Debugging In SQL 2005
May 29, 2008
Ok, I am aware of the process to debug a stored proc for SQL 2005. I have never done anything in the Visual Studios 2005 so have had no reason to have it but now that I am pretty much forced into using SQL 2005, I have been deprived of the easy system of debugging stored procs from query analyzer. My question is...with the Visual Studios 2005 that was included with the SQL 2005 install, why does it not allow me to debug? I am aware of the whole Pro, Standard, etc of VS, but why not offer any way to debug? Am I missing something here? What options do I have to debug a stored proc other than running it over and over and over and over again to pinpoint an issue without getting VS2005 Pro or something?
View 4 Replies
ADVERTISEMENT
Aug 2, 2006
Hello,
we have a SQL server 2005 with Visual studio Prof. 2005 in the
employment.
The debuggers function only in Visual studio correctly, as long as no
code on the SQL server must be implemented.
If a BREAK POINT in a Stored Procedure is set, this is not activated,
since this cannot be bound.
Does someone know, what it lies and can like one it eliminate?
Thank you for your assistance in advance.
Yours sincerely
Big_Ben_31
This entry was translated automatically with the translation
service babel.altavista.com from the German into English.
View 1 Replies
View Related
Jul 9, 2006
Hi,
I have found that when I'm debugging a custom component in BIDS that I've created in another instance of Visual Studio, every time I rebuild the component I have to shutdown and restart BIDS and then reattach to the BIDS process. Which is pretty time consuming... And if I find a small error in my custom component when debugging then I don't seem to be allowed to make any changes to the code unless I stop debugging and go through the process above.
Am I missing something here? Or do I really have to manually go through these steps every time I want to change code in the component I'm debugging?
Can I automate the process with MSBuild or NAnt? If so, is there an example of this anywhere?
Thanks in advance,
Lawrie.
View 1 Replies
View Related
Apr 2, 2007
Hello,
I am having a problem with SQL Server (Express) hanging during simple debugging of CLR code. I created a test project with a user defined function, and call this from the test script. The output log shows that the sqlservr.exe was auto-attached successfully, and then the everything hangs. I have to terminate debugging in order to regain control, and this takes perhaps a minute or two.
Any ideas?
View 11 Replies
View Related
Nov 20, 2007
To the Moderator:
I am not sure if this thread needs to go into this forum or there is one for C# stored procedures/CLR Database Objects.
To All:
Is this a known issue that when debugging CLR stored procedures the VS 2005 freezes even before reaching into the stored procedure? I can restart my computer and debugging works for a while and then it starts to take forever when I step into (F10) during debugging. I am running only one instance of sql server, and even that of my local machine as I have never been able to debug on a remote server.
This random and unstable behavior of the debugger is proving very unproductive and costly. Is there a microsoft update/fix/patch to make debugging CLR stored procedures a smooth process?
Thanks.
View 13 Replies
View Related
Dec 20, 2007
hi friends,
Anyone give give me the steps we have to follow for debussing a stored procedure in sql server 2005...
View 2 Replies
View Related
Feb 29, 2008
Hi ,I am using Visual studio 2005 with sql server 2005. I want to debug my stored procedure, which is situated on the server on the network(accessible through network share). I followed the following URL: http://aspnet.4guysfromrolla.com/articles/051607-1.aspxI have used Direct database debugging : When I right click my stored procedure and click 'step into stored procedure', I get the following error: "Unable to start T-SQL debugging. could not attach
to SQL server process on 'sql_server_name'. The remote procedure call failed and did not
execute" I am using windows authentication to login to sql server Any help?
View 7 Replies
View Related
Feb 5, 2008
I am unable to debug code from a SQL Database Project using the CLR. After VS 2005 does the auto-attaching to the SQL server, VS hangs until I tell it to stop debugging. Many others have reported this as a similar problem, however this only seems to affect me when I€™m connecting to specific servers. Specifically it seems to be remote connections. When I attempt to connect to my SQL 2005 Developer Edition €œlocally€? I get right through and can debug.
From my VS output window:
Auto-attach to process '[1688] [SQL] gx620-eric' on machine 'gx620-eric' succeeded.
Debugging script from project script file.
testing
No rows affected.
(0 row(s) returned)
Finished running sp_executesql.
The thread 'gx620-eric [59]' (0x1730) has exited with code 0 (0x0).
The thread 'gx620-eric [59]' (0x1730) has exited with code 0 (0x0).
The thread 'gx620-eric [59]' (0x1730) has exited with code 0 (0x0).
The thread 'gx620-eric [59]' (0x1730) has exited with code 0 (0x0).
