I have decimal(6,2) defined in a column. If I insert 90.6, it will display 90.60 , 0 becomes .00 .
Is there a way or configuration change so the 0's will on the last will not be showing. And
the 0 will display as 0 not .00?
I am creating a table on SQL Server. One of the columns in this new table contains whole integer as wells as decimal values (i.e. 4500 0.9876). I currently have this column defined as Decimal(12,4). This adds 4 digits after the decimal point to the whole integers. Is there a data type that will have the decimal point only for decimal values and no decimal point for the whole integers?
I would like to cast (convert) data type decimal(24,4) to decimal(21,4). I could not do this using standard casting function CAST(@variable as decimal(21,4)) or CONVERT(decimal(21,4),@variable) because of the following error: "Arithmetic overflow error converting numeric to data type numeric." Is that because of possible loss of the value?
The table in SQL has column Availability Decimal (8,8)
Code in c# using sqlbulkcopy trying to insert values like 0.0000, 0.9999, 29.999 into the field Availability we tried the datatype float , but it is converting values to scientific expressions€¦(eg: 8E-05) and the values displayed in reports are scientifc expressions which is not expected we need to store values as is
Error: base {System.SystemException} = {"The given value of type SqlDecimal from the data source cannot be converted to type decimal of the specified target column."}
"System.InvalidOperationException: The given value of type SqlDecimal from the data source cannot be converted to type decimal of the specified target column. ---> System.InvalidOperationException: The given value of type SqlDecimal from the data source cannot be converted to type decimal of the specified target column. ---> System.ArgumentException: Parameter value '1.0000' is out of range. --- End of inner exception stack trace --- at System.Data.SqlClient.SqlBulkCopy.ConvertValue(Object value, _SqlMetaData metadata) --- End of inner exception stack trace --- at System.Data.SqlClient.SqlBulkCopy.ConvertValue(Object value, _SqlMetaData metadata) at System.Data.SqlClient.SqlBulkCopy.WriteToServerInternal() at System.Data.SqlClient.SqlBulkCopy.WriteRowSourceToServer(Int32 columnCount) at System.Data.SqlClient.SqlBulkCopy.WriteToServer(DataTable table, DataRowState rowState) at System.Data.SqlClient.SqlBulkCopy.WriteToServer(DataTable table) at MS.Internal.MS COM.AggregateRealTimeDataToSQL.SqlHelper.InsertDataIntoAppServerAvailPerMinute(String data, String appName, Int32 dateID, Int32 timeID) in C:\VSTS\MXPS Shared Services\RealTimeMonitoring\AggregateRealTimeDataToSQL\SQLHelper.cs:line 269"
Code in C#
SqlBulkCopy bulkCopy = new SqlBulkCopy(sqlConnection, SqlBulkCopyOptions.Default); DataRow dr; DataTable dt = new DataTable(); DataColumn dc;
try {
dc = dt.Columns.Add("Availability", typeof(decimal)); €¦.
dr["Availability"] = Convert.ToDecimal(s[2]); ------ I tried SqlDecimal €¦€¦€¦.
I have calculated values such as ; OP1: 0,8625OP2: 31OP3: 0,965034965034965OP4: 0,8625OP5: 0,85OP6: 0,931506849315068OP7: 31MOV1 : 9,02903225806451MOV2: 8,68387096774194 I have a SQL database table where I defined all data fields decimal(18,2) for these valuesHere is my code ; Dim conn As SqlConnection = New SqlConnection("Data Source=SERDARSQLEXPRESS;Initial Catalog=Borsa;Integrated Security=True")Dim sql As String = "UPDATE StockParametre SET OPT1 = @opt1, OPT2 = @opt2, OPT3 = @opt3, OPT4 = @opt4, OPT5 = @opt5, OPT6 = @opt6, OPT7 = @opt7, MOVY = @mov1, MOVD = @mov2 WHERE Stock = @TickerKod"Dim cmd As SqlCommand = New SqlCommand(sql, conn)cmd.Parameters.AddWithValue("@opt1", op1)cmd.Parameters.AddWithValue("@opt2", op2)cmd.Parameters.AddWithValue("@opt3", op3)cmd.Parameters.AddWithValue("@opt4", op4)cmd.Parameters.AddWithValue("@opt5", op5)cmd.Parameters.AddWithValue("@opt6", op6)cmd.Parameters.AddWithValue("@opt7", op7)cmd.Parameters.AddWithValue("@mov1", mov1)cmd.Parameters.AddWithValue("@mov2", mov2)cmd.Parameters.AddWithValue("@TickerKod", TickerKod) conn.Open()cmd.ExecuteNonQuery()conn.Close() When I run these code I have the fallowing error.. The incoming tabular data stream (TDS) remote procedure call (RPC) protocol stream is incorrect. Parameter 3 ("@opt1"): The supplied value is not a valid instance of data type float. Check the source data for invalid values. An example of an invalid value is data of numeric type with scale greater than precision..blabla ...I tried cmd.Parameters.AddWithValue("@opt1", FormatNumber(CDec(op1), 2)) but I have the error Error converting data type nvarchar to numeric. Thanks
I am using the statement below to calculate the average scores of the columns. When the result set is returned I would like to have a scale of 2. I am currently returning a scale of 6. What could I do to fix this?
