Declare Cursor For Execute Stored_procedure
Nov 17, 2006
Hello,
I am using SQL 2005 and i would like to create a cursor from executing a stored procedure (dbo.SP_getDate @Variable).
Something like this:
DECLARE Cursor1 CURSOR FOR EXECUTE dbo.SP_getDate @Variable
i get an error saying "incorrect syntax near the keyword 'EXECUTE'."
cannot get rid of the error. what am i doing wrong?
(i am trying to avoid using #tempTbl to store the results of the execute first and then doing a select on the #tempTbl)
Not sure if i am doing this right all together.
any help would be greatly appreciate.
View 1 Replies
ADVERTISEMENT
Oct 4, 2000
Is there any way to create a cursor, based on a dynamically created select_statement? Something like:
DECLARE someCRS CURSOR LOCAL FAST_FORWARD FOR @strSelect
where @strSelect is previously declared as let's say varchar.
I don't want to create a stored procedure for this.
Thanks!
View 2 Replies
View Related
Aug 13, 2006
I keep getting the message
Msg 156, Level 15, State 1, Line 3
Incorrect syntax near the keyword 'declare'.
Msg 156, Level 15, State 1, Line 4
Incorrect syntax near the keyword 'declare'.
What am I doing wrong?
declare @dbname varchar(8000),
declare @countyname varchar (200) ,
declare @sql varchar(8000)
declare county_name cursor for
select distinct county from Zipcodes
open county_name
fetch next from county_name
into @countyname
declare dbname_name cursor for
select name from sys.databases where name like 'Property%' and name <> 'PropertyCenter'
open dbname_name
fetch next from dbname_name
into @dbname
WHILE @@FETCH_STATUS = 0
BEGIN
set @sql =
'
select p.sa_property_id, z.zipcode as sa_site_zip, z.state as sa_site_state, z.city as sa_site_city, z.county as sa_site_county,@dbname ,(select @@servername) as servername, county'+@countyname+'
from zipcodes z join tbl_reply_assr_final p on z.zipcode = p.sa_site_zip'
exec (@sql)
end
set @sql = ''
fetch next from dbname_name into @dbname
fetch next from county_name into @countyname
CLOSE county_name
DEALLOCATE county_name
CLOSE dbname_name
DEALLOCATE dbname_name
View 4 Replies
View Related
Jul 23, 2002
Hello..
Can you declare a cursor with dynamic SQL?
I have a situation where the SQL for my cursor MUST be assembled in a buffer, but I cannot get the cursor declaration to accept my buffer as the SQL statement.
these attempts did not work:
DECLARE crsCursor CURSOR FOR @vchrSQL
DECLARE crsCursor CURSOR FOR (@vchrSQL)
Does anybody know if you definitely can or definitely cannot use dynamic SQL with cursors?
View 1 Replies
View Related
May 27, 2004
Hello guys,just wanted to ask a question some might percieve it as a stupid one but I don't know so I will ask anyway?
Is Declare Cursor same as Create Cursor and if not what is the major difference?
View 2 Replies
View Related
Jan 10, 2000
I have to specifiy the database name which is supplied from the user (@fixdb). I want to do something like the following 'code'
Declare SysCursor cursor for + 'select Name, ID from ' + @fixdb +'.dbo.sysobjects where xtype = "u"'
but I can't seem to come up with the right statement.
Any help greatly appreciated.
Thanks,
Judith
View 1 Replies
View Related
Jan 23, 2008
I am trying to decalare the cursor in the below stored procedure. Can any one please help me to correct the cursor declaration?? Basically, i am testing how to declare the cursor in stored procedure.
CREATE PROCEDURE STP_EMPSAL
@empno int,
@Employee_Cursor CURSOR VARYING OUTPUT
FOR SELECT empno FROM AdventureworksDW.dbo.emp
AS
OPEN Employee_Cursor;
FETCH NEXT FROM Employee_Cursor into @empno;
WHILE @@FETCH_STATUS = 0
BEGIN
BEGIN TRAN
UPDATE emp set sal= sal+ 2000 where
empno = @empno and comm is null
mgr='Scott';
FETCH NEXT FROM Employee_Cursor into @empno;
COMMIT;
END;
CLOSE Employee_Cursor;
DEALLOCATE Employee_Cursor;
View 4 Replies
View Related
Apr 27, 2006
Hi,is it possible to create a cursor from a dynamic string?Like:DECLARE @cursor nvarchar(1000)SET @cursor = N'SELECT product.product_idFROM product WHERE fund_amt > 0'DECLARE ic_uv_cursor CURSOR FOR @cursorinstead of using this--SELECT product.product_id--FROM product WHERE fund_amt > 0 -- AND mpc_product.status= 'aktiv'Havn't found anything in the net...Thanks,Peppi
View 5 Replies
View Related
Sep 9, 2014
The below cursor is giving an error
DECLARE @Table_Name NVARCHAR(MAX) ,
@Field_Name NVARCHAR(MAX) ,
@Document_Type NVARCHAR(MAX)
DECLARE @SOPCursor AS CURSOR;
SET
@SOPCursor = CURSOR FOR
[Code] ....
