Hi for all
i just get the news that the Dec. CTP of SQL Server 2005 & tools is released !
but my dream is to see debugging stored procedure support inside the SSMSE as debugging applications inside Visual Studio 2005
Many many many thanks to Microsoft and for the great efforts on the cool products
Mohamed
Hi all - I'm trying to optimized my stored procedures to be a bit easier to maintain, and am sure this is possible, not am very unclear on the syntax to doing this correctly. For example, I have a simple stored procedure that takes a string as a parameter, and returns its resolved index that corresponds to a record in my database. ie
exec dbo.DeriveStatusID 'Created'
returns an int value as 1
(performed by "SELECT statusID FROM statusList WHERE statusName= 'Created')
but I also have a second stored procedure that needs to make reference to this procedure first, in order to resolve an id - ie:
exec dbo.AddProduct_Insert 'widget1'
which currently performs:SET @statusID = (SELECT statusID FROM statusList WHERE statusName='Created')INSERT INTO Products (productname, statusID) VALUES (''widget1', @statusID)
I want to simply the insert to perform (in one sproc):
SET @statusID = EXEC deriveStatusID ('Created')INSERT INTO Products (productname, statusID) VALUES (''widget1', @statusID)
This works fine if I call this stored procedure in code first, then pass it to the second stored procedure, but NOT if it is reference in the second stored procedure directly (I end up with an empty value for @statusID in this example).
My actual "Insert" stored procedures are far more complicated, but I am working towards lightening the business logic in my application ( it shouldn't have to pre-vet the data prior to executing a valid insert).
Hopefully this makes some sense - it doesn't seem right to me that this is impossible, and am fairly sure I'm just missing some simple syntax - can anyone assist?
Just wonder whether is there any indicator or system parameters that can indicate whether stored procedure A is executed inside query analyzer or executed inside application itself so that if execution is done inside query analyzer then i can block it from being executed/retrieve sensitive data from it?
What i'm want to do is to block someone executing stored procedure using query analyzer and retrieve its sensitive results.
Stored procedure A has been granted execution for public user but inside application, it will prompt access denied message if particular user has no rights to use system although knew public user name and password. Because there is second layer of user validation inside system application.
However inside query analyzer, there is no way control execution of stored procedure A it as user knew the public user name and password.
Looking forward for replies from expert here. Thanks in advance.
Note: Hope my explaination here clearly describe my current problems.
Hi all,
I am trying to debug stored procedure using visual studio. I right click on connection and checked 'Allow SQL/CLR debugging' .. the store procedure is not local and is on sql server.
Whenever I tried to right click stored procedure and select step into store procedure> i get following error
"User 'Unknown user' could not execute stored procedure 'master.dbo.sp_enable_sql_debug' on SQL server XXXXX. Click Help for more information"
I am not sure what needs to be done on sql server side
We tried to search for sp_enable_sql_debug but I could not find this stored procedure under master.
Some web page I came accross says that "I must have an administratorial rights to debug" but I am not sure what does that mean?
Please advise..
Thank You
Hi all,
I need to debug a stored procedure. Is there a tool or do I need to popup message boxes to know what values are processed ?
Your response is appreciated.
Thanks.
can anyone suggest any method for the debugging of stored Procedure in Sql Server.Like step by step debugging in VB
View 1 Replies View RelatedI've got a stored procedure which does a database search for me. It is working fine, but for some reason it isn't finding what I expect. I think the problem is that the vairables are not being passed as I expect but I cannot work out how to see the intermediate SQL in the stored proc... in oracle there used to be some sort of set feedback on option which meant that all SQL which was being run was shown... is there some way of doing this in SQL Server 2005?
Thanks
Hi Folks,
I'm using SQL Server 2005 Express and I need to debug my stored prodedure. I've been reading online that it can be done in the Express edition but no one explains how to do it. There's plenty of instructions online on how to debug stored procedure in the other versions of SQL Server 2005. Do any of you know how to do it?
