ?
Thanks
View 1 Replies
View Related
Feb 15, 2007
Hello,
I am running some DBCC checks as a routine maintenance task on my sql server 2000 servers. I am running DBCC CHECKDB, DBCC CHECKCONSTRAINTS and DBCC CHECKCATALOG. I have established a set of procedures and tables to capture the output from the error log after running these DBCC commands. After running all three, it appears the same info captured for CHECKDB is not logged for these two: CHECKCONSTRAINTS and CHECKCATALOG. Does anyone know why these are not logged and if it is even necessary for me to run these 2 extra DBCC checks? If not, can anyone recommend what database consistency checks should be executed on a daily basis for a production database server?
DBCC CHECKDB (DBNAME) executed by lshores found 0 errors and repaired 0 errors. Elapsed time: 0 hours 20 minutes 32 seconds.
View 1 Replies
View Related
Dec 22, 2007
Hi,
I have a small requirement in SSIS Error Logging Mechanism.
Presently in my SSIS package i am using a File Connection Manager for creating a Log file.
I have a problem on this regard. Every time when i am executing my DTS package, the error log messages are getting appended to my error log at OS level (say D:error_messg.log). And for this reason whenever my DTS package is getting executed the size of the file is keep on increasing and there by killing my disk space.
I have a requirement for this error logging mechanism. At any time my log file should not exceed more than 20MB.
Or can we remove the log events a week ago or say more than 2 days or say. Just ensuring the log file do not fill up the disk space eventually.
How can we do this?
Any suggestions are greatly appreciated.
Thanks & Regards
View 4 Replies
View Related
Jan 15, 2008
This is the first time I've used SQL Server Integration Services, and I have it installed with SP2 applied on my local machine. I have created a Package, and dropped a Message Queue Task on it. I have pointed the Message Queue Connection Manager at a private queue on my machine. I have set the "Message" property to "Send message", I have changed the message type to "String Message" and entered "Test string" into the StringMessage property. When I execute the package (by clicking the "Start debugging" button on the toolbar), I get the following error message in the Execution Results:
[Message Queue Task] Error: An error occurred with the following error message: "The ServicedComponent being invoked is not correctly configured (Use regsvcs to re-register).".
There is no more diagnostic data that I can see in the Execution Results. Can anyone please explain to me how I can get this working?
Thanks!
Bryan
View 12 Replies
View Related
May 17, 2008
Hi,
construir
build
© Webster's
I am programing a site in aspnet 2005
I contructed space from my host for my Database.
In the web.config I added a connection string with username and password <configuration>
<appSettings/><connectionStrings><add name="oseriConnectionString" connectionString="Data Source=sql2005.digiweb.com.br;
Initial Catalog=zzz;
User Id=xxx;Password=yyy"
providerName="System.Data.SqlClient"/>
and I have access to this database when I work on my station as well when I am working on line.
Unfortunately I also gained for free the ASPNETDB.mdf file...
The ASPNETDB is automaticaly created in the ~/app_data together with a web.config.
I use the following connectionstring:<add name="aspNetDBConnectionString" connectionString="Data Source=sql2005.digiweb.com.br;
initial Cataloge=htdocsapp_DataASPNETDB.MDF;
Integrated Security=True"/>
Working on my station I have access to the aspnetDB file, I can add users roles etc..
notice that I use ConnectionString to my provider!
My first question is whether I really load the information also to the file in my site Because on my station I can find the changes.
If the answer is no then do I load the file simply through the FTP ?
and how can I open the file in the provider side?
In any case when I run the site on line, trying to log in, I get an error message 26
Exception Details: System.Data.SqlClient.SqlException: An error has occurred while establishing a connection to the server. When connecting to SQL Server 2005, this failure may be caused by the fact that under the default settings SQL Server does not allow remote connections. (provider: SQL Network Interfaces, error: 26 - Error Locating Server/Instance Specified)
If I insert a wrong password I get the same error message. Which means that I don’t have access to the file.
I definitely could use some help since from my provider I get none.
Thank you
Dov Kruman
View 4 Replies
View Related
May 26, 2004
When trying to connect to my sql server I get the following error :
Connection Failed :
SQLState:'08001'
SQL Server Error : 17
[DBNETLIB][ConnectionOpen(Connect))(.[SQL Server Does not exist or access denied]
im not sure how to give a user access or give the user the right password
I get the same error when trying to create a database and connect to the server.
Im working on xp pro, and using VS.net. also theres a red x next to the cylinder of the sql server, so im assuming im doing something wrong.
View 3 Replies
View Related
Jun 14, 2005
Hello,I was wondering if there were any built-in objects to handle error handling, in any of the SQL Server objects, or just to use event log or trace or debug or something like that. Or is it not recommended at all to use try.. catch, for whatever reason.Thanks a lot.