The @Table_Name variable is declared, If I replace the delete statement (DELETE FROM @Table_Name ) with (PRINT @table_name) it works and print the table names.
Why does the delete statement give an error ?
View 3 Replies
View Related
Sep 18, 2006
Hi,
I am declaring the cursor based on a query which is generated dynamically. but it is not working
Declare @tempSQL varchar(1000)
--- This query will be generated based on my other conditon and will be stored in a variable
set @tempsql = 'select * from orders'
declare cursor test for @tempsql
open test
This code is not working.
please suggest
Nitin
View 12 Replies
View Related
May 7, 2008
The stored procedure, below, results in this error when I try to compile...
Msg 156, Level 15, State 1, Procedure InsertImportedReportData, Line 69
Incorrect syntax near the keyword 'ORDER'.
However the select statement itself runs perfectly well as a query, no errors.
The T-SQL manual says you can't use the keywords COMPUTE, COMPUTE BY, FOR BROWSE, and INTO in a cursor select statement, but nothing about plain old ORDER BYs.
What gives with this?
Thanks in advance
R.
The code:
Code Snippet
-- ================================================
SET ANSI_NULLS ON
GO
SET QUOTED_IDENTIFIER ON
GO
IF object_id('InsertImportedReportData ') IS NOT NULL
DROP PROCEDURE InsertImportedReportData
GO
-- =============================================
-- Author: -----
-- Create date:
-- Description: inserts imported records, marking as duplicates if possible
-- =============================================
CREATE PROCEDURE InsertImportedReportData
-- Add the parameters for the stored procedure here
@importedReportID int,
@authCode varchar(12)
AS
BEGIN
DECLARE @errmsg VARCHAR(80);
-- SET NOCOUNT ON added to prevent extra result sets from
-- interfering with SELECT statements.
SET NOCOUNT ON;
--IF (@authCode <> 'TX-TEC')
--BEGIN
-- SET @errmsg = 'Unsupported reporting format:' + @authCode
-- RAISERROR(@errmsg, 11, 1);
--END
DECLARE srcRecsCursor CURSOR LOCAL
FOR (SELECT
ImportedRecordID
,ImportedReportID
,AuthorityCode
,[ID]
,[Field1] AS RecordType
,[Field2] AS FormType
,[Field3] AS ItemID
,[Field4] AS EntityCode
,[Field5] AS LastName
,[Field6] AS FirstMiddleNames
,[Field7] AS Title
,[Field8] AS Suffix
,[Field9] AS AddressLine1
,[Field10] AS AddressLine2
,[Field11] AS City
,[Field12] AS [State]
,[Field13] AS ZipFull
,[Field14] AS OutOfStatePAC
,[Field15] AS FecID
,[Field16] AS Date
,[Field17] AS Amount
,[Field18] AS [Description]
,[Field19] AS Employer
,[Field20] AS Occupation
,[Field21] AS AttorneyJob
,[Field22] AS SpouseEmployer
,[Field23] As ChildParentEmployer1
,[Field24] AS ChildParentEmployer2
,[Field25] AS InKindTravel
,[Field26] AS TravellerLastName
,[Field27] AS TravellerFirstMiddleNames
,[Field28] AS TravellerTitle
,[Field29] AS TravellerSuffix
,[Field30] AS TravelMode
,[Field31] As DptCity
,[Field32] AS DptDate
,[Field33] AS ArvCity
,[Field34] AS ArvDate
,[Field35] AS TravelPurpose
,[Field36] AS TravelRecordBackReference
FROM ImportedNativeRecords
WHERE ImportedReportID IS NOT NULL
AND ReportType IN ('RCPT','PLDG')
ORDER BY ImportedRecordID -- this should work but gives syntax error!
);
END
View 3 Replies
View Related
Oct 17, 2006
This one has me stumped.
I created an updateable partioned view of a very large table. Now I get an error when I attempt to declare a CURSOR that SELECTs from the view, and a FOR UPDATE argument is in the declaration.
There error generated is:
Server: Msg 16957, Level 16, State 4, Line 3
FOR UPDATE cannot be specified on a READ ONLY cursor
Here is the cursor declaration:
declare some_cursor CURSOR
for
select *
from part_view
FOR UPDATE
Any ideas, guys? Thanks in advance for knocking your head against this one.
PS: Since I tested the updateability of the view there are no issues with primary keys, uniqueness, or indexes missing. Also, unfortunately, the dreaded cursor is requried, so set based alternatives are not an option - it's from within Peoplesoft.
