I have a
table with column (call it Rate) defined as decimal(18,4). This column
can have any positive decimal value. When the value is less than 1
(e.g. 0.1234) strange things are happening in SSIS.
To set the scenario ...
If I do a select in Management Studio, the value is correctly displayed as 0.1234
If I do the same select from the command line via OSQL, I get .1234
If I do SELECT CONVERT(char(6), Rate) from OSQL, I get 0.1234 (which is what I want)
In SSIS I have an OLE DB Source which defines the SELECT statement to use, and that maps straight to a Flat File Destination.
The
default column type in the flat file connection manager is DT_NUMERIC,
Precision 18, Scale 4. I Set InputColumnWidth to 6 as that's how I need
it in the flat file. The value appears in the file as .1234
I
change the SELECT in the OLEDB Source to apply the CONVERT(char(6),
Rate), and change the column type in the connection manager to DT_STR
length 6. Output is *still* .1234
How can I get the output column in my file to show 0.1234 ??
Hi All, In one of my SSIS Interface I have to Merge data from a Oledb source and a Flat file source.But after I read from the flat file I have do a basic validation of the file for the length of header,detail and trailer records and then process further.The above Validation I am doing within Script Component.If the validation fails the flow should pass out of the DataFlowTask without Initailsing the Oledb source.
But the problem is i am not able to connect anything to the Oledb source,i.e Oledb source is not taking any incoming Pointers. Earlier I had done the same Validation in Control Flow Task,but then the interface was reading the same file twice,once in the Control Flow Task and then again in the DataFlowTask.Which i should avoid now.
I hope many of you could have come across such a problem. Any help on this will be appreciated.
I am working to archive some old data from a data warehouse using SQL server and SSIS. The data will be read and denormalized, then shipped out to a delimited text file.
The rowcount of the incoming data is significant, call it 10M+ rows per unit of work (one text file).
There are development advantages of using a stored proc for the data source - mainly ease of changing the denormalization logic as required. Wondering if there are performance advantages of an embeded query for the data source instead?
It was mentioned by one developer that when using a stored procedure, the output stream from the proc and subsequent SSIS steps cannot start until the full procedure processing is complete; i.e. the proc churns out its' result set in one big chunk.Â
He hinted that an embedded query does not have this same effect, but I am not sure that is accurate.
I m using SSIS and i am transfering the data from Flat File Source to the OLE DB destination File. The source file contain some corrupt data which i am transfering to the other Flat file destination file.
Debugging is succesful but i am not getting any error output in the Flat file destination file.
i had done exactly which is written in the msdn tutorial of SSIS.
Plz tell me why i am not getting the error output in the destination flat file?
I am using a data flow task, and outputting the results from the ole db source adapter to a flat file by calling a function. That part works fine.
However, I want the text fields to be surrounded by double-quotes, like so:
"data1", "data2", "data3"
However, what I'm getting is:
"data1 ","data2 ","data3 "
I tried both specifying a "text qualifier" and when that didn't work, I removed the text qualifier and put quotes around the columns in my select statement. But that didn't work either.
i am trying to load almost 15 csv files to my oledb destination can i use for each container to map the source columns dynamically to destination table during data flow task
My OLE DB Source is getting data from the following column types:
ID varchar(50), Name varchar(100), Date datetime, Currency char(3), Cost numeric(30,10)
My OLE DB Source outputs my information in the following order when I click Preview:
ID Name Date Currency Cost
When I connect the OLE DB Sorce to a Flat File Destination, it comes out in the wrong order.When I examine the "line" between them (Data Flow Path Editor) I get:
Currency DT_STR Length: 3
ID DT_STR Lenght: 50
Name DT_STR Lenght: 100
Date DT_DBTIMESTAMP
Cost DT_NUMERIC
What is the easiest way for me to change this so the Flat File Destination will output my data in the same order as the OLE DB Source:
Problem importing data from flat file into decimal(9,2) field. The data in the flat file is 000001453 and I am copying it to a decimal(10,2) field and instead of showing up in the 0000014.53 it comes across as 0001453.00. I tried defining the input columns a few different ways but none seemed to work. How do I do this with SSIS or do I need to write a SP and use convert? Thanks.
We are importing Flat file data from our Mainframe system. We have a lot of money amounts coming in, but the mainframe does not store the decimals in the flat file. So for example a row in the file might look like this:
+0000007894-0000000563
Where the first value is $78.94 and the second value is -$5.63
Is there anyway to have the Flat file connection manager put in the decimal place for me, or do i have to create derived columns for each column and divide it by 100? There like 50-100 columns per file, so i'm looking for a better, quicker way.
I am trying to create a program that transfers tables to flat files. At this point in time, I have suceeded in created one that creates delimited files.
However, I am now trying to create fixed-width files as you can do with the SSIS designer, but programatically.
Is there a way to programatically determine the width of a column from the source table? I can not seem to find any kind of function or member that stores this information or allows me to retrieve it.
I know what I need to change in order to set a width for a column, but I just don't know how to find the width without just asking the user to provide one.
Copy a full directory from source to destination (Done)
then for each file on the destination directory,it must process that file and insert rows on the table.
So I created a foreach loop, and created a varriable aclled CURRENTFILENAME, and assigned it into the foreachloop to index 0.
Inside the foreachloop I created a dataflow task, in the dataflow task I dragged a flat file source and an oledb destination, but I noticed that the flat file source requires flat file manager, and the flat file manager requires a unique FILE NAME. I cant put this c:copia*.txt.
I took a loot at flat file source properties and it has associated the flat file manager, but I can not assign the filename to the variable from the foreach.
I have Flat File as my source. Before i tried to load the data in to ORACLE Destination thru SCD component the error was with ole db.
any ways i try to load the data in Access DB but I€™m getting different error in same component (OLE DB) After SCD Component. can any one help me out in this.
