I must have hit some setting to turn off the debug output, but I can't find how to get it back on. The debug output window displays when I execute a package, I just don't get the execution output I had been getting. Sorry to bother you with such trivia, but any help you can provide is appreciated. Thanks.
View 4 Replieswhen I debug my appliction with .netcf , the output panel display a lot of exception
as shown the following, But it still does work , just very slow. What's matter?
'MobileCard.exe' (Managed): Loaded 'C:Program FilesMicrosoft Visual Studio 8SmartDevicesSDKCompactFramework2.0v2.0DebuggerBCLmscorlib.dll', No symbols loaded.
'MobileCard.exe' (Managed): Loaded 'c:documents and settingspan桌�mobilecardmobilecardin
eleaseMobileCard.exe', Symbols loaded.
'MobileCard.exe' (Managed): Loaded 'C:Program FilesMicrosoft Visual Studio 8SmartDevicesSDKCompactFramework2.0v2.0DebuggerBCLSystem.Windows.Forms.dll', No symbols loaded.
'MobileCard.exe' (Managed): Loaded 'C:Program FilesMicrosoft Visual Studio 8SmartDevicesSDKCompactFramework2.0v2.0DebuggerBCLSystem.dll', No symbols loaded.
'MobileCard.exe' (Managed): Loaded 'C:Program FilesMicrosoft Visual Studio 8SmartDevicesSDKCompactFramework2.0v2.0DebuggerBCLSystem.Drawing.dll', No symbols loaded.
'MobileCard.exe' (Managed): Loaded 'C:Program FilesMicrosoft Visual Studio 8SmartDevicesSDKCompactFramework2.0v2.0DebuggerBCLSystem.Data.dll', No symbols loaded.
'MobileCard.exe' (Managed): Loaded 'C:Program FilesMicrosoft Visual Studio 8SmartDevicesSDKCompactFramework2.0v2.0DebuggerBCLSystem.Xml.dll', No symbols loaded.
'MobileCard.exe' (Managed): Loaded 'c:documents and settingspan桌�mobilecardmobilecardin
eleaseOpenNETCF.Windows.Forms.dll', No symbols loaded.
'MobileCard.exe' (Managed): Loaded 'c:documents and settingspan桌�mobilecardmobilecardin
eleaseOpenNETCF.Drawing.dll', No symbols loaded.
'MobileCard.exe' (Managed): Loaded 'C:Program FilesMicrosoft Visual Studio 8SmartDevicesSDKCompactFramework2.0v2.0DebuggerBCLMicrosoft.WindowsCE.Forms.dll', No symbols loaded.
'MobileCard.exe' (Managed): Loaded 'c:program filesmicrosoft visual studio 8smartdevicessdksql servermobilev3.0System.Data.SqlServerCe.dll', No symbols loaded.
A first chance exception of type 'System.IO.FileNotFoundException' occurred in mscorlib.dll
A first chance exception of type 'System.IO.FileNotFoundException' occurred in mscorlib.dll
A first chance exception of type 'System.UnauthorizedAccessException' occurred in mscorlib.dll
A first chance exception of type 'System.UnauthorizedAccessException' occurred in mscorlib.dll
'MobileCard.exe' (Managed): Loaded 'System.SR.dll', No symbols loaded.
A first chance exception of type 'System.IO.FileNotFoundException' occurred in mscorlib.dll
'MobileCard.exe' (Managed): Loaded 'System.SR.resources.dll', No symbols loaded.
A first chance exception of type 'System.IO.FileNotFoundException' occurred in mscorlib.dll
A first chance exception of type 'System.IO.FileNotFoundException' occurred in mscorlib.dll
A first chance exception of type 'System.UnauthorizedAccessException' occurred in mscorlib.dll
A first chance exception of type 'System.UnauthorizedAccessException' occurred in mscorlib.dll
A first chance exception of type 'System.UnauthorizedAccessException' occurred in mscorlib.dll
A first chance exception of type 'System.UnauthorizedAccessException' occurred in mscorlib.dll
A first chance exception of type 'System.UnauthorizedAccessException' occurred in mscorlib.dll
A first chance exception of type 'System.UnauthorizedAccessException' occurred in mscorlib.dll
A first chance exception of type 'System.UnauthorizedAccessException' occurred
Thank you.
Hi
Can anyone out there help me to solve the displaying floating point?
The problem is i couldn't get the result as 3.33333. The result i am getting is 3.00.
My coding is as below:
declare @a decimal(7,5)
select @a = 10/3
select @a
Result : a = 3.00
Thanks in advance
Rgds
Ave
Hello
When running a package in VS you can see something like this in the output window:
SSIS package "logging.dtsx" starting.