Thanks for you help, John
SELECT ((CONVERT(decimal(4,2),c2_3) + CONVERT(decimal(4,2),c2_15) + CONVERT(decimal(4,2),c2_16) + CONVERT(decimal(4,2),c2_17)) / 4 * 100) AS Score_A FROM dataquestionnaire WHERE confirmation = '10/1/2001-999-1'
I need to store 256 bit hash (SHA-2 alogrithmn) in one of the table'sprimary key. I would prefer to use numeric data type rather varcharetc.* Decimal datatype range is -10^38 +1 to 10^38 -1. I can split my 256bit hash into two decimal(38, 0) type columns as composite key* I can store the hash as varbinary. I never used it and don't havemuch understanding in terms of query writing complexities and dealingit through ADO (data type etc.)It would be heavy OLTP type of systems with hash based primary keyused in joins for data retrieval as well.Please provide your expert comments on this.RegardsAnil
I have just loaded my db table from an excel file using the import wizard. Prior to the import, I set my data types and in the field that I need a number with 1 decimal place I chose a decimal data type.
Made since to me
However, now my numbers do not have the decimals. Please help.
I'm trying to update a decimal field with a single decimal number (1.8) the problem i'm having, is that it's rounding the number up (2). I would've thought that a decimal datatype would keep the decimal places correct?
This is quite annoying.. I've been searching around the web for an answer.. To no avail (I'm probably asking the wrong question)
Can someone please point me in the right direction?
Hi.. I have a column in the data base with the type Float, I want to limit the number of digits after decimal point to 2 when I display the value in ASP.NET but I don't know how!? the number that appear after calculation llike "93.333333" I use decimal(2,2) as data type but an error accour and this is the message "- Unable to modify table. Arithmetic overflow error converting float to data type numeric.The statement has been terminated." Can you help me.. thanks
So my data is delivered as numeric(9,2)...like 100.00. I have to extract that data and store it as a varchar 0 filled without the decimal place...like 0000010000///I tried the following and it did not work...
Happy Friday! A while since I have posted a question, and this one is probably real easy. I am trying to store numeric values from a php form in MSSQL 2000 database. However, the columns are set to float and if the value is 1.00, when entered into the table it is saved as 1
If I change the column type to money, the query fails, with an error message of conversion of datatype varchar to datatype money statement terminated.
anybody know what I need to do? do I need to do something in my query to specify that this is NOT varchar data?
I am trying to setup an indicator value for an SSRS report to show green and red values on a report, based on the NRESULT value. The problem I am facing is that I have several different CASE statements that have the same logic, and they are processing just fine. NRESULT is a decimal field, so no conversion should be necessary. I do not know why I am getting the "Arithmetic overflow error converting varchar to data type numeric." error message.
Below is the CASE statement where the error is occurring. It is in the part of the ELSE CASE. The first CASE works just fine when the ELSE CASE is commented out. If I also change the ELSE CASE statement to say "else case when LEFT(NRESULT,1) = '-' then '0'", then it processes fine, too, so it has to be something I am missing something in the check on negative values. I do need the two checks, one for positive and one for negative values, to take place.
case when LEFT(NRESULT,1) <> '-' then --This portion, for checking positive values, of the CASE statement works fine. CASE WHEN LEFT(ROUND(NRESULT,2),4) between 0.00 and 0.49 THEN '2' --Green ELSE CASE WHEN LEFT(ROUND(NRESULT,2),4) > 0.49 THEN '0' --Red ELSE '3' --White END END else case when LEFT(NRESULT,1) = '-' then --This portion, for checking negative values, of the CASE statement is producing the conversion error message.