View 4 Replies
View Related
May 16, 2006
I am getting the following error.
“The user instance login flag is not supported on this version of SQL Server. The connection will be closed.�
Background i created a site on my development machine, and every thing worked, this computer is running sql EX. I uploaded the site to the production server (running sql 2005 standard) and changed the connection string (i have used this connection string with other dB’s to display data only, and it works) but i tried it with the ASPNETDB.mdf in the AppData folder and i get the above message.
Do i have to set some special permissions in the db for it to work. I need to be able to insert, update, and delete in this app.
View 3 Replies
View Related
Jun 29, 1998
I presently have Error Logging turned on for the SQL Executive, but I no longer want it. When I
open up the "Configure SQL Executive" window under the Server menu, the
"Error Log File" field is dimmed and there is no option to turn it off.
How do I turn off logging for SQL Executive?
View 1 Replies
View Related
Jun 6, 2008
Just like in DTS where we can add error file so that if the DTS package fails we can see what caused the DTS to fail, likewise do we have anything like error logging file in SSIS. I greatly appreciate your help on this. thanks!!
View 1 Replies
View Related
Mar 16, 2007
I have merge replication setup to a bunch of mobile subscribers. I want everything managed from the server and I want everything to run continuously. The reason we want this is that we want subscribers to automatically synchronize data within 60 seconds of plugging into the network from any location. We do not want to write anything to have to detect connectivity and initiate it. We do not want it initiated from a subscriber either. This creates a SEVERE logging issue and has halted a roll out at 2 different customers. We can't get beyond about 60 subscribers on a system that was running 3700 subscribers in SQL Server 2000. The server quite literally freezes and becomes non-responsive 1 - 2 times per day. We've tracked this back to the volume of logging into the Windows event log that is being caused by the replication engine.
When subscribers are disconnected, they throw constant errors, to the tune of 1 error every 2 minutes into the SQL Server error log as well as the Windows event log. This is because someone decided that these should be level 18 errors. There is no error. The publisher could not contact the subscriber, so I want it to simply log an error, shut up, go back to sleep, and then try again. I do NOT want a message in my SQL Server error log and I do NOT want a message in my Windows event log.
We are currently logging over 60,000 messages per day into both the Windows event log and the SQL Server error logs for something that we KNOW is a NORMAL operational state of the system. The merge agent doesn't have a parameter that I can feed it to ignore 14151 errors.
The culprit is in sys.sp_MSrepl_raiseerror. Since it is a system object, I can't override it and change the severity level of the error. So, right now we are stuck and the SQL Server error log as well as Windows event logs are being rendered quite useless on the system.
The offending code is:
raiserror (14151, 18, -1, @agent, @agent_name, @message)
Does anyone have any idea how I can forcefully change sys.sp_MSrepl_raiseerror or in some other way suppress the logging of 14151 errors from the Windows and SQL Server logs?
View 1 Replies
View Related
Jul 26, 2006
Hi:
How can I copy the error messages when I execute a SSIS package?. The Progress tab or the Execution results tab both dont have the means to copy the results. I would like the errors to be output to a text file under a directory on my drive system (some thing like C:SSISExecResults.txt). Is this possible?. If so how do I configure my package to output the package execution results to a text file?.
Any help/suggestions/comments highly appreciated.
Thanks
AK
View 1 Replies
View Related
Jan 25, 2007
Hi All,
When the embedded DTS package fails at runtime, and logging has been enabled for the package (and all log events selected for reporting on for the package and the task), the DTS error (i.e. any meaningful errors) are not thrown up to/caught by the SSIS/outer level. All you get is something like:
COMException - error returned from a call to a COM component.
Does anyone have any comments &/or know to get errors thrown from within an embedded DTS package, thrown up to the wrapping SSIS package?
Cheers,
Tamim.
View 1 Replies
View Related
Sep 15, 2007
I just installed SQL Server 2005 with SP2 on Vista. When I try to login from SQL Server Management Studio, I get the following error message in the log:
---
2007-09-15 18:58:02.23 Logon Error: 18456, Severity: 14, State: 11.
2007-09-15 18:58:02.23 Logon Login failed for user '<computer name><user account>'.[CLIENT: <local machine>]
---
Since I can't login, I can't try some of the stuff I have seen here, such as creating new logins etc.
I installed Analysis Server and Integration Services at the same time. Logging in to them both works fine.
I use windows authentication. I don't know if changing that helps, as I don't know how to change it without logging in in the first place...
View 4 Replies
View Related
Mar 15, 2007
I have used skiperrors parameter for 2601,2627 and 20598 errors in my Transaction replication setup. When transactions with above error are encountered, its skipped but I€™m not getting sql command that is skipped in MSrepl_errors table. Since SQL server 2000 is not saving transaction sequence number in the MSrepl_errors we are not getting the command, which have the errors.