Information: 0x40043006 at Data Flow Task, DTS.Pipeline: Prepare for Execute phase is beginning.
Information: 0x40043007 at Data Flow Task, DTS.Pipeline: Pre-Execute phase is beginning.
Information: 0x402090DC at Data Flow Task, Flat File Source [1]: The processing of file "C: est ssis loggingad_data1.txt" has started.
Information: 0x4004300C at Data Flow Task, DTS.Pipeline: Execute phase is beginning.
Warning: 0x8020200F at Data Flow Task, Flat File Source [1]: There is a partial row at the end of the file.
Information: 0x402090DE at Data Flow Task, Flat File Source [1]: The total number of data rows processed for file "C: est ssis loggingad_data1.txt" is 477.
Information: 0x402090DF at Data Flow Task, OLE DB Destination [1011]: The final commit for the data insertion has started.
Information: 0x402090E0 at Data Flow Task, OLE DB Destination [1011]: The final commit for the data insertion has ended.
Information: 0x40043008 at Data Flow Task, DTS.Pipeline: Post Execute phase is beginning.
Information: 0x402090DD at Data Flow Task, Flat File Source [1]: The processing of file "C: est ssis loggingad_data1.txt" has ended.
Information: 0x40043009 at Data Flow Task, DTS.Pipeline: Cleanup phase is beginning.
Information: 0x4004300B at Data Flow Task, DTS.Pipeline: "component "DataReaderDest" (87)" wrote 0 rows.
Information: 0x4004300B at Data Flow Task, DTS.Pipeline: "component "OLE DB Destination" (1011)" wrote 1 rows.
SSIS package "logging.dtsx" finished: Success.
This is exactly when I need when a package is running but I want to be able to see it without using Visual Studio.
I would do it in Reporting Services but I need to find out to get the information. The SSIS logging feature in a package does not provide that kind of info.
Did someone try this already?
Thanks!
Mop
I have Query output like below
C1 P1 B1 A1
C1 P1 B1 A2
C1 P1 B1 A3
C1 P2 B1 A1
C1 P2 B1 A2
C1 P2 B1 A3
C1 P3 B1 A1
C1 P3 B1 A2
C1 P3 B1 A3
C1 P4 B1 A1
C1 P4 B1 A2
C1 P4 B1 A3
i need to show my report output like this.
C1 P1 B1 A1
P2 A2
P3 A3
P4
can any one help me. i used table control but i could able to get my kind of output.
Please add sample code if possible.
Hi we have a table with about 400000 records in it. It starting to take longer and longer to add a new record. I was thinking of creating another identical table and archiving off most of the records every month (we are now adding about about 4000 records a day) . Is this the best thing to do?
I don't know a lot about sql server so any help or suggestions would be great
The following code is taking longer and longer to run. I am not talking about the gradualy increase in size. this job has been taking 30-40 mins normaly and in the last few days it has gone 1hr to 2 hr to 3 hr... ANy ideas why this is happening? I can not see and other jobs running at this time.
declare @filename varchar(255)
set @filename =
(select top 1 physical_device_name
from ****.msdb.dbo.backupset bs, ****.msdb.dbo.backupmediafamily bf
where bs.media_set_id=bf.media_set_id
and database_name = 'Live_PRD'
and backup_start_date>getdate()-1
and type = 'D'
order by backup_start_date desc)
restore database REPORTS_REP
from disk=@filename
with
move 'LIVE_PRD_Data' to 'T:SOUTHREPORTS_REP_Data.mdf',
move 'LIVE_PRD_Log' to 'U:SOUTHREPORTS_REP_Log.ldf',
move 'LIVE_PRD_Log2' to 'U:SOUTHREPORTS_REP_Log2.ldf',
replace, stats=2, recovery
Why does it take longer and longer for the same code to run very simply I have 8,0000,000 records I want to delete from a table . I have tried a few options
Option 1 a while loop which deletes 10,000 rows per loop starting from the earliest until it hits the cut of number I have set. THIS TOOK 5 HOURS
Option 2 created an SP which found the oldest 100,000 records then deleted them. If I run this SP manually it takes 30 €“ 60 secs. Which I thought was much better than above. So I put this SP in a while loop to run 80 odd times thinking the time it would take would be 80 mins a huge improvement.
But every time this SP is called it takes longer and longer (36,30,32,39,37,37,123,163,155,182€¦and so on(In seconds)).