Thanks in advance
In VS 2005 with SQL Server Express: How do I debug a stored procedure that is called from a object datasource control while the asp.net code is running? Thanks
View 1 Replies View Related
To the Moderator:
I am not sure if this thread needs to go into this forum or there is one for C# stored procedures/CLR Database Objects.
To All:
Is this a known issue that when debugging CLR stored procedures the VS 2005 freezes even before reaching into the stored procedure? I can restart my computer and debugging works for a while and then it starts to take forever when I step into (F10) during debugging. I am running only one instance of sql server, and even that of my local machine as I have never been able to debug on a remote server.
This random and unstable behavior of the debugger is proving very unproductive and costly. Is there a microsoft update/fix/patch to make debugging CLR stored procedures a smooth process?
Thanks.
hi friends,
Anyone give give me the steps we have to follow for debussing a stored procedure in sql server 2005...
Hi ,I am using Visual studio 2005 with sql server 2005. I want to debug my stored procedure, which is situated on the server on the network(accessible through network share). I followed the following URL: http://aspnet.4guysfromrolla.com/articles/051607-1.aspxI have used Direct database debugging : When I right click my stored procedure and click 'step into stored procedure', I get the following error: "Unable to start T-SQL debugging. could not attach
to SQL server process on 'sql_server_name'. The remote procedure call failed and did not
execute" I am using windows authentication to login to sql server Any help?
I need help debugging a CLR stored procedure that is being called from an SSIS package. I can debug the procedure itself from within Visual Studio by using "Step into stored procedure" from Server Explorer, but really need to debug it as it is being called from SSIS.
View 4 Replies View Related
I need help debugging a CLR stored procedure that is being called from an SSIS package. I can debug the procedure itself from within Visual Studio by using "Step into stored procedure" from Server Explorer, but really need to debug it as it is being called from SSIS.
Can I invoke stored procedure stored inside from a user defined table column?
View 5 Replies View RelatedCan anybody explain how to do debug a stored procedure from SQL Query Analyser.
When i tried opening Query Analyser and pressing F8 i am able to see Object Browser on left side, i selected the d/b and expanded it then i selected a stored procdure by right click of mouse. I selected "Debug".
It shows me alert msg "SQL Debugging may not work properly if you log on as 'Local System Account' while SQl server is configured to run as a service. You can open Event Viewer to see details." DO U WISH TO CONTINUE- I selected "YES"
I am able to see 3 split windows on right side and GO, Toggle, Untoggle are enabled BUT Step Into, Step Over, Step Out...Stop debugging are disabled at menu bar.
The 1st right split window shows the proc code, 2nd split window shows Local-Global-Callstack none of them shows any values(blank), 3rd split window shows records(result) and
@RETURN_VALUE = 0 message
I had Toggled at each and every line of the procedure in 1st split window still it doesnt respond anything.
What might be the problem, how to solve it do i need to give any permissions.
i tried logging from wind Authentication and also from Sql Authentication (sa/sa), still same problem occurs. By the way i am using SQL Server 2000.
Pls help me out
Thanks in advance
Murali Kumar
Hi Everyone!
Just started looking into Assemblies within SQL Server in the hope of creating a multi-threaded application and when writing a basic test assembly I came across the following problem...
When I create a worker thread within my assembly I am unable to do the following in my newly created thread:
Stop on a breakpoint in VS2005
Use Debug.Writeline to output to the output window
I know the thread is running as I am able to write to the EventLog, but VS2005 seems to be unaware of any thread other than the main SQL server thread.
If anyone could tell me whether there it is possible to debug non-SQL server threads, whether I am doing something wrong, or whether I should be doing things differently that would be great!
Thanks in advance for any help!!