The program '[1688] [SQL] gx620-eric: gx620-eric' has exited with code 0 (0x0).
When I attempt to connect to a remote server running Enterprise Edition, it hangs after a successful attach.
Auto-attach to process '[1856] [SQL] virtual2003eric' on machine 'virtual2003eric' succeeded.
Sometimes after countless attempts, I am able to get this to work, but lately I have had no success. As far as the SQL Server side, enabling and disabling the CLR through the Surface Area Configuration seems to be the only place to do anything relative to the CLR inside SQL server.
I have firewalls disabled. All SQL Servers presently have both SQL 2005 SP2 and Visual Studio 2005 SP1 installed.
I€™ve tried restarting servers and services, checking and un-checking €œAllow SQL/CLR Debugging€? and those steps did not work for me.
Does anyone have any insight on this one? Any ideas on how I can further debug this one?
Thanks.
Eric
View 4 Replies
View Related
Sep 13, 2006
I have a DTS package that I brought over from SQL server 2000 in to SQL Server 2005. I have installed all of the legacy components to run the DTS packages but I need to debug an ActiveX script task. In SQL Server 2000 I could turn on Just-In-Time debugging and use the stop operator (in my vbscript) to break the running script and launch the debugger.
I don't see how to do this in SQL Server 2005 Management Studio. Is it possible to debug a script object in a DTS package running in SQL Server 2005?
Jay Abbott
View 1 Replies
View Related
Jul 22, 2007
Hi,
I have a problem when i want to debug an ssis component under visual studio 2005.
I'm using sql 2005 with service pack 2 and i have already install patch for visual studio under vista.
When i put a breakpoint for exemple in the method "public override void PreExecute()" or in the other method. "public override void ProcessInput(int inputID, PipelineBuffer buffer)" and i execute the pgm.
however when i begin debugging,it's always skip breakpoint
However when i put a break point in the Validate method "public override DTSValidationStatus Validate()" it function.
When execute the the package it works fine.
I use this debug parametres :
Start external program :
C:Program FilesMicrosoft SQL Server90DTSBinnDTExec.exe
Command line arguments
/FILE "D:ProjectsIntegration Services Project1Integration Services Project1TestXmlParserPipe.dtsx" /MAXCONCURRENT " -1 " /CHECKPOINTING OFF /REPORTING EWCDI
I execute visual studio 2005 as Administrator
Please, can some one help me!
View 6 Replies
View Related
Jun 19, 2006
Basically I've been using Visual Studio 2005 for a few weeks now moving a Pocket PC project from 2003 to 2005. When I hit the Start Debugging Button every time until today the project would rebuild and deploy to my pocket PC allowing me to debug etc but now I get
The remote connection to the device has been lost.
Please verify the device conection and restart debugging.
I used to get this problem in VS2003 sometimes and just like the numerous posts on different sites that I've looked at the problem eventually goes away and I'm none the wiser. One guy said that he found that if he went to bed the problem was resolved when he came back!
My PDA running Windows 2003 2nd Edition is directly connected to my PC via a USB port. I've rebooted my PC and done a soft reset on the PDA but it didn't help. I'm using ActiveSync 4.1.
Does anyone know how to resolve this problem?
View 54 Replies
View Related
Dec 28, 2004
Hi.
I need to step into a SP on my SQL server. However, I get "Security hasn't been setup correctly on server RADU. SQL debugging terminated."
I read the docs, and I did exactly this (as per the help files):
---------------------------------------------------------------------------------------------------
To configure DCOM on the server for SQL debugging
You may need to download and install DCOM first. If so, go to http://www.microsoft.com/com/resources/downloads.asp for the latest version.
You must have administrator privileges on the machine where you are configuring DCOM.
From the Start menu, choose Run.
In the Open box, type dcomcnfg.exe.
Click OK.
The Component Services dialog box appears.
In the left pane of the Component Services dialog box, expand the Component Services node and find Computers.
Expand the Computers node and find the computer for which you want to configure DCOM.
Right-click the computer and choose Properties from the shortcut menu.
In the Properties dialog box, select the Default COM Security tab.
Under Access Permissions, click Edit Default.
The Access Permission dialog box appears.
If the group or user who needs access does not appear in the list of permissions, click Add.
The Users, Computers, or Groups dialog box appears.
In the Enter the object names to select box, type the name of the group or user who needs access.
Click OK.
The user is now added to the list.
If SYSTEM does not appear in the list of permissions, click Add.
The Users, Computers, or Groups dialog box appears.
In the Enter the object names to select box, type:
SYSTEM
Click OK.
SYSTEM is now added to the list.