All the sp is doing is as follows(8860000 is just to insure I don€™t delete to much). this sp is then called from in a while loop.
set @recnumber = (select top 1 recnumber from
(select top 100000 recnumber from TabletodeleteFROM where recnumber < 8860000
order by recnumber asc ) TabletodeleteFROM
order recnumber desc)
delete TabletodeleteFROM where recnumber < @recnumber
please help why is it taking longer and longer
Hell All,To reproduce one of our cusotmer's probem, I need to make the SQL torun for more than a minutes before it returns the result set. I do nothave large amount of data in the database to simulate the dealy.Is there a way in SQL to cause the delay while returning the resultsetThanks for the help.RegardsRaj
View 7 Replies View RelatedHello, been having issue w/ symantec backup exec 12 for the past few months trying to backup the database files on a x64 windows 2003 sp2 server. After talking to about 6 techs from symantec, I finally come across this error and am told to contact microsoft.
I had created a .udl file to test the connection between the media server and the SQL server. It tested successfully from the media -> sql. Then I created a .udl on the SQL server to test it there, however when I tried to select the OLE DB provider for microsoft SQL server, I got the following error: "Microsoft Data Link Error: Provider is no longer available.Ensure that the provider is installed properly."
If anyone knows how to fix this issue easily that would be great. Thank you in advance.
-David
Any body please give me the details about how to use 'ALLOW_DUP_ROW' in a CREATE CLUSTERED INDEX statement.
I tried executing the below statement but it throws an error "CREATE INDEX option 'ALLOW_DUP_ROW' is no longer supported."(both in SQL Server 2000 and SQL Server 2005)
CREATE CLUSTERED INDEX index121
ON raj(j)
WITH ALLOW_DUP_ROW
raj(j) contains two rows with same value
please hhelp me out
Hi, Is there any way to audit or record in SQL Server 2000 what queries are the ones that consume more resources in the server so I can focus and improve them?
Thanks
Is it possilbe to have the tooltip (mouse-over text) display longer? Seems like it currently displays for only 5 seconds.
View 3 Replies View RelatedI am having a problem running a sql2k report service script on my new sql2005 server. It seems that the methods SessionHeader() and rs.render are no longer suport. can someone help me figure out what I need to do to continue automating my report running?
rss file contents: (the parts that should matter)
-----------------------------------------------------------------------------------------
Report Parameters
Dim branch as string = nothing
Dim skipreport as string = nothing
dim skip as integer = 0
dim allbranchreport as string = nothing
dim allbranch as integer = 0
dim report as CatalogItem
dim repname as string = nothing
dim specificreport as string = nothing
dim filepath as string = nothing
dim errorpath as string = nothing
dim basefilepath as string = nothing
dim baseerrorpath as string = nothing
dim errorlog as integer = 0
Dim parameters() As ParameterValue = nothing
Dim paramcount as integer = 0
' Render arguments
Dim result As Byte() = Nothing
Dim reportPath As String = nothing
'Dim format As String = "PDF"
Dim format as string = "EXCEL"
Dim historyID As String = Nothing
Dim devInfo as string = Nothing
Dim credentials As DataSourceCredentials() = Nothing
Dim showHideToggle As String = Nothing
Dim encoding As String
Dim mimeType As String
Dim warnings As Warning() = Nothing
Dim reportHistoryParameters As ParameterValue() = Nothing
Dim streamIDs As String() = Nothing
Dim sh As New SessionHeader()
rs.SessionHeaderValue = sh
Dim omitdocmap as string = "True"
'**************************************
'**************************************
'Repset run
Dim repset as string = ""
for each repset in repsetlist
specificreports = specificreportsstart
if specificreports = 0 then
select case repset.tolower
case "all"
specificreports = 0
case "brkctr"
specificreports = 1
reportcount = reportset_brkctr.getupperbound(0)
redim specificreportslist(reportcount)
for reportloop = 0 to reportcount
specificreportslist(reportloop) = reportset_brkctr(reportloop)
next
case "cashmgmt"
specificreports = 1
reportcount = reportset_cashmgmt.getupperbound(0)
redim specificreportslist(reportcount)
for reportloop = 0 to reportcount
specificreportslist(reportloop) = reportset_cashmgmt(reportloop)
next
case "com"
specificreports = 1
reportcount = reportset_com.getupperbound(0)
redim specificreportslist(reportcount)
for reportloop = 0 to reportcount
specificreportslist(reportloop) = reportset_com(reportloop)
next
case "com_vw"
specificreports = 1