The code is as follows (apologies as its not very well written!):
using System;
using System.Data;
using System.Data.SqlClient;
using System.Data.SqlTypes;
using Microsoft.SqlServer.Server;
using System.Threading;
using System.Diagnostics;
public partial class StoredProcedures
{
/// <summary>
/// This stored procedure starts the comms
/// </summary>
[Microsoft.SqlServer.Server.SqlProcedure]
public static void StartComms()
{
try
{
// Output some debug output to show the thread is running
Debug.WriteLine("Comms is starting");
// Create the thread to run in the main thread class
Thread zThread = new Thread(new ThreadStart(ThreadFunction));
// Start the thread running
zThread.Start();
// Sleep to let the other one run
Thread.Sleep(2000);
// Output some debug output to show the thread is running
Debug.WriteLine("Comms is about to wait for thread to finish");
// Wait for the thread to complete
zThread.Join();
// Output some debug output to show the thread is running
Debug.WriteLine("Comms is ending");
}
catch
{
throw;
}
}
/// <summary>
/// The main thread function
/// </summary>
public static void ThreadFunction()
{
try
{
// Flag to keep thread running
bool bRunning = true;
// While the thread is running
while (bRunning == true)
{
// Output some debug output to show the thread is running
Debug.WriteLine("Thread function running");
System.Diagnostics.EventLog.WriteEntry("SQLServerThreadTest",
"Thread function is running");
// Sleep for two seconds
Thread.Sleep(5000);
}
}
catch
{
throw;
}
}
};
Hi,
Do you know how to write stored procedures inside another stored procedure in MS SQL.
Create procedure spMyProc inputData varchar(50)
AS
----- some logical
procedure spMyProc inputInsideData varchar(10)
AS
--- some logical
--- go
-------
hi all,
i'm wondering if i can use one stored procedure in too cases, this is the senario:
i have stored procedure for admin and another one for user, they have the same select everything is the same except that in admin SP i have where @admin = admin and for user i have where @user = user
if there a way to use if and else to make this happen
this is what i did so far:
CREATE PROCEDURE [test] @admin INT, @user INT, @indexType INT as
if @indexType = 1
begin
SELECT * FROM table WHERE something IN (SELECT * FROM anothertable where admin = @admin)
end
else
begin
SELECT * FROM table WHERE user = @user
end
GO
any suggestion will be very helpful
thanks
I want to execute some insert statements within a stored procedure and commit those changes regardless of any raiseerror that occurs later in the stored procedure. My difficulty is that I am forced to use raiseerror with severity 16 in order to send a message through the powerbuilder application interface (compiled vendor code). I have tried save points but can't get that to save my insert and still present an error to the user about something else that happens later.
here is an example
BEGIN procedure
Insert something and save it even if error is raised below
RaiseError('you made a mistake and need to do this.',16,-1)
END procedure
Hi folks
I nead to call a stored procedure in a where statemene, but MSSQL dont like that.
My problem is that the StoredProcedure is calling itself recursive and therfore its impossible to add the code as a standard SELECT statement. Here is the code
ALTER PROCEDURE dbo.advsp_FilterRecordRights
@RequesterGUID Char(20),
@EntityGUID Char(20)
AS
BEGIN
if not Exists(Select *
from GUIDRightsH
where GUIDRightsH.EntityGUID = @EntityGUID and
GUIDRightsH.RequesterGUID = @RequesterGUID and
GUIDRightsH.RecProp <> 0)
Begin
Return 1
end
if not Exists(Select *
from UsergroupMembers
where UserGroupMembers.UsergroupGUID = @RequesterGUID and
dbo.advsp_FilterRecordRights(UserGroupMembers.UserGUID,@EntityGUID) = 1)
Begin
Return 1
end
Return 0
END
Basically I have two strings. Both strings will contain similar data because the 2nd string is the first string after an update of the first string takes place. Both strings are returned in my Stored Procedure
For example:String1 = "Here is some data. lets type some more data"String2 = "Here's some data. Lets type some data here"I would want to change string2 (inside my Stored Procedure) to show the changed/added text highlighted and the deleted text with a strike though.