In the Access Permission, select Allow for each user you added.
Click OK to close the Properties dialog box.
If you changed any settings in this procedure, restart SQL Server.
---------------------------------------------------------------------------------------------------
However, from inside VSnet IDE. I get the same message ("Security hasn't been setup correctly blah-blah-blah").
I have tried with users 'ASPNet' and 'VSDevelopers'. Which user should I choose ? Is there something else I should do ?
Sure, this is not the end of the world, I can still do the debug from within Query Analyzer, but still, it would be nice not to have to do this.
Thank you.
Alex
View 1 Replies
View Related
Aug 15, 2005
Hi,Is there a way to debug an SQL Server stored procedure? I call a number of sp's from my .net app and need a way to step through them.Thank you,
View 4 Replies
View Related
Dec 8, 1998
Does anyone use SQL debugging? I write pocedures in SQL server useing Developper studio, but i do not find any means to debug stored procedures.
Though i can place a break point to source code of sp_procedure, code is runned a whole.
Is this means only for C++?
Can anyone help me?
I have very large procedures and someteimes it is hard to find an error.
Ludek
View 1 Replies
View Related
Aug 13, 2007
select
if(acr_application.appStatus = 'AOO' then acr_application.appDt,
if(acr_application.appStatus = 'A01' then acr_application.recvdDt,
if(acr_application.appStatus = 'A02' then
(select A.payDt from acr_payment A, acr_reference_no B
where A.refNo = B.acrReferenceNoId and B.refType = 'ACF' and B.appNo =
acr_application.appNo),
if(acr_application.appStatus = ('A03', 'A08'),
(select C.updatedBy from acr_insp_sched C
where C.appNo = acr_application.appNo and C.seqNo =
(select max (D.seqNo) from acr_insp_sched D where D.appNo = C.appNo)),
if (acr_application.appStatus = ('A04', 'A05', 'A06', 'A15'),
(select E.updatedBy from acr_inspection E
where E.appNo = acr_application.appNo and E.seqNo =
(select max (F.seqNo) from acr_inspection F where F.appNo = E.appNo)),
if(acr_application.appStatus = 'A07',
(select G.payDt from acr_payment G, acr_reference_no H
where G.refNo = H.refId and H.refType = 'REI' and H.appNo =
acr_application.appNo),
if(acr_application.appStatus = ('A10', 'A11'), acr_application.approvedDt,
if(acr_application.appStatus = 'A13', acr_application.updatedBy,
if(acr_application.appStatus = 'A14',
(select H.payDt from acr_payment H, acr_reference_no J
where H.refNo = J.refId and J.refType = 'CSB' and J.appNo = acr_application.appNo), null)))))))))
from acr_application
View 4 Replies
View Related
Aug 21, 2007
In SQLServer 2000 I could easily debug a stored procedure from QA. But I dont know how to debug a sp in SQLServer 2005. I could find nothing to deal with it in SQL Server Management Studio. Can anybody tell me how to do it?
View 6 Replies
View Related
Dec 10, 2007
select
acr_application.appNo as 'applicationNo',
acr_application.facilityName as 'nameOf DrugTesting',
acr_application.adr as 'address',
acr_reference_no.refNo as 'referenceNo',
ref_charge.chargeDesc as 'charges/fee',
acr_reference_no.amount as 'amount',
ref_settings.earlyFileDiscnt as 'pdiscount',
((ref_settings.earlyFileDiscnt / 100) * acr_reference_no.amount) as 'discount',
case when acr_reference_no.earlyFileDiscntDt is not null then acr_reference_no.earlyFileDiscntDt
else
case when '2007-09-29' <= ref_facility.validToDt then date_sub(ref_facility.validToDt, interval (ref_settings.earlyFileDiscntValid + 1) day)
end
end as 'discountValidity',
ref_settings.lateFileDiscnt as 'psurcharge',
((ref_settings.lateFileDiscnt / 100) * acr_reference_no.amount) as 'surcharge',
case when acr_reference_no.lateFileSurchargeDt is not null then acr_reference_no.lateFileSurchargeDt
else
case when '2007-09-29' <= ref_facility.validToDt then ref_facility.validToDt, select a.validTodt from acr_application a where a.appNo = (select max(b.appNo) from acr_application b where b.appNo < acr_application.appNo)
end
end
end as 'surchargeValidity',
'0012 2222 20' as 'accountNumber',
concat('DOH-',acr_reference_no.refNo, '','-85619') as 'accountName',
concat(if(acr_application.ownerTitle is null or acr_application.ownerTitle='','', concat(acr_application.ownerTitle, '')),
acr_application.ownerFname, ' ',
if(acr_application.ownerMname is null or acr_application.ownerMname='','', concat(substr(acr_application.ownerMname,1,1),'.', ' ')),
acr_application.ownerLname, '', '',