reportcount = reportset_com_vw.getupperbound(0)
redim specificreportslist(reportcount)
for reportloop = 0 to reportcount
specificreportslist(reportloop) = reportset_com_vw(reportloop)
next
repset = "com"
case "comcons"
specificreports = 1
reportcount = reportset_comcons.getupperbound(0)
redim specificreportslist(reportcount)
for reportloop = 0 to reportcount
specificreportslist(reportloop) = reportset_comcons(reportloop)
next
case "cons"
specificreports = 1
reportcount = reportset_cons.getupperbound(0)
redim specificreportslist(reportcount)
for reportloop = 0 to reportcount
specificreportslist(reportloop) = reportset_cons(reportloop)
next
case "cons_vw"
specificreports = 1
reportcount = reportset_cons_vw.getupperbound(0)
redim specificreportslist(reportcount)
for reportloop = 0 to reportcount
specificreportslist(reportloop) = reportset_cons_vw(reportloop)
next
repset = "cons"
case "dep"
specificreports = 1
reportcount = reportset_dep.getupperbound(0)
redim specificreportslist(reportcount)
for reportloop = 0 to reportcount
specificreportslist(reportloop) = reportset_dep(reportloop)
next
case "staff"
specificreports = 1
reportcount = reportset_staff.getupperbound(0)
redim specificreportslist(reportcount)
for reportloop = 0 to reportcount
specificreportslist(reportloop) = reportset_staff(reportloop)
next
omitdocmapbranch = "False"
case "staff2"
specificreports = 1
reportcount = reportset_staff2.getupperbound(0)
redim specificreportslist(reportcount)
for reportloop = 0 to reportcount
specificreportslist(reportloop) = reportset_staff2(reportloop)
next
omitdocmapbranch = "False"
case else
specificreports = 1
redim specificreportslist(0)
specificreportslist(0) = "Undefined"
end select
if repset.tolower = "staff2" then repset = "staff"
End if
'Base values
basefilepath = basepath & client & "" & repset & ""
baseerrorpath = basepath & client & "" & "error_" & repset & "_"
'Reports List
Dim reports() as CatalogItem
reports = rs.ListChildren(basereportpath, False)
'Execution
if datasourceok = 1 then
for each report in reports
skip = 0
allbranch = allbranchrun
for each skipreport in skipreports
if report.name.tolower = skipreport.tolower then skip = 1
next
if skip = 0 then
if specificreports = 1 then
skip = 1
for each specificreport in specificreportslist
if report.name.tolower = specificreport.tolower then skip = 0
next
end if
end if
if skip = 0 then
for each allbranchreport in allbranchreports
if report.name.tolower = allbranchreport.tolower then allbranch = 1
next
Redim parameters(1)
parameters(0) = New ParameterValue()
parameters(0).name = "branchall"
parameters(1) = New ParameterValue()
parameters(1).Name = "branch"
'5 parameters reports
repname = report.name
if (repname.substring(0,5).tolower = "loans" or repname.substring(0,4).tolower = "locs") then paramcount = 4
if (repname.length >= 13) then
if repname.substring(0,13).tolower = "loans_beacons" then paramcount = 1
end if
if paramcount = 4 then
paramcount = 0
redim preserve parameters(4)
parameters(2) = New ParameterValue()
parameters(2).name = "comconsall"
if repset.tolower = "cons" or repset.tolower = "com" then parameters(2).value = 0 else parameters(2).value = 1
parameters(3) = New ParameterValue()
parameters(3).Name = "comcons"
if repset.tolower = "com" then parameters(3).value = "commercial" else parameters(3).value = "consumer"
parameters(4) = New ParameterValue()
parameters(4).Name = "brokered"
parameters(4).value = 0
if repset.substring(0,3).tolower = "brk" then parameters(4).value = 1
end if
'All Branches Reports
if allbranch = 1 then
parameters(0).value = "1"
parameters(1).value = "admin"
if client = "CSCU" then parameters(1).value = "newwst"
if clienttype = "vw" then parameters(1).value = "1"
errorlog = 0
filepath = basefilepath & report.name & ".xls"
errorpath = baseerrorpath & report.name & ".txt"
reportpath = basereportpath & "/" & report.name
omitdocmap = omitdocmapall
devinfo = "<DeviceInfo><OmitDocumentMap>" & omitdocmap & "</OmitDocumentMap></DeviceInfo>"
Console.WriteLine (repset.toupper & " " & report.name & " All branches")
Try
result = rs.Render(reportPath, format, historyID, devInfo, parameters, _
credentials, showHideToggle, encoding, mimeType, reportHistoryParameters, warnings, streamIDs)
sh.SessionId = rs.SessionHeaderValue.SessionId
Catch e As SoapException
errorlog = 1
Console.WriteLine(e.Detail.OuterXml)
Catch f as Exception
errorlog = 1
Console.writeline(f.message)
End Try
' Create an error log
If errorlog <> 0 then
Try
Dim stream As FileStream = File.Create(errorpath, 1024)
Console.WriteLine("Errorlog created: " & errorpath)
stream.Close()
Catch g As Exception
Console.WriteLine(g.Message)
End Try
End if
' Write the contents of the report to a file.