So I would want string2 to look like thisstring2 = "Here<font color = "#00FF00">'s</font> <strike>is</strike> some data. <font color = "#00FF00">L</font>ets type some <strike>more</strike> data <font color = "#00FF00">here</font>"
Is there an way to accomplish this inside a stored procedure?
This example is working:
Declare @startRowIndex INT; set @startRowIndex = (@PagerIndex * @ShowMembers); With BattleMembers as ( SELECT TOP 20 ROW_NUMBER() OVER (ORDER BY LastActivityDate DESC) AS Row, UserId, UserName FROM aspnet_Users) SELECT UserId, UserName FROM BattleMembers WHERE Row between @startRowIndex and @startRowIndex+@ShowMembersEND
and this one doesn't work:USE [xx]GOSET ANSI_NULLS ONGOSET QUOTED_IDENTIFIER ONGOALTER PROCEDURE [dbo].[battle_Paging]@PagerIndex INT,@ShowMembers INT ASBEGINDeclare @startRowIndex INT; set @startRowIndex = (@PagerIndex * @ShowMembers); With BattleMembers as ( SELECT TOP 20 ROW_NUMBER() OVER (ORDER BY aspnet_Users.LastActivityDate DESC) AS Row, aspnet_Users.UserId, aspnet_Users.UserName, mb_personal.Avatar FROM aspnet_Users LEFT JOIN mb_personal ON (mb_personal.UserID=aspnet_Users.UserId) SELECT UserId, UserName, Avatar FROM BattleMembers WHERE Row between @startRowIndex and @startRowIndex+@ShowMembersEND
Error:Msg 156, Level 15, State 1, Procedure battle_Paging, Line 18Incorrect syntax near the keyword 'SELECT'.
I try to join in the table mb_personal here. Some help would be very appreciated! Thanks.
Hello, I have a situation that I query a table and return multiple rows (email addresses). I want to iterate through the rows and concatenate all email addresses into one string (will be passing this to another stored procedure to send mail). How can I process result rows inside a stored procedure? This is what I have so far: CREATE PROCEDURE [dbo].[lm_emailComment_OnInsert] @serviceDetailID int,@comment varchar(500),@commentDate DateTime,@commentAuthor varchar(100)ASBEGINDECLARE @serviceID intDECLARE @p_recipients varchar(8000)DECLARE @p_message varchar(8000)DECLARE @p_subject varchar(100)/* Grab the Service_id from underlying Service_Detail_id*/SELECT @serviceID = Service_id FROM lm_Service_Detail WHERE Service_Detail_id = @serviceDetailID/* Get email addresses of Service Responsible Parties */
SELECT DISTINCT dbo.lm_Responsible_Party.EmailFROM dbo.lm_Service_Detail INNER JOIN
dbo.lm_Service_Filing_Type ON dbo.lm_Service_Detail.Service_id = dbo.lm_Service_Filing_Type.Service_id INNER JOIN
dbo.lm_Responsible_Party_Filing_Type ON dbo.lm_Service_Filing_Type.Filing_Type_id = dbo.lm_Responsible_Party_Filing_Type.Filing_Type_id INNER JOIN
dbo.lm_Responsible_Party ON dbo.lm_Responsible_Party_Filing_Type.Party_id = dbo.lm_Responsible_Party.Party_idWHERE (dbo.lm_Service_Detail.Service_Detail_id = @serviceDetailID)/* Build message */
SET @p_subject = "KLM - Service ID: " + CAST(@serviceID AS varchar(4))SET @p_recipients = "" /*need string of addresses*/
SET @p_message = @p_message + "Service Detail ID: " + CAST(@serviceDetailID AS varchar(4)) + char(13)SET @p_message = @p_message + "Comment Date: " + CAST(@commentDate As varchar(25)) + char(13)SET @p_message = @p_message + "Comment Author: " + @commentAuthor + char(13)SET @p_message = @p_message + "Comment: " + @comment + char(13)PRINT "subject: " + @p_subject + char(13)PRINT "recip: " + @p_recipients + char(13)PRINT "msg: " + @p_message + char(13)/*Send the email*/
Execute master..xp_sendmail @recipients = @p_recipients, @message = @p_message, @subject = @p_subject END
GO
I am having problem with 'TOP @pageSize'. It doesn't work, but if I replace it by 'TOP 5' or 'TOP 6' etc., then the stored procedure runs without errors.