View 2 Replies
View Related
Jan 17, 2008
Hi all,
In my SQL Server Management Studio Express (SSMSE), I executed the following sql code suuccessfully:
--insertNewRocord.sql--
USE shcDB
GO
CREATE PROC sp_insertNewRecord @procPersonID int,
@procFirstName nvarchar(20),
@procLastName nvarchar(20),
@procAddress nvarchar(50),
@procCity nvarchar(20),
@procState nvarchar(20),
@procZipCode nvarchar(20),
@procEmail nvarchar(50)
AS INSERT INTO MyFriends
VALUES (@procPersonID, @procFirstName, @procLastName, @procAddress,
@procCity, @procState, @procZipCode, @procEmail)
GO
EXEC sp_insertNewRecord 7, 'Peter', 'Wang', '678 Old St', 'Detroit',
'Michigon', '67899', 'PeterWang@yahoo.com'
GO
=======================================================================
Now, I want to insert a new record into the dbo.Friends table of my shcDB by executing the following T-SQL and Visual Basic 2005 codes that are programmed in a VB2005 Express project "CallshcDBspWithAdoNet":
--Form1.vb--
Imports System.Data
Imports System.Data.SqlClient
Imports System.Data.SqlTypes
Public Class Form1
Public Sub InsertNewFriend()
Dim connectionString As String = "Integrated Security-SSPI;Persist Security Info=False;" + _
"Initial Catalog=shcDB;Data Source=.SQLEXPRESS"
Dim connection As SqlConnection = New SqlConnection(connectionString)
connection.Open()
Try
Dim command As SqlCommand = New SqlCommand("sp_InsertNewRecord", connection)
command.CommandType = CommandType.StoredProcedure
EXEC sp_insertNewRecord 6, 'Craig', 'Utley', '5577 Baltimore Ave',
'Ellicott City', 'MD', '21045', 'CraigUtley@yahoo.com'
Console.WriteLine("Row inserted: " + _
command.ExecuteNonQuery().ToString)
Catch ex As Exception
Console.WriteLine(ex.Message)
Throw
Finally
connection.Close()
End Try
End Sub
End Class
===========================================================
I ran the above project in VB 2005 Express and I got the following 5 errors:
1. Name 'EXEC' is not declared (in Line 16 of Form1.vb)
2. Method arguments must be enclosed in parentheses (in Line 16 of Form1.vb)
3. Name 'sd-insertNewRecord' is not declared. (in Line 16 of Form1.vb)
4.Comma, ')', or a valid expression continuation expected (in Line 16 of Form1.vb)
5. Expression expected (in Line 16 of Form1.vb)
============================================================
I know that "EXEC sp_insertNewRecord 6, 'Craig', 'Utley', '5577 Baltimore Ave',
'Ellicott City', 'MD', '21045', 'CraigUtley@yahoo.com' "in Line 16 of Form1.vb is grossly in error.
But I am new in doing the programming of T-SQL in VB 2005 Express and I am not able to change it.
Please help and advise me how to correct these problems.
Thanks in advance,
Scott Chang
View 22 Replies
View Related
Jun 26, 2014
I currently have a process that has a cursor. It takes data and executes a stored procedure with parameters.
declare @tmpmsg varchar(max)
declare @tmpmsgprefix varchar(max)
declare @cms varchar(20)
create table #tmpIntegrity(matternum varchar(10),ClientName varchar(20))
insert into #tmpIntegrity(matternum,ClientName)
[Code] ....
Output from code:
The following Client1 accounts have A1 value and a blank A2 field. Accounts: Ac1,Ac2,Ac3,Ac4,
The following Client2 accounts have A1 value and a blank A2 field. Accounts: Ac1,Ac2,Ac3,
The following Client3 accounts have A1 value and a blank A2 field. Accounts: Ac1,Ac2,Ac3,
The following Client4 accounts have A1 value and a blank A2 field. Accounts:
Desired output (no trailing comma):
The following Client1 accounts have A1 value and a blank A2 field. Accounts: Ac1,Ac2,Ac3,Ac4
The following Client2 accounts have A1 value and a blank A2 field. Accounts: Ac1,Ac2,Ac3
The following Client3 accounts have A1 value and a blank A2 field. Accounts: Ac1,Ac2,Ac3
The following Client4 accounts have A1 value and a blank A2 field. Accounts:
Next, how do I call the stored procedure without doing it RBAR? Is that possible?
execute usp_IMessage 832,101,@tmpmsgprefix,@tmpmsg,','
View 5 Replies
View Related
Apr 7, 2008
Dear All
I have no idea to write a store procedure or only query to pass a string parameter more than 4000 characters into execute() and return result for FETCH and Cursor.
Here is my query sample for yours to understand.