If errorlog <> 1 then
Try
Dim stream As FileStream = File.Create(filepath, result.Length)
stream.Write(result, 0, result.Length)
Console.WriteLine("Result written to file: " & filepath)
stream.Close()
Catch e As Exception
Console.WriteLine(e.Message)
End Try
end if
'Other Reports
else
parameters(0).value = "0"
for each branch in branches
parameters(1).value = branch
errorlog = 0
if branch <> "h/o" then
filepath = basefilepath & branch & "" & report.name & ".xls"
else
filepath = basefilepath & "ho" & report.name & ".xls"
end if
if branch <> "h/o" then
errorpath = baseerrorpath & branch & "_" & report.name & ".txt"
else
errorpath = baseerrorpath & "ho_" & report.name & ".txt"
end if
reportpath = basereportpath & "/" & report.name
omitdocmap = omitdocmapbranch
devinfo = "<DeviceInfo><OmitDocumentMap>" & omitdocmap & "</OmitDocumentMap></DeviceInfo>"
Console.WriteLine (repset.toupper & " " & report.name & " " & "Branch: " & branch)
Try
result = rs.Render(reportPath, format, historyID, devInfo, parameters, _
credentials, showHideToggle, encoding, mimeType, reportHistoryParameters, warnings, streamIDs)
sh.SessionId = rs.SessionHeaderValue.SessionId
Catch e As SoapException
errorlog = 1
Console.WriteLine(e.Detail.OuterXml)
Catch f as Exception
errorlog = 1
Console.writeline(f.message)
End Try
' Create an error log
If errorlog <> 0 then
Try
Dim stream As FileStream = File.Create(errorpath, 1024)
Console.WriteLine("Errorlog created: " & errorpath)
stream.Close()
Catch g As Exception
Console.WriteLine(g.Message)
End Try
End if
' Write the contents of the report to a file.
If errorlog <> 1 then
Try
Dim stream As FileStream = File.Create(filepath, result.Length)
stream.Write(result, 0, result.Length)
Console.WriteLine("Result written to file: " & filepath)
stream.Close()
Catch e As Exception
Console.WriteLine(e.Message)
End Try
end if
next
end if
end if
next
end if
next
----------------------------------------------------------------------------------------------------
I get this error message from cmd when I try and run my batch:
----------------------------------------------------------------------------------------------------
J:PRA Publisher>rs -i pra_publisher.rss -s http://localhost/reportserver -l 0
The specified script failed to compile with the following errors:
J:PRA Publisher> "C:WINDOWSMicrosoft.NETFrameworkv2.0.50727vbc.exe" /t:exe
/main:MainModule /utf8output /R:"System.dll" /R:"System.Xml.dll" /R:"System.Web
.Services.dll" /R:"C:Program FilesMicrosoft SQL Server90Toolsinn
s.exe" /
out:"C:Documents and SettingsetopLocal SettingsTemp1fw7qn9k.exe" /debug-
"C:Documents and SettingsetopLocal SettingsTemp1fw7qn9k.0.vb" "C:Docu
ments and SettingsetopLocal SettingsTemp1fw7qn9k.1.vb"
Microsoft (R) Visual Basic Compiler version 8.0.50727.42
for Microsoft (R) .NET Framework version 2.0.50727.42
Copyright (c) Microsoft Corporation. All rights reserved.
C:Documents and SettingsetopLocal SettingsTemp1fw7qn9k.1.vb(253) : error
BC30002: Type 'SessionHeader' is not defined.
Dim sh As New SessionHeader()
~~~~~~~~~~~~~
C:Documents and SettingsetopLocal SettingsTemp1fw7qn9k.1.vb(254) : error
BC30456: 'SessionHeaderValue' is not a member of 'Microsoft.SqlServer.Reporting
Services2005.ReportingService2005'.
rs.SessionHeaderValue = sh
~~~~~~~~~~~~~~~~~~~~~
C:Documents and SettingsetopLocal SettingsTemp1fw7qn9k.1.vb(434) : error
BC30456: 'Render' is not a member of 'Microsoft.SqlServer.ReportingServices2005
.ReportingService2005'.
result = rs.Render(reportPath, format, historyID, de
vInfo, parameters, _
~~~~~~~~~
C:Documents and SettingsetopLocal SettingsTemp1fw7qn9k.1.vb(436) : error
BC30456: 'SessionHeaderValue' is not a member of 'Microsoft.SqlServer.Reporting
Services2005.ReportingService2005'.
sh.SessionId = rs.SessionHeaderValue.SessionId
~~~~~~~~~~~~~~~~~~~~~
C:Documents and SettingsetopLocal SettingsTemp1fw7qn9k.1.vb(496) : error
BC30456: 'Render' is not a member of 'Microsoft.SqlServer.ReportingServices2005
.ReportingService2005'.
result = rs.Render(reportPath, format, historyID
, devInfo, parameters, _
~~~~~~~~~
C:Documents and SettingsetopLocal SettingsTemp1fw7qn9k.1.vb(498) : error
BC30456: 'SessionHeaderValue' is not a member of 'Microsoft.SqlServer.Reporting
Services2005.ReportingService2005'.
sh.SessionId = rs.SessionHeaderValue.SessionId
~~~~~~~~~~~~~~~~~~~~~
--------------------------------------------------------------------------------------------------------------------
Any advice on how to fix this would be graetly appreciated. Thanks!