Can someone please tell me how I could use @pageSize here so that it dynamically determines the 'n' of 'TOP n' ?
ALTER PROCEDURE dbo.spGetNextPageRecords
(
@pageSize int,
@previousMaxId int
)
AS
/* SET NOCOUNT ON */
SELECT Top @pageSize ProductId, ProductName
FROM Products
WHERE (ProductID > @previousMaxId) order by ProductId
RETURN
Hello :) I need to do something like this:
CREATE PROCEDURE SelectCostumers @name varchar(100)
Declare @SQL = "SELECT Id, Name FROM Costumers"
AS
IF (@name IS NULL)
@SQL
ELSE
@SQL += "WHERE Name LIKE @name"
See, what I need is a string variable that I can concatenate with whatever I want depending on the parameter I get.
Thank you
I am trying to creating a table inside a stored procedure using SQL that works fine in Query Analyzer. However, when I check the syntax I get the following message:
Error 208: Invalid object name '##OPTIONSEX'
I am using the following SQL script:
CREATE PROCEDURE [dbo].[Test2] AS
CREATE TABLE ##OPTIONSEX
(
OPTION_PLAN VARCHAR(50),
TOT_OPTIONS_EXCHANGED FLOAT NULL
)
GO
INSERT ##OPTIONSEX
SELECT
B.COMPONENT,
TOT_OPTIONS_EXCHANGED = SUM(A.UNITS)
FROM TBLEXERCISEOPTIONS A, TBLCOMPONENT B
WHERE B.COMPONENTID = A.COMPONENTID
GROUP BY B.COMPONENT
GO
Any help getting this to run correctly would be appreciated.
Hi Folks!
I have a cursor inside a stored procedure that should identify rows based on certain criteria and update the columns on those records.
While I try to do so, the cursor goes into an infinite loop although I have only 1 record that matches my criteria. I think that the transaction is not commited and the cursor is picking up the same record for update.
Here is my sample record in table :tblMsg
SenderRef <space> MsgStatusId <space> MsgType <space>Groupid
1281341<space> 1 <space>KBC-NON-ETC-MATCHED-BLIM <space>191902
1281341 <space>18 <space>KBC-RCVD-ADM <space>191902<space>
and here is my code.
CREATE PROCEDURE msg_ResolveADMBeforeBlim
AS
DECLARE @blimGroupId AS INT
DECLARE @admSenderRef AS VARCHAR(50)
DECLARE admCursor CURSOR FOR
SELECT senderref
FROMtblMsg
WHERE msgstatusid = 18
AND msgtype = 'KBC-RCVD-ADM'
FOR UPDATE
OPEN admCursor
FETCH NEXT FROM admCursor INTO @admSenderRef
WHILE @@FETCH_STATUS = 0
BEGIN
--FIND CORRESPONDING BLIM RECORD AND GRAB ITS GROUPID TO UPDATE THE ADM
SELECT @blimGroupId = GroupID
FROM tblMsg
WHERE msgType = 'KBC-NON-ETC-MATCHED-BLIM'
AND SenderRef = @admSenderRef
PRINT 'AFTER SELECT INSIDE WHILE: Senderref- >' + @admSenderRef;
--UPDATE THE ADM RECORD WITH THE GROUPID AND MSGSTATUS = 3
BEGIN
UPDATE tblMsg
SET MsgStatusId = 3, GroupId = @blimGroupId
WHERE CURRENT OF admCursor
END
PRINT 'AFTER UPDATE INSIDE WHILE';
END
CLOSE admCursor
DEALLOCATEadmCursor
The update statement was included beteween a BEGIN TRAN and END TRAN. But no joy.