SET NOCOUNT ON
DECLARE @ITEMCODE int, @ITEMNAME nvarchar(50), @message varchar(80), @qstring varchar(8000)
Set @qstring = 'select itemcode from oitm union
select itemcode from oitm union
select itemcode from oitm union
select itemcode from oitm union
select itemcode from oitm union
select itemcode from oitm union
select itemcode from oitm union
select itemcode from oitm union
select itemcode from oitm union
select itemcode from oitm union
select itemcode from oitm union
select itemcode from oitm union
select itemcode from oitm union
select itemcode from oitm union
select itemcode from oitm union
select itemcode from oitm union
select itemcode from oitm union
select itemcode from oitm union
select itemcode from oitm union
select itemcode from oitm union
select itemcode from oitm union
select itemcode from oitm union
select itemcode from oitm union
select itemcode from oitm union
select itemcode from oitm union
select itemcode from oitm union
select itemcode from oitm union
select itemcode from oitm union
select itemcode from oitm union
select itemcode from oitm union
select itemcode from oitm union
select itemcode from oitm union
select itemcode from oitm union
select itemcode from oitm union
select itemcode from oitm union
select itemcode from oitm union
select itemcode from oitm union
select itemcode from oitm union
select itemcode from oitm union
select itemcode from oitm union
select itemcode from oitm union
select itemcode from oitm union
select itemcode from oitm union
select itemcode from oitm union
select itemcode from oitm union
select itemcode from oitm union
select itemcode from oitm union
select itemcode from oitm union
select itemcode from oitm union
select itemcode from oitm union
select itemcode from oitm union
select itemcode from oitm union
select itemcode from oitm union
select itemcode from oitm union
select itemcode from oitm union
select itemcode from oitm union
select itemcode from oitm union
select itemcode from oitm union
select itemcode from oitm union
select itemcode from oitm union
select itemcode from oitm union
select itemcode from oitm union
select itemcode from oitm union
select itemcode from oitm union
select itemcode from oitm union
select itemcode from oitm union
select itemcode from oitm union
select itemcode from oitm union
select itemcode from oitm union
select itemcode from oitm union
select itemcode from oitm union
select itemcode from oitm union
select itemcode from oitm union
select itemcode from oitm union
select itemcode from oitm union
select itemcode from oitm union
select itemcode from oitm union
select itemcode from oitm union
select itemcode from oitm union
select itemcode from oitm union
select itemcode from oitm union
select itemcode from oitm union
select itemcode from oitm union
select itemcode from oitm union
select itemcode from oitm union
select itemcode from oitm union
select itemcode from oitm union
select itemcode from oitm union
select itemcode from oitm union
select itemcode from oitm union
select itemcode from oitm union
select itemcode from oitm union
select itemcode from oitm union
select itemcode from oitm union
select itemcode from oitm union
select itemcode from oitm union
select itemcode from oitm union
select itemcode from oitm union
select itemcode from oitm union
select itemcode from oitm union
select itemcode from oitm union
select itemcode from oitm union
select itemcode from oitm union
select itemcode from oitm union
select itemcode from oitm union
select itemcode from oitm union
select itemcode from oitm union
select itemcode from oitm union
select itemcode from oitm union
select itemcode from oitm union
select itemcode from oitm union
select itemcode from oitm union
select itemcode from oitm union
select itemcode from oitm union
select itemcode from oitm union
select itemcode from oitm union
select itemcode from oitm union
select itemcode from oitm union
select itemcode from oitm union
select itemcode from oitm union
select itemcode from oitm union
select itemcode from oitm union
select itemcode from oitm union
select itemcode from oitm union
select itemcode from oitm union
select itemcode from oitm union
select itemcode from oitm union
select itemcode from oitm union
select itemcode from oitm union
select itemcode from oitm union
select itemcode from oitm union
select itemcode from oitm union
select itemcode from oitm union
select itemcode from oitm union
select itemcode from oitm union
select itemcode from oitm union
select itemcode from oitm union
select itemcode from oitm union
select itemcode from oitm union
select itemcode from oitm union
select itemcode from oitm union
select itemcode from oitm union
select itemcode from oitm union
select itemcode from oitm union
select itemcode from oitm union
select itemcode from oitm union
select itemcode from oitm union
select itemcode from oitm union
select itemcode from oitm union
select itemcode from oitm union
select itemcode from oitm union
select itemcode from oitm union
select itemcode from oitm union
select itemcode from oitm union
select itemcode from oitm union
select itemcode from oitm union
select itemcode from oitm union
select itemcode from oitm union
select itemcode from oitm union
select itemcode from oitm union
select itemcode from oitm union
select itemcode from oitm union
select itemcode from oitm union
select itemcode from oitm union
select itemcode from oitm union
select itemcode from oitm union
select itemcode from oitm union
select itemcode from oitm union
select itemcode from oitm union
select itemcode from oitm union
select itemcode from oitm union
select itemcode from oitm union
select itemcode from oitm union
select itemcode from oitm union
select itemcode from oitm union
select itemcode from oitm union
select itemcode from oitm union
select itemcode from oitm union
select itemcode from oitm union
select itemcode from oitm union
select itemcode from oitm union
select itemcode from oitm union
select itemcode from oitm union
select itemcode from oitm union
select itemcode from oitm union
select itemcode from oitm union
select itemcode from oitm union
select itemcode from oitm union
select itemcode from oitm union
select itemcode from oitm union
select itemcode from oitm union
select itemcode from oitm union
select itemcode from oitm union
select itemcode from oitm union
select itemcode from oitm union
select itemcode from oitm union
select itemcode from oitm union
select itemcode from oitm union
select itemcode from oitm union
select itemcode from oitm union
select itemcode from oitm union
select itemcode from oitm union
select itemcode from oitm union
select itemcode from oitm union
select itemcode from oitm union
select itemcode from oitm union
select itemcode from oitm union
select itemcode from oitm union
select itemcode from oitm union
select itemcode from oitm union
select itemcode from oitm union
select itemcode from oitm union
select itemcode from oitm union
select itemcode from oitm union
select itemcode from oitm union
select itemcode from oitm union
select itemcode from oitm union
select itemcode from oitm union
select itemcode from oitm union
select itemcode from oitm union
select itemcode from oitm union
select itemcode from oitm union
select itemcode from oitm union
select itemcode from oitm union
select itemcode from oitm union
select itemcode from oitm union
select itemcode from oitm union
select itemcode from oitm'
PRINT '-------- ITEM Products Report --------'
DECLARE ITEM_cursor CURSOR FOR
execute (@qstring)
OPEN ITEM_cursor
FETCH NEXT FROM ITEM_cursor
INTO @ITEMCODE
WHILE @@FETCH_STATUS = 0
BEGIN
PRINT ' '
SELECT @message = '----- Products From ITEM: ' +
@ITEMNAME
PRINT @message
-- Get the next ITEM.