I could use a little help here. We have a stored procedure that runs on SQL2000 and for a large dataset only takes 1-2 minutes. On SQL2005 however, it takes around 25 minutes. Any advice or insight anyone could give would be great.
Here's the stored procedure:
CREATE PROCEDURE daa_upd_relationship_balance_hist
AS
begin tran
insert fldarts..daa_relationship_bal_hist
select <-- list snipped -->
from daa_relationship_bal drb, daa_user_review dur
where
drb.acct_no = dur.acct_no and
drb.control_2 = dur.control_2 and
drb.nb_gl_cost_ctr = dur.nb_gl_cost_ctr and
drb.nb_dda_sav_type = dur.nb_dda_sav_type and
drb.acct_no+drb.control_2+drb.nb_gl_cost_ctr+drb.nb_dda_sav_type+convert(char(10),dur.activity_date, 101)
not in
(select acct_no+control_2+nb_gl_cost_ctr+nb_dda_sav_type+convert(char(10), activity_date, 101)
from fldarts..daa_relationship_bal_hist)
if @@error = 0
commit tran
else
begin
rollback tran
print '!!!Error (daa_relationship_bal_hist) : Relationship Balance History not updated'
end
return
GO
So we have three tables. Here's a schema for each and the indexes on them. I've omitted columns from the tables that are not utilized in this query.
daa_relationship_bal:
CREATE TABLE [daa_relationship_bal] (
[control_2] [char] (3) NOT NULL ,
[nb_gl_cost_ctr] [char] (7) NOT NULL ,
[acct_no] [char] (14) NOT NULL ,
[nb_dda_sav_type] [char] (3) NOT NULL
)
index:
idx_upd_balance_hist nonclustered located on PRIMARY acct_no, control_2, nb_gl_cost_ctr, nb_dda_sav_type
daa_user_review:
CREATE TABLE [daa_user_review] (
[control_2] [char] (3) NOT NULL ,
[nb_gl_cost_ctr] [char] (7) NOT NULL ,
[acct_no] [char] (14) NOT NULL ,
[nb_dda_sav_type] [char] (1) NOT NULL ,
[activity_date] [datetime] NULL
)
index:
PK_daa_user_review_1__37 nonclustered, unique, primary key located on INDEXES control_2, nb_gl_cost_ctr, acct_no, nb_dda_sav_type
daa_relationship_bal_hist:
CREATE TABLE [daa_relationship_bal_hist] (
[control_2] [char] (3) NOT NULL ,
[nb_gl_cost_ctr] [char] (7) NOT NULL ,
[acct_no] [char] (14) NOT NULL ,
[nb_dda_sav_type] [char] (3) NOT NULL ,
[activity_date] [datetime] NOT NULL
)
index:
PK_daa_rel_bal_hist_1__37 nonclustered, unique, primary key located on PRIMARY control_2, nb_gl_cost_ctr, acct_no, nb_dda_sav_type, activity_date
Any help on this would be great. If more information is needed, please let me know.
Hi,
we are running a Windows Application(.Net 2.0) against a MS SQL Server 2000 on WinXP. The application is able to succesefully connect to Database and execute "smaller stored procedure". The application also must execute a stored proc that returns 2M rows for export into a flat file.
When executing the stored proc from a remote box with 512M or less RAM(slow box), the application receives the error:
A transport-level error has occurred when receiving results from the server. (provider: TCP Provider, error: 0 - The specified network name is no longer available.)
If a box has 1G or RAM or more, application seems running fine.
Now, I have the application running on a slow box, watching memory usage, and it seems fine - the memory acquired by the application never exceded 39M of RAM, so I'm still not clear why connection is being closed.
Also, there seem to be no mesages from MS SQL server in Event Log.
The problem is that I have to make the app run on a "slow box".
Any ideas or comments are appreciated (somebody, please, help me ;-) )
We moved a 2000 database to another platform by restoring the database. It took a lot longer than I expected. Would it take less time to restore it a second time to the same target database since the allocations are already there?
Thanks
Is there a way to have a memo field in a table that is larger than 255 characters? I like to have a memo field of of about 1000 characters of text.