[code]....
I checked the NRESULT field, and there are not any NULL values in there, either.
I am working with a legacy SQL server database from SQL Server 2000. I noticed that in some places that they use decimal data types, that I would normally think they should be using integer data types. Why is this does anyone know?
Example: AutomobileTypeId (PK, decimal(10,0), not null)
Hello, I heve the code below. double prix =TextBox1.Text; And I have SQL SERVER table Products in witch I have a column prix ( Decimal(16,4) ) But if I insert prix on my table products on the field prix. prix does not take the correct value. For example if TextBox1.Text=19,6 , the value inserted on the field prix in the table will be 20. Why ? How can we insert the correct value ?
This one cost me a solid half hour yesterday. I'm wondering why onearth the default precision for a decimal type is 18,0. Maybe I'mmistaken. A decimal datatype sort of implies that you'd want somethingafter the decimal!Question is, can I set this database-wide? Like all new decimaldatatypes have a precision of 12,6 or something like that? I haven'tseen anything about this in the googling I have done...
Hi Experts, I have an urgent needs. I want to store null for decimal type to sql server. But I do not know how to do that. I get data from user input. If the user did not enter anything in the textbox, then I want to store null to sql server. I list a piece od code below. I got error in the last line fItemObject.ChargeAmount = null;. if (!String.IsNullOrEmpty(txtDescription.Text)) myObject.LongDesc = txtLongDesc.Text; else myObject.LongDesc = null; if (!String.IsNullOrEmpty(txtAmount.Text)) myObject.Amount = Convert.ToDecimal(txtChargeAmount.Text); else myObject.ChargeAmount = null; // Then I submit the myobject to the sql server. Thank you very much in adavance!
This problem is strictly an SQL problem, and I am about to lose my mind over it. I have a table named Inventory that has a column named PartialQty which is of type DECIMAL(11,4). I have shortened my query for simplicity, but here it is. DECLARE @pqty1 DECIMAL(11,4) SELECT @pqty1 = PartialQty FROM Inventory WHERE InventoryID = @invIDPRINT @pqty1 UPDATE Inventory SET PartialQty = 6.5513 WHERE InventoryID = @invID SELECT @pqty1 = PartialQty FROM Inventory WHERE InventoryID = @invIDPRINT @pqty1 Before this query is ran, the value in PartialQty is 1.2345. If I run this 2 times in a row, this is the output I get: RUN 1: 1.2345 (1 row(s) affected) (1 row(s) affected) (1 row(s) affected) (1 row(s) affected) 6.0000
RUN 2: 6.0000 (1 row(s) affected) 6.5513
I don't understand 2 things. One is why the first run displays (1 row(s) affected) 4 times even though there is only one record with that InventoryID. And the other thing I don't understand is why the first time I run it, it loses all of the values after the decimal point. Please help, Scott
I have a table in SQL 2005 with a field that has a value of type 'money'. When values are added, the field has 4 decimal places. Is there a way that I can make it only have 2 decimal places right away? Thanks!!!
I am trying to have an Excecute SQL Task return a single row result set executed on SQL Server 2005.
The query in the Execute SQL Task is: select 735.234, 2454.123
I get a conversion error when trying to assign to SSIS variables of type Double. I have nothing configured in the "Parameter Mapping" tab. I have the two SSIS Double variables mapped to the Tesult Name 0 and 1 in the "Result Set" tab
I don't want to use a for loop enumerator since there is a single row returned.
I simply want to assign these two values to SSIS Double variables (double is the closest match)
I can't even hack this by converting the decimals as string and then using DirectCast to convert them to Double.