I have some problems with the "Flat File Source" ... I am trying to load a textfile, but IS allways cuts the rows ... When I look at the preview while designing, the row is complete, so I am wondering what IS is doing ...
I've been working 4 days non stop on this project, lost a complete weekend on it and I totally had it. Please have a look at this "simple" question:
I have a for each loop that checks for csv files in a folder. The path of the file(s) is stored in a variable varFileName. So far so good. But then I start with a data flow task and inside that data flow task I need to access one of those csv files at the time whenever it loops.
So my best guess is use a flat file source because that's the only task I see in the list that fits my question. But the thing is, you set up a connection to a....yes right, a flat source connection and there you have to select a flat file.
But no, I don't want to select ONE file, I need to access them all as the loop goes through all files. I'm sure this is something easy but I don't see it anymore.
I'm off taking a nap, need sleep Could someone please point me to a direction?
I have a SSIS package loading a lot of CSV file, which first line is the column head. Some file are ordered differently. However, package still try to load the file use predefined column order (it seems it doesn't check the head of each file see if it matchs the predefined column order).
Any way to force the package the check each file's head? or I had to manually check it using VB.Net script?
I am trying to make a SSIS package that will loop trough all files in a directory and load information from them.
I can do this with Raw File Sources since they allow me to use a variable name as the file path, but I cant seem to do the same with Flat File Sources. Is there a way to change the connection to a Flat File Source on each iteration of a loop? Actually, if this is possible with all types of file sources (like excel files) I would love to know about it too.
I was thinking about renaming the file through a script task but that does not seem like the most elegant solution so decided to see if some one here knows of a more proper way before I go that direction.
I want to read the following file using the Flat File Source flow:
10000 Router 20000 Hub 10000 Switch 30000 Server 40000 Harddisk
Spaces are used between the numbers (e.g. 10000) and the following text (e.g. Router). Each line is temrinated by a {CR}{LF} pair. I would normally think of this as a "fixed width" file.
But in the Flat File connection manager, if I use format "Fixed width", the preview shows a row width of 1 character wide (the first row contains the number "1"; the next row contains "0", and so on for the remaining 3 rows.in the first line) Not what I had in mind. How do I setup SSIS to handle this file in intended maner?
TIA,
Barker
P.S. I never had any trouble with this type of file under Sql 2000 DTS. Also, have you noticed the crappy-looking "bitmap" displayed when one wants to click and define columns for a fixed-width file?
I have a weird thing happening. I have an .csv file. When I try to load it into a table, I can do it easily in DTS 2000. But when I am trying to do it in SSIS 2005 with exactly the same settings (like Text qualifier, row delimiter etc.), I am getting an error: "The last row in the sampled data is incomplete. The column or the row delimiter may be missing or the text is qualified incorrectly." I looked at the file and it looks complete to me.
What could be the problem ?
P.S. DTS 2000 is on 32-bit Windows, and SSIS 2005 is on 64-bit Windows 2003. Could that we a problem ?
i am importing a file using the Flat File Data Flow Source, it works fine but seems to miss data records every so often (not entire rows, just records inside the rows). The file has 149 columns and usually has around 15,000 to 20,000 rows.
For example, this is a sample of the input: AccountNum, CancelDate, CancelReason 123~2/2/08~ADC 345~2/1/08~CCC 789~2/5/08~CRC
After the Flat File Source imports the file I get back: AccountNum, CancelDate, CancelReason 123~2/2/08~ADC 345~2/1/08~ 789~2/5/08~CRC
has anyone ever seen this or heard of this happening. It is usually the same column that misses records and this only happens when it runs from a job (in debug mode it always works fine).
I have a simple SSIS package -> It reads a local text file which has 10 rows of data ( id, name, telephone # ) and puts it into a table.
It uses the "SSIS Flat File source" to read and a "SQL Command" to insert into the table. I can see that it reads line by line and puts each line into one row in my table.
Now, my production data is over 5 GiG of mainframe data and it seems their data is arranged in some hierarchical form.. so the position or arrangement of data in that file is important.
I pulled the data using my package and as far as I can see , my SSIS package pulled one line at a time ( from the flat file) and pushed it into my table. For each row, I also created an identity column in my table to be able to identify the positional arrangement of the hierarchical data and then use relational mappings to suit our business needs.
In all of this, my assumption is -
"SSIS reads one line at a time, inserts to my table and goes down to the next line .
It does NOT read a snapshot of rows from the flat file so as to write them into the table using internal ordering methods based on that particular snapshot "
I have this SSIS data flow ( Flat file to sql server) that I want to add a step to redirect any "bad" data instead of fail out.
I had the red arrow hocked up to a sql new table to dump the bad data, but the flow still failed.
Here is the first error, and I knew what was wrong. A description field in that line has pipe(|) character in it, which also happen to be the column delimiter in this case.
[Flat File Source [1]] Error: Data conversion failed. The data conversion for column "Column 22" returned status value 4 and status text "Text was truncated or one or more characters had no match in the target code page.".
I knew if I fixed the data, every thing will be fine, but I just want to use this redirect feature of SSIS. Is there a place where I can turn off validation, or do something to make it work?
I am attempting to pull in data from a flat file data source that contains dates in the following format "01012007 10:22" which translates to Month Day Year and Military Time. I want to turn this into a DateTime format so that I can insert it into the proper column. I have a SQL statement which will do this (see bellow), but I can't figgure out how to run the statement on the data before it reaches its destination.
For some reason, when I try to use the Flat File Source and set the record type to Ragged Right it does not seem to recognize 'short' records. It seems to be confused by the CRLF set delimiters and not recognize these in 'some' records. The input does not seem consistent. What am I missing?