if(acr_application.ownerSuffix is null or acr_application.ownerSuffix='','', concat(' ', acr_application.ownerSuffix))) as 'nameOfRepresentative'
case when acr_application.appType = 'INA' then acr_reference_no.amount
else
case when acr_application.appType = 'RNW' then
(if(acr_reference_no.earlyFileDiscnt is not null
and acr_reference_no.earlyFileDiscnt <='2007-09-29',
acr_reference_no.amount + (acr_reference_no.amount * (ref_settings.earlyFileDiscnt / 100))))
else
case when acr_reference_no.earlyFileDiscntDt is not null
and acr_reference.earlyFileDiscntDt > '2007-09-29'
and '2007-09-29' <= ref_facility.validToFt
then acr_reference_no.amount, acr_reference_no.amount + (acr_reference_no.amount * (ref_settings.earlyFileDiscnt / 100))
end
end
end as 'totalCashDeposit',
case when acr_application.appType = 'INA' then date_add(acr_applicationappDt, interval ref_settings.validityAfterAppDayy)
else
case when acr_application.appType = 'RNW' then acr_reference_no.earlyFileDiscntDt
else
case when acr_reference_no.earlyFileDiscntDt is not null and acr_reference_no.earlyFileDiscntDt > '2007-09-29' and '2007-09-29' <= ref_facility.validToDt then ref_facility.validToDt, date_add(ref_facility.validToDt, interval ref_settings.validityAfterAppDay)
end
end
end as 'bankValidity'
from acr_application
left join ref_facility on acr_application.appNo = ref_facility.appNo
left join ref_settings on ref_settings.service = acr_application.service and
ref_settings.ownType = acr_application.ownType and
ref_settings.facilityType = acr_application.facilityType and
ref_settings.institutChar = acr_application.institutChar
left join (acr_reference_no left join ref_charge on acr_reference_no.chargeId = ref_charge.chargeId and acr_reference_no.paid <> 'Y')
on acr_application.appNo = acr_reference_no.appNo
View 4 Replies
View Related
Jul 20, 2005
My colleagues and I have not been able to successfully set up SQL debugging on a SQL 2000 instance running on Windows 2000.Is there a checklist posted somewhere? We have verified that the SQL Server is not running with System Account Credentials. It runs as a Domain Administrator. We have also verified that everyone has permission to run sp_sdidebug. Does it matter that the Win2K machine is a Domain Controller? Any help would be appreciated.
View 1 Replies
View Related
Feb 14, 2008
Hi -
I am new to SSIS but not new to ETL. Is there a way in debugger to debug but not actually update the target table ? In other tools I€™ve used, there was an option setting to not allow update/inserts into the actual table, but would provide a visual dataset so you could see & test with. I haven€™t been able to find this feature in SSIS & was wondering if there is a way to do this.
Thanks -
View 3 Replies
View Related
Jan 11, 2008
Is there a way to step through sql when designing a query the way you can step through VB code in the IDE?
View 3 Replies
View Related
Oct 1, 2007
Hi, I am new here.
I tried to debug stored procedures in the Visual Studio and you know… it was a real shock. Like going in time 10 or 20 years back.
The stored procedures I deal with contain a lot of @tab and #tab, but it appears that I can not evaluate the values of these objects! The only type of object I can evaluate is a variable. But SQL is designed for the table data, right? So the most important type of data is not accessible!
How can I understand, what records have been affected by Update or inserted by Insert? Using prints or debug selects? Is it an era of FORTRAN or ALGOL???
To make it worse, to enter a debugger, I need to provide values of all parameters. It might be simple for the outermost procedure, but for inner stored procs, and where some parameters are some short-living identity values of some records, created in a transaction, it is very difficult to prepare all conditions to make a correct run.
So my question is, may be I had overlooked something? Is it a real debugger or just a joke from Microsoft? Sorry, but I am really angry after wasting a lot of time last week on it.
View 2 Replies
View Related
May 30, 2002
Does anyone know of any good debugging tools for transact sql? I know there is one by compuware called dbpartner but was looking for other options.
Thanks,
Eddie
View 1 Replies
View Related
Nov 5, 2001
I have a script that works in works in Query Analyzer, but when I try to put it in a DTS package, it fails. I have the database set properly in the data source. Can someone give me direction to figure out what is going on?