Is there any way to track the commands those are skipped in transactional replication.
View 11 Replies
View Related
Mar 5, 2007
I have an Analysis Services Processing Task in my SSIS package. I run the SSIS package using SQL Server job, the running of the package is a job step.
When I process manually the analysis services objects (in practise cubes) using dtexec utility I get a lot of log. In case the processing fails I get error messages that quite well describe the error. But when I run the job the only information I get in the job log is that the job step failed. I know the failure happens in the Analysis Services Processing Task.
Is there any way in SSIS to get a) the log of the Analysis Services processing or b) the error messages of the Analysis Services processing? Or should the processing be done some other way than I've been doing?
View 4 Replies
View Related
Sep 12, 2005
I recently read the project real ETL design best practices whitepaper. I too, want to do custom logging as I do today, and also use SSIS logging. The paper recommended using the variable system::PackageExecutionId to tie the 2 logging methods together.
View 4 Replies
View Related
Aug 31, 2007
Hey Everyone,
I have a Data-Flow task embedded in a Sequence Container (does not fail component on error) on the Control Flow panel of the SSIS designer. This data flow task contains a connection to a Flat File Source -> A Data Transformation -> Into an OLE Db Destination.
The problem is that the Flat File isn't always delimited properly -> the client cannot be relied on to do this.
My question is when the delimiters are messed up, how can I capture the offending error row(s) from the Flat File Source?
What I've tried:
1) Set every column in the source flat file on error to: Redirect Row
2) Added a Script Transformation to pull the description and the record id out of the offending row
3) Added an Error file flat file destination to the end of the flow.
The package always fails on the Flat File Source and never Redirects the offending Row to the error output - I never see my onError Script Transformation go Green, Red, or Yellow - SSIS doesn't let it get there.
I'm really new to SSIS so sorry if this is a super basic question.
Here is the Error Text:
[Source - InventTable_csv [1]] Error: The column delimiter for column "RECID" was not found.
[Source - InventTable_csv [1]] Error: An error occurred while processing file "C:------InventTable.csv" on data row 15228.
[DTS.Pipeline] Error: The PrimeOutput method on component "Source - InventTable_csv" (1) returned error code 0xC0202092. The component returned a failure code when the pipeline engine called PrimeOutput(). The meaning of the failure code is defined by the component, but the error is fatal and the pipeline stopped executing.
[DTS.Pipeline] Error: Thread "SourceThread0" has exited with error code 0xC0047038.
I do have the MaxErrorCount set to 1 on the Data Flow Task but still think I should see my script task execute and a log entry be generated.
Any Ideas?
Matt
View 15 Replies
View Related
Jun 20, 2007
Hello experts. I have been searching for anything about this but found very little. What are the events logged in SQL Server Error Logs aside from Successful/Failed Login, Backup/Restore/Recover database and, start/init sql server? Can we configure this to log other events, like CREATE or DBCC events for example? If so, how? Thanks a lot.
View 1 Replies
View Related
Mar 30, 2004
and (jobs.ApplicationsClosed > getdate() OR jobs.ApplicationsClosed = getdate())
The above statement does not pick jobs.ApplicationsClosed= 3/30/2004(that is today'sdate)
If I change 3/30/2004 to 3/31/2004 it picks it up. What is wrong with my syntax?
Thanks!
View 2 Replies
View Related
Dec 9, 2007
Hi guys,
I'm trying to use the bcp utility to transfer data from an SQL Server table (CUSTOMERS) to a text file (test.txt).
Here is what I have:
DECLARE @FileName varchar(50)
SET @FileName = 'C: est.txt'
EXEC bcp BAirwaysDB..CUSTOMERS out @FileName -S<servername> -T
only I keep getting the error:
Msg 102, Level 15, State 1, Line 4
Incorrect syntax near '.'.
and when running:
bcp BAirwaysDB..CUSTOMERS out C: est.txt -S<servername> -T
on the command line I get:
SQLState = 28000, NativeError = 18456
Error = [Microsoft][SQL Native Client][SQL Server]Login failed for user 'RIVERAMelanie'.
SQLState = 42000, NativeError = 4060
Error = [Microsoft][SQL Native Client][SQL Server]Cannot open database "BAirways" requested by the login. The login failed.
Can you see where I'm going wrong with this? Any feedback would be really appreciated.
Thank you
Butterfly82
View 7 Replies
View Related
Oct 12, 2007
Hi,
I have the following simple SP..
There is a field which I'm doing a sUM() on to get a total for a QtyRecieved from one of the tbls in the SP..
However, the QtyRecieved field is set to be a two decimal place numeric field.
The sp works fine without issues until on the of the qty received is not a round number.