Any ideas why this would happen?
Thanks for your help.
Arun
Okay, so I have a problem and I would be REALLY grateful for anyassistance anyone can offer because I have found little or no help onthe web anywhere.I want to access and do joins between tables in two different SQL db'son the same server. Heres what Im dealing with.In one database resides all of my security features for our clients,where it decides who can login, etc etc....In another database, I need to cross reference with a few fields in mysecurity db.See the issue Im running into here is that because the way the peoplehave their databases set up for different products, I would normallyhave to put these tables with security features in every database...which is horrible, because every time I do an update I would have todo it in 12 different places. Thats not efficient at all.So I thought if I had one central DB, where all security features arecontrolled from, that would be perfect... now the issue is crossreferencing and doing joins with other tables that ARENT in the samedb....have I lost you yet?I appreciate all of your help!THANKS!!
View 5 Replies View RelatedHi,
I have to write a stored procedure what repair a table.
It have to delete lost rows before make relation to itself (PK column is 'Kw_KeywordID', FK column is 'Kw_ParentID').
I do not found the way to write this procedure to can create statement from parameter of the procedure.
I would like to pass the table name, but I receive error if the query like 'Select ... Form @Table ....'.
If the parameter is in the 'WHERE', nothing problem.
My procedure is:
CREATE PROCEDURE sp_Repair_IS_KW_AbtKz176
AS
BEGIN
-- SET NOCOUNT ON added to prevent extra result sets from
-- interfering with SELECT statements.
SET NOCOUNT ON;
declare @OrphanRowCount int
select @OrphanRowCount = 1
while(@OrphanRowCount > 0)
begin
DECLARE KWCursor CURSOR FOR
SELECT count(*) AS cRowCount FROM IS_KW_AbtKz176 WHERE Kw_ParentID IS NOT NULL AND Kw_ParentID NOT IN (SELECT Kw_KeywordID FROM IS_KW_AbtKz176);
OPEN KWCursor;
FETCH NEXT FROM KWCursor INTO @OrphanRowCount
CLOSE KWCursor
DEALLOCATE KWCursor
IF (@@FETCH_STATUS = 0) AND (@OrphanRowCount > 0)
BEGIN
exec('DELETE FROM IS_KW_AbtKz176 WHERE Kw_ParentID IS NOT NULL AND Kw_ParentID NOT IN (SELECT Kw_KeywordID FROM IS_KW_AbtKz176)')
END
end
END
GO
How can I run fully parameterized queries from an SP.
I can make it only like exec('DELETE FROM' + @TableName + ...)
Thank you for any idea,
Imre
Dear all,i'm facing a problem with my storedprocedure which happened when i ran my web application and reach to the point where my class invoke this storedprocedure,my SP contains a cursor that built his sql according to certain condition, so i put the "SET @cur Cursor For....." inside the if block (definitely i've declared it under AS keyword directly) and this SP is working well inside sql server(I've tested it), BUT when my ASP.net code invoke this SP it gives me the following error : "The Variable @cur does not currently have a cursor allocated to it" repeated as much as there are IF clauses in my SP,Please Help.Regards,
View 1 Replies View RelatedI want to use a stored procedure inside Sql Server from my aspx page so that the data entered in the form goes to the database after submit.
My stored procedure (inside the SQL Server) inserts several fields in a table and it returns two variables.
What code I need to write in order to pass the data from the form to the stored procedure inside the Sql Server? And to store the two returned values?
Thanks
Hi,
I'm new to ASP.NET 2.0. I have a sqldatasource and a formview controls on a web page and inside the formview control I have two textboxes. When I click the UPDATE button in the formview, I'd like to be able to retrieve the values of the textboxes inside the formview control and pass these values to a 'Update' SQL stored procedure defined in the Sqldatasource.
Does anyone know how I can do this? Hope my question is clear.
Thanks in advance.
hakl