Thanks,
Jim
I have a field which was varchar before but I changed it to text.
But i can't write in it enough text as i wish. This field is important becouse it holds SQL senences which i parse latter in my application and than i execute it.
it says <Long Text> and i can't enter any more characters.
Getting "The specified network name is no longer available" during SQL Backups dumping to Network share.
- problem started occurring on July 3, 2015
- our Ola Hallengren backup solution deployed to over 150 SQL Servers.. was running fine for almost 2 years
- Occurring in multiple SQL Server environments: W/Server 2012 Ent, W/Server 2008 Ent, SQL 2012 Ent, SQL 2008 R2 Ent
- We're utilizing latest Ola Hallengren backup solution (Jan 2015 release)
- Dumping to network share (jobs running under SQL Agent account w/ local admin & sysadmin on server and full rights to Network Share
Currently I have a server that has two instances of SQL Server that areboth heavily used. We are moving the databases that are on the defaultinstance of this server to a new server. Since the old server willonly need one instance (the current named instance) of SQL Server isthere a good way to remove the default instance and make the namedinstance the default? If this change is possible will the name of thecurrent named instance need to be changed? Will all of the programscurrently accessing the named instance need to change their connectionstring?
View 2 Replies View RelatedHi folks,A DTS package we have run for years now no longer works. The specificpart that is not working is a subquery in the SOURCE object of atransformation. The source is based on a Microsoft Data Link to aSybase database (DSN changed a couple months ago but the connectionstring was updated successfully for the new 12.51 version of ASE) andthe destination is a link to a local SQL Server 2000 database.The transformation has always worked and when I remove the subqueryeverything works OK. The problem is that I need the subquery!Does anyone have a clue what is going on?Here is the full query.select TableKey = RVSN_TYPE_ID,TableCode = RVSN_TYPE,RevisionDate = RVSN_DATE,RevisionReasonCode = RSN_CODE,RevisionGroup = RVSN_GRP_ID,RevisedField = (select L.FieldIDfrom tempdb.guest.lkpRevisedField Lwhere L.TableID = R.RVSN_TYPEand L.FieldName = R.CHNG_FLD),RevisedValue = OLD_FLD_VAL,RevisionTimestamp = RVSN_TIMESTAMPfrom RVSN R,tempdb.guest.MaxTimeStamp TSwhere R.RVSN_TIMESTAMP TS.Rtimestampand R.RVSN_TIMESTAMP is NOT NULLJohn H.
View 1 Replies View RelatedI'm running an ISP database in SQL 6.5 which has a table 'calls'. When thenew month starts I create a new table with the same fields and move the dataof previous month into that table and delete it from calls. So 'calls' holdsthe data of only the current month. for example at the start of november2003 I ran the queriesCreate Table Oct2003Calls {................................}/* Now insert data of october into new table */INSERT Oct2003CallsSELECT *FROM callsWHERE calldate < '11/1/03'/* Finaly delete october data from calls table */DELETE FROM callsWHERE calldate < '11/1/03'The problem is that while the insert query takes about 2 minutes to executethe delete queries takes over 10 minutes to affect the same no. of rows. Whyis that?This causes problems because user authentication stops when this query isrunning which means users cant connect to the internet.
View 4 Replies View RelatedI have a table with some sensitive customer data in it. I am nowkeeping all the data in another table, and encrypting it. I want toget rid of the original unencrypted data and be sure that it is nolonger anywhere on disk. Should I drop the table, or first delete therows and then do a dump tran? I'm not sure how to know if the data isactually physically deleted from disk, or if it's still there, butjust in blocks that get marked as available. Any guidance would begreatly appreciated.Thanks,Bruce
View 1 Replies View RelatedHi, I have 8 charts on a report that no longer show up on the report.
the datasets they are based on still produce data when queried.
All I see is white space plus the textbox titles?
The charts are there in layout view and still correctly reference the right datasets and fields.
Hello All,
I have SQL Server 2005 installed on my machine and I am firing following query to insert 1500 records into a simple table having just on column.
Declare @i int
Set @i=0
While (@i<1500)
Begin
Insert into test2 values (@i)
Set @i=@i+1
End
Here goes the table definition,
CREATE TABLE [dbo].[test2](
[int] NULL
) ON [PRIMARY]
Now the problem with this is that on one of my server this query is taking just 500ms to run while on my production and other test server this query is taking more than 25 seconds.
Same is the problem with updates. I have checked the configurations of both the servers and found them to be the same. Also there are no indexes defined on either of the tables. I was wondering what can be the possible reason for this to happen. If any of u people has any pointers regarding this, will be really useful
Thanks in advance,
Mitesh
Hi.
i got an error when i connect to sqlserver 2005 db with use of Sqlserver ManagementStudio.