FETCH NEXT FROM ITEM_cursor
INTO @ITEMcode
END
CLOSE ITEM_cursor
DEALLOCATE ITEM_cursor
Why i use @qstring? It is because the query will be changed by different critiera.
Regards
Edmund
View 6 Replies
View Related
Aug 12, 2015
In MSDN file I read about static cursor
STATIC
Defines a cursor that makes a temporary copy of the data to be used by the cursor. All requests to the cursor are answered from this temporary table in
tempdb; therefore, modifications made to base tables are not reflected in the data returned by fetches made to this cursor, and this cursor does not allow modifications
It say's that modifications is not allowed in the static cursor. I have a questions regarding that
Static Cursor
declare ll cursor global static
for select name, salary from ag
open ll
fetch from ll
while @@FETCH_STATUS=0
fetch from ll
update ag set salary=200 where 1=1
close ll
deallocate ll
In "AG" table, "SALARY" was 100 for all the entries. When I run the Cursor, it showed the salary value as "100" correctly.After the cursor was closed, I run the query select * from AG.But the result had updated to salary 200 as given in the cursor. file says modifications is not allowed in the static cursor.But I am able to update the data using static cursor.
View 3 Replies
View Related
Jul 20, 2005
Hello,I have a test database with table A containing 10,000 rows and a tableB containing 100,000 rows. Rows in B are "children" of rows in A -each row in A has 10 related rows in B (ie. B has a foreign key to A).Using ODBC I am executing the following loop 10,000 times, expressedbelow in pseudo-code:"select * from A order by a_pk option (fast 1)""fetch from A result set""select * from B where where fk_to_a = 'xxx' order by b_pk option(fast 1)""fetch from B result set" repeated 10 timesIn the above psueod-code 'xxx' is the primary key of the current Arow. NOTE: it is not a mistake that we are repeatedly doing the Aquery and retrieving only the first row.When the queries use fast-forward-only cursors this takes about 2.5minutes. When the queries use dynamic cursors this takes about 1 hour.Does anyone know why the dynamic cursor is killing performance?Because of the SQL Server ODBC driver it is not possible to havenested/multiple fast-forward-only cursors, hence I need to exploreother alternatives.I can only assume that a different query plan is getting constructedfor the dynamic cursor case versus the fast forward only cursor, but Ihave no way of finding out what that query plan is.All help appreciated.Kevin
View 1 Replies
View Related
Sep 20, 2007
I'm trying to implement a sp_MSforeachsp howvever when I call sp_MSforeach_worker
I get the following error can you please explain this problem to me so I can over come the issue.
Msg 16958, Level 16, State 3, Procedure sp_MSforeach_worker, Line 31
Could not complete cursor operation because the set options have changed since the cursor was declared.
Msg 16958, Level 16, State 3, Procedure sp_MSforeach_worker, Line 32
Could not complete cursor operation because the set options have changed since the cursor was declared.
Msg 16917, Level 16, State 1, Procedure sp_MSforeach_worker, Line 153
Cursor is not open.
here is the stored procedure:
Alter PROCEDURE [dbo].[sp_MSforeachsp]
@command1 nvarchar(2000)
, @replacechar nchar(1) = N'?'