Hi all,I have a table called PTRANS with few columns (see create script below).I have created a view on top that this table VwTransaction (See below)I can now run this query without a problem:select * from dbo.VwTransactionwhereAssetNumber = '101001' andTransactionDate <= '7/1/2003'But when I create an index on the PTRANS table using the command below:CREATE INDEX IDX_PTRANS_CHL# ON PTRANS(CHL#)The same query that ran fine before, fails with the error:Server: Msg 242, Level 16, State 3, Line 1The conversion of a char data type to a datetime data type resulted inan out-of-range datetime value.I can run the same query by commeting out the AssetNumber clause and itworks fine. I can also run the query commenting out the TransactionDatecolumn and it works fine. But when I have both the conditions in theWHERE clause, it gives me this error. Dropping the index solves theproblem.Can anyone tell me why an index would cause a query to fail?Thanks a lot in advance,AmirCREATE TABLE [PTRANS] ([CHL#] [varchar] (100) COLLATE SQL_Latin1_General_CP1_CI_AS NULL ,[CHCENT] [numeric](2, 0) NOT NULL ,[CHYYMM] [numeric](4, 0) NOT NULL ,[CHDAY] [numeric](2, 0) NOT NULL ,[CHTC] [char] (2) COLLATE SQL_Latin1_General_CP1_CI_AS NOT NULL) ON [PRIMARY]GOCREATE VIEW dbo.vwTransactionsASSELECT CONVERT(datetime, dbo.udf_AddDashes(REPLICATE('0', 2 -LEN(CHCENT)) + CONVERT(varchar, CHCENT) + REPLICATE('0', 4 -LEN(CHYYMM))+ CONVERT(varchar, CHYYMM) + REPLICATE('0', 2 -LEN(CHDAY)) + CONVERT(varchar, CHDAY)), 20) AS TransactionDate,CHL# AS AssetNumber,CHTC AS TransactionCodeFROM dbo.PTRANSWHERE (CHCENT <> 0) AND (CHTC <> 'RA')*** Sent via Developersdex http://www.developersdex.com ***Don't just participate in USENET...get rewarded for it!
I can populate a dataTable with type double (C#) of say '1055.01' however when I save these to the CE3.5 database using a float(CE3.5) I lose the decimal portion. The 'offending' code is:
We have some columns in a table where the date is stored as 19980101 (YYYYMMDD). The data type for this column is NUMBER(8) in Oracle.
I need to copy rows from Oracle to SQL Server using SSIS. I used the Data Conversion transformation editor to change it to DT_DATE, but the rows are not being inserted to the destination.
On Error, If I fail the component, then the error is :
There was an error with input column "ORDER_DATE_CONV" (1191) on input "OLE DB Destination Input" (29). The column status returned was: "Conversion failed because the data value overflowed the specified type.".
hello all .. I have a form that includes two textboxes (Date and Version) .. When I try to insert the record I get the following error message .. seems that something wrong with my coversion (Data type)"The conversion of a char data type to a datetime data type resulted in an out-of-range datetime value.The statement has been terminated."
in my SQL database I have the date feild as datetime and the version as nvarchar(max) this is the code in the vb page .. Can you please tell me how to solve this problem?Imports System.Data.SqlClient Imports system.web.configuration
Partial Class Admin_emag_insert Inherits System.Web.UI.Page
Protected Sub Page_Load(ByVal sender As Object, ByVal e As System.EventArgs) Handles Me.Load Record_DateTextBox.Text = DateTime.Now
End Sub
Protected Sub clearButton_Click(ByVal sender As Object, ByVal e As System.EventArgs) Handles clearButton.Click Me.VersionTextBox.Text = "" End Sub
Protected Sub addButton_Click(ByVal sender As Object, ByVal e As System.EventArgs) Handles addButton.Click Dim objConnection As SqlConnection Dim objDataCommand As SqlCommand Dim ConnectionString As String Dim record_date As Date Dim version As String Dim emagSQL As String
'save form values in variables record_date = Record_DateTextBox.Text version = VersionTextBox.Text
'Create and open the connection objConnection = New SqlConnection(ConnectionString) objConnection.Open() emagSQL = "Insert into E_Magazine (Record_Date, Version ) " & _ "values('" & record_date & "','" & version & "')"
'Create and execute the command objDataCommand = New SqlCommand(emagSQL, objConnection) objDataCommand.ExecuteNonQuery() objConnection.Close()
AddMessage.Text = "A new emagazine was added successfully"
Hi,I would like to convert a dollar amount ($1,500) to represent Fifteenhundred dollars and 00/100 cents only for SQL reporting purposes. Isthis possible and can I incorporate the statement into an existingleft outer join query.Thanks in advance,Gavin