If it's a number with a decimal in it (i.e 5.5) then this is show as a seperate result and not SUM'd with the others.
Any ideas why?
SELECT PDS_Login.Supplier_Products.ProductName, PDS_Login.Supplier_Products.ProductCode, dbo.Suppliers_POs_Details.POID,
dbo.Suppliers_POs_Details.PODetailsID, dbo.Suppliers_POs_Details.Qty, dbo.Suppliers_POs_Details.PricePerItem,
dbo.Suppliers_POs_Details.PoDetailsStatus, dbo.Suppliers_POs_Details.PoDateExpected, dbo.Suppliers_POs_Details.PODateReceived,
PDS_Login.Supplier_Products.UOM, PDS_Login.Supplier_Products.Vatable, dbo.Suppliers_POs_Details.ProductID,
dbo.Suppliers_POs_Details.PODetailsStatusReason, SUM(dbo.Suppliers_POs_Details_Received.Qty) AS QtyReceived
FROM PDS_Login.Supplier_Products INNER JOIN
dbo.Suppliers_POs_Details ON PDS_Login.Supplier_Products.ProductID = dbo.Suppliers_POs_Details.ProductID RIGHT OUTER JOIN
dbo.Suppliers_POs_Details_Received ON dbo.Suppliers_POs_Details.PODetailsID = dbo.Suppliers_POs_Details_Received.PODetailsID
GROUP BY dbo.Suppliers_POs_Details.PODetailsID, dbo.Suppliers_POs_Details.Qty, PDS_Login.Supplier_Products.ProductName,
PDS_Login.Supplier_Products.ProductCode, dbo.Suppliers_POs_Details.POID, dbo.Suppliers_POs_Details.PricePerItem,
dbo.Suppliers_POs_Details.PoDetailsStatus, dbo.Suppliers_POs_Details.PoDateExpected, dbo.Suppliers_POs_Details.PODateReceived,
PDS_Login.Supplier_Products.UOM, PDS_Login.Supplier_Products.Vatable, dbo.Suppliers_POs_Details.ProductID,
dbo.Suppliers_POs_Details.PODetailsStatusReason, dbo.Suppliers_POs_Details_Received.Qty
HAVING (dbo.Suppliers_POs_Details.POID = @POID)
View 10 Replies
View Related
Aug 31, 2006
This is a subset question of one of my other threads, the gist is while using forms authentication, I am trying to enter additional information into another table on the same db as the aspnet_membership tables. I think I need an <asp:SqlDataSource> to do this because it is about the only thing left I haven't tried to get this code to work so any help is appreciated. Environment: sql server 2000, windows server 2003, asp.net 2.0, vb, no GUI<ASP:SqlDataSource id="addedInfo" ConnectionString="<%$ ConnectionStrings:SqlServerConnection %>" InsertCommand="INSERT INTO addInfo(username,email,company,firstname,lastname,phone) VALUES (@username,@email,@company,@firstname,@lastname,@phone)" runat="server" />looking over some of my books and online it says in the connectionStrings that it is supposed to be the database name that goes next to the : but when I try that I get an error that it is looking for the name of the connection string, so I enter the name of the connection string (as above) and nothing happens, which is basically the ongoing event with this whole problem, the form fields (username, email, password) that go into the aspnet_membership tables just fine, I don't have any problems with those, it is getting the additional information into another table that has been stalling me the whole time.So does this sqldatasource look right? Any help is appreciated.
View 12 Replies
View Related
May 16, 2008
Hi everyone,
I'm having some problems importing a CSV to a db in SQL Server
Consider the following csv input
"1102","Spiderman, New York City",
"1103","Superman, Metropolis",
"1104","Batman, Gotham City",
When I select comma as delimiter, the columns will automatically
be offset since the location includes commas as well. How do I correctly
set the delimiter?
I tried using the following as delimiter → ","
but that'll strip the quotes which are required in this case.
Does anyone have an idea how to resolve this?
View 8 Replies
View Related
May 22, 2005
Call me an idiot as I'm quite new to asp.net. I'm working through a
book called 'ASP.NET Unleashed' where the chapter on how to create a
database connection to an sql database on MSDE called 'pubs' is
shown. Iv'e installed MSDE. When I try to run the example it says that
the login or authentication has failed. Iv'e tried different things but
I'm out of ideas. Another thing is that when I try to install sql
server 2000 on my Win XP it first says something about this being the
wrong OS or something like that. I can get past that but when I'm
presented with 3 installation options 1.client 2. client and
connectivity 3.connectivity I installed client because that's supposed
to create a stand alone installation.
However when I'm done installing the only new entry in the start->programs is
client connectivity. Where is the Enterprise services that I'm supposed
to be able to access according to the book? Is sql server 2000
compatible with XP and not just win 2000?
View 2 Replies
View Related