A connection was successfully established with the server, but then an error occurred during the login process. (provider: TCP Provider, error: 0 - The specified network name is no longer available.) (.Net SqlClient Data Provider)(Microsoft Sql Error - 64)...
Hi to all,
I have a merge (pull) replication between SQL Server 2005 and SQL Server Express clients.
Data synchronisation is ok, and I already made some schema changes (like adding new columns) at the publisher database which were applied to the subscriber as they should.
Now this doesn't work anymore. New columns added at the publisher (with ALTER TABLE or Management Studio) are no longer replicated to the subscribers.
I don't get any error messages, and I can't find any hints in the logs why this has stopped working.
The "Replicate_Schema_Changes" is still set to TRUE (in general, none of the publication options had been changed).
I tried sp_enumeratependingschemachanges to find out any "bad changes" put the sp returns nothing.
I remember that the last thing I did was adding a default constraint, which was replicated successfully to the subscribers.
Can anybody help?
Michael
I am in the process of migrating DTS 2000 packages via DTS Migration Wizard.
I ran all of the packages through the wizard. Then, I successfully completed changing the remaining issues in two of my packages to SSIS. Everything was fine. The second package I completed is called from a SQL Agent Job. I managed to get the job step converted to use SSIS package. It ran successfully.
Now, I am trying to open other packages to work on them and I get "Microsoft Visual Studio is unable to load this document: Value does not fall within the expected range." and a message window that says "Object reference not set to an instance of an object." This actually happens with the two that I migrated, also. I can no longer access them.
What happened?!?!?!? Does anyone have any experience with this?
While using Aggregate Transformation to group one column,the rows of output sometimes larger than the rows returned by a T-SQL statement via SSMS.
For example,the output of the Aggregate Transformation may be 960216 ,but the
'Select Count(Orderid) From ... Group By ***' T-SQL Statement returns 96018*.
I'm sure the Group By of the Aggregate Transformation is right!
But ,when I set the "keyscale" property of the transformation,the results match!
In my opinion,the "keyscale" property will jsut affects the performance of the transformaiton,but not the result of the transformation.
Thanks for your advice.
Inside some TSQL programmable object (a SP/or a query in Management Studio)I have a parameter containing the name of a StoreProcedure+The required Argument for these SP. (for example it's between the brackets [])
EX1 :Â @SPToCall : [sp_ChooseTypeOfResult 'Water type']
EX2 :Â @SPToCall : [sp_ChooseTypeOfXMLResult 'TABLE type', 'NODE XML']
EX3 :Â @SPToCall : [sp_GetSomeResult]
I can't change thoses SP, (and i don't have a nice output param to cach, as i would need to change the SP Definition)All these SP 'return' a 'select' of 1 record the same datatype ie: NVARCHAR. Unfortunately there is no output param (it would have been so easy otherwise. So I am working on something like this but I 'can't find anything working
DECLARE @myFinalVarFilledWithCachedOutputÂ
NVARCHAR(MAX);
DECLARE @SPToCall NVARCHAR(MAX) = N'sp_ChooseTypeOfXMLResult
''TABLE type'', ''NODE XML'';'
DECLARE @paramsDefintion = N'@CatchedOutput NVARCHAR(MAX) OUTPUT'
[code]...
Hi
I have Lookup task to determine if source data should be updated to or insert to the customer table. After Lookup task, the Error Output pipeline will redirect to insert new data to the table and the Output pipeline will update customer table. But these two tasks will be processing at the same time which causes stall on the process. Never end.....
The job is similiart to what Slow Changing Dimention does but it won't update the table at the same time.
What can I do to avoid such situation?
Thanks in advance,
JD
I am working on an OLAP modeled database.
I have a Lookup Transformation that matches the natural key of a dimension member and returns the dimension key for that member (surrogate key pipeline stuff).
I am using an OLE DB Command as the Error flow of the Lookup Transformation to insert an "Inferred Member" (new row) into a dimension table if the Lookup fails.
The OLE DB Command calls a stored procedure (dbo.InsertNewDimensionMember) that inserts the new member and returns the key of the new member (using scope_identity) as an output.
What is the syntax in the SQL Command line of the OLE DB Command Transformation to set the output of the stored procedure as an Output Column?
I know that I can 1) add a second Lookup with "Enable memory restriction" on (no caching) in the Success data flow after the OLE DB Command, 2) find the newly inserted member, and 3) Union both Lookup results together, but this is a large dimension table (several million rows) and searching for the newly inserted dimension member seems excessive, especially since I have the ID I want returned as output from the stored procedure that inserted it.
Thanks in advance for any assistance you can provide.