Brian
View 1 Replies
View Related
Nov 23, 1998
I'm looking for leads on any T-SQL / Trigger / Procedure editing and debugging tools for MSSQL 6.5 .
Any and all information would be appreciated.
Thanks in advance
Paul Gaynor
View 1 Replies
View Related
May 2, 2001
Hello,
I'm kind of new to SQL Server 2000, I've heard about debugging tools in Query Analyser
where can I find this tools?
Thanks
View 2 Replies
View Related
Jan 20, 2006
I was wondering if it is possible to pop up a dialog box from a SQL trigger.
This would be a great way to debug triggers as you could report variable values in the dialog box.
If not, does anybody have any suggestions as to the best way of reporting out variable values whilst a trigger is running?
View 2 Replies
View Related
Aug 1, 2006
From this msg im guessing that SQLE.DLL nee to be installed on my SQLServer box, is that correct? Where would i find this dll?
Server: Msg 508, Level 16, State 1, Procedure sp_sdidebug, Line 1
[Microsoft][ODBC SQL Server Driver][SQL Server]Unable to connect to debugger on APOLLO-ClintonSQL (Error = 0x800401f3). Ensure that client-side components, such as SQLLE.DLL, are installed and registered on PUR-CO-Clinton2. Debugging disabled for connection 59.
View 1 Replies
View Related
Feb 3, 2004
After writing a Stored Procedure(which is giving correct reasult) how can I go for optimizing it?Is there any tool to debug a stored procedure?
View 1 Replies
View Related
Jun 5, 2008
I have been trying to debug a simple CLR function in VS2008 without any luck. I have searched Google and gone through several walk throughs without any luck. The function builds, deploys, and works from SQL fine but I cannot debug in VS. I created a new SQL login for a new user with SysAdmin privileges, and even set the permission level to "unsafe". Still, no debugging. The results in the output window of VS is "Canceled by user". I feel like this may be a permissions issue but I'm not sure. Can someone point me in the right direction to correct this? I use to debug CLR stored procs at another place of employment using VS all the time. Unfortunately, I wasn't involved with configuring it.
View 1 Replies
View Related
Jul 23, 2005
Greetings: I have a question about debugging or stepping through DTSpackage Active X scripts. When I hit a bug Microsoft DevelopmentEnvironment pops up the script and highlights where the error occurred.I can use the Immediate pane to find out the values in the variables,but I can't set breakpoints or step through or out of or back into thescript or even change it. Is this possible? I am having troublefinding references to this. I appreciate any help.Thanks!--Rowan
View 1 Replies
View Related
Dec 9, 2005
I am an old guy that comes from the large IBM 370 generation, at that timewas very easy for me to debug programs using cedf tool., even if theprogram was object code with this tool you were able to intercept CICScommands and sql commands.I have a delphy application., only object code., that has access to a sqlserver.., what tool may I use to intercept the sql commands released fromthis application ?? I know this is not a particular question regarding mssql server, but for sure you guys knows a lot more than me about thisenvironment.RegardsJCortes.
View 1 Replies
View Related
Jan 13, 2006
Hi,
I didn't play around with breakpoints to much, yet. So today I created a package with 2 variables, which both raise their change event. I added a event handler for that just to show the name of the variable which initiated that event (system::variablename) in a messagebox. I added two scripts to the main workflow, one changes one variable, one the other.
To see what's happening I placed a breakpoint on the script in the event handler. I start the package, the first script is executed, the event is fired and the script is started. The breakpoint stops executing the package. So good so far. When I now click on "continue" the script task in the event handler changes to "yellow" and I hear a beep. That's all. I don't see any other action in the package, the second script is not started and the run seams to be locked.
What's wrong? Is the problem sitting in front of the monitor? Am I the 1000th person hitting that bug?
Thanks,
View 1 Replies
View Related
Oct 2, 2006
Hi All,
Could you please help me?
I have a problem with T-SQL stored procedure, which call the CLR Stored Procedure, and when it runs into it my Visual Studio gets berserk, looping like crazy, eating 100% CPU and gobling off more and more memory. The Visual Studio out into the the Output window the following message over and over again:
WARNING: Debugger was accessing T-SQL variables while managed code was not suspended. Waiting until the access is done to continue T-SQL execution.Continueing T-SQL execution.
WARNING: Debugger was accessing T-SQL variables while managed code was not suspended. Waiting until the access is done to continue T-SQL execution.Continueing T-SQL execution.
The only way to stop it is by killing the Visual Studio process. Then I have to stop, or sometimes even kill the SQL server to bring the CPU down from 100%.
What should I do to avoid this problem? Thank you very much for the help.
View 3 Replies
View Related