, @command2 nvarchar(2000) = null
, @command3 nvarchar(2000) = null
, @whereand nvarchar(2000) = null
, @precommand nvarchar(2000) = null
, @postcommand nvarchar(2000) = null
AS
/* This procedure belongs in the "master" database so it is acessible to all databases */
/* This proc returns one or more rows for each stored procedure */
/* @precommand and @postcommand may be used to force a single result set via a temp table. */
declare @retval int
if (@precommand is not null) EXECUTE(@precommand)
/* Create the select */
EXECUTE(N'declare hCForEachTable cursor global for
SELECT QUOTENAME(SPECIFIC_SCHEMA)+''.''+QUOTENAME(ROUTINE_NAME)
FROM INFORMATION_SCHEMA.ROUTINES
WHERE ROUTINE_TYPE = ''PROCEDURE''
AND OBJECTPROPERTY(OBJECT_ID(QUOTENAME(SPECIFIC_SCHEMA)+''.''+QUOTENAME(ROUTINE_NAME)), ''IsMSShipped'') = 0 '
+ @whereand)
select @retval = @@error
if (@retval = 0)
EXECUTE @retval = [dbo].sp_MSforeach_worker @command1, @replacechar, @command2, @command3, 0
if (@retval = 0 and @postcommand is not null)
EXECUTE(@postcommand)
RETURN @retval
GO
example useage:
EXEC sp_MSforeachsp @command1="PRINT '?' GRANT EXECUTE ON ? TO [superuser]"
GO
View 7 Replies
View Related
Sep 25, 2007
part 1
Declare @SQLCMD varchar(5000)
DECLARE @DBNAME VARCHAR (5000)
DECLARE DBCur CURSOR FOR
SELECT U_OB_DB FROM [@OB_TB04_COMPDATA]
OPEN DBCur
FETCH NEXT FROM DBCur INTO @DBNAME
WHILE @@FETCH_STATUS = 0
BEGIN
SELECT @SQLCMD = 'SELECT T0.CARDCODE, T0.U_OB_TID AS TRANSID, T0.DOCNUM AS INV_NO, ' +
+ 'T0.DOCDATE AS INV_DATE, T0.DOCTOTAL AS INV_AMT, T0.U_OB_DONO AS DONO ' +
+ 'FROM ' + @DBNAME + '.dbo.OINV T0 WHERE T0.U_OB_TID IS NOT NULL'
EXEC(@SQLCMD)
PRINT @SQLCMD
FETCH NEXT FROM DBCur INTO @DBNAME
END
CLOSE DBCur
DEALLOCATE DBCur
Part 2
SELECT
T4.U_OB_PCOMP AS PARENTCOMP, T0.CARDCODE, T0.CARDNAME, ISNULL(T0.U_OB_TID,'') AS TRANSID, T0.DOCNUM AS SONO, T0.DOCDATE AS SODATE,
SUM(T1.QUANTITY) AS SOQTY, T0.DOCTOTAL - T0.TOTALEXPNS AS SO_AMT, T3.DOCNUM AS DONO, T3.DOCDATE AS DO_DATE,
SUM(T2.QUANTITY) AS DOQTY, T3.DOCTOTAL - T3.TOTALEXPNS AS DO_AMT
INTO #MAIN
FROM
ORDR T0
JOIN RDR1 T1 ON T0.DOCENTRY = T1.DOCENTRY
LEFT JOIN DLN1 T2 ON T1.DOCENTRY = T2.BASEENTRY AND T1.LINENUM = T2.BASELINE AND T2.BASETYPE = T0.OBJTYPE
LEFT JOIN ODLN T3 ON T2.DOCENTRY = T3.DOCENTRY
LEFT JOIN OCRD T4 ON T0.CARDCODE = T4.CARDCODE
WHERE ISNULL(T0.U_OB_TID,0) <> 0
GROUP BY T4.U_OB_PCOMP, T0.CARDCODE,T0.CARDNAME, T0.U_OB_TID, T0.DOCNUM, T0.DOCDATE, T3.DOCNUM, T3.DOCDATE, T0.DOCTOTAL, T3.DOCTOTAL, T3.TOTALEXPNS, T0.TOTALEXPNS
my question is,
how to join the part 1 n part 2?
is there posibility?
View 1 Replies
View Related
Aug 6, 2007
Can I use DECLARE in SQL 2005 Compact, and if not, how do I do INSERTs into tables which have columns with Primary Key constraints?
Matt
View 4 Replies
View Related
Aug 23, 2006
I am trying to get a grasp on the Sql Stored procedures it seems i dont really understnad what DECLARE @Date DateTime means??? I mean i think it means that i am just declaring a varible name Date that will hold a DateTime Value??? is that correct or is it more to it????
CREATE PROCEDURE dbo.Tracking_GetStatus
AS
DECLARE @Date DateTime
DECLARE @Begining DateTime
DECLARE @Ending DateTime
SET @Date = GETDATE()
SET @Begining = DATEADD(ss,(DATEPART(ss,@Date)*-1),
DATEADD(mi,(DATEPART(mi,@Date)*-1),
DATEADD(hh,(DATEPART(hh,@Date)*-1),@Date)))
SET @Ending = DATEADD(ss,-1,
DATEADD(dd,1,DATEADD(ss,(DATEPART(ss,@Date)*-1),
DATEADD(mi,(DATEPART(mi,@Date)*-1),
DATEADD(hh,(DATEPART(hh,@Date)*-1),@Date)))))
SELECT
Vehicl,
UpdateTi
XCoord,
YCoord,
Status
FROM Track
WHERE UpdateTime >= @Begining
AND UpdateTime <= @Ending
RETURN
GO
View 1 Replies
View Related
Aug 25, 2006
Hi allHow do i declare a recordset and fetch records from an sql server?TIAGuy
View 3 Replies
View Related
Oct 26, 2007
Hi everyone,
I am getting that infamous message on an INSERT Sql query. I am doing everything right by the looks of it. All variables are either passed in through a custom form, or else declared and initialised in the body of the script.
I post the relevent code below:
SQLsqlInsertEmail = "INSERT INTO CandidateLogins (SiteID, LoginName, CandidateEmail, DateRegistered) " & _" VALUES (@SiteID, @LoginName, @CandidateEmail, @DateRegistered); SELECT SCOPE_IDENTITY()"Try sqlSetCandidateEmail.Parameters.Add(New SqlParameter("@SiteID", SqlDbType.Int)) sqlSetCandidateEmail.Parameters("@SiteID").Value = SiteID sqlSetCandidateEmail.Parameters.Add(New SqlParameter("@LoginName", SqlDbType.VarChar)) sqlSetCandidateEmail.Parameters("@LoginName").Value = userName sqlSetCandidateEmail.Parameters.Add(New SqlParameter("@CandidateEmail", SqlDbType.VarChar)) sqlSetCandidateEmail.Parameters("@CandidateEmail").Value = email sqlSetCandidateEmail.Parameters.Add(New SqlParameter("@DateRegistered", SqlDbType.DateTime)) sqlSetCandidateEmail.Parameters("@DateRegistered").Value = DateRegistered sqlSetCandidateEmail = New SqlCommand(sqlInsertEmail, C4LConnection)
C4LConnection.Open() CandidateID = sqlSetCandidateEmail.ExecuteScalar()
Catch Exp As SqlException lblResults.Visible = True lblResults.Text = "Unable to Register Jobseeker: " & Exp.MessageFinallyC4LConnection.Close()End Try
All the variables passed into the SQL statement are initialised, with SiteID beign set to '0', rather than Null (none of the fields are Nullable in the database table) and I have checked that the SqlDbType's correspend to the Table Definition
So far as I can discern, everything is correct and as can be seen, I am not using a stored procedure in this instance, but the script falls over be producing the error message "Must Declare Scalar @SiteID", even though SiteID is declared as Int32 further up in the script.
Any help would be appreciated.
View 8 Replies
View Related
Mar 3, 2008
Need a little help! I am trying to insert ListItems values from a DropDownList into a database table. However in the code behind I am continuosly met with the error Name 'ddltest' is not declared. As you can see from the code below ddltest is an object with the ID ddltest. What am I doing wrong?
Protected Sub ddltest_SelectedIndexChanged(ByVal sender As Object, ByVal e As System.EventArgs)Dim MyVar As String = ddltest.SelectedItem.Value
If MyVar = "" Then
ErrorMessage.Text = "Please select a test"
Else
'Insert selection into databaseDim oConnection As New SqlConnection
Dim oCommand As SqlCommand
Dim sConnString As String
Dim sSQL As String
sConnString = "Data Source=.SQLEXPRESS;AttachDbFilename=|DataDirectory|xxxxx.mdf;Integrated Security=True;User Instance=false"oConnection = New SqlConnection(sConnString)
sSQL = "INSERT INTO testDB(Myxxxx) Values (@Myxxxx)"
oConnection.Open()oCommand = New SqlCommand(sSQL, oConnection)oCommand.Parameters.Add(New SqlParameter("@Myxxxx", MyVar))
oCommand.ExecuteNonQuery()
oConnection.Close()
ErrorMessage.Text = "You selected " & MyVar & " and it has been added to the database."
End If
End Sub
<asp:TemplateField HeaderText="Test">
<EditItemTemplate>
<asp:DropDownList ID="ddltest" runat="server" AutoPostBack="True" OnSelectedIndexChanged="ddltest_SelectedIndexChanged" >
<asp:ListItem Selected="True" Value="" ><-- Please Select a test --></asp:ListItem><asp:ListItem Value="1">1</asp:ListItem>
<asp:ListItem Value="2">2</asp:ListItem>
<asp:ListItem Value="3">3</asp:ListItem>
<asp:ListItem Value="4">4</asp:ListItem>
<asp:ListItem Value="5" >5</asp:ListItem>
</asp:DropDownList>
</EditItemTemplate>
</asp:TemplateField>
View 7 Replies
View Related
Dec 17, 2001
Hi,
I want to store more than 8000 characters. Ideally it might have been fine if decalre @var text had worked for me.
Can anyone tell is it possible....
thanks,
sajai.
View 3 Replies
View Related
May 5, 2008
OMG i'm so stupid, i edited my original post instead of replying!!
I was wondering if there was away to write a stored procedure where I concatenate several columns to create a Phrase and use that Phrase as a new value to do a second search in another table.
Example.
Table 1.
Column1 (Modem) Column2 (Highspeed) Column3 (Black)
Concatenated to be MODEM HIGHSPEED BLACK.
The 2nd table has the concatenated value as it's own column and 2nd column for the number in Inventory.
Column1 (MODEM HIGHSPEED BLACK) Column2 (44)
View 7 Replies
View Related
May 29, 2008
When I run this script.It gives me an error that I need to "Delcare @pc2" Why? Please help.
Declare @pc2 Table
([prop_char_typ_code] [varchar](5) NOT NULL,
[tax_year] [varchar](4) NOT NULL,
[property_id] [int] NOT NULL,
[id] [int] IDENTITY(1,1) NOT NULL,
[value] [varchar](100) NULL,
[prop_segment_id] [int] NULL)
Insert into @pc2
([prop_char_typ_code],
[tax_year],
[property_id],
[id],
[value],
[prop_segment_id])
Select
[prop_char_typ_code],
[tax_year],
[property_id],
[id],
[value],
[prop_segment_id]
from property_char
Go
SELECT 'ACRES', '2008', property_char.property_id, ROUND(property_char.value,0)
FROM
property_char INNER JOIN
property ON property_char.property_id = property.id INNER JOIN
property_char AS @pc2 ON property.id = @pc2.property_id INNER JOIN
prop_valuation ON property.id = prop_valuation.property_id INNER JOIN
val_component ON property.id = val_component.property_id
WHERE property_char.property_id < 81695 AND
property_char.property_id = property.id AND
property_char.prop_char_typ_code = 'SIZE' AND
property_char.tax_year = '2008' AND
@pc2.prop_char_typ_code = 'USECD' AND
(@pc2.value not in ('85','86','87','88','95') AND --( <=== Review list of Usecodes))
@pc2.tax_year = '2008' AND
@pc2.property_id = property.id AND
property.pact_code = 'REAL' AND
(property.eff_to_date is null OR property.eff_to_date >= getdate())AND
prop_valuation.property_id = property.id AND
prop_valuation.tax_year = '2008' AND
prop_valuation.local_assed_ind = 'Y' AND
val_component.value_type = 'MKLND' AND
val_component.property_id = property.id AND
val_component.tax_year = '2008' AND
val_component.modified_value > 0)AND
NOT EXISTS (Select 'z' from parcel_exclude where property.parcel_number = parcel_exclude.parcel_number AND special_assessment = 'CD')
View 13 Replies
View Related
Oct 13, 2014
I know how to set a variable for the entire query, but how do I set one per row?
I have one query which is growing beyond my ability to understand/maintain it. I factor in the sale price of an item based on cost, our markup, shipping & channel fees. The problem is that each one of these has it's own variability. I would like to be able to store inline calculations as a variable such that I can call & add them. Example:
My code currently looks like this
CREATE TABLE #tempPrice (
product NVARCHAR(40)
,price DECIMAL(18,2)
)
insert into #tempPrice (product,price) values('prod1','18.00')
[Code] ....
I would like to be able to work with it this way:
SELECT
product
,price
,Cast(price * 1.1 as decimal(18,2)) as markup
,@markup + 5 as 'markup-and-shipping' -- <-- This factors in all of the previous calculations, plus something new.
FROM #tempPrice
I use Microsoft SQL 2008
View 7 Replies
View Related
Dec 2, 2007
Dear All,
actually, in our application, we are using so many temporary local variables like @table_name....
and based on these local variables, we are making joins with the regular adtabase tables. is it better thing instead of temp tables?
what exactly i want to know is,
@table_name,#temp_table,##temp_table.....
in these three processes, which one is the best one...
thanks in advance
Vinod
Even you learn 1%, Learn it with 100% confidence.
View 3 Replies
View Related
Feb 10, 2008
declare @fdas as varchar(10)
set @fdas = 'master'
use @fdas
i try to execute this one it does not work
said that Msg 102, Level 15, State 1, Line 4
Incorrect syntax near '@fdas'. how to fix that one? by not replacing the @fdas
but i got master database
------------
what is the difference actually between
use master than the first querry?
arifliminto86
View 1 Replies
View Related
Jul 20, 2005
Hi, I'm trying to create a function that returns a table, however I wantto use a local variable in there and enterprise manager ain't liking it!The error I get is number 156 'incorrect syntax near the keyword'declare'.. hopefully this is just a simple thing where I've put it inthe wrong place.The code follows:CREATE FUNCTION AFGroupedTotals (@campaign nvarchar(30),@datefromsmalldatetime, @dateto smalldatetime, @prospect nvarchar(30), @typenvarchar(20))RETURNS TABLE ASRETURNdeclare @set nvarchar(150)select "Total Pledged" as info, sum(total) as totFROM AFresponseTotals (@campaign, @datefrom, @dateto,@prospect)Cheers for any help,Chris
View 2 Replies
View Related
Jan 11, 2008
Declare @DBName varchar(25)
select @DBName = 'Production'
Select @DBName = @DBName + '.dbo.'+'sysfiles'
select @DBName
select * from @DBName
When I executes above lines of code in query analyser it give me an error like :
Server: Msg 137, Level 15, State 2, Line 5
Must declare the variable '@DBName'.
give me solution as soon as possible
Thanks
Aric
View 6 Replies
View Related
Oct 10, 2006
In a previous life, for each variable that we passed into a query, we would set -1 to the default for all so that when we converted it to an SP, we could query a specific dataset or or all. The following is a sample bit of code, I can not for the life of me remember how to pull back all using -1.
The following is the code that I currently have, it's a simplified version of the total SP that I am trying to use, but enough to give you the idea of what I am trying to do.
The MemberId field is a varchar(20) in the table.
Create procedure sp_GetClaims_BY_MemberID
@Memberid varchar (50)
as
Select top 100 * from [QICC-TEST].dbo.tblClaims_eligible
where Membid = @memberid
EXEC sp_GetClaims_BY_MemberID '99999999999'
The above SP works fine, I just need to be able to modify it so that I can pull back all records for all member id's, any suggestions?
I am currently working in SQL 2000.
View 3 Replies
View Related
